How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

You can direct connect your MBA to the LaCie via USB 2 cable.  If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it.  Time Machine can access it either way.

Similar Messages

  • My new MacBook Air locked up during my first attempt to migrate information from my old PC

    I began the set up process for my new MacBook Air (2014).  I got as far as the Migration Assistant.  At first, my old PC (6 year old HP with Windows Vista) seemed to be communicating with my MacBook and transferring data.  There was a lot of time remaining on the countdown to completion of the transfer, so I went to bed while the computers kept migrating data.  I woke up, and the migration connection was lost.  My MacBook screen is saying it is "transferring data to the Mac"- but the screen is the same, and the connection has obviously been lost.  It seems to be locked up.  I cannot get out of the screen to do anything!  I would rather start the set up process all over without migrating any data at this point, and just start using my new MacBook.  Help!  How do I turn off the whole MacBook and start again?

    Never mind!  I realized that I needed to hold the power button down for longer than I thought to get the laptop to turn off.  I turned it off, then back on, and was able to begin the process all over and am now up and running!  Hoorah!

  • How do I get a new iMac to inherit Time Machine backups from my old iMac?

    After successfully migrating from my old iMac to my new iMac, I connected my Time Machine drive (containing the backup files from my old iMac).  Following the instructions from my Apple Genius Desk guru, I opened System Preference>Time Machine and selected the Time Machine drive to be my designated Time Machine for my new iMac.   I was presented with a dialog asking if I wanted to "Inherit the backup files that existed on the drive" (or words to that effect).  I selected "Yes".  I was told that this would create a continuous backup record, so that I would be able, using the "Enter Time Machine" command, to access all the backups going forward for my new iMac, but also all the files from my previous iMac, in a "seamless" chain of backups.  However, it didn't work out as I expected.  Looking in the Finder at the contents of my Time Machine drive, I saw that both the current and the prior backup files appeared to be there, all inside one folder, as I expected.  But using the "Enter Time Machine" command from the Time Machine drop-down menu I could not go back any further than the moment of migration to the new iMac.  On the upside, it seems like I will be able to recover old backup files using the Finder, but, on the downside it appears that I will NOT be able to use "Enter Time Machine" to return to search the backup files from my old iMac, in a "seamless" fashion as I had expected.  Did I miss something???  Or is this just the way it is???

    Without knowing what you have tried please open System Preferences - Sharing - File Sharing and select File Sharing. If you still have trouble you can call AppleCare in the morning when they re-open. You have 90 days of telephone support if you haven't already bought AppleCare.

  • Why does my new macbook air keep crashing i.c.w. Time Capsule!!!?

    I bought my new MBA 11" @ the apple store eaton centre in Toronto. Since my purchase i dec 2010 the MBA crashed often but i thought this was normal (once a week).
    Now i connected a brand new Time Capsule & Airport Express (bought @ apple.com) and now it crashes every 30 minutes!!!
    --when i try to copy data to the time capsule it crashes after 1,5 gb.
    --when i'm listening music via Airport Express the MBA crashes after 20 minutes.
    I get a ' filter'  over my screen with in several languages that i need to reboot....
    I tried to get support at Apple (via phone) but the suggested that i should visit iCentre (in Ede, The Netherlands were i live).
    They took my Apple in repair. Got it for over a week and then they told me that the had run some test and that there was nothing wrong... The invoice was euro 79,-!
    ...At home i tried to copy files to my Time Capsule and the machine crashes again.... (nothing wrong???)
    Why can't i get normal support on this expensive machines....!!!???

    Backing up other Ethernet doesn't prevent access via Wi-Fi.
    If the Time Capsule creating a wireless network?  If not, you'll need to configure it to do so in order to allow the MBA to connect to it.  If it does, can you connect the MBA to the Time Capsule's network?
    Depending on the amount of data you want to transfer, using a USB-to-Ethernet adapter would help things run faster.

  • Restoring a time machine backup from an old iMac to new Mac mini

    I am considering purchasing a Mac Mini.  I currently have an iMac (2007) model.  I would like to backup/transfer the apps from one to the other.  Is this possible?  I've been using the time machine function which has been backing up my iMac since day one to an external 1 TByte drive. If I can do this, what all info gets backed up?  Will this also restore my e-mails and documents?  I'm new to restoring on a Mac and want to avoid losing apps and having to reload everything piece meal.  I appreciate any advice.
    Patrick C.

    Actually, you can transfer just about everything via either Target Disk mode or the Time Machine backup database.  The effect would be the same.  The System Installation procedure will ask you if you want to do that.   Alternatively, you can launch Migration Assistant to do that.   It's remarkably complete, including apps and serial numbers and passwords.  A few things need to be done manually afterwards, of course, but not many.
    Keep your iMac around for a few weeks in case something you need turns up later not to have been transferred.
    Unrelated Note: DO NOT try to copy the Time Machine database from one drive to another.  The database is composed of non-ordinary files and the procedure will take weeks.
    --Gil

  • New Macbook does not recognize Time Capsule backup from old macbook

    I just purchased a late 2013 13" macbook pro. I have a mid 2009 macbook pro running Mavericks. The new macbook will not recognize the time capsule backup from my old macbook. I am trying to migrate all data over, but the new mac does not ever acknowledge the external drive that contains the backup. I've tried two different external drives with the same result each time. Both computers are running Mavericks.

    Do you see the drive in Disk Utility?
    If yes, run Repair Permissions then restart the drive.
    1. Open Disk Utility in your Applications/Utility folder.
    2. Click on the First Aid tab and select Repair Permissions
    3. Click on the icon for your boot volume.
    4. Click the repair permissions button.
    In System Preferences > Time Machine can you select the old Time Machine with Select Disk?

  • How should i connect my new macbook air to lcd projector for presentations?

    how should i connect my new macbook air to lcd projector for presentations?

    One of these should work, depending on the projector. Just note both will not allow you to play protected movies on the projector.
    VGA
    http://store.apple.com/us/product/MB572Z/A?mco=MTY3ODQ5OTY
    DVI
    http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY

  • When I attempt to connect my new MacBook Air to my home network I receive a dialogue that says " Could not join name of network .  A connection timeout has occurred.  Any ideas on how to deal with this?

    When I attempt to connect my new MacBook Air to my home network I receive a dialogue that says " Could not join <name of network>.  A connection timeout has occurred.  Any ideas on how to deal with this?

    Please review the following Apple Support article for assistance with troubleshooting wireless connections.
    You may also find this OSXDaily article helpful as well.

  • How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.

    How can I restore files from my old iMac to this new purchased MacBook Air? I am using time machine backup in my old imac.

    Hi,
    Try Target Disk Mode
    OS X Yosemite: Transfer files between two computers using target disk mode
    There is also Migration Assistant.
    OS X Yosemite: Transfer your info from a computer or storage device

  • I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!

    I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!  Further info:  I am a complete newbie to Mac.  Had three macs prior to 2000 then four PCs.  Just come back and struggling a bit with the unfamiliarity. On my old PC laptop I could simply switch from the laptop screen to the large external monitor (and back)  with the F4 function key.  While I can get the background image from my MBA to display, that's it.  Until I noticed on the far left of the external monitor, the very edge of one of the web pages I was on.  So Idragged it over to display in the centre.  But that's all that's there.  And now I have gone out of those web pages but they are still displaying on the monitor.  There is some wierd disconnect.  I'm sure it is just a setting thing.  Will keep searching for answer but any advice welcome!

    Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
    Let me know if this worked for you.

  • I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

    I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

    If you migrated all the info from time machine to your new MBP. The TM will usually ask to connect to the old backups.. sorry I am not sure is this what you want to do.. Personally I think you start a fresh backup.
    BTW Time Capsule does not do anything.. it is a dumb hard disk in a box.. it is TM that does everything.
    Look at B5 and B6 here about connecting to your backup.
    http://pondini.org/TM/Troubleshooting.html

  • How can I use the Time Machine Backups from my Old Computer?

    I have two months of Time Machine backups made using my old Macintosh computer which died and I no longer have. I have now purchased a new computer and am trying to use the Time Machine back ups from the original computer, but it will not recognise them. How can I get my new MacBook Pro to use the Time Machine Backups from my old Computer? I phoned the Apple help line and they said I cannot use them and would have to delete them. This sounds crazy if you can only use the Time Machine back up file with one computer and have to delete it when you buy a new Mac. Surely there must be some way to transfer ownership (not files) from an old to the new Mac?
    Thanks
    Richard

    Thanks Kevin for the suggestion posted on MacOSXHints how to "Repair Time Machine after logic board changes".
    http://www.macosxhints.com/article.php?story=20080128003716101
    It seems as though I am not alone with my frustration with the way Time Machine uses the MAC address of a computer to tell one system from another. This means that if you have your Mac repaired with a new logic board, or replace your system with a new one, you can't resume backups where you left off. Reading through the readers who used the fix using Terminal, it appears that the fix does not always work. I contacted Apple again, but they were no help. Surely Apple should come out with a solution as more and more people use Time Machine/Time Capsule.
    It is CRAZY that after a change computers or a switch in the computer logic board that you cannot resume your Time Machine back ups.

  • How do you back up an external hard drive with time capsule?

    how do you back up an external hard drive with time capsule?

    Will time capsule back up the machine and the hard drive that is plugged into the machine?
    Yes, if the hard drive with the video files is formatted correctly for Mac
    On the Mac with the hard drive connected....click on the Time Machine "clock" icon at the top of the screen
    Click Time Machine Preferences
    Click Options
    Here you will see a list of items that have been excluded from backups
    Click the name of the hard drive to highlight it
    Click the - (minus) button at the bottom of the list to remove the hard drive from the list of excluded items
    The hard drive will now be backed up with your Mac on the next pass that Time Machine makes

  • I had a problem with the hard disk on a 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB and when I tried to erase and format It fails with input/output error. Any help much appreciated!

    I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!

    Zap the PRAM and Reset the SMC, then try again.

  • Can I connect an external hard disk to time capsule? I tried but it doesn't show up. What would be the reason??

    Can I connect an external hard disk to time capsule? I tried but it doesn't show up. What would be the reason??

    The USB drive must be formatted for Mac in Mac OS Extended (Journaled), or if you want to use both Mac and Windows files, the drive can be formatted in FAT32.
    A number of drives are formatted for Windows only in a format called NTFS. This willl not work on the Time Capsule.
    In addition, the USB port on the Time Capsule is under powered. You almost always have to use a powered USB hub when you connect a drive to the Time Capsule...even if the drive has its own power supply.

Maybe you are looking for