Firefox 5 disabled my mcafee LIVE site advisor...can i get the version 4 reinstalled onto my comp?

in order for me to run my mcafee LIVE site advisor, i had to switch over to Internet Explorer, which i dont care to use after using Mozilla for a number of years....Mcafee is in process of making this compatible, but, in the meantime....can i get Mozilla version 4 back onto my computer? or has the version been made obsolete?

Due to security vulnerabilities, rolling back to Firefox 4.0.1 is not recommended.
Have you considered alternate site reputation tools, such as the WOT add-on?
Here's the process to roll back to 3.6.18:
First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
Close Firefox 5.
You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
Note: I haven't actually tried this myself!

Similar Messages

  • I have a purchased version Chess (from Apple) on my old iPod. Today I got a new Gen. 5 iPod. HOW can I get the chess app onto the new iPod, or do I have to purchase it again?

    I have a purchased version of Chess (from Apple) on my old iPod. Today I got a new Gen. 5 iPod. HOW can I get the chess app onto the new iPod, or do I have to purchase it again?

    Either sync it from your iTunes library or redownload it directly to the iPod by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

  • I need a copy of the PDF guide for version 12 I have just installed - the link that appears in searches takes me to version 13. Where can I get the version 12 copy please?

    I need a copy of the PDF guide for version 12 I have just installed - the link that appears in searches takes me to version 13. Where can I get the version 12 copy please? (I bought the Photoshop Elements and Premiere Elements pack, but have only just installed and started to use).

    Hi,
    You can find the Help Archives at Adobe Premiere Elements Help | Archive
    Regards,
    Premiere Elements Team

  • I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the firefox homepage to come up. How can I get the Yahoo homepage off and get the firefox homepage on?

    I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the Firefox homepage to come up. I have tried to reinstall Firefox, but the Yahoo homepage still comes up. How can I get the yahoo page off and get the Firefox page back on?

    Here are instructions to [[How to set the home page#w_restore-the-default-home-page|restore the default home page]].

  • HT1414 i backed up tha data on my iphone before i unlocked and restored as "new." how can i get the data back onto my iphone?i backed up tha data on my iphone before i unlocked and restored as "new." how can i get the data back onto my iphone?

    Hi,
    I wanted to unlock my at&t iphone 3gs that i had for 3  years.  i was told to back up the data on my phone and then restore it as new.  now i don't have any data i had before it was restored. how can i get that data back onto my iphone 3gs?  can i put that data on my ipad?

    Is it an iTunes backup or an iCloud backup? If iTunes, connect the iPhone, right click on the name of the iPhone under the DEVICES section in iTunes. Click on Restore from Backup.
    If iCloud, on the iPhone go to Settings > General > Reset > Erase All Content and Settings. When the device powers back on, you will see the original setup screens you saw when your iPhone was fresh out of the box. One of these screen asks you if you want to restore. Choose Restore from iCloud backup.

  • Can I get the version info using the SDK?

    Can I get the verion info from the SDK (Web Services SDK or Enterprise SDK)? For instance, for BOE XI R2, I can get some info like this "boexir2", so that I know jar files are for BOE XI R2. If this info can be retrieved, could you please tell me how I should do? Thanks.

    Sure, but the odds are that you'll find the regular non-upgrade boxed version for less than the upgrade price, especially as we get nearer the holidays.

  • I've downloaded firefox 4 only to find my system doesn't support it,I replaced older version of firefox before I learned my mistake, how can I get the older version back?

    I'm using a Mac os x 10.4.11
    After downloading Firefox 4 I put it in my applications folder replacing the older version of firefox,now I've learned it is not supported on my system.Please help

    There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
    If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

  • SB Live Value - Where can I get the Surround Mixe

    I just reinstalled my Windows and am trying to find a way to install the Surround Mixer for the SB. I can't find the original CD, and have been looking online for a couple of days already. The software used to be available in the Creative site, I think I downloaded it from there (here) the last time.. It should be available, right?

    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=8432

  • Can I get the Version a Crystal Report Was Designed Against

    Hi,
    I'm working on a web application developed in C# using the Crystal Reports runtime 10.5 that came with Visual Studio.
    What I am trying to do is to check the version of a Report File that the application is trying to run before actually running it.
    So that a Report written in Crystal Reports 11 can be flagged as being potentially incompatiable (as it may contain new features not supported by the runtime).
    Is there any way to get this version number in C# code?
    Any help would be much appreciated.
    Thanks
    Steve

    Thanks for the reply.
    In the application I'm working on people can write and upload their own Crystal Reports.  The application then runs these reports for them (also doing other things such as exporting (PDF) and emailing the report).
    At the minute, and in past releases the application uses the 10.5.3700.0 runtime.  Everything functions fine in the application.
    My only concern is that a user could write a report in Crystal 2008 using functionality that is in Crystal 2008 but not supported by the 10.5.3700.0 runtime.
    Therefore when a user uploads a report I was hoping to analyse the rpt file to find out what version they used to design the report.  Then if it is not designed in version 10, inform them that some functionality may not be supported by the current runtime.
    I've had a go through code and found a property called MajorVersion which seemed to be just what I wanted, but it was Non-Public so unfortunately this wasn't available to use.
    ((CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper)((CrystalDecisions.CrystalReports.Engine.EngineObjectBase)(sInfo)).m_rasRptClientDoc).MajorVersion
    I was hoping to go for this solution of warning users rather than compiling using the Crystal 2008 runtime, as updating the runtime may incur a cost to current customers who are happy using 10.5.3700.0.
    I hope that is a bit clearer.

  • Firefox will no longer open and I can not get the profile manager to open either. What do I do?

    I tried to open firefox this morning, and it would not open. I tried to uninstall and reinstall several times and even deleted all of my information. I looked it up on your site, and it said to open the profile manager. I followed the directions on how to open it, and it too will not open. I tried several times to open it as well. I need help. I only use firefox and have for years, and I have never had this problem. What do I do?

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

  • Upgraded to XP. I have SB Live Value but can't get the old software to lo

    I have 2 cd's, one for Windows 98 and Windows NT 4.0, the other is for Windows 2000 and Windows ME.
    I've tried to use both for my new clean XP Pro install and neither will install. I downloaded the XP Creative PlayCenter Download for Creative Sound Blaster Li've! file but it of course can't find any software on my computer to update.
    I miss all the little bells and whistles that I had with Sound Blaster on my 98se install.
    Any suggestions how to get this to work?Message Edited by ancient53 on 2-05-2005 :55 PM

    http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=25677

  • When/how can I get the version of Windows 10 for the Raspberry Pi?

    All I have heard so far is the announcement of its availability. What version do I need? I have bought the new Pi and have some experience with the previous version with Linux

    It hasn't been released yet but you can sign up for
    here so you'll get all the latest updates.

  • How can i get rip my DVDs onto my comp so i can put them on iPod

    i tried "HandBrake for Windows" and it didnt work anybody have any suggestions on how i can rip my DVDs onto iTunes so i can put them on my iPod Thanx 4 Readin

    Follow these instructions:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

  • How can you get the itunes app onto your computer so I'm able to get music off my ipod?, how can you get the itunes app onto your computer so I'm able to get music off my ipod?

    i got a new computer and im unable to get the itunes app on there to conect my ipod to it and get my music and pictures off of it. does anyone know how im able to download itunes on a laptop?

    Click Itunes at the top of this page and download it.
    The ipod is not a storage/backup device.  The sync is one way - computer to ipod.  The only exception is itunes purchases:  File>Devices>Transfer Purchases
    You should copy everything from your old computer or your backup copy of your old computer, to your new one.

  • How can I get the version of the GPIB driver from Visual Basic ?

    I want to readout from visual Basic which version of GPIB-Driver is installed on the PC. I must change some parameters for my application when GPIB 2.0 runs instead of 1.7.
    Thanks for any solution...

    Hi,
    The driver should create a key in registry depending on the driver version. Check for the existance of HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\NI-488.2M\ (In my case I had a folder called 2.00).
    Hope this helps out.
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

Maybe you are looking for

  • Bit Locker on windows 2008 R2 Virtual machine

    Hello there ! We have a a number of Windows 2008 R2 machines and we wish to provide an encryption mechanism for each Virtual machine. It's a VMware environment and all the VM files go into NFS drives. Do you think , Bitlocker will help ? Is Bitlocker

  • Unable to upload files to wiki service

    Hi, I tried today to enable the wiki service for the first time.  Everything seemed ok-it turns on, I can log in, I can create wikis and files.  However, when i attempt to upload a file the spinner continues forever and the file does not upload.  Loo

  • Apple Lossless hiccups/drop outs/pauses

    Hi Has anyone tried Apple Lossless files with the Shuffle 3G yet? Does it choke on them, i.e. hiccup/drop out/pause a few seconds into a song, like the Nano 3G did? I'd like to know before buying, as this was a major irritation for me, and this is th

  • Object in URL not valid

    Hello, I hope that someone can help me with my problem: I have a BSP-Application where I have attachments. and if I want to show one attachment i most of the time get the error object... in URL not valid. For example: BSP Exception: Das Objekt 7D4925

  • Scheduling Process flows

    I have created process flow and created and schedule and attached it to the process flow thru configure and refferred calander and depoyed the process flow again. But the flow doesnt start. Is there anything else to do. I read in form that some _job