Find Message VL 324 in programs / function modules etc.

Hi,
I'm looking for the message 324 Message Class VL
Have anyone an idea how can I find it. Over SE80 ... search no entries found.
Thanks
Holger

Hi ,
If its dynamically triggered we cannot navigate thru message no , and i know message class VL for Delivery , so i search in that VL01n Program.
cheer and njoy SAP.
Regards
Prabhu

Similar Messages

Finding number of lines in a program/function module

Hi Expets,
I would like to know is there any way to find the number of code lines in a ABAP program/function module.
Additionally, can i extend this to a package such that the utility will find the number of codelines in all the programs/function modules/include programs in that package.
Any hints regarding the same would be appreciated.
Regards,
Ramanath

1. First using Read report to load the source code to your internal table.
2. Using SCAN statement to do analysis about the source code. pls refer to the sap keyword help about "SCAN".
Syntax Diagram
SCAN
Note
This statement is for internal use only.
It cannot be used in application programs.
Variants:
1. SCAN ABAP-SOURCE itab1 ...TOKENS INTO itab2
                       ...STATEMENTS INTO itab3.
2. SCAN AND CHECK ABAP-SOURCE itab1 ...RESULT INTO itab2.
Variant 1
SCAN ABAP-SOURCE itab1 ...TOKENS INTO itab2
                       ...STATEMENTS INTO itab3.
Parts marked with " ..." are interchangeable
Extras:
1. ... FROM n1
2. ... TO   n2
3. ... KEYWORDS   FROM itab4
4. ... LEVELS     INTO itab5
5. ... STRUCTURES INTO itab6
6. ... OVERFLOW INTO c1
7. ... WITH ANALYSIS
8. ... WITH COMMENTS
9. ... WITH INCLUDES [IMPLEMENTATIONS FROM itab]
10. ... WITH TYPE-POOLS
11. ... WITH LIST TOKENIZATION
12. ... PRESERVING IDENTIFIER ESCAPING
13. ... WITHOUT TRMAC
14. ... [INCLUDE] PROGRAM FROM c2
15. ... INCLUDE INTO c3
16. ... MESSAGE INTO c4
17. ... WORD    INTO c5
18. ... LINE    INTO n3
19. ... OFFSET INTO n4
20. ... WITH EXPLICIT ENHANCEMENTS [IMPLEMENTATIONS FROM itab]
21. ... FRAME PROGRAM FROM c2
22. ... ENHANCEMENTS INTO itab

Exchange rate, plan exchange rate Programs & Function modules in SAP ....

Hi Friends,
Could anybody please tell me what are the " Exchange rate " & Plan exchange rate " standard programs, function modules avaialble in SAP .
Thanks in advance,
Ramesh.

Check via transaction OB07 (or SPRO - General Settings - Currencies - Check exchange rate types) usually you will find a "M" average exchange rate (which is used operationally everywhere in Logistics) and a "P" planned exchange rate (used for cost planning)
Exchange rates are maintained via transaction OB08 (or SPRO, same tree - last node - Enter exchange rates)
When programming, use tables TCUR* or FM of function groups like SCUR "Translation of Currency Amounts etc." (CONVERT_TO_FOREIGN_CURRENCY, CONVERT_TO_LOCAL_CURRENCY and READ_EXCHANGE_RATE among others)
Regards,
Raymond

Exchange rate, Plan exchange rate Programs & Function modules in SAPBW ....

Hi Friends,
Could anybody please tell me what are the " Exchange rate, & Plan exchange rate " Programs & Function modules.
If any customized also , I can do modify and i will use it.
Thanks in advance,
Ramesh

Hi there
Exchange rates are used for currency conversion rules in queries, data loads, etc.
You can export exchange rates from R/3 (or other system) to SAP BI, and change them or define your own exchange rates.
For planning, you can create exchange rates specifically for that purpose.
In currecny conversion rules you can tell the system which exchange rate to use (for example EURX from EUR->USD)
To view/mantain exchange rates go to transaction SPRO->SAP Reference IMG->SAP Netweaver->General Settings->Currencies->Enter Exchange Rates
Diogo.

ABAP program/Function module to assign the roles in SU01

Hi,
Is there any ABAP program/function module to assign the roles in SU01. And program/function module which does all teh SU01 related activities.
Thanks and Regards,
Rashmi

Hello,
Check the function modules that start with BAPI_USER*
To assign roles :
BAPI_USER_ACTGROUPS_ASSIGN
To assign profiles :
BAPI_USER_PROFILES_ASSIGN
To change user's metadata (name, settings, ... other SU01 functions) :
BAPI_USER_CHANGE
Success.
Wim

Copy of Message Mapping between SW-Components: Function Module undefined

Hi Gurus,
we want to copy a Message Mapping from one Software Component to an other. We right click on it and say "copy to" and choose the Target Softwarecomponent and Namespace. When we say ok.. we got an error "Function Module Undefined (FUNCMODL_UNDEF)"
Has anybody an idea what can be wrong?
Big Thanks in Advance

Hi Everybody. Thanks for your fast replies.
I have played a bit with the PI System and ihave the following Situation
SW-T (Target SWC)
SW-A (Source A)
SW-B (Source B)
SW-A Copy to SW-T without Dependencies --> Error Function Model Undefined
SW-A Copy to SW-T with Dependecies --> It works correct
SW-B Copy to SW-T without Dependencies --> It works correct.
The Strange Thing is, if i Copy SW-A to SW-T without Dependencies i get the Error but a Message Mapping with the Correct Name is created, but it is empty. IT has no content. For me this looks like an Program Error?!??!

How to find download and convert pdf format function module for a script

Hi,
I have script requirement its already fixed with nace tcode and when we run output type in tcode va02 its generatinga mail with attaching script ouput in pdf format. Now i want find how that script generating pdf format and attaching to mail there in driver program no any function modules using for that.
So anyone can help me for this finding.
Thanks.

Dear Pradeep,
Use FM: CONVERT_OTF, this FM converts PDF output. After use the FM: SX_TABLE_LINE_WIDTH_CHANGE FOR convert line width 255.
Regards,
Abbas.

Find Triggered report name in the function module.

Hi All,
A function module is being called by many Reports say (100). Now the question is, I need to find out the Triggered report name in the function module where I can do required logic change based on the report. I cannot include an import parameter in the function module to capture the Report name, for this solution I need to change 100 reports. Is there any better way to find the Triggered report name in the Function Module?
thanks in advance.
ravi

Try system parameter SY-CPROG.

Message handling in remote enabled function module .

Hello experts ,
I am creating a remote enabled function module which must return a warning message based on certain condition . Inorder to meet the requirement I have added this line in the Fm's source code :
" Message Wxx(message class) with a ."
But when I am trying to use it , the above given message is dispalyed as an error message . Could you please let me know where am I going wrong . TIA.
Regards,
Prakrita Kapoor.

Hi Prakrita,
Try building below code within the RFC after you have added return structure in your RFC parameters.
IF sy-subrc NE 0.
    CLEAR message.
    message-msgty = 'E'.
    message-msgid = 'ZMI'.
    message-msgno = '001'.
    message-msgv1 = ID.
PERFORM return_message USING message
                               CHANGING return.
Endif.
form return_message USING    VALUE(P_MESSAGE)   LIKE MESSAGE
                               CHANGING P_RETURN LIKE BAPIRETURN.
CHECK NOT MESSAGE IS INITIAL.
CALL FUNCTION 'BALW_BAPIRETURN_GET'
       EXPORTING
            TYPE       = P_MESSAGE-MSGTY
            CL         = P_MESSAGE-MSGID
            NUMBER     = P_MESSAGE-MSGNO
            PAR1       = P_MESSAGE-MSGV1
            PAR2       = P_MESSAGE-MSGV2
            PAR3       = P_MESSAGE-MSGV3
            PAR4       = P_MESSAGE-MSGV4
       IMPORTING
            BAPIRETURN = P_RETURN
       EXCEPTIONS
            OTHERS     = 1.
endform.

Difference between a programe&function module in R/3 & BW

Hi Gurus
i would like to know differenece between programe and function module in R/3
and BW, so can some one give me a brief idea about it cheers thanks .....

Hi,
Function modules are ABAP routines that are administered in a central function library. They apply across applications and are available throughout the system. You must assign function modules to a function pool that is called a function group. A function group is nothing but a container for the function modules. Now create a function group and then a function module.
it is a kind of standrad program where u can use it in differnt local programes .
take an example standrad function module "REUSE_ALV_CHECKBOX_SET" suppose u want to create a checkbox in output screen u dont need to write a program for that u can use above mentioned function module in ur programe.
hope this information helps u
Regards,
Gurudatt Bellary

Find Userexit name based on Exit function module

Hi All,
Is there any way to find the userexit name based on the function module.
My exit function module is EXIT_SAPLATPC_001. I want to find the exit name.
Appreciate your help.
Thanks,
Jaffer Ali.S

Hi
This is the Exit Name: ATP00001 for the Exit FM you have given. I took the package name this exit FM is stored in the Attributes of FM in SE37. In the search criteria of SMOD,after hitting f4..and selecting Information System, I gave the package name...and it gave me the exit name.
P.S: The above method may sometimes lead to giving in more than one exit as result.
Vishwa.

Where can i find the theory for alv with function modules

hi
where can i find the theory for alv with function modules

Hi,
Please check this link
http://sap.niraj.tripod.com/id66.html
ALV function module
http://wiki.ittoolbox.com/index.php/How_do_I_insert_a_logo_in_ALV_using_Function_Modules%3F
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/using-function-module-fm-reuse_alv_grid_display-to-display-a-report-in-alv-1472543
reward if helpful
raam

Extend execution of ABAP programs - function module TH_REDISPATCH

Hello Experts,
Does anyone now where I can find documentation for FM TH_REDISPATCH?
When this FM is called, Does it really forces a commit work?
I have already read note 25528, but I need more information.
Thanks in advance and regards!

TH_REDISPATCH is internally used by SAP to prevent a long running work process (especially online processes) from getting timed out.
TH_REDISPATCH is part of task handler functions. Other functions in the group like TH_WPINFO lists the work processes run on an application server in real time (used by transaction SM51). I often use TH_WPINFO to see what db activity a running job is currently doing (what we see in SM51 against a process). As SM51 access is normally not provided in production TH_WHPINFO comes handy.

Link between output type and associated program/function module..

hi,
where do i see this link when i configure idocs in EDI scenario ?
thks

hi check this link..
http://www.****************/Tutorials/ALE/DataDistributeCustomIDOC/page1.htm
regards,
venkat

Any Program/Function module to Download/Upload Smartform?

Hi All,
    I had forgotten in my previous thread to mention that I dont have option Utilities->Download/Upload Form in t-code SMARTFORMS. so I am looking for alternative method to download or upload the smartform..pls help me out.
Regards
Shaik.

Not that I'm aware of. But here some code for ya.
report zrich_0001.
Parameters: d2 type localfile default '/usr/sap/TST/SYS/Data1.txt'.
data: begin of itab occurs 0,
      rec(20) type c,
      end of itab.
data: wa like line of itab.
start-of-selection.
wa-rec = 'Test'.
append wa to itab.
open dataset d2 for output in text mode.
loop at itab.
    transfer itab to d2.
endloop.
close dataset d2.
Regards,
Rich Heilman

Find Message VL 324 in programs / function modules etc.

Similar Messages

Maybe you are looking for