Find User Exit or BADI

Hi all,
When I worked in the version 4.6 I used to use the object v_ext_act, v_ext_imp and the transaction St05 to find a user exit or a badi when I need it. But since I started to work in the version 6.0 it seems that with these objects I can't find anything.
Any of you know if SAP has changed the name of these objects?
Thanks

Hi Raul,
Another approach that you can use in order to find out user-exit or badi in a program or transaction is to start execution of it in debug mode and then put a break-point in following statements:
CALL CUSTOMER-FUNCTION --> to find user-exits.
CALL BADI --> to find BADI's
Then just press F8 and SAP will stop whenever a user-exit or badi is invoked.
Hope this helps.
Cheers.

Similar Messages

  • How to find User Exits/ Enhancments/ BADI's for T-code CJ20N

    Hi All,
        In T-code CJ20N, assume there are two fields A & B. User will input value in A, based on A value I need to fill B field. So I need to find first suitable User Exit/ Enhancment/ BADI.
    Kindly help me in this regard. Pls tell me how to find User Exit/ Enhancment/ BADI for a given t-code.
    Regards
    Jaker.

    Hi,
    Check the following , this might help,
    1. CNEX0037
    2.CNEX0038
    3.CNEX0039
    Regards
    Kiran Sure

  • How to find the user exits and BADIS from SPRO

    Hi all,
    please let us know how to find the User exits or BADIS for an application from SPRO.
    Regards,
    Madhavi

    Hi Varisetty,
    Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
    For User Exit:
    Put "/h" in the command box (to start debugging)
    Execute your transaction
    When you enter debugging - put a breakpoint at statement
    CALL CUSTOMER-FUNCTION
    the control will stop at all calls to User Exits
    For BAdi (it's simpler)
    Go to class CL_EXITHANDLER in SE24
    Enter method GET_INSTANCE
    Put a breakpoint in this method
    Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
    Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
    Cheers,
    Adi

  • Help to find user exit/BADI in cj20n to save requisitioner as use name

    Hi,
    I have requirement in cj20n. Please help me to find user exit or BADI for cj20n which saves requisitioner as user name automatically.
    Thanks,
    Roshani.

    Hi,
    Check this BADI :                   WORKORDER_CONFIRM.
    Goto SE18 ---> Give the above BADI name. If you want to create go to SE19 and use the above definition to create.

  • Search cluster PCL4 user-exit or BADI, enhancement

    Hi,
    i need to add some code when the system has finished to record the PCL4 cluster (HR), but i don't find user-exit or BADI's.
    Thanks for your help.

    I don't think there is a user exit or BADI for PCL4.
    What do you want to do?
    Usually there are user exits for reports or transactions and not for tables.

  • User exit or BADI for F110 transaction

    Hello, i need a user exit or badi for the F110 transaction with the objective to shoot workflow of approval of payment proposal.

    Hi Mathias,
    Welcome to SDN.
    Please check this link for sample code to find user exits and BADIs for a given transaction code.
    User Exit
    Hope this will help.
    Regards,
    Ferry Lianto

  • User-exit or BADI for transaction MRRL to modify FI

    Hello,
    I need to find user-exit or BADI to modify the exchange rate when we execute MRRL transaction.
    I already try user-exit MRMH0001 (Logistics Invoice Verification: ERS procedure), but it didn't work.
    Thanks for any help.
    regards
    Zbigniew

    Following are the available suer exits provided by SAP. Try if any of these helps -
    Exit Name           Description                                                                               
    LMR1M001            User exits in Logistics Invoice Verification                       
    LMR1M002            Account grouping for GR/IR account maintenance                     
    LMR1M003            Number assignment in Logistics Invoice Verification                
    LMR1M004            Logistics Invoice Verification: item text for follow-on docs       
    MRMH0001            Logistics Invoice Verification: ERS procedure                      
    MRMH0002            Logistics Invoice Verification: EDI inbound                        
    MRMH0003            Logistics Invoice Verification: Revaluation/RAP                    
    MRMN0001            Message output and creation: Logistics Invoice Verification

  • User exit or Badi For MBRL

    Hi all,
    I am using a y program which call MBRL t-code in back ground . I need  to restrict the t-code MBRL to all user and allow only to use Y program. I can not remove the authorization for MBRL. I found user exit for MBRL but it is in saving time.
    Can any help me to finding user exit or badi available before call MBRL initial screen.
    Thanks

    Hi,
    Try by creating screen / transaction variant for MBRL transaction using SHD0 tcode and make all the Input fields and buttons in display mode. Then activate the screen variant for all the user who should only use your Y transaction and not MBRL transaction.
    ELSE.
    Try creating an Implicit Enhancement in FORM routine transaktions_init inside include program MM07MFT0_TRANSAKTIONS_INIT and restrict your validation code with transaction code MBRL.
    Thanks & Regards,
    Harish
    Edited by: harishkumar.d on Apr 27, 2011 9:33 AM

  • How to find the list of USER-EXITS or BADI for the transaction ABSO

    Hi all,
    Please help me to find the list of USER-EXITS or BADI for the transaction ABSO & find the exact user-exit which meets the requirement.
    Thanks & Regards,
    gyanaraj

    Hi,
    Copy the problem  in SE38 and  Execute it
    Enter the Tcode  u want
    this  will the  list of Userexits and badis
    TABLES: TSTC,
    TADIR,
    MODSAPT,
    MODACT,
    TRDIR,
    TFDIR,
    ENLFDIR,
    SXS_ATTRT ,
    TSTCT.
    DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA: FIELD1(30).
    DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS: P_TCODE LIKE TSTC-TCODE,
    P_PGMNA LIKE TSTC-PGMNA .
    DATA: WA_TADIR TYPE TADIR.
    START-OF-SELECTION.
    IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
    ENDIF.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR
    WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR
    WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR
    WHERE FUNCNAME = TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT in ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(105) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    Sorting the internal Table
    sort jtab by OBJECT.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type C.
    clear : wf_smod, wf_badi , wf_object2.
    Get the total SMOD.
    LOOP AT JTAB into wa_tadir.
    at first.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Enhancement/ Business Add-in',
    41 SY-VLINE ,
    42 'Description',
    105 SY-VLINE.
    WRITE:/(105) SY-ULINE.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    FORMAT COLOR COL_GROUP INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 wf_object2,
    105 SY-VLINE.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    SELECT SINGLE MODTEXT into wf_txt
    FROM MODSAPT
    WHERE SPRSL = SY-LANGU
    AND NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    when 'SXSD'.
    For BADis
    wf_badi = wf_badi + 1 .
    select single TEXT into wf_txt
    from SXS_ATTRT
    where sprsl = sy-langu
    and EXIT_NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED ON.
    endcase.
    WRITE:/1 SY-VLINE,
    2 wa_tadir-OBJ_NAME hotspot on,
    41 SY-VLINE ,
    42 wf_txt,
    105 SY-VLINE.
    AT END OF object.
    write : /(105) sy-ULINE.
    ENDAT.
    ENDLOOP.
    WRITE:/(105) SY-ULINE.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No.of Exits:' , wf_smod.
    WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
    ENDIF.
    AT LINE-SELECTION.
    data : wf_object type tadir-object.
    clear wf_object.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(8) EQ 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    when 'SXSD'.
    SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
    CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
    ENDCASE.

  • User exit or BADI for ME22N

    Hi,
    I need a user exit or Badi for defaulting Plant at line item level.
    The scenario goes like this: when ever user tries to change an existing Purchase order and tries to add a new line item in it, I need to trigger USEREXIT or BADI , so that it reads the previous line Plant and updates the current line with the same plant.
    I tried with user exit MM06E005 but it didnt seem to work.
    Can any one please help me?
    I am new to BADI, so I am not sure how to find the BADI and use it. It would be great if anyone can help me i this.
    Thanks
    Ramya

    Hello
    The BAdI ME_PROCESS_PO_CUST is the right one. The method PROCESS_ITEM should be triggered whenever the user changes something in the purchase order at item level and executes any kind of function (e.g. ENTER, CHECK or SAVE).
    However, instead of overwriting the user input via the BAdI you should implement method CHECK ( Closing Check ) where you can validate the user input. If any of your validation fails you can send an error message and set CHANGING parameter CH_FAILED = 'X'. This approach is much more transparent for the user.
    NOTE: In order to "send" an error message you need to add the include mm_messages_mac to your implementing class. For an example see class CL_EXM_IM_ME_PROCESS_PO_CUST (should be available on ERP 6.0):
    METHOD if_ex_me_process_po_cust~process_item .
      DATA: ls_mepoitem TYPE mepoitem,
            ls_customer TYPE mepo_badi_exampl,
            ls_tbsg     TYPE tbsg.
      INCLUDE mm_messages_mac. "useful macros for message handling
    * here we check customers data
      ls_mepoitem = im_item->get_data( ).
      IF ls_mepoitem-loekz EQ 'D'.
    * check field badi_afnam
        IF ls_customer-badi_afnam IS INITIAL.
          mmpur_metafield mmmfd_cust_02.
          mmpur_message_forced 'W' 'ME' '083' text-003 '' '' ''.
        ENDIF.
      ENDIF.
    ENDMETHOD.                    "IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM
    Regards
      Uwe

  • User Exit OR Badi for MK01 transaction (used for saving vendor amster data)

    Hi All,
    I have a requirement where I have to call my workflow, when we create the Vendor using my custom transaction (ZMK01, which is a copy of standard transaction MK01).
    For Workflow triggering I am using FM 'SAP_WAPI_CREATE_EVENT' in the user exit  'EXIT_SAPMF02K_001' but this is only for checking the data on saving Vendor Master.
    So I want to use FM 'SAP_WAPI_CREATE_EVENT' at right place. For that , I need User-Exit or BADI which is used for saving vendor master data.
    Could anyone please help me to find out the user exit or BADI for save event of vendor master data using transaction MK01.
    Looking forward to your advise and thanks in advance.
    Best Regards,
    Mamta

    Hi ,
    I forgot to activiate the project linked with User exit 'EXIT_SAPMF02K_001' .
    so problem is solved now
    Thanks,
    Mamta

  • User exit or BAdi for field update in ECC system for SUS supplier

    Dear Guru's,
    I am configuring MM-SUS scenario in our srm 7.01 scenario. Not all vendors of our client are going to be SUS vendors. For SUS vendors, the client will be using Purchase Order Acknowledgement and Advanced Shipping Notification key. I am thinking of configuring a confirmation control key which will incoporate requirement of PO acknowledgement and Inbound delivery document. The assignment of confirmation control key and PO Acknowledgement Required checkbox in the vendor master record will default it in the purchase order.
    Now, the question is how to update the existing vendor master data record which will be SUS vendor. I am looking at a solution like user exit or BAdi which updates the confirmation control key and purchase order acknowledgement required check box when the client manually assigns the class 'Z_CRED_SUSMM' to the  ERMS vendor master.
    Could you please help me to find the required exit or BAdi?
    Thanks and regards,
    Ranjan
    Ranjan Sutradhar

    EXIT_SAPMF02K_001 definitely wont work as this is for custom checks. this does not update data in vendor master.
    you can try using below method of VENDOR_ADD_DATA badi.
    IF_EX_VENDOR_ADD_DATA~PRESET_VALUES_PORG
    but you need to read the screen field for classification and then according to that i think you can change the LFM1 data inside this badi

  • User exit or BADI for purchase order

    Hi,
    I want send outbound IDOC for purchase order to 3rd party integration system.
    It is too hard to map between standard purchase order IDOC and business object of 3rd party system because the structure of standard purchase order IDOC is so complicated.
    So I want bring purchase order data into CBO table when purchase order is created or released. And this data will be inserted CBO IDOC for more simple structure than standard one.
    I'm trying to find some of user exit or BADI to insert from standard purchase order to CBO table in the time of purchase order is created or released.
    And I'm trying to find another way using message type.
    As far as I know it is possible to set sending IDOC in the purchase order message type setting in IMG.
    Is anyone who has related situation or know the way to do this?

    Hi,
    I have similar requirement, however the BADI name you mentioned does not exist.
    Pls let me know the right one.
    Thanks,
    Dipak

  • User Exit or BADI to update the service order  in R/3

    Hi,
    When creating a service order the following fields need to be populated automatically using an user exit or badi.
    1. Planner Group
    2. PMActType – Plant maintenance activity type
    3. Cost/Profit Centre
    4. WBS element
    5. Work center
    so my requirement is there any function module or Badi or user exit to update the service order details when service order is created / changed.
    Pls do the needful.
    Reg
    Ramana

    Hi Ramana,
    Go to SPRO Transaction and follow the below path
    Customer relationship management>Transactions>Settings for Service Processes>Business Add-Ins and you will find 8 BADI's.
    Check these BADI's useful for you.
    Regards,
    Lijo Joseph

  • User exit or BADI for technical closure of a maintenance order

    Hello,
    Please I need the help of you.
    Is there any User exit or BADI for technical closure of a maintenance order
    regards

    Hello ROB,
    Please do not post duplicate thread.
    You can check below two BADI's.  ATP_PUBLISH_RESULTS and  IWO1_SCREEN_MODIFY. Because I have got two BADI's through finder.
    You can also check WO10004, WO10005, WO10006, WO10007, WO10008, WO10009, WO10010 and WO10011 user exits.
    Thanks & Regards,
    Abhijit

Maybe you are looking for