Adding data into a custom table through a report transaction
Is it possible to add data into a table through a report transaction. I have been asked to create a report in which when we add certain data in the selkection screen it updates thoses particular fields and the rest of the records can be fille dout in the output. Basically I have a customised allocation table called zalloc. I have to create a report with selection screen having receiving plant, material document of the original transfer psoting , issuning plant , line item number , batch, receiving and issuning storage location. I need to validate this against the mseg table and whatever entry I make in teh selection screen should update my zalloc table from here.
Can anyone help me with this please.
Thanks
Hi Aarav,
Yes, It is possible to add records to a table using a report transaction. You can use Update or Modify to insert records in a table.Convert the data fetched from the ZALLOC and convert it into an internal table of the same format as that of the ZALLOC table and simply do an
loop at itab_zalloc into wa_zalloc.
*INSERT INTO ZALLOC FROM WA_zalloc*.
endloop.
OR
INSERT ZALLOC FROM TABLE ITAB_ZALLOC
OR
UPDATE ZALLOC FROM TABLE ITAB__ZALLOC .
Update will modify if that record exist and returns sy-subrc as non zero if entry does not exist.
OR
MODIFY updates an existing DB entry or, in no matching entry exists, inserts a new entry into the DB table
Similar Messages
-
Urgent help needed in inserting data into a custom table in oracle WorkFlow
Hi
I am trying to get data from the WF and insert into a custom table..
I read that workflow procedures WONT allow commits...
Oracle Workflow will not support autonomous commits in any procedure it calls directly. If you need to perform commits, then embed your SQL in a subprocedure and declare it as an autonomous block. This subprocedure must be capable of being rerun. Additionally, note that Oracle Workflow handles errors by rolling back the entire procedure and setting its status to ERROR. Database updates performed by autonomous commits cannot be rolled back, so you will need to write your own compensatory logic for error handling
Have anyone did this..
Please give me some idea ...It is urgent
I am getting data using getitemattribute..and try to insert it into a custom table
thanks
kpPl do not post duplicate threads - insert dont work in Workflow
Srini -
Update real time account general data into a custom table
Hi,
I have created a z table for storing account general data for some business requirement. I have created a program and executing batch job to update this z table on periodic basis. Can anyone suggest some other alternative solution to update this z table whenever an account gets created/modified in CRM system? Instead of running a batch job periodically, I need a real time replication of the account data in this custom table.
Thanks and Regards,
Sneha.Hi,
Thanks for your reply.
But, Can you elaborate the solution, Can we use Business Transaction Events(BTEs) for updating Partner data? Will these be triggered for Account Creation/Modification. If so, Can u suggest any BTE which can be used for my requirement?
Thanks and Regards,
Sneha. -
How to fetch data into my custom script configured in qc02 transaction
Hi All,
I configured the custom SAP-Script in place of standard script name in QC02 tcode.In my requirement when I execute QC22
transaction the custom script will be triggered along with some data based on material number,batch number and plant.I need to fetch QALS-KTEXTMAT , QALS-CHARG, MCH1-HSDAT and MCH1-VFDAT.Please help me how to fetch this data.Any Enahancement need to use or any spot is there Please specify.
Thanks in advance.
Regards,
Satya.
Edited by: satyareddygade on Sep 8, 2011 2:13 PMHi Satya,
Try like this in your Script window text element.
/: PERFORM FETCH_KTEXTMAT IN PROGRAM <Z Subroutine Pool program>
/: USING &QALS-PRUEFLOS&
/: CHANGING &GV_KTEXTMAT&
/: ENDPERFORM
in Z Subroutine Pool program
FORM fetch_ktextmat TABLES intab STRUCTURE itcsy
outtab STRUCTURE itcsy.
DATA:
lv_prueflos TYPE qals-prueflos,
lv_ktextmat TYPE qals-ktextmat.
*---Get Inspection Lot Number
READ TABLE intab WITH KEY 'QALS-PRUEFLOS'.
CHECK sy-subrc = 0.
lv_prueflos = intab-value.
SELECT SINGLE ktextmat FROM qals INTO lv_ktextmat WHERE prueflos EQ lv_prueflos.
outtab-value = lv_ktextmat.
MODIFY outtab FROM outtab TRANSPORTING value WHERE
name = 'GV_KTEXTMAT'.
CLEAR : intab,outtab.
ENDFORM. "FETCH_KTEXTMAT
/: PERFORM FETCH_HSDAT IN PROGRAM <Z Subroutine Pool program>
/: USING &*VBDPL-MATNR&
/: USING &VBDPL-CHARG&
/: CHANGING &GV_HSDAT&
FORM fetch_hsdat TABLES intab STRUCTURE itcsy
outtab STRUCTURE itcsy.
DATA:
lv_matnr TYPE vbdpl-matnr,
lv_charg TYPE vbdpl-charg,
lv_hsdat TYPE mch1-hsdat.
*---Get Material Number
READ TABLE intab WITH KEY '*VBDPL-MATNR'.
CHECK sy-subrc = 0.
lv_matnr = intab-value.
*---Get Batch Number
READ TABLE intab WITH KEY 'VBDPL-CHARG'.
CHECK sy-subrc = 0.
lv_charg = intab-value.
SELECT SINGLE hsdat FROM mch1 INTO lv_hsdat WHERE matnr EQ lv_matnr
AND charg EQ lv_charg.
outtab-value = lv_hsdat.
MODIFY outtab FROM outtab TRANSPORTING value WHERE
name = 'GV_HSDAT'.
CLEAR : intab,outtab.
ENDFORM. "FETCH_HSDAT
Use the following program symbols where you want to print.
&GV_KTEXTMAT& &QALS-CHARG& &GV_HSDAT& and &MCH1-VFDAT&
Regards,
Surya. -
Custom PL/SQL API that inserts the data into a custom interface table.
We are developing a custom Web ADI integrator for importing suppliers into Oracle.
The Web ADI interface is a custom PL/SQL API that inserts the data into a custom interface table. We have defined the content, uploader and an importer. The importer is again a custom PL/SQL API that will process the records inserted into the custom table and updates the STATUS column of the custom interface table. We want to show the status column back on the spreadsheet.
Defined the 'Document Row' import rule and added the rows that would identify the unique record.
Errored row import rule, we are using a SELECT * from custom_table where status<>'Success' and vendor_name=$param$.vendor_name
The source of this parameter is import.vendor_name
We have also defined an Error lookup.
After the above setup is completed, we invoke the create document and click on Oracle->Upload.
The records are getting imported, but the importer program is failing with An error has occurred while running an API import. The ERRORED_ROWS step 20003:ER_500141, parameter number 1 must contain the value BIND in attribute 1.'The same issue.
Need help.
Also checked bne.log, no additional information.
<bne:document xmlns:bne="http://www.oracle.com/bne">
<bne:message bne:type="DATA" bne:text="BNE_VALID_ROW_COUNT" bne:value="11" />
<bne:message bne:type="DATA" bne:text="BNE_INVALID_ROW_COUNT" bne:value="0" />
<bne:message bne:type="ERROR" bne:text="An error has occurred while running an API import"
bne:cause="The ERRORED_ROWS step 20003:ER_500165, parameter number 1 must contain the value BIND in attribute 1."
bne:action="" bne:source="BneAPIImporter" >
<bne:context bne:collection="collection_1" />
</bne:message><bne:message bne:type="STATUS"
bne:text="No rows uploaded" bne:value="" >
<bne:context bne:collection="collection_1" /></bne:message>
<bne:message bne:type="STATUS" bne:text="0 rows were invalid" bne:value="" >
<bne:context bne:collection="collection_1" /></bne:message></bne:document> -
Data from a file need to be read and mapped into a custom table of R/3
Hello all,
This is related to inbound to SAP ECC via SAP PI.
There is a requirement concerning PI part that data from a file need to be read and mapped into a custom table of R/3.
To have this scenario developed , do we have any other option than the Proxy ?
My understanding is as follows : File --> SAP PI --> Proxy
You suggestions are welcome.
Regards,
RachanaHi Ravi,
As suggested by Inaki, you can use proxy communication in recever.
but you can also use the below
FILE -----> PI -------> PROXY
RFC
IDOC
to communicate to ECC system.
Regards
srinivas -
Writing a stored procedure to import SQL Server table data into a Oracle table
Hello,
As a new DBA I have been tasked with writing a stored procedure to import SQL Server table data into an Oracle table. I have been given many suggestions on how to do it from SQL Server but I I just need to write a stored procedure to run it from the Oracle side. Suggestions/guidance on where to start would be greatly appreciated! Thank you!
I started to write it based on what I have but I know this is not correct :/
# Here is the select statement for the data source in SQL Server...
SELECT COMPANY
,CUSTOMER
,TRANS_TYPE
,INVOICE
,TRANS_DATE
,STATUS
,TRAN_AMT
,CREDIT_AMT
,APPLD_AMT
,ADJ_AMT
,TRANS_USER1
,PROCESS_LEVEL
,DESCRIPTION
,DUE_DATE
,OUR_DATE
,OUR_TIME
,PROCESS_FLAG
,ERROR_DESCRIPTION
FROM data_source_table_name
#It loads data into the table in Oracle....
Insert into oracle_destination_table_name (
COMPANY,
CUSTOMER,
TRANS_TYPE,
INVOICE,
TRANS_DATE,
STATUS,
TRANS_AMT,
CREDIT_AMT,
APPLD_AMT,
ADJ_AMT,
TRANS_USER1,
PROCESS_LEVEL,
DESCRIPTION,
DUE_DATE,
OUR_DATE,
OUR_TIME,
PROCESS_FLAG,
ERROR_DESCRIPTION)
END;CREATE TABLE statements would have been better as MS-SQL and Oracle don't have the same data types.
OUR_DATE, OUR_TIME will (most likely) be ONE column in Oracle.
DATABASE LINK
Personally, I'd just load the data over a database link:
insert into oracle_destination_table_name ( <column list> )
select ... <transform data here>
from data_source_table@mssql_db_link
As far as creating the database link from Oracle to MS-SQL ... that is for somebody else to answer.
(most likely you'll need to use an ODBC driver)
EXTERNAL TABLE
If the data from MS-SQL is in a CSV file, just use and external table.
same concept:
insert into oracle_destination_table_name ( <column list> )
select ... <transform data here>
from data_source_external_table
MK -
Urgent:-Values are not inserted into the custom table
Hi, I am inserting the data from the custom OAF form into a custom table. Only the WHO columns are populated into the table but no field value is populated into the custom table. I have written the following code -
In CO
if (pageContext.getParameter("Continue") != null)
OAApplicationModule am = pageContext.getRootApplicationModule();
OAViewObject CwkInfo = (OAViewObject)am.findViewObject("CWKInfoVO1");
am.invokeMethod("initializevo");
in AM
public void initializevo()
CWKInfoVOImpl testVo = (CWKInfoVOImpl) this.getCWKInfoVO1();
testVo.insertRow(testVo.createRow());
getTransaction().commit();
Urgent Help is required.
Regards,
AshishHi Ashish,
Double check whether you have attached the correct EO based VO attribute to the columns.
In the Controller
Process Request use the following code:-
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (!pageContext.isFormSubmission())
am.invokeMethod("initQuery", null);
ProcessForm Request
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
System.out.println("Inside Process Form Request");
super.processFormRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
if (pageContext.getParameter("submitButton")!=null)
am.invokeMethod("submit")
AM Code
public void initQuery()
OAViewObject vvo = (OAViewObject)getEmployeeEOVO1();//Give you EO based VO Name
if (!vvo.isPreparedForExecution())
vvo.executeQuery();
Row row = vvo.createRow();
vvo.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
public void submit()
getTransaction().commit();
Import necessage classes.
Thanks
--Anil -
Problem in Insertion into table through After Report Parameter form trigger
Hi All,
I am getting problem in inserting some data into temp table through Report.
My requirement is like that, I have to do a calculation based on user parameters, and then insert the data into the temp table. I wanted to do this into After Report Parameter form trigger function. I have done all the calculation and wrote all the insert statement in that function. There is no problem in compilation. then I am taking value from this temp table in my formula columns.
When I run this report, it hangs, don't understand what is the problem.Can anybody help me out in this.
Thanks,
NidhiThe code is as follows:
function AfterPForm return boolean is
CURSOR CUR_RECEIPT(RECEIPT_NUM_FROM NUMBER, RECEIPT_NUM_TO NUMBER) IS
SELECT DISTINCT receipt, item_no FROM xxeeg.xxeeg_1229_sp_putaway WHERE RECEIPT BETWEEN
RECEIPT_NUM_FROM AND RECEIPT_NUM_TO ;
V_CUR_RECEIPT CUR_RECEIPT%ROWTYPE;
begin
OPEN CUR_RECEIPT(:RECEIPT_NUM_FROM, :RECEIPT_NUM_TO);
FETCH CUR_RECEIPT
INTO V_CUR_RECEIPT;
LOOP
EXIT WHEN CUR_RECEIPT%NOTFOUND;
IF V_CUR_RECEIPT.ITEM_NO = 'TEST1' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 12
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 13
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 14
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
IF V_CUR_RECEIPT.ITEM_NO = 'TEST2' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 16
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 17
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 18
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 19
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 20
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 21
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
END IF;
END IF;
END LOOP;
COMMIT;
CLOSE CUR_RECEIPT;
return(TRUE);
end;
..................................................................................................................... -
Import Excel File Data into oracle database table.
HI,
i want to insert data into a specific table from a excel file. please help me..
for example
emp.xls file's data need to be import in emp database table.
thanks in advance...Hi,
to all knowledgable person, this would be gald for u all that i have solved the problem.
through this procedure..
PROCEDURE IMPORT_FROM_EXCEL_PROC (as_FileName VARCHAR2, exe_name varchar2) IS
appid PLS_INTEGER;
convid PLS_INTEGER;
docid PLS_INTEGER;
conv_established BOOLEAN := FALSE;
buffer VARCHAR2(100);
Emp_code VARCHAR2(100);
Emp_name VARCHAR2(100);
Emp_desig VARCHAR2(100);
Emp_Salary VARCHAR2(100);
ls_error VARCHAR2(1000);
li_row integer;
li_col integer;
li_error_count integer;
li_load_count integer;
BEGIN
--Start Excel
--This line assumes that Excel is in the specified directory
-- APPID := DDE.APP_BEGIN('D:\OFFICE11\EXCEL.EXE',DDE.APP_MODE_MINIMIZED);
APPID := DDE.APP_BEGIN(exe_name,DDE.APP_MODE_MINIMIZED);
--Establish a conversation with Excel
--The following loop will not end until a conversation with Excel
--has been established. Therefore, it can result in a endless loop,
--so use with caution.
WHILE NOT conv_established LOOP
BEGIN
convid := DDE.INITIATE('excel', 'system');
conv_established := TRUE;
EXCEPTION
WHEN DDE.DMLERR_NO_CONV_ESTABLISHED THEN
conv_established := FALSE;
END;
END LOOP;
--Open Excel document
--This assumes that you have an Excel spreadsheet named ddetest.xls in the root of c:
DDE.EXECUTE(convid, '[Open("'||as_FileName||'")]', 10000);
--Initiate conversation with Excel document
docid := DDE.INITIATE('excel',as_FileName);
--Begin transfer from Excel to Forms
li_load_count := 0;
li_error_count := 0;
li_col := 1;
li_row := 2;
GO_BLOCK('IMPORT_XLS');
DDE.REQUEST (docid, 'R' || TO_CHAR(li_row) || 'C' || TO_CHAR(li_col), buffer, DDE.CF_TEXT, 1000);
WHILE length(buffer) > 2 LOOP
WHILE li_col < 5 LOOP
buffer := substr(buffer, 1, instr(buffer, chr(10)) - 2);
IF li_col = 1 THEN --Emp_code
Emp_code := buffer;
ELSIF li_col = 2 THEN --Emp_name
Emp_name := buffer;
ELSIF li_col = 3 THEN --Emp_desig
Emp_desig := buffer;
ELSE --Emp_salary
Emp_salary := buffer;
END IF;
IF nvl(ls_error,'N') = 'N' THEN
li_col := li_col + 1;
DDE.REQUEST (docid, 'R' || TO_CHAR(li_row) || 'C' || TO_CHAR(li_col), buffer, DDE.CF_TEXT, 1000);
ELSE
li_col := 5;
END IF;
END LOOP;
IF nvl(ls_error, 'N') = 'N' THEN
li_load_count := li_load_count + 1;
IF li_load_count = 1 THEN
FIRST_RECORD;
ELSE
NEXT_RECORD;
END IF;
:IMPORT_XLS.Emp_code := Emp_code;
:IMPORT_XLS.Emp_name := Emp_name;
:IMPORT_XLS.Emp_desig := Emp_desig;
:IMPORT_XLS.Emp_salary := Emp_salary;
ELSE
li_error_count := li_error_count + 1;
DDE.POKE(docid, 'R' || TO_CHAR(li_row) || 'C5', ls_error, DDE.CF_TEXT, 10000);
END IF;
ls_error := '';
Emp_code := '';
Emp_name := '';
Emp_desig := '';
Emp_salary := '';
li_col := 1;
li_row := li_row + 1;
DDE.REQUEST (docid, 'R' || TO_CHAR(li_row) || 'C' || TO_CHAR(li_col), buffer, DDE.CF_TEXT, 1000);
END LOOP;
IF li_error_count > 0 THEN
DDE.EXECUTE(convid, '[[save]]', 10000);
Message(TO_CHAR(li_load_count) || ' Record(s) Loaded. ' ||
TO_CHAR(li_error_count) || ' Invalid Record(s). See error in excel file.');
ELSE
Message(TO_CHAR(li_load_count) || ' Record(s) Successfully Loaded.');
END IF;
--End transfer to Excel
DDE.TERMINATE(docid);
DDE.TERMINATE(convid);
DDE.APP_END(appid);
--Handle exceptions
EXCEPTION
WHEN DDE.DDE_APP_FAILURE THEN
MESSAGE('WINDOWS APPLICATION CANNOT START.');
WHEN DDE.DDE_PARAM_ERR THEN
MESSAGE('A NULL VALUE WAS PASSED TO DDE');
WHEN DDE.DMLERR_NO_CONV_ESTABLISHED THEN
MESSAGE('DDE CANNOT ESTABLISH A CONVERSATION');
WHEN DDE.DMLERR_NOTPROCESSED THEN
MESSAGE('A TRANSACTION FAILED');
END; -
Can anyone confirm the date used for pushing the data into AR interface table? Is it abse don Actual ship date or scheduled ship date? We are facing a scenario where trx date is lower than the actual ship to which logically sounds incorrect.
Appreciate any quick response around this.Hi,
Transaction date will be your autoinvoice master program submission level date (If you haven't setup any logic.
Please check the program level default date, if user enter old date ststem will pick the same.
Customer is trying to set the value of the profile OM:Set receivables transaction date as current date for non-shippable lines at the responsiblity level. System does not set the transaction date to current date in ra_interface_lines_all.
CAUSE
Customer has used the functionality in R11i. But after the upgrade to R12, the system functions differently than R11i.
SOLUTION
1.Ensure that there are no scheduled workflow background process run.
2.Set the profile "OM: Set Receivables Transaction Date as Current Date for Non-Shippable Lines" at Responsibility level only as Yes.
3.Now switch the responsibility to which the profile is set.
4.Create order for Non-Shippable Lines and progress it to invoicing.
5.Ensure that the 'workflow background process' concurrent program is run in the same responsibility and this line is considered in it.
6.Now check if the 'SHIP_DATE_ACTUAL' is populated to ra_interface_lines_all -
Storing the output of a function module into a custom table
Hi Gurus,
Is it possible to store the output of a function module into a custom table.How can this be done?Is it complex?hi,
After u execute the FM and get values in the internal table ITAB_RESULT. Create a custom table having structure same as ITAB_RESULT call it ZRESULT.
data :wa type ITAB_RESULT.
call FM and get result it ITAB_RESULT
loop at itab_result.
move-corresponding itab_result to wa.
insert wa to ZRESULT.
endloop.
Regards,
Mansi. -
How to insert data into the mysql table by giving as a text file
Hi,
Any one know's how to insert data into the mysql table by giving as a text file as the input in JSP.Please respond ASAP.
Thanks:)At least you can try StringTokenizer to parse your text files. Or download a text JDBC driver to parse your files, for instance, HXTT Text(www.hxtt.net) or StelsCSV(www.csv-jdbc.com).
-
Can i use one interface to load data into 2 different tables
Hi Folks,
Can i use one interface to load data into 2 different tables(same schema or different schemas) from one source table with same structure ?
Please give me advice
Thanks
Raj
Edited by: user11410176 on Oct 21, 2009 9:55 AMHi Lucky,
Thanks for your reply,
What iam trying is ...Iam trying to load the data from legacy tables(3) into oracle staging tables.But i need to load the same source data into two staging tables(these staging tables are in two different schemas)
can i load this source data into two staging tables by using single standard interface(some business logic is there)
If i can then give me some suggestion how to do that
Thanks in advance
Raj -
How to read a table and transfer the data into an internal table?
Hello,
I try to read all the data from a table (all attribute values from a node) and to write these data into an internal table. Any idea how to do this?
Thanks for any help.Hi,
Check this code.
Here i creates context one node i.e flights and attributes are from SFLIGHT table.
DATA: lo_nd_flights TYPE REF TO if_wd_context_node,
lo_el_flights TYPE REF TO if_wd_context_element,
ls_flights TYPE if_main=>element_flights,
it_flights type if_main=>elements_flights.
navigate from <CONTEXT> to <FLIGHTS> via lead selection
lo_nd_flights = wd_context->get_child_node( 'FLIGHTS' ).
CALL METHOD LO_ND_FLIGHTS->GET_STATIC_ATTRIBUTES_TABLE
IMPORTING
TABLE = it_flights.
now the table data will be in internal table it_flights.
Maybe you are looking for
-
Videos not showing on iPad using Muse CC
I have created a website that uses two different videos, they work fine on the desktop version but do not show up on the Tablet version. I'm testing on an iPad but pretty sure it will be the same result for other tablets. They will also have to work
-
IPhone home video slow on Apple TV. Fix or workaround?
Sorry to say I'm very disappointed short videos recorded on our iPhones are very slow to load to Apple TV and play on actual TV. I've read this is, generally speaking, the norm and you simply have to wait for it to load. Maybe we're naive but we just
-
Trim up to a certain character
hi everyone, i hope someone can help me with this. i have a string that I need to trim up to a pipe character ("|"). the problem is, the length of the characters before this pipe character varies greatly. How can I trim the string (for example, abcde
-
Captivate 4 will not load up.
Hello, I have just installed captivate 4 and everytime I try to load it up, it does not load. Gives me the green Captivate screen then shuts down. I have reinstalled flash. It is Flash Player 10. I am not sure what to do can someone help. I am on win
-
Plant Maintenance-- Regarding Scrapping Of Equipments
Hi Gurus, My client wants to scrap many Equipments. The Equipments are Calibration Equipments and Machines. I want to know how to scrap equipments with proper accounting Entries. How to do that. Can anyone Guide me Calibration Equipments are Maintain