Finding out what IP is connected to my network

I set up a wireless device network from my mac and connected another wireless device to it.
Is there a way, through my OSX that I can find out what IP the device is using on my mac's custom network?

In terminal you can try:
ifconfig en0 inet
or:
curl -s "http://www.whatismyip.com/automation/n09230945.asp"

Similar Messages

How do I find out what app is connecting to the internet

Something on my iPhone 4 (fully updated) is constantly trying to connect to the internet via 3G, costing me a lot of money when I am not connected via WLAN! I can't work out what it is, but presume it is an app. How can I find out what is doing it?
I have tried deleting the cache, resetting the phone, etc. Nothing has worked. I even turned off 3G, cellular data, etc. and it STILL connected. How does that work?!
Can anyone help?
thank you!
kind regards, Gordon

thanks for the reply but are you sure about this? What difference would it make? Why 5 apps?
Even if it does work, which I doubt, at some point, I will have to resync ALL my apps again and surely the same thing will happen again, and I will be none the wiser. I still won't know which app it is. There must be a way of finding this out.
Any ideas?
What is really freaking me out is how it is connecting to my carrier (who is charging me) with Cellular data switched off.......?
Thanks again.

New Mac botnet malware uses Reddit to find out what servers to connect to?

Hi all,
I have come across these warnings over the last few days regarding a Mac botnet malware? The Independent published it
17,000 Macs recruited into malware botnet, with a little help from Reddit
Researchers at Russian anti-virus company Dr Web believe that they have uncovered a new botnet, which has recruited thousands of Mac computers. According to their report, the sophisticated malware – which they have dubbed Mac.BackDoor.iWorm – has infected more than 17,000 computers running OS X. Unfortunately, what isn’t presently documented is how the malware spreads – but the consequences can clearly be serious.Like any computers that have been recruited into a botnet, Macs that have been hijacked in this attack could have information stolen from them, further malware planted upon them, or be used to spread more malware or launch spam campaigns and denial-of-service attacks.Fascinatingly, compromised computers receive commands from servers under the control of botmasters, using information posted in messages on Reddit as a navigational aid:Then Mac.BackDoor.iWorm opens a port on an infected computer and awaits an incoming connection. It sends a request to a remote site to acquire a list of control servers, and then connects to the remote servers and waits for instructions.It is worth mentioning that in order to acquire a control server address list, the bot uses the search service at reddit.com, and — as a search query — specifies hexadecimal values of the first 8 bytes of the MD5 hash of the current date. The reddit.com search returns a web page containing a list of botnet C&C servers and ports published by criminals in comments to the post minecraftserverlists under the account vtnhiaovyd.
this is what one forum member on Reddit said.
'Basically, the worm installs itself to look like an application to the operating system and hooks into the automatic startup so that it will launch each time the computer is started.
Once it's running, it does an inventory of what applications you have installed.
It then goes out to reddit to find out where the current botnet command and control servers are located. It then connects to the command and control server to ask for instructions.
The likely reason it looks at the applications that are installed is so that it can use those applications to carry out the botnet's commands (e.g., use Mail to send spam as you.)'
another said
'it is a Trojan packed in a minecraft expansion or custom server or client. Exploiting the same flaw as the flashback worm from 2012."
'another saidUnfortunately, the security analysts fail to mention (or simply don’t know) how the virus is spreading into users’ Macs. Hopefully, this information comes to light soon so Mac users can know what to look out for. Once identified, Apple can add the virus to its security blacklists (which are refreshed nightly) to give some automatic protection to its user base.'
Anyone know about this and is there a way to detect it and then if it is present get rid?
http://9to5mac.com/2014/10/02/new-mac-botnet-malware-uses-reddit-to-find-out-wha t-servers-to-connect-to/
http://www.independent.co.uk/life-style/gadgets-and-tech/hackers-are-using-reddi t-to-control-17000-apple-computers-9773032.html
http://grahamcluley.com/2014/10/mac-malware-botnet-reddit/

seems it has been solved... found this on Mac Rumours
'In an effort to address the threat, Apple has now updated its "Xprotect" anti-malware system to recognize two different variants of the iWorm malware and prevent them from being installed on users' machines. '
'It has been discovered how the botnet is installed. You have to download a pirated app, such as Photoshop, and then give the pirated installer administrator privileges.
No amount of malware security can fix stupid.'
EDIT: Link to evidence: http://www.thesafemac.com/iworm-method-of-infection-found/ (http://www.thesafemac.com/iworm-method-of-infection-found/)'

How can I find out what email is connected to my apple ID account

Trying to download an app onto my iphone but can't remember my password. tried to retrieve my password but nothing has been sent to my email. tried several times. is there anyway to see what email is connected to my apple ID account?
I've tried all of them but my wife set up my phone and I'm lost. (it's not going to her email address either)
help? I can't do anything with my phone without my apple ID password!
(PS. Posting this from my son's account. As I cannot create one without my apple ID password. lol)

None of my email addresses. Which makes me think it was entered incorrectly originally.
When I tried to answer the security questions it asks my birthdate and then asks "answer your secret question"
I have no idea what that question is. Lol. Like I said, my wide set this up with me and neither of us can remember what question was asked. It was a year ago.
If I knew what email they sent my password to I could figure tho out and re set the password.

How do I find out what application is connected to my Nano (2nd Gen.)

When I try to eject it it says "The iPod cannot be ejected because it contains files that are in use by another application."
Does this happen to anybody else, and how do I find the other application so I can eject me iPod Nano (2nd Generation)?

Are you playing a song in iTunes that listed in contents of iPod while it is connected. Try going to your music lib and play a song and disconnect your iPod.
Also, make sure you are not located in some sub dir that utililizes iTunes.
You can also hit 'ctrl,alt,delete' to see what applications are running on your PC.

How can I find out what symbols are connected to any key+option combination?

More speciffcaly, is there a way to get the greek letter alpha? I do a lot of work in higher education and this symbol keeps eluding me.

In many apps, Edit > Special Characters will bring up the Character Viewer. Click on the gear wheel at the top left and choose Customize to add categories if you do not see what you want at first. Drag/drop or double-click to input.
I don't think you can input α from the keyboard unless you activate a Greek keyboard layout, which is probably not worth the trouble.

How do i find out what cabinet im connected to?

Is there a website where I can enter my postcode or house no. and post code? And get a google maps view?

You can e-mail [email protected], they will sometimes provide your cabinet number for you. They did for me though they haven't for some people, the mods will also be able to get the information for you.
If this helped you please click the Star beside my name.
If this answered your question please click "Mark as Accepted Solution" below.

How Do I find out what app is auto-mounting a network share and stop it?

I have a new laptop, the 13" rMBP. I installed Steam and wanted to use the network share on my server to store the game files. Everything went OK. I closed Steam, disconnected the share and shutdown my laptop. When I opened my laptop later on at work, it started to try and mount the network share.It keeps on going it. I removed the Steam app and all files related to Steam that I could find. I've looked at fstab, auto_home, auto_master and a large list of other files and directories and I *still* cannot find the offending file that's auto-mounting the share. It's really frustrating.
The share auto-mounts when I am home but not on the desktop or in finder. I find it by looking at /Volumes/ in terminal. If I mount the share manually under /Volumes/ it shows as Games-1 and mounts on the desktop under Games.
Does anyone have any ideas on where I should be looking to find the offending process/file/daemon?
Thank you!
Trevor

thanks for the reply but are you sure about this? What difference would it make? Why 5 apps?
Even if it does work, which I doubt, at some point, I will have to resync ALL my apps again and surely the same thing will happen again, and I will be none the wiser. I still won't know which app it is. There must be a way of finding this out.
Any ideas?
What is really freaking me out is how it is connecting to my carrier (who is charging me) with Cellular data switched off.......?
Thanks again.

My ipod was stolen, can I find out what the serial number of it is, based on looking at a connection history in my itunes? How would I do this? I didn't register it.

My ipod was stolen, can I find out what the serial number of it is, based on looking at a connection history in my itunes? How would I do this? I didn't register it. I think I found the guy selling it, just looking to confirm the serial number and I'll make a phone call to the police.
Thanks

kevilay2013 wrote:
is this possible?
Yes.
Open iTunes on the computer you used to sync the iPod and select Preferences… from the iTunes menu.
Select the Devices pane. Position the cursor over any of its backups. The iPod's serial number will appear in a popup window.

How do I find out what is using a connection pool

This morning weblogic 8.1.5 complained it couldn't expand a connection pool because it had reached is max concurrent connects limit.
The issue I have is that I don't actually know what is using the connection pool. It should be defunct and redundent but obviously not.
This caused all the threads to be consumed and the managed server hung.
Does anyone know wether it's possible to interigate the pool to find out what it's doing ? I can't check the db as it's managed by another company and I have a v limited read only account.... I can't even select from v&session.
Cheers in advance for any help.

Dave Snaith wrote:
This morning weblogic 8.1.5 complained it couldn't expand a connection pool because it had reached is max concurrent connects limit.
The issue I have is that I don't actually know what is using the connection pool. It should be defunct and redundent but obviously not.
This caused all the threads to be consumed and the managed server hung.
Does anyone know wether it's possible to interigate the pool to find out what it's doing ? I can't check the db as it's managed by another company and I have a v limited read only account.... I can't even select from v&session.
Cheers in advance for any help.If the pool is not supposed to be used, disable it via the console,
and whatever applications are still trying to use it will get
quick exceptions.
Joe

I need to find out what my key code is to connect another pc to my airport, I am running snow leopard. I need the hexidecimal code, 12 characters. How can I find it?

anybody have a suggestion? I need to find out what my key code is to connect another pc to my airport, I am running snow leopard. I need the hexidecimal code, 12 characters. How can I find it?

You can get the Equivalent Network Password from the menu options of the AirPort Utility as follows:
Start the AirPort Utility; select the AirPort, and then, select Manual Setup.
From the Utility's menu bar, select Base Station, and then, Equivalent Network Password to reveal the hexidecimal key code.

Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

Is it possible and how to find out what host, if any, is connected to a remote PXI prior to switching execution target programmatically or in devlopment environment?

This functionality is not available in LabVIEW RT. If you attempt to switch execution target to an RT controller already targetted by someone else, it will tell you too many hosts are connected and fail. Of course if it allows you to switch, then no one was connected. By attempting to switch execution target you can use the message above to determine if anyone is targetted or not, but if someone is, there is no way to determine who.
If you are concerned about this sort of thing, you might check the RT target options in LabVIEW RT to change the IP access list for hosts that are allowed to switch execution target to it.

HT1689 How can I find out what 5 devices are connected to my itunes account

How can I find out what 5 devices are connected to my iTunes account?

There is no list available from your end.
(78933)

How do you find out what information is in the 'other' section of itunes when iphone is connected

How do you find out what information is in the 'other' section on the bottom of itunes

You don't
If it is much more than a gb or so, then it indicates corrupt files. A restore should resolve.

How to find out what was imported from a dump file

Hi.
I got the dump file from a group and they told me to import it. Import job went successfully without errors as following:
Import: Release 9.2.0.6.0 - Production on Mon Oct 16 20:53:12 2006
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle9i Enterprise Edition Release 9.2.0.6.0 - 64bit Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
Export file created by EXPORT:V09.02.00 via conventional path
Warning: the objects were exported by OPS$ORACLETS, not by you
import done in US7ASCII character set and UTF8 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export server uses AL16UTF16 NCHAR character set (possible ncharset conversion)
. importing OPS$ORACLETS's objects into SYS
. importing BDS_APP's objects into BDS_APP
Import terminated successfully without warnings.
How do i find out what was imported from a dump file?

another way would be to just list the contents of the dump file
imp user/pass file=dumpfile show=Y

Finding out what IP is connected to my network

Similar Messages

Maybe you are looking for