First create the valuation-type-independent data in LSMW for MM

Hello All,
I have uploaded MM FHMI using LSMW except accounting view.
I am trying to upload Accounting view separately and got an error "First create the valuation-type-independent data"
I am using Tcode= MM01.
What to do now?
Regards,
Jyothishree C P

Hi all,
I'm using BAPI_MATERIAL_SAVEDATA for opening all views of material. I I try to open COST and ACCOUNT views, still having same message error "First create the valuation-type-independent data".
Also If I don't open ACCOUNT and COST views, the creation works fine. After in updating material, I set up the VALUATIONDATA / X structure but the error is the same.
We use "split valuation on material" and the Valuation Type is a mandatory field.
Any help?
Thanks in advance.
GB

Similar Messages

Error:First create the valuation-type-independent data:BAPI MM

Hello all,
I am getting above error (First create the valuation-type-independent data) when i sent the BWTAR field to BAPI_MATERIAL_GET_ALL and material data is not getting fetched.
Please guide to resolve the issue.
Thank you.
Edited by: sanjivrd on Nov 30, 2009 10:08 AM

Hi all,
I'm using BAPI_MATERIAL_SAVEDATA for opening all views of material. I I try to open COST and ACCOUNT views, still having same message error "First create the valuation-type-independent data".
Also If I don't open ACCOUNT and COST views, the creation works fine. After in updating material, I set up the VALUATIONDATA / X structure but the error is the same.
We use "split valuation on material" and the Valuation Type is a mandatory field.
Any help?
Thanks in advance.
GB

How can we change the valuation type for a material created.

How can we change the valuation type for a material created.
Note : All open orders are closed for this material.3
Please guide

Hi,
You can change valuation class, or you can set valuation category for your material master. If valuation category is set you can extend your material master and in this way creating records for different valuation types.
Please try to set the desired changes in your mmr (MM02) > save > SAP will give you error message > push 'Display error' button and you will see what conditions must be eliminated to carry out the change.
- you are not allowed to have open transactional data
- no stock in the current and previous period (using proper posting date in MB1A + 201 you can reduce your stock level to 0, and after that you can set it back by MB1A + 202)
- in case of valuation category setting batch archiving may be necessary
BR
Csaba

How to create a line type in data dictionary

How to create a line type in data dictionary?Please explain step by step?
Thanks & Regads,
Sairam

Hi,
the details abbout the line type.
The line type of a table type can be defined by:
o Specification of a type that already exists (data element,
structure, table type, table, view) whose properties are then copie
as properties of the defined table line.
o Direct type input, where data type, number of positions, and, if
required, decimal places, are entered directly.
o Specification of a reference type.
and SE11 and click on datatype and click on table type and enter the line type.
Thanks
Shiva

How to create the sub type field in hr abap infotype

hi ,
how to create the sub type field in hr abap infotype.
regards,
venkat.

Try like this also
creating of infotype please follow these steps ...
Step 1: Create Infotypes
i. Goto Transaction PM01 To create Infotypes:
ii. Enter the Infotype Number and say create all.
iii. The following message would display:
i. PSnnnn Does not exist. How do you want to proceed?
iv. Click
v. A maintain Structure screen appears.
Fill in the short text description and the PS structure of the Infotype.
Since the fields Personnel No, Employee Begin Date, End Date, Sequential Number,Date of Last Change, Name of user who changed the object are available in the PAKEY and PSHD1 structure, define the PSnnnn structure with only the fields you required.
vi. Once the PS Structure is created, save and activate the structure.
vii. In the initial screen of PM01, now click on .
Create a new entry for the infotype.
Fill in the values as mentioned below and save.
Infotype Characteristics:
Infotype Name of the infotype_ Short Text: __Short Description________
*General Attributes :
Time constraint = 1
Check Subtype Obligatory
Display and Selection:
Select w/ start = 3 Valid record for entered data
Select w/ end = 5 Records with valid dates within the period entered
Select w/o date = 6 Read all records
Screen header = 02 Header ID
Create w/o end = 1 Default value is 31.12.9999
Technical Data:
Single screen = 2000
List screen = 3000; List Entry Checked.
viii. In the initial screen of PM01, now click on .
Choose the infotype entry in the list.
Fill in the values as mentioned below and save.
Technical Attributes:
In tab section,
The following attribute values are given:
Applicant DB Tab = PAnnnn Infotype Name
Subtype field = SUBTY
Subtype table = T591A
Subty.text tab. = T591S
Time cnstr.tab. = T591A
Prim. /Sec. = I Infotype
Period/key date = I Interval
and .
ix. Infotype Screen Modification:
Edit Screen 2000 from PM01 for the Infotype.
ABAP Editor for the Infotype Program MPnnnn00 will be displayed.
Click . Flow Logic will be displayed. There string coding of your own logic.
Regards
Pavan

Deriving the valuation type of a product automatically from raw material

Hello everyone,
I want to know if it is possible to make it such that a product gets its valuation type automatically according to the valuation type of the raw materials that go into its production. For instance:
Say, I have a product P1001, to produce 1 PC of which takes 3 KG of raw material R1001. P1001 has the valuation types PRD01 and PRD02 assigned, while R1001 has RAW01 and RAW02. I want P1001 to have PRD01 when the R1001 used for it has RAW01, but PRD02 when RAW02.
Is this at all possible? I was thinking maybe product cost collectors, production versions and BOMs could somehow be used for a workaround; except there is no apparent connection to valuation types in any of these.
Thanks in advance.

Hi,
Generally MRP consider stock from all the storage location when run the MRP for Plant level for material.
However we can exclude the particular storage location from MRP Run, for those following settings to be done.
Go to MRP-2 View of material master and select the storage location to be excluded from MRP. (Press Shift +f1 ex .sloc2) As per your case it should be RMSL
In that MRP view go to Storage location MRP Tab.
And assign u201CSLoc MRP indicator = 1 (Storage location stock excluded from MRP)u201Dand save.
Now run the MRP, stock from sloc2 will not be considered to create-planned order.
Please try this and revert back.
Cheers,
Kumar.S

RDS 2012 The WinRM service failed to create the following SPNs: Additional Data The error received was 1355

Hi,
I have RDS 2012 session deployment in Azure with connection broker high availability.
The "Remote Desktop Management" service does not start automatically when the connection broker virtual machines are stopped and started.
I see the below error in event logs of both the connection broker VMs
Note: WHen i manually start the "Remote Desktop Management" service after this error, it all works without issues.
I get
Error ID 46 - Crash dump initialization failed!
Warning 10154 - in Microsoft-Windows-Windows Remote Management
The WinRM service failed to create the following SPNs:
Additional Data
The error received was 1355

Hi,
Thank you for posting in Windows Server Forum.
In respect to error 46, this issue may occur if the computer boots without a configured dump file. The default dump file is the pagefile. During a clean Windows OS installation, the very first boot will hit this condition as the pagefile has not been set up
yet.
To resolve this issue, you may want complete the paging file configuration.
More information:
Event ID 46 logged when you start a computer
http://support.microsoft.com/kb/2756313/EN-US
In regards to error 10154, you need to create the SPN specified in the event using the
setspn.exe utility and also need to grant the “Validated Write to Service Principal Name” permission to the NETWORK SERVICE.
For more information refer beneath articles.
Event ID 10154 — Configuration
http://technet.microsoft.com/en-us/library/dd348559(v=ws.10).aspx
Domain Controllers Warning Event ID: 10154
http://srvcore.wordpress.com/2010/01/02/domain-controllers-warning-event-id-10154/
Hope it helps!
Thanks,
Dharmesh

Error in posting :First create the jurisdiction code at state level ()-URGE

Hi,
We are getting ERROR "First create the jurisdiction code at state level ()" at the time of postiong . This is HST calculated on benefit that we are trying to post;;
GL account tax category is defined as '<' in FS01 and posting without tax allowed is not checked. Are we missing aything;
Regards,
Neelima

Hi Neelima,
Tax Jurisdiction code is related mainly to US.
Please check the if tax jurisdiction code is maintained in SPRO > Financial Accounting > Financial Accounting Global Settings 's basic settings part. If not, maintain the same for the state. This might help you.
Best Regards,
Venkat.
Edited by: Venkateswara Sarma Bhamidipati on Jan 1, 2011 4:45 AM

First create the jurisdisction code 'JI' at state level

Hi Gurus
We have a problem with travel trip expenses while posting to accounting. We got the following error
"First create the jurisdisction code 'JI' at state level " while posting to accounting. We have maintained all the tables including
"no input tax" checked in table V_706D_B." and also the transaction code OBCL to create the jurisdiction code at state level. We got this error after applying the service packs level upto 30. If anyone knows the solution please help me to resolve this issue..
Thanks
Kumar

Sally
Thanks for your quick response. As mentioned in my message we have already maintained the table V_706D_B with radio button checked 'no input tax'. We had this problem after we applied the service packs upto 30 level. Please let me know if you have any other solutions.
Thanks
Kumar

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

To read COMTRADE file in Labview there is an example provided. Can somebody provide the sample .cfg and .dat files required for its working?

Thanks for the reply.
But this library doesn't contain any sample .cfg and .dat files which can be read and understood. Can you please provide the same?

I am having trouble downloading an extension for flash, despite having the most up to date flash version for Adobe Manager Extension CC. What would cause this to happen?

I am having trouble downloading an extension for flash, despite having the most up to date flash version for Adobe Manager Extension CC. What would cause this to happen? It says I need to have flash 7 or higher. I have the most update flash available according to my browsers.

If you are using Flash Pro CC 2014, please update Extension Manager CC to 7.2.1. Then please confirm whether Flash is shown in the product panel of Extension Manager CC. If not, please refer to Re: Why can't I see InDesign CC in my Extension Manager CC.

Changing of the valuation type when the price is changed in Purchase ord

Hi friends
we are using the batch management at material level.
Now the batch is created on the following characteristics
1) Date of receipt of material
2) Date of production of material.
Now the batch no and valuation type is coming same if we post the 105 with same qty of 103. if the qty is split for 105 then the batch and valuation type is getting different numbers.
Now we have entered the new characteristic as price of item and we have to work the batchmanagement on both. so
1) can we do the same in the existing class by adding new characteristics.
2) which table and field to be used for making the characteristic.
3) what solution to be proposed for existing batches.
Points will be awarded for suitable solution.
Thanks in Advance

Hi,
1) Yes you can do the same in the existing class by adding new characteristics in CL02, Before that ensure creating the new Characteristic in CT04.
2) The Characteristcs being created in CT04 gets updated in Table CABN - ATINN.
3) update the new characteristice for the existing batches using MSC2N
Regards
Merwyn

Create the object - not correct data in the file ?

I have the text file, then I parse and create objects MyDocument (one row = one document). If row is corect then I create object MyDocument. But what I must do when row is not correct. The row can have 3 type of errors:
1.Not correct length of row
2.Not filled required fields in row
3.Field are filled by not correct data
Is a good to throw exception when I get one of this errors. Do I need to store this errors on separate class (MyObjectErrors extends Exception)?
So when row is correct I create the object MyDocument. Otherwise I NOT create object MyDocument and throw exception. Is this a good solution?

One question These 3 error you want together or what let me know i ll do that code n give you

Error while creating the 'LOV' type parameter in Siebel 8.1.1.5

Hi,
One of my Customer is facing the below error while creatting the parameter of type 'LOV' in Parameter applet in Siebel 8.1.1.5
Runtime Error!
Program: C:\Program Files\Internet Explorer\iexplorer.exe
This application has requested the Runtime to terminate it in an usual way. Please contact the application’s support team for more information
Could some please let me know what would be the reason for this issue?
Thanks in advance for your help.
Thanks,
Ravi

Please close this thread...it appears that the error occurs when the report involves a big set of records. I tried trying to filter only one record and was able to produce the pdf

Creating the outline and Loading data for TBC in 11.1.2.2

Hi all, feelin kinda dumb here because this task really should not be as difficult as it seems.
I am trying to Load the TBC application in 11.1.2.2 Essbase. I have followed the documentation to
1. Install EIS
2. create the metadata repository and load the xml file provided
I now need to create the essbase cube from this metadata repository, I cannot seem to find any real steps as to how to do this, everything I found was pertaining to creating the repository. Can anyone help define what needs to be done and what steps I need to take, I am new to EIS and Studio so the simpler the better :)
thanx

thanx, this did give me a better understanding of essbase studio, thank you. It did not help so much as getting the structure and data from the repository into essbase. For that from what I understand I can import models from EIS (where I loaded the TBC) one. In doing this I get an error saying that it cannot find any models (which I know are there because I can look at them in EIS. Unfortunately, looking over other posts, I installed Studio on a 64 bit server, which may be the issue I am facing (I hope)
I am going to try and reinstall studio on a 32 bit platform and try the import again.

First create the valuation-type-independent data in LSMW for MM

Similar Messages

Maybe you are looking for