Finder will not copy more than one file at a time to another folder
The Finder can’t complete the operation because some data in “EMAP_14_map.pdf” can’t be read or written.
(Error code -36)
The startup drive is failing, or there is some other internal hardware fault.
Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.
Similar Messages
-
my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large
So now that you have repeated the same thing three times that doesn't make things any clearer at all.
You are copying files from where to where?
How are you attempting to copy files, software or click and drag?
Any other detail would be helpful.
Allan -
K5400 will not print more than one page at a time.
The K5400 Office Jet Pro will not print more than one at a time when I change the number of pages to print in Printing Preferences. I have downloaded all the updates available and have tried many times.
Using a Windows XP SP3 computer.
Thank you, MarionHi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us. -
How do I rename more than one file at a time within a folder?
I am new to OSX. I am looking to rename a batch of .jpg files but I can't figure out how to rename all files within a folder?
I looked for help and apple help only describes how to rename a single file? please see the attrached link for more infomation
http://support.apple.com/kb/PH10646
Thankyou for your support people!
Apple NubeeUse the Automator Action "Rename Finder Items"
(Automator is in the Applications Folder)
You have these options in rename:
Click "Show this action when the workflow runs", then save the workflow as an App -
My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.
My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time. This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail! Any help?
The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Hp 1050 will not print more than one copy at a time
hp 1050 will not print more than one copy at a time
Hi,
The HP Deskjet 1050 All In One can perform multiple copies at a time. To perform a multiple copy, press the Copy Black or Copy Color button as many times as the copy is required. A maximum of 10 copies can be performed at a time.
Please open the link below which illustrates the same.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02459739&tmp_task=prodinfoCategory&lc=en&dlc=en...
If the issue persists then, please perform the steps as shown below and check the copying function again.
Steps to perform a reset.
Press the Power button ( ) to turn off the product.
NOTE: The product might not turn off after pressing the Power button. Continue to the next step regardless.
Disconnect the power cord from the rear of the product.
Disconnect the power cord from the electrical outlet.
Wait 30 seconds.
Reconnect the power cord to the electrical outlet.
Reconnect the power cord to the rear of the product.
Press the Power button ( ) to turn on the product.
Connect the unit directly to a wall outlet.
Check the copying function now.
I hope this resolves the issue, if the error persists then please get back to us. -
Can not color label more than one file at a time
Hi,
I've had this problem since 10.6.6-ish, i can not color label more than one file at a time in the Finder.
Wether i select two, twenty or twohundred only one file gets color labeled.
It doesn't seem to matter if i assign a color label through the File menu or right click > label.
Figured a re-install might fix this but it hasn't (even a clean install without restoring any kind of backup).
Does anyone else have this issue and/or a fix for it?
Thanks,
JayAaaaanyone ?
-
Copy more than one clip at a time from iPhoto to iMovie?? Please help!
Is it possible to copy more than one clip at a time from iPhoto to iMovie? I can't find a way to select/copy more than one.
OK you can leave them in iPhoto and access them from the iMovie Event for iPhoto.
If you prefer to move them to a regular iMovie Event, you can do the following.
1) right-click on one of the iPhoto clips and select "Reveal in Finder". This will open a finder window showing the clips in the iPhoto Library.
2) In a different Finder window, create a folder to hold your event in iMovie. If you are using an internal drive, create a folder using your desired Event Name under the Movies/iMovie Events Folder.
Note: If you are using an external drive, create a Folder called iMovie Events at the top level of the external drive. Then create the (Event Name) folder under this. The external drive must be formatted as MacOS Extended (journaled) for this to work.
3) Select all the clips in the iPhoto finder window that are part of this event and Move them to the Movies/iMovie Event/(Event Name) folder.
4) After you have done this for all the Events, open iMovie and let it generate thumbnails. This may take a while. -
Just bought Photoshop Elements 13. I have a Macbook Pro that meets all the requirements. I have installed and reinstalled the program but it just keeps crashing. The program will load, when I choose the expert tab and try to open more than one file at a time to layer images it just crashes and says "Photoshop Elements has closed unexpectedly" Can anyone help me please?
mikeobe wrote:
OK, kinda slooow here, I hope I'm not trying your patience!? If I understand you correctly, install dummy drivers and then the drivers that came with my printer, Designating NO default printer! Then when I need to use the printer I will have to declare which one each and every time?
Or, just intall by new printer but do not Delcare it as the Default printer, I guess in this instance there would be NO default printer?
You may not even have the problem!
Have you installed the new printer yet?
There are many more people who don't see it happen than those who do.
PS: there is always a default printer. -
Import more than one file at a time
Is there a way to import more than one file at-a-time to LR?
PC or Mac?
You can import whole folder/directory strctures if you want. In LR click on Import in Library or Shift-Cmd/Ctl-I and the initial Finder/Explorer dialogu should let you choose a Folder/Derectory, not just an individual file, though you should be able to Shift Click multiple folders/files as well.
Don
Don Ricklin, MacBook 1.83Ghz Duo 2 Core running 10.4.9 & Win XP, Pentax *ist D
http://donricklin.blogspot.com/ -
Deleting more than one file at a time from Nomad Jukebox Zen Xtra 4
Is there a way to delete more than one file at a time from Zen Xtra? Actually, I'd like to delete most of the 800+ files and the only way I've found is to do them one at a time..! Help!
Either use finder to drag and drop those tracks onto
"Library" in iTunes' left "Source" column or from
iTunes Menu Files use "Add to Library ..." then
navigate to a folder that keep a yoru tracks and
select that folder.
This did it! I was doing an "import" which would only let me do one song at a time. But the "add to library" and the drag and drop both worked. Thanks!!!
New Mac user
Scott in Alaska
MacBookPro Mac OS X (10.4.5) -
Is it possible to color tag more than one file at a time?
I have a Mac Book Air and I have just upgraded to OS X Yosemite. I love the option to tag files by color. However it is taking me FOREVER. I was wondering if there was a way to tag more than one file at a time.
Welcome to Apple Support Communities
Hold the Command key and choose all the files you want to tag with the same color. Then, right-click one of those files and select the color tag, so all the files will be tagged with the tag you wanted. -
Any way to transcode more than one file at a time?
I've noticed that Final Cut Pro X, when doing transcoding (for Optimizing or creative Proxy media) only processes a single file at a time (whereas it can handle processing up to 5 audio files at once), and is only using about 70% of my processor(s) -- I have a dual core, Core i5 processor, 8GB of RAM, about 500MB used by FCPX during the processing. So this thing should have PLENTY of processor and memory headroom to use, and it should certainly be able to transcode more than one file at a time. Yet it isn't nearly taking full advantage of the processors, or the RAM. Is there any solution to this problem?
--Andy H.Try the 'add folder to library' option under file on the main menu.
-
Html tag to upload more than one file at a time
hai sir this is surendra i need html tag to upload more than one file at a time .I am using
<input type="file" name="">
tag to upload single file at a time i need tag to upload more than one file at a time .
Waiting for your resultYou can add more than one input element of type file.
<input type="file" name="name1">
<input type="file" name="name2"> -
Wiki 2: Attaching more than one file at a time?!?!
Is it possible to attach more than one file at a time to a Wiki page?
Currently I can only attach one at a time, its quite tedious - Are there any tricks to speed up the page build?
DFMatthias,
I appreciate the quick response and that would definitely work. I should have been more clear in my original post. I would like the ability for my end-users to browse individual files for viewing and downloading, as well as uploading. I don't think a zipped file would suit my needs..
Thanks for the advice though...
DF
Maybe you are looking for
-
ASA 5505 as hw vpn client to PIX501 or ASA5505 w network extension mode
Hi! We have been using a PIX 501 for a couple of years now to access a local network with Cisco VPN software client. However we now need access from another site with multiple users so I decided to buy two ASA 5505 UL bundle to do the job. First i tr
-
I had to restore my computer and had to reinstall itunes. Now when I try to open itunes I get a message saying it is a new version than my itunes library. How do I fix this?
-
Program with a name starting with '!'
Hi, I have a problem with a progam. In fact, I want to delete an include but this include is used in a program with a name starting with '!' like !ZMM_PR_TEST. I can't open this program or delete it. What can I do ? Must I delete this "strange" progr
-
New OSX version release date - worth postponing purchase?
I was wondering if there is any information on the date of release of new version (10.5) of OSX? Thought it could be worth postponing purchase of new imac g5, if the date is 1-2 months away. Thank you in advance.
-
Project Systems - Outstanding Balances in Previous Financial Year
Hi gurus I recently joined a company that implemented SAP PS and IM It became apparent that year end processing was never completed. Amongst others, project balances was never settled (AUC as well as settlement to CO cost centres) How do I handle thi