Firewire and esata on a single expresscard - does it exist?

Firewire and esata on a single expresscard - does it exist?
I am wanting to connect two Firewire cameras and an esata external drive simultaneously. Does an expresscard exist that can help me do this??

So you are looking for an express card with 3 firewire slots? The best I've seen is 2 firewire, 1 usb.
http://www.sonnettech.com/product/fwusbexpresscard34.html
But you can do more searching via google.

Similar Messages

How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.

Create a folder on the desktop and share with everyone if it does not exist on a Windows 7 PC - No Domain

I have a script that needs to be modified to create a folder on the desktop and share with everyone if it does not exist on a Windows 7 PC - No Domain. Here is the script, need help at bottom
=======================================================
Set objShell = CreateObject("WScript.Shell")
objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
IF Right(objComputer,3) = "000" Then
Else
strShortcut = objShell.SpecialFolders( "Desktop" ) & "\%username% Share.lnk"
strShortcut = objShell.ExpandEnvironmentStrings(strShortcut)
Set objLink = objShell.CreateShortcut( strShortcut )
objComputer=objShell.ExpandEnvironmentStrings("%ComputerName%")
objServer=Left(objComputer,7) & "-000"
objLink.Description = objShell.ExpandEnvironmentStrings("%username% Share")
objLink.TargetPath = objShell.ExpandEnvironmentStrings("\\" & objServer & "\Users\%username%\Desktop\%username% Share")
objLink.Save
End If
=======================================================
if "C:\Users\%username%\desktop\%username% Share" exits do nothing
if not create the folder and share it with everyone read only
======================================================
The section directly above is what I need to add, anyone have a clue how to make this work?

Bill: Can you suggest a site? I am in the weeds here trying to get this done yesterday. I have been reading code and trying to figure this out since yesterday morning. I have to roll out this image to 2 dozen machines and
this is holding us back. Any idea which site I can post to for help?
The bigger issue is that you have been given the answer to this in many different forms and, because you have no technical background, you fail to see what is being shown to you. That is why I have repeatedly suggested that you hire a consultant.
The link to the learning material is at the top o this page. You can also search the web for Windows consultants.
In the learning link you can also look up how to manage files. If, in the beginning you had chosen to use the learning materials you might not be in this bind.
Look up and research the FileSystemObject.
¯\_(ツ)_/¯

HT1688 why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore.

why do i have to reauthorize a computer that was already authorized, the computer i purchased some songs on does not exist anymore, and the email for that account does not exist anymore. i can reset password because i doent know what the old one was

Hi lgmmo,
I think your best best to get this resolved is to contact Adobe Customer Care. Here's the contact info: Contact Customer Care.
A quick Chat session should get you fixed up.
Please let us know if you have additional questions.
Best,
Sara

I have a device that shows up in my airplay device list on my iMac, and my phone. This device does not exist. How do I get it out of the list? I would like to drop it before I add new airplay devices to my network.

I have a device that shows up in my airplay device list in iTunes, and on my iPhone that does not exist. How do I delete it? I have OS X 10.10.1 on my iMac, and iOS 8.1.2 on my iPhone 5. I would like to get it out before I add new airplay devices to my network.

I called Apple tech support. The device turns out to be a WiFi extender. I never would have guessed that the extender would show up on the list since I wouldn't think of it as an airplay device, and in the list, it shows a little speaker icon. In the process of talking with Apple, I gained a greater understanding of how airplay works.
It turns out that there is no stored list of devices in a file on the mac, or anywhere else. I have seen a lot of traffic on the web from people trying to modify this list, but there isn't one. iTunes, and other devices simply poll the network for airplay devices from time to time.
Have a very happy holiday!
I would like to get rid of "just give me the aster, and stop wasting my time", and replace it with my name. The Apple tech support guy never saw that before. Just my luck.

Support, please add a place for the Z30 and fix the "The specified template does not exist or is empty" error on this page

Please get the web site designers to fix this forum. There is no Z30 "place" and there is an error message that shows up every time.
The specified template does not exist or is empty

Make sure the SharePoint Server is joined to Active Directory. Also validate that the Web Application Application Pool account is running as a Domain User (rather than say Network Service).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Applications APIs and ORA-00942: table or view does not exist

As a low privileged user (non apps account), I am attempting to call the hr_employee_api from a wrapper pl/sql block that is owned by the account. I am receiving the "ORA-00942: table or view does not exist" error message. It would seem that the API is executing with invoker's rights. However, the API does not seem to be coded for invoker's rights.

Never mind, it IS coded for invoker's rights. DUH!

Upgraded to Yosemite It's a nightmare!! Itunes and Safari will not open Iphoto does not exist and the list goes on!!

I've spent all day trying to fix all the problems I'm encountered after updating to Yosemite on my MacBook Pro today. It's been a waste of a day. Nothing I have researched has helped. I wish I never updated. What is ironic that most of the things that do not work or Apple i products. I don't understand cloud but have a feeling this is the cause of most of the problems.
After update my computer prompted me to say cannot connect to Icloud Drive (What I don't understand I cloud and didn't know I had an Icloud drive).
Itunes will not open at all and it does not even try to open(I've downloaded it again to no avail).
Iphoto has a Circle slash mark through it so it's not even avaliable.
Safari will not open just like Itunes.
Icloud in preferences just keeps spinning like it's looking for Icloud drive. (Even though I don't use this I feel it is the problem)
So I have no access to my music, my photos cannot get on the internet with Safari Browser.
I'm afraid of what else probably doesn't work but I've been so consumed with the top three I haven't got to really explore the rest of all the apps.
My main concern at the moment are my pictures and my music.
Please Help, Thank you so much!!

iPhoto is still in your Applications folder. Your iPhoto Library is still where it was.
Repair the Hard Drive and Permissions - Yosemite, Mavericks, Mountain Lion or Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu. Select Restart from the Apple menu.
Now, download and install the OS X Yosemite 10.10.3 Combo Update.

Acrobat 9 Download on Wondows 8.1 produces Error 1309 and 2318: Adobe/Standard/Data.cab does not exist

Has anyone had this error during download on Windows 8.1? Thanks

Hi Bryan,
Thank you for posting on the Adobe forums, this error occurs when the installer cannot locate the Data1.cab file on your system or the required files with in the Dat1.cab is missing.
The only resolution to it is to download again, also, Acrobat 9 is not tested and developed for Win 8.
Thanks,
Vikrantt Singh

Company code and Account code does not exist in SKB1 while entering GL Tran

I have created chart of accounts in the co code but getting error msg while posting entry in <Company Code>and<GL Account> transaction that entry does not exist in table SKB1. I have copied COA from existing SAP COA.
I was able to find the solution for the following messages
1.     Fiscal Variant not connected to company code
2.     Open Posting Period u2013 period 032009 not open (June-3)
3.     The number range 01 is missing for year 2009
4.     Document Number not defined
5.     No amount tolerance range entered for this company
6.     Entry Company code no does not exist in SKB! (G/L account company master)
7.     Company coode ZR02 is not attached to field status variant

Hello,
There is no such automatic copy function from Chart of Account Segment to Company Code Segment.
You need to write LSMW by recording and upload the GL accounts into company code segment.
Use the following guide for your guidance.
ttp://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Regards,
Ravi

Table does not exist odbc -2004

Hi,
I'm updating a UDO in SBO 9. PL11 by GeneralService via DI API
The code worked without problems, but I activated the option LOG from customizing options and get the following error:
"Table does not exist odbc -2004 "
sCmp = AccCommon.Main.Company.GetCompanyService
            oGeneralService = sCmp.GetGeneralService(LocalConstants.UDO_Colegiados)
            oGeneralParams = oGeneralService.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralDataParams)
            oGeneralData = oGeneralService.GetDataInterface(SAPbobsCOM.GeneralServiceDataInterfaces.gsGeneralData)
            oGeneralParams.SetProperty(LocalConstants.CAB_Colegiados.cCode, sNumCol)
            oGeneralData = oGeneralService.GetByParams(oGeneralParams)
            oGeneralData.SetProperty(LocalConstants.CAB_Colegiados.cEstado, LocalConstants.Colegiados.Keys_Estado.cInactivo)
            oGeneralService.Update(oGeneralData)
Any Idea?
Thanks!

Thanks,
We delete the UDO and returned to generate. We assume that there were changes in the structure that was not reflected.
Without changing the code works
Regards

'Screen does not exist' error after transported to Quality server.

I have a report program which is working fine in development server. It is transported to quality server and when executed it throws dump. There is a CALL SCREEN statement in the program and the dump shows screen 1001 does not exists. I checked the program on quality server and when i double clicked on the screen number, it tells screen 1001 does not exist and do you want to create??. I rechecked the program in Development server and confirmed everything is active and have been catched in the transport request. When I checked with the basis guy, he said there was a component conflict error with the request while transporting and he overrided it.
Please tel me what should I do to solve this issue. Its very urgent. Please help.
Thanks
Johan

Hi
You seem to have run into some trouble with transports. Did someone perhaps develop this report in the QA server?
I would suggest this:
In SE80. display your report. Then in the hierarchy on the left, right click on your report and select 'write transport entry' . This option will ask you to create a new transport for your report and all objects inside it. Take that transport to the QA server. It should include the entire report, including screens.
If you have trouble importing into the QA server, please provide the transport logs here.

"Transfer structure does not exist" while deleting data from a DSO

Hello experts,
while deleting data from a DSO I get the following messages:
@5B\QInformation@     Database table /BIC/AAKIVO1400 was deleted and recreated
@5C\QError@     Transfer structure does not exist
When I try it twice process works without any problems. I get then the following msgs:
@5B\QInformation@     InfoCube / DataStore object "AKIVO14" contains no data (yet)
@5B\QInformation@     Database table /BIC/AAKIVO1400 was deleted and recreated
So I think the first deletion works but ended with errors. What could be the reason?

Please check if data from new and chage log table is also deleted.
For the error message : Do you have 3.5 flow ? Check your transfer structure , if it is active and then again try to right click and delete data from DSO.
- Monika

The Specified Directory Does not Exist

Hi expert
could you help me with my problem , this word " The Specified Directory Does Not Exist" its some stupid question , isn't it ?
this is my sitiuation :
1. BPC version is SAP BPC 5.0.512
2. we are using MS Excel 2003
our user do some modification from BPC WEB (the BPC open excel file with many macro and add-in etc ... ), then user save using Save Dynamic Template sub menu from eTools menu , and raise message "The Specified Directory Does not Exist < directory path>/eEXCEL. "
the questions Are .
1. Could anyone explain why BPC try to save in Client Local Direcory not is BPC Server
2. Could anyone help me how to resolve the problem ?
(i am appolagize with my bad english )
thanks.

HI nvsleman ,
I had the same problem and I manually copied the eExcel folder (on my local harddrive) from a working application to the application in question.
Hope this helps
Sabine

Post Goods Issue - error : Class type does not exist - Message no. VK662

Hi,
I am trying to do Post Goods Issue and getting this error: Class type does not exist
When double click on the error, it shows it is a message no vk662.
Any help to resolve it is appreciated. Thanks in advance.
-Sri

Sri
There is a problem in batch determination.
The batch you assigned to the material does not have a class or if it has a class, that class does not exist.
Display the batch from the delivery item using MSC3N and go into the Classification tab. You should have a class of class type 22. See if that class exists in CL03 and its status in basic data tab. Work on these lines and revert.
Hope this helps.

Firewire and esata on a single expresscard - does it exist?

Similar Messages

Maybe you are looking for