Fireworks (cs3) could not run the script

When I choose in adobe dreamweaver: command->create web
photo album fireworks (fw) is launched. The problem is that when fw
is launched I got the following message: "Could not run the script.
The file was not found." So the result is a webpage without
pictures and thumbnails.
What can I do?
Thank you for your answer in advance,
sz.g.

[AM] I wonder if this could be related to your InteliMac?
I'll try and repro the problem you are experiening.
Alan I do believe the problem is directly related to the
IntelMac issue with DW & FW having to run in Rosetta.
Unfortunatly the Adobe document FAQ Adobe Support for
Intel®-based Mac computers
http://www.adobe.com/products/pdfs/intelmacsupport.pdf#search=%22adobe%20studio%208%20not% 20supported%20intel%22.
in the section "Are there any known issues with running Adobe
Creative Suite 2, Studio 8, or After Effects 7.0 under Rosetta?"
doesn't say anything about the Web Photo Album command not working.
I upgraded to Studio 8 in mid August because when I upgraded
to an InteliMac I found that the FTP in my older DW MX application
would crash the application and obviously that would make working
on any websites sort of difficult. So I upgraded to Studio 8 and
everything was running fine (albeit slow at times) until about
three weeks ago now when a web site I was working on for a client
called for Web Photo Album and I discovered this problem.
It also turns out that I happen to like using the JustSo
Photo Album extension but it failed in the same way so it must call
on Fireworks in the same way that Web Photo Album does.
[AM] You could try this Slideshow Creator extension for
Fireworks:
Thanks for that tip. Is the Slideshow Creator your creation?
Unfortunalty I needed a "Photo Album" and not a slide show so I
ended up using Galerie (
http://www.myriad-online.com/en/products/galerie.htm)
but I like the idea of a slideshow too.
I downloaded and tested your Slideshow Creator Extension and
ran a quick test and I like it but for one thing. The album page it
created had all the thumbnail images bunched up in the upper left
hand corner. I don't know whether that was something I did or
failed to do in setting up the output or is it another InteliMac
with Fireworks? I'll have to take another look at it this weekend
when I have some extra time.
Thanks again for the tip.

Similar Messages

Could not run the script. This command requires an active document.

Hi,
I'm receiving a confusing glitch running a batch process in
FW MX 2004.
I want to resize images in one folder and export them to
another. I step through the batch wizard and on commencement of the
batch receive an error:
quote:
Could not run the script. This command requires an active
document.
FW is telling me it can't run the commands on empty
documents, yet the batch is running on all images selected using
Add All during the batch wizard. Confusing. Similar batches have
worked fine in recent days.
Any ideas?
Thx

tkatcher wrote:
> Thank you. Some of them had brackets and percentage
marks.
You are welcome.
E. Michael Brandt
www.divahtml.com
www.divahtml.com/products/scripts_dreamweaver_extensions.php
Standards-compliant scripts and Dreamweaver Extensions
www.valleywebdesigns.com/vwd_Vdw.asp
JustSo PictureWindow
JustSo PhotoAlbum, et alia

Web links in .pdfs inoperable- "Acrob. could not run the browser"

I keep my Adobe Reader updated often, but I've been experiencing a severe inconsistency with the ability to open a (FFox) web page by clicking a link given by the author of any given .pdf., embedded in it. Sometimes it works and opens up the new FFox page OK. But maybe a little more than half the time I first get a security warning, "The document is trying to connect to (URL). If you trust this site, choose 'Allow'. If you do not trust this site, choose 'Block' ". So, I'll click 'allow' and then I get a window saying, "Acrobat could not run the web browser. Unknown error (740).
I've tried to find out more about an error 740, but there's no relation online between any error w/ that # and Adobe. It reads kind of contradictory anyway, since it says "unknown error" but then gives you an error #. Ideas, anyone? Thanks.
(Message was edited by: Victorious57)

I'm having the same problem and have found a few suggestions from different places that may help.
1. Add the site / host to the trusted sites list in Internet explorer. E.G http://hostname or file://hostname or hostname.
2. In Adobe reader or Acrobat go to START>PREFERENCES>JAVA SCRIPT Untick 'enable Acrobat JavaScript'.
3. Create the documents from open office and use the export to PDF option.
The last option seemed to work when adding the hostname to the trusted sites list in IE 8 (IE 6 didn't work)
One thing I noticed when I created PDF's this way is the link was displayed as file://hostname/share/doc.pdf.
When I converted a document from MS Word 2007 and used Acrobat standard to convert the document the link was displayed as file://///host/share.doc.pdf.
I'm not sure why the extra //// were added but it seems that MS word puts the hyperlink in this format.
As I said creating the document in Open Office worked when I added the host in IE 8's trusted site list but this isn't acceptable for me due our SOE restrictions.
Our setup is as follows..
XP Pro SP2
Internet Explorer 6
Adobe Acrobat Standard 9.3

Startup error message - Could not run this script because of a disk error.

I uninstalled Dates-to-iCal-Launcher and couldn't find any info about how to uninstall it online (just dragged the icon from Applications to the Trash). Now every time I start my iBook, I get an error message from Dates-to-iCal Launcher (there is an icon that looks like a scroll on the left):
Could not run this script because of a disk error.
-43
How do I get rid of this error message? It happens every time I turn on the computer. Thank you!

thanks for the update.
there is no risk when changing settings in any OS user interface like System Preferences etc.
there could be some risk in manually deleting files from Library folders, which is done sometimes to uninstall applications.
keep in mind to regularly back up important files.

Fireworks CS4: could not open the file. Unknown file type

Hello, this is the second file created with Fireworks CS4 that can't be opened. I'm using the same Fireworks installation that created the file. The file is a 1.2 MB file containing the pages of a draft for a new website.
When I click on the file in Windows Explorer to open it, Fireworks tries to open it, but it can't. Instead, an alert pops up with this message: "Adobe Fireworks CS4 Could not open the file. Unknown file type"
Working with Windows Vista Business, Adobe Web Premium CS4 suite
I already tried opening the file, to no avail, with:
-another computer with Windows XP Pro SP3 and the same Fireworks version
-another computer with Windows XP Pro SP3 and Fireworks CS3
-another computer with Windows XP Pro SP3 and Fireworks MX 2004
Please help.

I tried to find a solution for you by using:
http://www.adobe.com/cfusion/search/index.cfm?loc=en_us&term=error%20opening%20file&cat=su pport&product=fireworks
but I couldn't find anything. You may want to give it a go :-)
Can you open the file in another program, maybe an earlier version of FWs, or Photoshop or even Illustrator if you have it?
Not sure if there's a configuration folder that needs to be renamed and when FWs restarts it re-writes the config file... that's something to has to be done with DW when 'funny stuff' happens.
That's the best advice I have, I'm sorry :-(
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap

I wanted a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

I want a solution to the problem I was having on Win 7 Pro Service Pack 1 in that links on an open Adobe Acrobat Pro 10.1.12 file will not open in my Firefox Browser 33.0.2. The Error I receive is "Acrobat could not run the web browser. Unknown Error. (123)"

Change browsers. See what happens.
Be well...

Could not run the web browser

I've installed Reader 7.0.9 in order to read ebooks. When I try to activate the mobile device, reader responds with "Acrobat could not run the web browser. Unknown error. (0)". Is there a plug-in missing or corrupted control somewhere. Any suggestions. This is XP SP2 (and SP3) on a Dell Precision.
Any suggestions.

Let me amend my comment. Reader 7 might have been tested with XP SP2,
but with all the changes in the OS due to security changes, OS changes
and browser changes, Reader 8.1.3 or Reader 9 would be a better match to
your software.
Mike

FW CS3 Could not render the database

Hi all.
Anyone come across this one? I keep getting an error message
in FW CS3.
"Could not render the database, Not enough memory".
Now, when this started I had a number of apps running so I
closed them all down except for FW and the problem remained. So,
next I re-booted and have only FW CS3 running and when I open up
the .png file to edit it I still get this error. I have never seen
this with FW 8 however I have run into similar problems when
running PS CS3/Bridge.
My system is a P4 duo core jigger with 2GB RAM and plenty of
spare space on the HDDs. I have my Paging file set to a min of 3GB
and a max of 4GB across two partitions.
Thanks.

WollombiWombat wrote:
> Update to above. The image concerned has a Selective JPG
Mask on it. I wanted
> to edit some text that is outside the mask and thats
when I get this error
> which prevents me from doing anything with FW. I am
forced to kill it with the
> Windows Task Manager.
> Sounds like a Bug.....
>
I have had this with FW8 - it turned out it was a faulty font
- try the
same image with a different font and see if that works.
HTH
chin chin
Sinclair

Securely deploying and using credentials within a script (not running the script under the credentials)

Here is my scenario - I have SCOM 2007 R2 and on certain agents I want to execute a script. One of the actions of that script is to access a secured web page using a username and password via integrated authentication (IE pop-up for auth).
The username and password that I need to use are unrelated to the Windows domain that the servers run in, meaning you can think of the website as if it were a public site (it isn't, but it has no security sharing with the domain where the agents run - no trust,
no nothing).
I can easily accomplish this by hard-coding the username and password within the script (powershell), however, I don't want to do this for security reasons. Here's a rough example of the relevant code:
$targetURL = "https://somehost.somewhere.something/filename.zip"
$path = "c:\downloads\filname.zip"
$wclient = New-Object System.Net.WebClient
$wclient.Credentials = New-Object System.Net.Networkcredential($uname, $pword)
$wclient.DownloadFile( $url, $path )
What I want is a way to pass the $uname and $pword variables to this script securely, with the script running on a schedule under SCOM. The SCOM agents run as localsystem and need to remain that way.
I currently use Run-As accounts and profiles for other functions where the entire script runs under the run-as profile, but I can't figure out how to extract the username and passwords, and doubt it's even possible.
To be clear, I cannot run the script under the given credentials as a Run-As account as those credentials are not known to the local server. I need to somehow pass the credentials to the script (other than hardcoding) or extract them from the run-as accounts.
I've looked at the get-runasaccount cmdlet and can see some of the info there, but don't see a way to re-use, pass-through, or extract the password for use in my scenario.
Any guidance? Can I get there from here?

Hi, check this
http://social.technet.microsoft.com/Forums/windowsserver/en-US/ebfc706d-93be-4ca0-83e0-33d9e072fb97/powershell-script-monitor-with-encrypted-password?forum=operationsmanagerauthoring
But you should not specify runas account for your workflow, just reference Runas Username and Password from Profile and use simple authentication. (The same way as in article above)
So in the end your script will be executed by default action account but you'll pass username and password securely to your script.

Could not run the bookstore1 example from the Java Web Services Tutorial

The bookstore1 servlets example from the Java Web Services Tutorial (issue Aug 1, 2002) was built and deployed successfully by using the deploytool (following the steps described on pages 498ff of the tutorial).
After deploying the application the Tomcat Web Application Manager shows the entry:
/bookstore1:stopped:0:D:\Programme\Java\tomcat\jakarta-tomcat-4.1.8\work\Standalone\localhost\manager\bookstore1.war
when entering the command: http://localhost:8080/manager/list.
After entering the command: http://localhost:8080/manager/start?path=/bookstore1, the (uncomplete) message appears:
FAIL - Application at context path /bookstore1 could not
It should be noted that I was able to build and deploy the application GSApp (chapter 3 of the tutorial) successfully.

Did you set up the database as described in
http://java.sun.com/webservices/docs/1.0/tutorial/doc/WebApp13.html#69868

Have terminal NOT run a script when it loads

I recently wrote a basic shell script and saved it as a .command file to run from the desktop. Since then, whenever I open the terminal it automatically runs the script then exits the terminal. If I hide the file (mv pt-noplugs.command .ptnoplugs.command) it simply opens the terminal and closes it immediately. I have tried changing the default shell from bash to something else but this doesn't seem to make a difference. I also don't seem to have a .bashrc file when it normally is /home/user/.bashrc (I'm used to linux). Any help would be appreciated. Below is the script:
# Shell Script to start Pro Tools HD with no waveshell Plug-In
echo "*"
echo "* Script: pt-noplugs.command"
echo "* Please Leave This Window Open Until ProTools Has Exited"
echo "*"
# Move waveshell Plug-In Files to Plug-Ins (Unused)
cd "/Library/Application Support/Digidesign/Plug-Ins/"
mv -v Waveshell-DAE_5.9.1.dpm "../Plug-Ins (Unused)"
# Start Pro-Tools
/Applications/Digidesign/Pro\ Tools/Pro\ Tools\ HD.app/Contents/MacOS/Pro\ Tools\ HD
# Restore Plug-Ins directory
cd "../Plug-Ins (Unused)"
mv Waveshell-DAE_5.9.1.dpm ../Plug-Ins
echo "*"
echo "* Thank You. This Window May Now Be Closed"
echo "*"
exit

I forgot to add: when I login as a different user and load terminal is does NOT run the script mentioned before.

9ias setup exe could not run

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name : download.oracle.com...
- Filename
- Date/Time : 27,28 August 2002
- Browser + Version : Internet explorer 6.0
- O/S + Version : Windows XP 2002
Hi,
-After downloading and unzipping 9ias i could not run
the setup.exe
my computer has pentium 4
i know there is aproblem with p4 and universal installer
but what is the exact solution ?
-I' am also wondering if there is a sertification with windows XP or not
to not to waste my time
Could anyone help me with this
Waiting for a reply
thanks !

Hi,
Please right click the setup.exe and choose run as administrator.
Sometime, it may be caused by missing or corrupted system files, run SFC.
Start>click cmd in the search box>type SFC/scannow.
And sometimes other software, especially security type programs, can interfere with your installations.
Test in Safe mode to see if the issue persists.
Restart the computer, press F8 before the windows logo appears.
If still cannot install, test with install .exe file in another computer. If the same issue, the issue may be the setup file itself. If can install in another computer, it may be the issue of the windows installer.
Follow the steps in the kb to troubleshoot the issue.
How to troubleshoot issues with Windows installer service
http://support.microsoft.com/kb/2438651/en-us
Regards,
Ada Liu
TechNet Community Support

Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?

Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week.

Could not initialize the application's security ... Tried renaming cert8.db and secmod.db. Profile has r/w access. Still get message. Can only run as admin

Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
Above error messa4bite occurs whenever I star Firefox without admin priv. Checked the profile directory listed in troubleshoot info -- has r/w access for system, admin and self Tried renaming cert8 and secmod as suggested in one forum response. Problem persists.\
My computer runs Win 7 Home Premium 64bit

If deleting or otherwise removing the cert8.db and secmod.db file doesn't help then try a new profile.
*https://support.mozilla.org/kb/Could+not+initialize+the+browser+security+component
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

Fireworks (cs3) could not run the script

Similar Messages

Maybe you are looking for