Find My Friends (Just The Important ones)

Hi,,,
I would like to use "Find My Friends" app as both my wife and i have iPhones.
Ive put the app on both phones ,,,
We have one Apple ID for all our devices,,,
It doesnt seem to work ???
I just want to to use to see our locations ,, not everybody else
Is this possible ???
Regards
Glyn

Thanks,,,
I think i have it working now,,,
Apples confirmation of ID setUp is a little twisted,,,
Email address verified.
Thank you for verifying your address. [email protected] is now associated with your Apple ID.
It isnt "Asscoiated" with my Apple ID at all,,,,
IT "IS" my Apple ID

Similar Messages

  • HT201412 My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work, As long as I have this situation I can do nothing on

    My i Pad 3 shows "cannot Access Find My Friends open the app and review your sign in information to continue sharing your location. And I have two buttons : Later and Open but they don't work. As long as I have this screen situation, I cann't do anything on my I Pad. Please help !!

    I have the same problem on my iPhone4. It is obviously a bug in the software. Once it pops out I am locked out of my phone. I can't even begin to describe the frustration this causes. All that stuff about holding down the buttons is useless. the phone won't even shut off. I can take a screen shot like that or go to voice control. Even when I got to a wifi connection, I can't get on. This app blocks everything else. This is a serious bug and can have serious consequences. The only thing my phone would do is go to voice control and let me play iTunes or phone people. Some smart phone hey?
    I have finally got to a place with a wide enough wifi to connect my computer and restore the phone. This has lasted over a day!
    I don't even know why Find My Friends is on my phone. Is it part of the package and how do I turn it off?

  • I have copied my iTunes library onto a new computer, but when I play back the songs there seems to be random "miss" or "drop out".  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record.  Although when I play the same song over again, the "miss" occurs in a different location during the song.  No probs with old computer, just the new one.  I'm onto my third new computer - same problem.  Any suggestions please?

    You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
    There is an alternative version for 64-bit editions of Windows here:
    iTunes 12.1 for Windows (64-bit — for older video cards)
    that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent.  The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer.  The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
    Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8).  It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
    If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.

  • How do i find my newest itunes tv downloads, in my video app.  In the OS7 all my purchases are there so i can find which onw is the new ones?

    How do i find my newest itunes tv downloads, in my video app.  In the OS7 all my purchases are there so i can find which onw is the new ones that i have not watch

    Well blow me down & keelhaul me! I've solved my own problem. The issue appears to be that Apple won't sync Smart Groups from Address Book to the iPhone. I created a test group with a few dud contacts in Address Book; iTunes sync'ed then OK & as soon as I went into Contacts on iPhone, there suddenly was the Groups button appearing with 2 Groups - my Test Group + all Other contacts. Nice one apple - another undocumented feature! Looks like I have to do away with the Smart Groups feature & convert them all to normal Groups in Address book - bugga!

  • How can I set my phone to delete messages after a certain period of time? 6 months, 1 year??? It is taking up over 4GB on my phone.  I don't want to delete everything just the oldest ones.

    How can I set my phone to delete messages after a certain period of time? 6 months, 1 year??? It is taking up over 4GB on my phone.  I don't want to delete everything just the oldest ones.

    If you update to iOS 8, you can select that in Settings>Messages>Keep Message and then select your option. If you don't update to iOS 8, you'll need to do it manually.

  • "Preview for Files Not Available" & "Failed to Find a Place for the Imported File"??

    When I export RAW images into LR, some say "Preview for Files Not Available".  Also, it says "Failed to Find a Place for the Imported File".  Why?  What can I do to resolve this

    Hi,
    Tried with this but still the same issue..
    Stop the application services, recompile the JSP files manually, and start the application services. Check the login page then.
    Note: 435550.1 - R12 Login issue on target after cloning , fresh install or upgrade
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=435550.1
    Any other area to look into?
    Thanks for your time!
    Regards,

  • Option Click on the Volume menubar icon doesn't display ALL airplay devices, just the last one used

    Option Click on the Volume menubar icon doesn't display ALL airplay devices, just the last one used. I've seen other peoples display all their devices. Why can't I?

    I've discovered that those screenshots where you see more than one speaker listed in the menubar icon are actually bluetooth devices, not airplay. When you check the shot of the system preferences pane and see them all listed there too, the Type says Bluetooth. Not sure why bluetooth gets them all listed and apple's own airplay standard does not. Hope a developer writes a mac app to do it!

  • How would I replace just the (imported) movie portion without having to start over the entire iDVD project from scratch?

    I've just added a new ending and want to burn the new version of my iDVD project.  How would I replace just the (imported FCE) movie portion without having to start over the entire iDVD project from scratch?

    In an attempt to help clarify:
    The FCE 3.5 project I first wrote about had 10 chapters and was a mix of stills and transcoded DSLR video clips that measured 58 min in length. After FCE converted it to a Quicktime movie, it exported from FCE to iDVD 7 flawlessly until I was asked to make a last minute change.
    My older software wasn't endowed with the ability to "detect modifications".  However, Deleting Assets was successful and a revised version of the original video could substituted saving me from starting iDVD over from scratch (thanks to Old Toad).  Luckily, the ugly iDVD BUG did not awaken during these procedures.  Thanks Bengt W.
    I hope this helps the discussion.

  • HT1386 i have been trying to transfer my downloaded songs to my library followed the steps the apple support have given but it never saved my downloaded songs just the purchased ones.

    i have been trying to transfer my downloaded songs to my library. i followed the steps the apple support have given but it never saved my downloaded songs just the purchased ones.

    To copy non-iTunes purchases you need one of the thrd-party programs discussed here:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • I can import newer CDs ... it's just the old ones?

    Since I have upgraded beyond iTunes 4.9, I cannot import older CDs, altho new CDs import fine. iTunes can read the older CDs and display the tracks, and even play the tracks on occasion, but hitting the Import button causes an almost immediate freeze and I have to physically turn the PC off and back on. I don't get error messages, just everything locks up.
    I have read posts indicating problems with importing CDs in general with Versions 5 and above, but my newer CDs are importing with no problem. It's the older CDs that are problematic. The disks are not damaged or scratched.
    Any suggestions are appreciated ... Thanks
    Compaq Presario 2135US   Windows XP  

    Do the add-ons you installed appear in the Add-ons > Extensions Tab = {Ctrl + Shft + A} ??

  • Find my friends - block position from one follower only ??

    In the "Find my Friends" app, I don't understand why it isn't possible to block your position from one (or a few) follower(s)?
    It seems like one of the most important things !!! And the option isn't available !
    Ok, you can block your position from all... but why?
    In this case, why use the app at all ?
    It seems so logical that you could choose... because there are differences between close friends, friends and your family.
    Apple, please ADD this option to the application !!
    Maybe people would find more user friendly, and they would have better control over their privacy!
    Thank you !
    Stephanie

    I just got this problem and cannot see how this can be undone either...
    Best regards,
    Peter

  • My drive recently had to be replaced with a new one installed by Apple they reinstalled all my stuff from my time machine. Most my programs had to be updated which I managed with a little help from my friends, but the last one that I can't solve is

    My IMAC OSX 10.6.8   2.8 GHz intelcore  2Duo 4GB 800 Mhz DDR2 SDRam recently had to have its hard drive replaced by apple thy actually had to give me a larger one because mine was no longer available,They also reinstalled all my programs and data from my 2 terrabite time machine back up. I got my system home and found that I had to upgrade most of my programs which I managed with a little help from my friends, but I still have one problem that I can't solve I have a Nikon Coolpix S6 that I have Been Syncing with my Iphoto since I've got it 3 years ago and now when I place it in the cradle the program reconizes it and says that it is going to start to import the new photos the little white wheel in the center of the screen starts spinning but nothing else happens. I checked all my connections and they are goog plus I even downloaded a nikon progam just to double check the camera & cradle and it works there but it wont pair off with my IPhoto.

    First go to iPhoto Preferences, look in both General and Advanced tabs to make sure that things are set to import from camera into iPhoto.
    Then if that doesn't help, connect the camera and open Image Capture in your Applications > Utilities folder and see if you can use Image Capture to reset the import path from the camera to iPhoto.
    Image Capture: Free import tool on Mac OS X - Macgasm
    Message was edited by: den.thed
    Sorry John, I didn't see your post when I clicked the reply button. Dennis

  • TS1424 Hy. Please help me. what's the problem? when i accessing icloud or find my friend app: The maximum number of free accounts have been activated on this iPhone.

    Hy. please help me. what's the problem? when i accessing icloud or find my friend:The maximum number of free accounts have been activated on this iPhone.

    Then you'll have to use another iOS device or Mac running OS X Lion or higher to create a new account for you to use on your phone.  If you don't have one, perhaps a friend would allow you to create and account on their device (note: this will use one of their three maximum accounts).  To do this, they would need to go to Settings>iCloud, tap Delete Account (which will delete the account from their device but not from iCloud), then allow you to sign back in with your ID to create the new account.  Then tap Delete Account to delete the new account from their device, and finally, sign back in with their iCloud ID to restore their iCloud account to their device.  Then you can sign in with your ID on your phone in Settings>iCloud and use the new account.

  • HT201493 Can I make multiple find my friends accounts off of one apple id to see my children's locations?

    I would like to have my kids' location but we are all on the same apple id. can we make multiple accounts?

    Go here: https://appleid.apple.com and create a separate ID for each device.  Then go to Settings>iCloud and set up a different iCloud account on each device using a different ID.  Then launch the Find My Friends app on each device and log in using this iCloud ID.

  • I synced my iPhone to iTunes and NONE of my music will play, just the purchased ones.. Why?

    So I synced my phone to my laptop, transfered all 192 songs that used to be on it, went to play them and nothing. There is just this stupid red round circle with a square in the middle of it next to my music. The only ones that work are the ones that I purchased. PLEASE HELP?!?!

    http://support.apple.com/kb/HT2519

Maybe you are looking for

  • Fixed Assets - Adding cost to an asset

    Accounting department needs to add value to an existing asset.  The asset has a capitalization date of 03/15/2006 and the amount to be added is 170K.  Because that year is already closed, we have to post the acquisition costs in the current period. 

  • Error in Seeburger Adapter

    Hi Experts,           We are sending a message to a Partner, and i can see the message processed succesfully in the SXMB_MONI and also in the Runtime Workbench, but when i see in the seeburger adapter monitoring for the MDN's i noticed that the messa

  • Can't get desktop background to display

    I don't know if this is HW or SW, but I'll start here. I have a brand-new MBP (early 2011). I can't get it to display a desktop background for love nor money, i.e. going into System Preferences, Desktop/Screen Save, and choosing a background, I get n

  • Mail slowly eats more and more Real Memory until it's super sluggish

    My Mail had been giving me lots of problems. Basically it is fine when I open it and starts to become more and more slow and unresponsive the longer I have it open. I ultimately have to quit, and it always has to be a force quite because it just gets

  • How can I get query filter dates in report heading?

    <p>Hello everybody.</p><p>I'm pretty new at this so I hope this is the place to ask this question.</p><p>I'm trying to create a report in WebI where I want a number of cases sorted by a number of categories and between different dates. The dates are