Firebug 1.7 only shows html class=" head /html and only part of CSS, why?

Just now downloaded firebug 1.7 for firefox 4.0. open the window and see only few lines of html down to </html>. this is the same for every page I look at. as far as css goes, only part of my css page can be seen. what is the matter? am I missing part of the add on or what? thank you.

I must be dumb as a rock. I don't see answer 202255 anywhere. I see text size issues, and console issues, don't see my issue or question in the google group you sent me to. help!

Similar Messages

HT5622 Hello! I change my ID Apple and now when I try to make an update, Iphone show me my old ID and ask the password. Why is that? Why the phone don't see my new ID Apple?

Hello! I change my ID Apple and now when I try to make an update, Iphone show me my old ID and ask the password. Why is that? Why the phone don't see my new ID Apple? I can not make any update because the old Apple ID don't work any more. I check and I have my new user all over in my phone. Help me please!

All apps are tied to the Apple ID that downloaded them.
They can not be transferred to a new Apple ID.
You will have to use the Apple ID and password used to download them.
If you do not wish to do so, erase them and download them under the new ID. This will wipe any data in the app and you will have to pay for them again.

JEditor Pane can shows HTML, and in AWT?

Hello,
I need to show a web page in a Frame, with hyperlinks. I have found that this is possible, and very easy in Swing, with a JEditorPane, but can I do this in AWT?
Thank you.

These are all in javax.swing.text or javax.swing.text.html packages, but an EditorKit extends to Object not to Component, JComponent, Container...
Then these will not decrease speed. However, these could use a swing class :( but i don't think.
If you see sources, they import java.awt or javax.swing.text.* but not javax.swing.*
( I didn't verify all class, then be careful )

Servlet showing HTML page

I ma using Tomcat as standalone server.
have servlet showing HTML page which has frames in it . All frames are linked to some html pages. These pages are stored in
webapps/project directory and servlet is in
\Tomcat 4.1\webapps\Project\WEB-INF\classes
Tomcat can show the servlet with al frames witherror402 means it is unable to take html pages from webapps/project
what's wrong
my codes are
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class Htmlservlet extends HttpServlet {
public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException,IOException {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("<HTML>\n"+
"<HEAD> <TITLE>A frameset document</TITLE></HEAD>\n"+
"<FRAMESET rows= \"20%,40%,40%\" >" +
"<FRAME src=\"contents_of_frame3.html\" frameborder=\"0\" scrolling =\"no\">"+
"<FRAMESET cols=\"*,200\">"+
"<FRAME src=\"contents_of_frame1.html\" scrolling=\"no\">"+
"<FRAME src=\"contents_of_frame2.gif\" >"+
"</FRAMESET>"+
"<FRAME src=\"contents_of_frame4.html\" frameborder=\"0\"> </FRAMESET>"+
"</HTML>");
}

Hi,
Please please try this
<FRAME src=\"/contents_of_frame1.html\"
thanks,
nvseenu

Preview in browser shows html code

Can't get DW to display my design, I go to "preview in
browser" and it goes to the browser and shows the html code
instead. Can someone help me fix that?

<%@LANGUAGE="JAVASCRIPT" CODEPAGE="65001"%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />

<title>Untitled Document</title>



<style type="text/css">

</style></head>
<body class="twoColElsLtHdr">
<div id="container">
<div id="header">
<h1><img src="../MASTHEAD.jpg" width="720"
height="269" /></h1>
</div>
<div id="sidebar1">
<blockquote>
<pre> </pre>
</blockquote>
<h3>Landscaping</h3>
<p><strong>Lawn Care</strong></p>
<p><strong>Chemical
Services</strong></p>
<p><strong>Tree
Services</strong></p>
<p><strong>Retaining
Walls</strong></p>
<p><strong>Water
Gardens</strong></p>
<p><strong>Special
Projects</strong></p>
<p> </p>
</div>
<div id="mainContent">
<h1> GET THE EDGE</h1>
<p>Custom Edges Enterprises gives you the edge when it
comes to landscape design, implementation and
maintenance.</p>
<p>Residential and commercial properties thrive under
the supervision and attention of Custom Edges
Enterpirses.</p>
</div>
<br class="clearfloat" />
<div id="footer">
<p>Footer</p>
</div>
</div>
</body>
</html>

DMP does not show html link

Hi,
We are deploying a DMM system with DIgital Signs, version 5.3.0. We are using DMP 4310G with the beta version of firmware 5.4 as this is the only one with a browser.
We need to show Cisco unified Intelligence Center ( CUIC ) reports of IPCCE.
When I first tried to use the GoTo URL method with play now, it worked fine. with the same link, I created a Presentation using the designer and we only saw a black box on the screen. I can see that the startup URL changes ( if I do play now with go to url method, then Startup URL chnages to what I push and it clears the contents of the Flash Variables Data_Url, if I create a presentation and schedule it to play at certion intervals then it shangec the Flash Variables URL and the Startup URL stays as default ).
Now the problem with the Play Now + Go To URL is that you cannot schedule and cannot erally arrange the screen as you want. But Still, this might have been a solution at least until we figure out why it is not working with Presentation + Schedule method.
So I have created a new report on CUIC by increasing the Font size to 30 ( by default it is 10 ). It shows fine, I again created a GoTo URL also cerated a presentation with the same link. The preview on the designer looks fine.
So I pushed the GoTo URL using play now to one DMP and scheduled the presentation for the other DMP. The one with presentation shows a big black screen and the other one shows a big white screen.
So if anybody have any idea what might be going wrong, or what I may be doing wrong taht wuld be great.
By the way I am uisng the permalinks of the Dashboards from CUIC. I tried with both http and https.
Thanks

Hello,
DMS 5.4 is officially out, so you could test this with a full 5.4 system. DMP running 5.4 is not officially supported with DMM running 5.3. See the compatibility matrix at:
http://www.cisco.com/en/US/docs/video/digital_media_systems/dmscompat3.html#wp1207463
Please notice that the 5.4 release do not support Show and Share and the scheduling system has been changed with a new Channel feature.
Regards,
Marco

Printing Header and Footer once in HTML and on all pages in RTF and PDF using one RDF

Hi,
I am using a single RDF to generate reports in HTML,PDF and RTF.
For printing the header only on the first page I used the
following trigger
begin
srw.get_page_num (page_num);
IF upper(:P_FORMAT) = 'HTML' THEN
if page_num = 1 then
return(true);
else
return (FALSE);
end if;
ELSE
return (TRUE);
END IF;
end;
I alo require to print the footer once on the last page in case
of HTML and on all pages for RTF and PDF.Is there any way I can
get the total number of pages or is there any other way to
acheive this. ???
Any help would be appreaciated .
Thanks,
Alka

Generally, one template can not create nice output in all formats. In your case, you would need a format parameter to suppress headers/footers if it's value is 'EXCEL'. The problem is (I wish someone would correct me on this) that we can not refer the standard parameter already there and have to create another, user-defined parameter.

Migo is not showing the excise tab - header level and item level

Hi,
i have created one PO with excise and i have created MIGO with only capture excise invoice, in MIGO before saving the document system is showing the excise basic, cess and higher education cess in excise tab, header level as well as item level. After saving the document, if i go to dispaly view of the MIGO document system is not showing the header level as well as item level excise amount. The tab itself is not appearing. Can any one help me on this.

Hi,
There are two kinds of statuses, system status and user status.
You can only influence System status if you execute a business transaction that changes the system status.there
are four system statuses open, In process,Released and Completed.
User status can be created as additional information to the system status in any numbers.But for this you
need to define a status profile which would further be assigned to transaction type(header status) and
item categories(item status).
The header status is independent of the item status. One exception is the status Completed.
If all items have the status Completed, the header status is also set to Completed.
For defining a status profile you need to go to
SPRO>Customer Relationship Management>Transactions>Basic settings>Status Management.
Hope this helps.
Regards
Sidd

Not showing past episodes of podcasts. i.e. Comedu Bang Bang shows 301 episodes but I can only see ten. WHY?

Not showing past episodes of podcasts. i.e. Comedu Bang Bang shows 301 episodes but I can only see ten. WHY?

When I search the store for 'Comedy Bang Bang', on the results screen I get :
To the far right of the Podcast Episodes heading is a 'see all' button/link. Or clicking on the podcast name above it takes me to that podcast's episodes.
On the list for that particular podcast I see whitespace if I scroll down the screen too quickly, but scrolling back gets them to (slowly) appear.

Show html in Grid, Forms

I want to show parts of web pages inside a table.
How does one show html inside the cells of grids or forms?

hi Patricio,
In Content Management,I have created a folder "abc" under the repository "document".This folder will hold the xml files created for the news items.
The document repository is predefined and has been assigned the Repository Service "tbp".
i have enabled the time-bound publishing for the folder "abc" in its Detail section.
For the news reader , I have made the folder "abc" as "read only".
But the news reader is not able to see the news.
My xml form for the news Author has fields for entering date and time for both "Valid from" and "Valid To".
On saving the news item ,i can actually see these values in the property "LifeTime" of the news document that has been created.
I even set these ValidTo and ValidFrom at the "LifeTime" property also.
But nothing is working.
Also could u pls elaborate on ur statement :
"time-dependent publishing service requires the application property service."
Nothing is working for me.
Pls help.
Regards
Saurabh

How to check the show base class members in teststand programatically using c#

I need to check the checkbox indicating show base class members in teststand using .Net adapter programatically through c#.can I get any help.Using CallMethod , I need to call a method "GetItemByName" .It is only possible by enabling the show Base Class Members checkbox.Any Help?
Attachments:
ex2.gif ‏2305 KB

bannerghatta -
This is specified by the DotNetModule.MemberFlags property. The DotNetMemberFlags consist of DotNetMemberFlags_Static (0x1) and DotNetMemberFlags_TopLevel (0x2). These can be used individually or you can perform a Bit-Wise OR to use them together.
In your case, the Show Base Class Members check box corresponds to the DotNetMemberFlags_TopLevel (0x2). If this flag is set, the box is not checked. If the flag is not set, the box is checked. Thus, you will either want to set DotNetModule.MemberFlags = 0x0 or 0x1 dependent on whether or not you are using a Static Member.
Since you seem to be doing a lot with the DotNetModule, here is a link to the DotNetModule Help online.
Hope this helps.
Message Edited by Manooch_H on 01-07-2010 09:27 AM
Manooch H.
National Instruments

Text Catalog showing HTML tags

We are having an issue after applying Bundle #22 for HCM 8.9 where the calls to the Text Catalog are now showing HTML tags. Has anyone else seen this? Im trying to figure out if its the bundle or something maybe with our customizations that have affected this change. Basically the page where the text from the text catalog displays now shows not only the text, but raw HTML tags as well on the page. Example: BR, B
Thanks!
Edited by: CoryU on May 11, 2010 2:00 PM

We are having an issue after applying Bundle #22 for HCM 8.9 where the calls to the Text Catalog are now showing HTML tags. Has anyone else seen this? Im trying to figure out if its the bundle or something maybe with our customizations that have affected this change. Basically the page where the text from the text catalog displays now shows not only the text, but raw HTML tags as well on the page. Example: BR, B
Thanks!
Edited by: CoryU on May 11, 2010 2:00 PM

JSP, downloading files and show html page

I like to download files and show a html page on JSP.
With the source following, downloading works well.
But, it is just remained on the previous page, not showing the next html page.
Someone tell me why is it?
<%@ page import="java.io.*, java.net.URL"%><%
String file_name = request.getParameter("file_name");
File fileDir = new File(config.getServletContext().getRealPath("upload/"));
File theFile = new File(fileDir, file_name);
FileInputStream fin = new FileInputStream(theFile);
response.setHeader("Content-Disposition","attachment; filename=\"" + theFile.getName()+"\"");
response.setContentLength((int) theFile.length());
BufferedInputStream bf = new BufferedInputStream(new FileInputStream(theFile), 8096);
int i;
while ((i=bf.read()) != -1)
out.write(i);
bf.close();
out.close();
%>
<html>
<head>
<title>file download</title>
</head>
<body>
<p align="center"> </p>
<p align="center"><b><font face="Tahoma" color="#000000" size="2">You have
successfully downloaded your file(<%=file_name%>)!</font></b></p>
</body>
</html>

You's already close the JSP output stream befor you try and write your html confirmation, and I don't think browsers can provide the kind of functionality you're trying to demonstrate here. A browser will download the file and open it directly itself or using another application based on user input (e.g. save as, open file, etc.). Once the file is opened or downloaded, it's done!
I think your best bet is to show a dialogue that the user's download should begin, then set the pages href w/ JS to the location of the file, same way other sites that allow you to download files do it. Go take a look at download.com or something like that.
Hope that helps.

I have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code?

i have 5 html pages that share a common header, footer, and sidebar. how do i use my nav bar to change the content of the body without duplicating a lot of code? thank you!

i inherited the website. It’s for a non-profit and is not very
sophisticated, and neither am I in webdesign. It currently has multiple
pages that are identical except for that body section, so whenever i change
the navigation (in the sidebar) I have to update every html page. I want
to have one basic page, and just call in the different body content based
on the link the user selects from the nav bar. How can i do that using a
script? i am using Dreamweaver.
~ in love and light ~
Jeannie
On Sat, Feb 7, 2015 at 4:07 AM, Ben Pleysier <[email protected]>

How do I only show my inbox on email and not all the support folders

How do I only show my inbox on email and not all the support folders

There is a third-party program called Attachment Tamer that will do that for you. In the Terminal, you can type this:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
Also note that while Attachment Tamer does some things with the encoding that makes certain email clients display the item as an attachment, what shows up at the receiver's end is solely dependent on their email client and its settings.

Firebug 1.7 only shows html class=" head /html and only part of CSS, why?

Similar Messages

Maybe you are looking for