Finding the same value in different columns
Hello,
I am trying to figure out how I would go about finding the same value in the same row but in different columns. For example, in the table sometimes the report name is the same as the description. I would like to find all of the rows where this is the case.
Thanks
Report name
Description
Date
Time
Report 1
Report 1
dddd
tttt
Report 2
Billing Report
dddd
tttt
Report 3
Report 3
dddd
tttt
Hi,
Is this what you want?
SELECT * -- or whatever columns you want
FROM table_x
WHERE report_name = description
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002
Similar Messages
-
Using a custom itemrenderer in datagrid to update value in the same row but different column/cell
Here's what I have so far. I have one datagrid (dg1) with enable drag and another datagrid (dg2) with dropenabled. Column3 (col3) of dg2 also has a custom intemrenderer that's just a hslider.
When an item from dg1 is dropped on dg2, a custom popup appears that asks you to use the slider in the popup to set a stress level. Click ok and dg2 is populated with dg1's item as well as the value you selected from the popup window. I was also setting a sliderTemp variable that was bound to the itemrender slider to set it but that's obviously causing issues as well where all the itemrenderer sliders will change to the latest value and I don't want that.
What is needed from this setup is when you click ok from the popup window, the value you choose from the slider goes into dg2 (that's working) AND the intemrenderer slider needs to be set to that value as well. Then, if you used the intemrenderer slider you can change the numeric value in the adjacent column (col2). I just dont know how to hook up the itemrenderer slider to correspond with that numeric value (thatds be in col2 on that row);
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" minWidth="955" minHeight="600"
xmlns:viewStackEffects="org.efflex.mx.viewStackEffects.*" backgroundColor="#FFFFFF" creationComplete="init(event)"
xmlns:components="components.*" xmlns:local="*">
<mx:Script>
<![CDATA[
import mx.binding.utils.ChangeWatcher;
import mx.collections.ArrayCollection;
import mx.controls.Alert;
import mx.controls.TextInput;
import mx.core.DragSource;
import mx.core.IUIComponent;
import mx.events.CloseEvent;
import mx.events.DataGridEvent;
import mx.events.DragEvent;
import mx.events.FlexEvent;
import mx.events.ListEvent;
import mx.events.SliderEvent;
import mx.events.SliderEventClickTarget;
import mx.managers.DragManager;
import mx.managers.PopUpManager;
import mx.utils.ObjectUtil;
[Bindable]private var myDP1:ArrayCollection;
[Bindable]private var myDP2:ArrayCollection;
[Bindable]public var temp:String;
[Bindable]public var slideTemp:Number;
private var win:Dialog;
protected function init(event:FlexEvent):void{
myDP1 = new ArrayCollection([{col1:'Separation from friends and family due to deployment'},{col1:'Combat'},{col1:'Divorce'},{col1:'Marriage'},
{col1:'Loss of job'},{col1:'Death of a comrade'},{col1:'Retirement'},{col1:'Pregnancey'},
{col1:'Becoming a parent'},{col1:'Injury from an attack'},{col1:'Death of a loved one'},{col1:'Marital separation'},
{col1:'Unwanted sexual experience'},{col1:'Other personal injury or illness'}])
myDP2 = new ArrayCollection()
protected function button1_clickHandler(event:MouseEvent):void
event.preventDefault();
if(txt.text != "")
Alert.yesLabel = "ok";
Alert.show("", "Enter Stress Level", 3, this,txtClickHandler);
private function image_dragEnter(evt:DragEvent):void {
var obj:IUIComponent = IUIComponent(evt.currentTarget);
DragManager.acceptDragDrop(obj);
private function image_dragDrop(evt:DragEvent):void {
var item:Object = dg2.selectedItem;
var idx:int = myDP2.getItemIndex(item);
myDP2.removeItemAt(idx);
protected function dg1_changeHandler(event:ListEvent):void
temp=event.itemRenderer.data.col1;
protected function dg2_dragDropHandler(event:DragEvent):void
event.preventDefault();
dg2.hideDropFeedback(event as DragEvent)
var win:Dialog = PopUpManager.createPopUp(this, Dialog, true) as Dialog;
win.btn.addEventListener(MouseEvent.CLICK, addIt);
PopUpManager.centerPopUp(win);
win.mySlide.addEventListener(Event.CHANGE, slideIt);
private function txtClickHandler(event:CloseEvent):void {
trace("alert");
if (event.detail==Alert.YES){
myDP2.addItem({label:temp});
private function addIt(event:MouseEvent):void{
myDP2.addItem({col1:temp, col2:slideTemp})
private function slideIt(event:SliderEvent):void{
slideTemp = event.target.value;
]]>
</mx:Script>
<mx:Panel x="10" y="10" width="906" height="481" layout="absolute">
<mx:Image x="812" y="367" source="assets/woofie.png" width="64" height="64" dragDrop="image_dragDrop(event);" dragEnter="image_dragEnter(event);"/>
<mx:DataGrid x="14" y="81" width="307" height="251" dragEnabled="true" id="dg1" dataProvider="{myDP1}" wordWrap="true" variableRowHeight="true" change="dg1_changeHandler(event)">
<mx:columns>
<mx:DataGridColumn headerText="Examples of Life Events" dataField="col1"/>
</mx:columns>
</mx:DataGrid>
<mx:DataGrid x="329" y="81" height="351" width="475" dragEnabled="true" dropEnabled="true" id="dg2"
wordWrap="true" variableRowHeight="true" dataProvider="{myDP2}" editable="true"
dragDrop="dg2_dragDropHandler(event)" rowHeight="50" verticalGridLines="false" horizontalGridLines="true" >
<mx:columns>
<mx:DataGridColumn headerText="Stressor" dataField="col1" width="300" wordWrap="true" editable="false">
</mx:DataGridColumn>
<mx:DataGridColumn headerText="Stress Level" dataField="col2" width="82" editable="false"/>
<mx:DataGridColumn headerText="Indicator" dataField="col3" width="175" paddingLeft="0" paddingRight="0" wordWrap="true" editable="false">
<mx:itemRenderer>
<mx:Component>
<components:Compslide/>
</mx:Component>
</mx:itemRenderer>
</mx:DataGridColumn>
</mx:columns>
</mx:DataGrid>
<mx:Text x="14" y="10" text="The first category of underlying stressors is called Life Events. The list includes both positive and negative changes that individuals experience. Both can be stressful. For example, becoming a parent is usually viewed as a positive thing, but it also involves many new responsibilities that can cause stress. " width="581" height="73" fontSize="12"/>
<mx:TextInput x="10" y="380" width="311" id="txt"/>
<mx:Text x="10" y="335" text="Add events to your list that are not represented in the example list. Type and click "Add to List"
" width="311" height="51" fontSize="12"/>
<mx:Button x="234" y="410" label="Add to List" click="button1_clickHandler(event)"/>
</mx:Panel>
</mx:Application>how do i go about doing that? do i put a change event function in the itemrenderer? and how would i eventually reference data.col2?
-
How to figure out if the bottom 2 lines in each group has the same value in specific columns?
Hi, I need help to finish my project ASAP. My task is to figure out defects in this Loan_Status_Tbl.
When Current_Principal= 0, Loan_status should be populated from previous records. For example, when Loan_Nbr 00001's current_Principal=0, it's loan_status is not populated from it's 2010-12-30 record, and 00002 is good. I want to know which items are not
good, and report the results to engineer to modify the wrong record in DW.
ID LOAN_NBR CURRENT_PRINCIPAL LOAD_DT LOAN_STATUS
1 00001 1000 2010-12-5 APPROVED
2 00001 800 2010-12-30 APPROVED
3 00001 0 2011-3-1 NULL
4 00002 500 2012-5-1 APPROVED
5 00002 0 2012-6-12 APPROVEDHi,
If I understand correctly, you want to highlight the records that have incorrect Loan_status values.
To achieve this requirement, we can create a table with the table data, then add a column with correct Loan_status value in a report. Compare the Loan_status column and new column to find out the incorrect values, then highlight it. The following detail
steps are for your references:
Create a report in a SQL Server Reporting Services Project.
Create a dataset with the sample data.
Drag a Table with the dataset to design surface.
Add a group grouped by LOAN_NBR, then insert all the fields to the table.
Right-click the LOAN_STATUS column to add a new column with Right option, then insert the expression as below:
=iif(Fields!CURRENT_PRINCIPAL.Value="0",previous(Fields!LOAN_STATUS.Value),Fields!LOAN_STATUS.Value)
Click second row to change its BackgroundColor property as below, then the incorrect Loan_status value row will be highlighted:
=iif(Fields!LOAN_STATUS.Value=iif(Fields!CURRENT_PRINCIPAL.Value="0",previous(Fields!LOAN_STATUS.Value),Fields!LOAN_STATUS.Value),"Transparent","Red")
The following screenshot is for your reference:
Reference:
Create a Basic Table Report (SSRS Tutorial)
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Update other items with the same value when when column contains Y
CREATE TABLE TEST
( "QUATINTY" NUMBER(17,2),
"AMOUNT" NUMBER(17,2),
"ERRORRED" VARCHAR2(16 BYTE),
"PO" VARCHAR2(12 BYTE),
"LINE" VARCHAR2(10 BYTE),
"SEQ" VARCHAR2(14 BYTE),
"INVOICE" VARCHAR2(16 BYTE)
Insert into TEST (PO,QUATINTY,AMOUNT,ERRORRED,LINE,SEQ,INVOICE) values ('123',5,50,'Y','1','1','inv1');
Insert into TEST (PO,QUATINTY,AMOUNT,ERRORRED,LINE,SEQ,INVOICE) values ('123',5,50,null,'1','2','inv1');
Insert into TEST (PO,QUATINTY,AMOUNT,ERRORRED,LINE,SEQ,INVOICE) values ('125',5,50,null,'1','1','inv2');
Insert into TEST (PO,QUATINTY,AMOUNT,ERRORRED,LINE,SEQ,INVOICE) values ('125',4,50,null,'1','2','inv2');If you notice by the table above what im trying to acomplish is update the errorred column with 'Y' if any of the po and invoice are the same and have a 'Y' on the errored column.
in other words, i should end up with 'Y' in the errorred column for INV1.
Can someone point me in the right direction i cant for the life of me figuered this one out.Hi,
Here's one way:
UPDATE test
SET errorred = 'Y'
WHERE NVL (errorred, 'N') != 'Y'
AND (po, invoice) IN (
SELECT po, invoice
FROM test
WHERE errorred = 'Y'
;This assumes that po and invoice are not NULL. If either column can be NULL, then the solution might be a little messier, depending on the results you want, but only a little. Post some sample data (with NULLs) that shows what kinds of situations you need to handle, and the results from that sample data. -
Problem while inserting the same value on a primary key column
hi all ,
in my application there is a block with a pat_id column "primary key" ,
if the user inserts the same value in this column , a message appears asking me if i want to save the changes or not ,
i do not know what changes is the message asking about , and sure i do not want this message to appear to the user
when he insert the same values by mistake ?
thanksas a primary key field dont fill this with manually try use db seq.
Use pre-insert trigger . -
I backed up my ipad and iphone on the same computer, will it be shown on the same folder or different? Mine is window 7, try to find the back up file follow the step that apple provided, it shown only iphone instead of ipad. Pls help.
What do you see under Edit > Preferences > Devices?
tt2 -
How do i find the app ibooks on a Mac to download? Is it the same name or different now?
How do i find the app ibooks on a Mac to download? Is it the same name or different now?
There is no app for reading iBooks on a Mac!
-
Query parameters with the same name and different values
According to HTTP, multiple query or post parameters with the
same name and different values are permitted. They are transfered
over the wire in the following format -
name1=val1&name1=val2&name1=val3
The problem is that I can't see anyway of assigning multiple
parameters with the same name and different values to the request
object of mx.rpc.http.HTTPService. I have tried using the
flash.utils.Dictionary object as it does strict key comparison but
that doesn't work too. I have tried setting an array of values to a
property of the request object but that sends the request to the
server in the following format -
name1=val1,val2,val3
The java servlet engines throw exceptions when they see this.
Any help would be greatly appreciated.If you're not on 8.1.4 move there. 8.1.3 had limitations in the wsrp
release.
wrote:
I have an html select box that contains several values, and multiple
selection is enabled. When my code runs as a remote portlet, the
following is showing up in the soap monitor when I select multiple
values and submit the form:
<urn:interactionParams>
<urn:portletStateChange>cloneBeforeWrite</urn:portletStateChange>
<urn:interactionState>_action=addEmployeesToGroup</urn:interactionState>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}OldValue">
<urn:value>true</urn:value>
</urn:formParameters>
<urn:formParameters
name="P62005wlw-select_key:{actionForm.selectedEmployees}">
<urn:value>beatest1</urn:value>
</urn:formParameters>
In this case, I selected beatest1 and beatest2, but only beatest1 comes
through to the remote portlet. Is this a known bug, and, if so, is
there a patch or workaround available?
Thanks in advance,
Andy -
How find out the duplicate value from each columns.
I have below four columns,
How can i find out the duplicate value from each columns.
with All_files as (
select '1000' as INVOICE,'2000' AS DELIVERYNOTE,'3000' CANDELINVOICE,'4000' CANDELIVERYNOTE from dual union all
select '5000','6000','7000','8000' from dual union all
select '9000','1000','1100','1200' from dual union all
select '1200','3400','6700','8790' from dual union all
select '1000','2000','3000','9000' from dual union all
select '1230','2340','3450','4560' from dual
SELECT * FROM All_files
Output should be as per below.
1000 2000 3000 4000
9000 1000 1100 1200
1200 3400 6700 8790
1000 2000 3000 9000
Required to check uniqueness in cross columns.
Thanks.Try this (sorry about the formatting)...
WITH all_files AS (SELECT '1000' AS INVOICE,
'2000' AS DELIVERYNOTE,
'3000' CANDELINVOICE,
'4000' CANDELIVERYNOTE
FROM DUAL
UNION ALL
SELECT '5000',
'6000',
'7000',
'8000'
FROM DUAL
UNION ALL
SELECT '9000',
'1000',
'1100',
'1200'
FROM DUAL
UNION ALL
SELECT '1200',
'3400',
'6700',
'8790'
FROM DUAL
UNION ALL
SELECT '1000',
'2000',
'3000',
'9000'
FROM DUAL
UNION ALL
SELECT '1230',
'2340',
'3450',
'4560'
FROM DUAL),
t_base
AS (SELECT invoice
|| ','
|| deliverynote
|| ','
|| candelinvoice
|| ','
|| candeliverynote
str
FROM all_files),
t_str
AS (SELECT str || ',' AS str,
(LENGTH (str) - LENGTH (REPLACE (str, ','))) + 1
AS no_of_elements
FROM t_base),
t_n_rows
AS ( SELECT LEVEL AS i
FROM DUAL
CONNECT BY LEVEL <=
( SELECT SUM (no_of_elements) FROM t_str)),
t_build AS (SELECT t_str.str,
nt.i AS element_no,
INSTR (t_str.str,
DECODE (nt.i, 1, 0, 1),
DECODE (nt.i, 1, 1, nt.i - 1))
+ 1
AS start_pos,
INSTR (t_str.str,
1,
DECODE (nt.i, 1, 1, nt.i))
AS next_pos
FROM t_str
JOIN
t_n_rows nt
ON nt.i <= t_str.no_of_elements),
t_build2
AS (SELECT RTRIM (str, ',') AS original_string,
SUBSTR (str, start_pos, (next_pos - start_pos))
AS single_element,
element_no
FROM t_build),
t_build3
AS (SELECT single_element,
COUNT( * )
OVER (PARTITION BY single_element
ORDER BY single_element)
ele_count
FROM t_build2)
SELECT DISTINCT INVOICE,
DELIVERYNOTE,
CANDELINVOICE,
CANDELIVERYNOTE
FROM all_files, t_build3
WHERE ele_count > 1
AND ( INVOICE = single_element
OR DELIVERYNOTE = single_element
OR CANDELINVOICE = single_element
OR CANDELIVERYNOTE = single_element)I think this will be faster than the previous solution?
Cheers
Ben
Edited by: Munky on Feb 17, 2011 2:11 PM - "I think this will be faster than the previous solution?", nope - it's not :( -
How to find the RGB Values of a Color for Hyperion
When customizing your Hyperion forms, we come across situations where we need the exact RGB value of a given color. This article explains a simple technique to find the RGB values using MS Paint and the Calculator applications that come as standard applications with your operating system.
Here are the steps to find the exact RGB value of a given color.
1) View your Hyperion form using IE, scroll down until you see the color you want to find the RGB value and press the "Print Screen" button (in your keyboard).
2) Open MS Paint and click Edit -> Paste or simply Ctrl+V. What you saw in the browser will be copied as a new untitled image.
3) Select the Color Picker tool and click on an area that has the color you want to match.
4) Now go to Edit Colors... option and click on the "Define Custom Colors >>" button. The color you picked will be selected on this palette. At the bottom right hand corner you will see the Red, Green and Blue values you need. Note down the R,G,B values (given in decimal).
5) Now we need to find out the hexa-decimal values that correspond to those decimal values. This is where we use the simple Calculator. Open the Calculator application from Program -> Accessories. Switch to the scientific mode by clicking View ->Scientific.
6) By default it will be in the decimal number mode. Enter the R value (238 in this example) and click on the Hex radio button. The corresponding hexa-decimal value (EE in this case) will be shown in the dial.
The selected color in this case has the same value for R, G and B. (In fact, all shades of gray has the same values for R, G and B.) Therefore, the RGB value of the background color that we need is #eeeeee. Repeat step 6 to find out the hex value for the Green and Blue elements, if they are different.
Tip:
If you find it difficult to pick a color, zoom the image by pressing Ctrl+PageDown or using View -> Zoom -> Custom... option.These tips are to find the RGB color of HFM default row where row is text and text lines in data columns are also visible to business users as Yellow as an input cell. By applying the same RGB color you can apply the same color to your data cells or rows. This post shows how to identify color from any web view-able object.
Regards,
Manaf -
I don't even know if this is posible.
I'm using iwork '09
View PDFI hope I can clarify:
For our purposes here:
Table 1 = "Step 2 - Product Sizes"
Table 2 = "Option id Master"
Table 3 = "Export - Product Info"
Table 1:
The user would enter values for "productcode," "Horz," and "Vert"
"Size" would auto fill based on values in Horiz and Vert (I have this taken care of already).
Table 2: This is a completely static table that I want to search against. - Data from other tables in the doc does not alter or change the data in this doc.
We just want to look at table 2. Find the existing value in "table 2 : size" column that matches the "table 1 : size" column and then pull the "optionids" and "productprice" from that row.
Can the value from "Table 1 : Size" be used as a search term in "Table 2 : Size?"
Table 3: The user does not enter any values on this table.
"productcode" is pulled from table 1 - "Table 1 :: A5" = "Table 3 :: A5"
"optionids" and "productprice" are pulled from Table 2 columns "D" and "E" - however we do not know which Table 2 row it is pulling from until we enter data in Table 1.
As I'm writing this I'm realizing that
A. this is probably really confusing to you.
B. this may be impossible inside of numbers.
If you have some other method that would facilitate the same out come but be structured differently please let me know.
--- maybe to help you understand further what I am doing here is my current workflow:
I record the size of a piece of art.
Then I manually go to my "Option id Master" and find the same size.
I then copy the corresponding "optionids" and "productprice" cells. (these options control the prices displayed on my website)
I got to my "Export - Product Info" table and paste the values in the corresponding cells.
I was hoping to automate this as it takes a long time when you have hundreds of products.
Thanks for the help! -
Is it possible to store a multiple indexes for the same value extractor?
I ran into a situation where there were different queries that I was interested in doing that might have benefitted from having several indexes, sorted differently, but for the same ValueExtractor() instance.
Is this good practice, is it recommended, and is there a clean way to do it? It seemed like the only way I could logically "trick" the system into it would be passing some sort of "query type" constant into the ValueExtractor when it was created, and then making the equals and hashCode() methods on the ValueExtractor delegate to the constant for equality, but this seemed like a massive hack.Hi Kris,
First, try without each value extractor and see how the different queries compare in performance. You may find that you need only one. If you find otherwise, please let us know because it may indicate a good area for additional optimizations.
Second, you are correct that the value extractor is the key of the index, and thus to have two indexes on the same value, you will need two different value extractors (i.e. the hashcode/equals comment you made.)
Peace,
Cameron Purdy
Tangosol, Inc.
Coherence: Easily share live data across a cluster! -
Po Creation Date and Orader Datate are holding the same values or diffrent?
Hi All,
Please clarify on weather the PO Creation_Date at header level and Po Order Date at the Summary level both are having the same data or different.
Thanks,
Sathya.Sorry, but it's difficult to describe ... I'm not sure if I can recreate this on ApEx-Site, but I take a try.
Without pagination report is much slower than before.
The diffrence between the two output version is that the column
NVL(AVG(preisnext),AVG(preiscurrent)) - NVL(AVG(preiscurrent),AVG(preisnext)) Entwicklung
is computed as 0 in the using-items-version (wich is not correct).
I found out that when I replace the NULL-columns in the subquery (NULL preiscurrent // NULL preisnext) with static values (e.g. 0) it works again, but with average function the result is not correct.
Hoped that someone got this problem, too.
Just as I thought, I don't get the problem with a simple example version (http://apex.oracle.com/pls/otn/f?p=51163) :-|
And the strange thing is that it works when I started application for the first time this morning, but after changing Input Values it went wrong. (Meanwhile I logged out and in again to be sure that cache is cleared but no effects).
Edited by: user11884435 on 10.09.2009 01:31
Meanwhile I suspect that problem got something to do with source of an item: when it's static it's O.K.; when it's based on a query (SELECT TO_DATE(:P1_DATUM_NEU,'dd.mm.yyyy') - 7 FROM dual;) then it goes wrong ... seems that the subselect returns no rows because of this.
...to be continued ;-)
Edited by: user11884435 on 10.09.2009 02:44 -
YTD and accumul. depreciation have the same value when dpis is 2 years ago
Hi all
I am using FA and i have some problems. I have just setup this module and now i want to migrate assets in the system. The customer gave me an excel with the following fields that want to be in the system like: asset cost, accumulated depreciation, date placed in service, ytd accumulation and so on.
the problems are:
1) when i want to enter new asset manually the ytd depreciation and accumulated depreciation are required to be equal. ok so far, i register new asset on test environment and when i enter the date placed in service for example two years ago (because that is the real date placed in service of the asset) and run depreciation, the system has calculated correctly the accumulated depreciation, but has calculated the same value even for YTD depreciation which is not true, because in this case accumulated depreciation and ytd depreciation are completely different. how to solve this problem? How can i put correct values in this fields?
2) when i enter these assets directly in the fa_mass_additions table according to the fixed assets user guide, i have the following errors: when i put "ON HOLD" on queue name, and open these assets on the system, the on hold field has no value (is empty)
When i try to run post mass additions, the report is not finding the parameter (book) because the system is giving en error message telling me that there is no value in this list of values
please help to solve this problems because i am not being able to migrate assets for the company.
Thank you and best regardsgaskins,
You may have different Color Settings, and if you use Pantone you should be aware that the whole interpretation has changed (a number of times, most radically recently).
If you say more, more can be said. -
Import data from few tables and export into the same tables on different db
I want to import data from few tables and export into the same tables on different database. But on the target database, additional columns have been added
to the same tables. how can i do the import?
Its urgent can anyone please help me do this?
Thanks.Hello Junior DBA,
maybe try it with the "copy command".
http://download.oracle.com/docs/cd/B14117_01/server.101/b12170/apb.htm
Have a look at the section "Understanding COPY Command Syntax".
Here is an example of a COPY command that copies only two columns from the source table, and copies only those rows in which the value of DEPARTMENT_ID is 30:Regards
Stefan
Maybe you are looking for
-
Write on external Hard drive MyBook NFTS
I've got a WD MyBook 300 GB which i used on my XP PC. It's formatted in NFTS becauseof the large videofiles. I stored lots of files from my PC. No i use my MacBook i like to use it also as a backup unit for my Mac. In the info panel I can copy files
-
JDeveloper performance with XSL Mapper
Hi All, Not sure if this is the right place to ask this question since it has to do JDeveloper performance with SOA and not ADF. In the XSL Transformation mapper tool, whenever I do an auto-map between two large schemas, my JDeveloper memory usage hi
-
Photoshop Elements 6 tutorial online
Can someone tell me where I can find on Adobe site the Video tutorial, especially using layers. G
-
Exported JPEGs from Lightroom have a significant color shift from how they appear inside LR and PS3, which is a distinct magenta shift and oversaturation. I have read a number of related posts here and elsewhere that explain the importance of setting
-
Green / Magenta squares after using Cover Flow or the like
I'm on a C2D white 20" iMac upgraded to 10.5.1 Leopard. Whenever I use Cover Flow, or Front Row, or Time Machine, I get these squares all over the screen and I can only clear them out with a reboot. I tried searching on the issue here but most things