First page on website is blank

I have successfully started a personal domain withiWeb.
My address however shows something like this www.mywebsite/www.mywebsite/firstpage name.html
when I go to MOBILE ME , and look under iWeb, the first page is labeled blank
On the iWeb editing page the first page is www.mywebsite, and the second page is firstpage
here, have a look for yourself
http://www.stoptaxpayerfundedbailouts.com/www.stoptaxpayerfundedbailouts.com/CON RAD_TAMEA_JR_MD.html
What am I doing wrong??
Thanks

You may want to consider renaming your Site to something simpler instead of giving it the same name as your domainname.
On the iWeb editing page the first page is www.mywebsite, and the second page is firstpage
here, have a look for yourself
http://www.stoptaxpayerfundedbailouts.com/www.stoptaxpayerfundedbailouts.com/CON RAD_TAMEA_JR_MD.html
Do not confuse Pagenames with Sitenames with Domainnames.
The first part is your Domainname
The second part is your Sitename
The third part is your Pagename
The Sitename and Pagename is what you entered yourself. You can change it if you want.
Here's a little learning regarding the concept of iWeb Sites :
The concept of iWeb Sites

Similar Messages

First page of PDF is blank

PDF's that I create look fine in all readers except Adobe Reader for Android where the first page is blank. I can't figure out why though for the life of me. Anyone have an idea why something like this would occur?

Thanks Mehwish,
Do you have any insight into why this occurred and if there's a way to avoid it until you guys get this fixed? Any ETA on the fix? This is a huge issue for us right now and I'm trying to figure out any workaround possible. Thanks.

First page blank on report

We made some minor modifications to a report, added a field to an empty space on the middle of the form and updated a simple formula to display one line less of an address and now it seems that the report works fine but the first page doesn't show any data. Does anyone have any ideas what would cause the first page to be without data? The 2nd, 3rd, and 4th pages print data on them fine. None of the formatting changed on the report.
Thanks in advance.

This was a new project for me and we found out the developer had fixed a bug that we reintroduced by adjusting some table linking. Once the developers fixed the bug the first page was no longer blank. It was more of a missing data issue than a totally blank page. Thanks for all your input.

Firefox 3.6.6 only prints the first page on windows 2000

Trying to print web pages using forefox 3.6.6 on Windows 2000 only the first page prints though multiple blank pages are printed after the first
== This happened ==
Every time Firefox opened
== don't know but noticed with 3.5

They gotta fix this. It's been a huge problem for me for more than a year. I''ll defect to Chrome soon if they dont address this bug soon. Printing has been atrocious, even pathetic, i hate to say it. I can only print one page, maybe two if i am lucky. Sometimes, if it prints more than one page, the first page is mostly blank and the formatting of the text and sidebars is completely overlapped and sometimes unreadable. Basically, printing in Firefox is useless - it's a joke. I have to take the URL from Firefox and paste it into Chrome to get a decent print job. Why isnt this bug a higher priority?
Tags: Firefox cannot print, Firefox printing bug, Firefox only prints one page

MG5350 prints only top of the first page (ink is full)

It started a few prints ago that the printer MG 5350 is only printing the head of the first page the rest stays blank, on a document of 3 pages it also throughs out another completly blank page.
All ink toner are full and I am printing via wifi. before this problem it was printing without any problems.
I am printing word 2013 documents.
Any idea what I could do?

This print quality document may offer further help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02208875&tmp_task=solveCategory&cc=us&dlc=en&la...
There is also a document about cleaning the printhead contacts:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01615896&cc=us&dlc=en&lc=en&product=4083969&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

First Page blank -Crystal Reports 2008 Service Pack 1 install issues

Hi,
After installation of Crystal Reports 2008 Service Pack 1 - Redist Install on Web server. First page of all the reports are blank .But when next page is clicked next page displays information ,then previous page the report displayed.
On loading the first page of the report is blank.
The report is fine in Crystal reports
After navigating to the second page - the data on the second page appears with no issues -
Then Navigate back to the first page then the first page data appears.
Thanks in advance .
Regards
Prakash

Just to clarify why this needed to be done. The CR msm and msi files install the correct files into a bin directory. The bin directory is specific to the version of Crystal Reports. Also, the viewer files are installed into the default web site aspnet_client folder. Thus if an application is installed into a custom website, you will have issues, such as red X-es instead of images, errors, failure to load report, etc. For more documentation on this issue see these articles:
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50aa68c0-82dd-2b10-42bf-e5502b45cd3a
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0437ea8-97d2-2b10-2795-c202a76a5e80
Ludek

Blank White screen appears while returning from server page to website page.

I am trying to run my website as hosted webapp on Intext Cloud FX. The scenario I am facing is this
1. I submit to payment page calling server servlet https://abc.com/payment.
2. Server responds with an intermediate page (form with hidden fields), with a form in it submitting parameters to my website url
(http://a.com/checkout/paySuccess.mobile).
My app is struck in second step when server responds with intermediate page and it shows blank white screen.
Any help in this regard will be helpful.
Regards

Got the solution. Problem was that I was trying to submit form from encrypted (https) page to unencrypted page(http). On firefox browser we get an alert message regarding this but on hosted app, no such message is appearing and only white screen is coming. When sumbitted to encrypted (https) page all worked fine.

Lately when I do an images search only the first page actually shows the images- the rest show blank squares- why, and how do I fix it?

Over the last week I have noticed more and more that my searches do not show up properly. Today only the first page of images actually show, the rest are blank spaces, but if I click they go to the image site. The rollover does not show either.
What can cause this, and how do I fix it? I have tried various safe settings but this has no eefect at all.
Thanks.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

How can I make the first page of a PDF load before the whole file on a website

I work for a company that loads they brochures in PDF format on their website and the PDF's were formerly created in Indesign and converted.
When the files were viewed on the website, the first page loaded right away while the others loaded. Now I have created an interactive PDf with buttons in Fireworks, but when I convert the file to PDF and load it on the web, the first page does not load until the whole file loads which is about 5MB.
My employer likes the buttons and interactivity, but does not want teh customer sitting there for a few minutes looking at an empty screen while the whole file loads to view.
Does anyone know what I mean? I could use some help.
Thanks!

Make sure that fast web view is enabled.

Ssrs 2008 r2 rectangle causes first page to be blank

In an SSRS 2008 r2 report I have 6 matrixes that I placed into 1 rectangle so that all the individual items do not float.
The problem is that the first page of the ssrs 2008 r2 report is blank when the report is executing.
I have set the report properties to: landscape, custom paper size, width 14" and height = 11". The report properties are width 14 inches and the height is 11 inches. The body properties keep changing to 26.75719 inches and width = 13.54667 inches.
When I set the border of the rectangle to solid, I can see the rectangle when the SSRS report is executing. The rectangle appears before any of the matrixes are displayed. However when I look at the rectangle in design mode, the rectangle is around all
6 of the matrixes.
Thus could you tell me why the rectangle is displayed in a different location when the report is executing and not around all the matrixes at that point?
If there is no property that can be set, then should I have more than one rectangle? To place the objects into separate rectangles, I want to mention that that there is a header matrix and a summary rectangle that need to be shared. Matrix #2 and Matrix #3
are for students in grades 01 to 08. Matrix #4 and #5 are for students in grades 09 to 12.
Can you tell me what I can do so that I do not have a blank first page when the SSRS 2008 R2 report is executing?

Hi wendy,
If we want to use a rectangle as a container for other items, we should drag them into the rectangle. When we move the rectangle, the items that are contained within the rectangle move along with it. An item within the rectangle shows the name
of the rectangle in its Parent property.
For more information about using a rectangle as a container, please see:
Add a Rectangle or Container (Report Builder and SSRS)
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Blank first page and chart printing on the second page

I have a subreport in my report footer that displays a chart. The detail section is suppressed in the main report. For some reason the chart displays on the second page of the report and the first page is blank except for the report header and page footer. In the section expert the 'new page after' box is checked and grayed out so I can't remove the check to see if that solves the problem. I've never been particularly skilled in regards to reporting and in addition it's been quite a few months since I've even worked on a report. I'm using Crystal XI. Can anyone provide suggestions on where I might look to solve this problem.

Main Report
Report header--suppress blank section
Page header --suppress blank section; supress (no drill down) - page number = 1
Detail--Suppress (no drill down); suppress blank section
Page Footer--suppress blank section
Report Footer--suppress blank section
Sub Report
Report header a--suppress (no drill down) - {?Pm-?Graph Type}<>"Pareto" ; suppress blank section
Report Header b - suppress ( no drill down) - {?Pm-?Graph Type}<>"Pareto-Top 5" ; suppress blank section
Report Header c--Suppress blank section
Group Header #1a--Suppress (no drill down) - If {?Pm-?Graph Type}="Pareto-Top 5" or {?Pm-?Graph Type}="Pie-Top 5" then
{@nIncrement}>5
) ; Suppress blank section
Group Header #1b--Suppress ( no drill down) - {?Pm-?Graph Type}="Pareto" or {?Pm-?Graph Type}="Pie" ; Supress blank section
Detail--Suppress (no drill down); suppress blank section
Group Footer #1--Suppress (no drill down) ; suppress blank section
Report Footer--suppress blank section

New page for group headers - the first page is blank

In the Section Expert, if you set the Group Header #1 to "New Page Before", and there is a Page Header section, the first page will show the Page Header with no further data. The rest of the report does the page breaks correct, that is, a new page every time the grouping changes.
How do you stop this blank page at the beginning?
If you assign New Page After in the Group Footer, there is a blank page at the end of the report, which is also annoying. What am I missing?
Robert

If you are using "New Page Before" then use the condition by clicking on X+2 corresponds to it and write
Not OnFirstRecord
For "New Page After" write
Not OnLastRecord
Regards,
Raghavendra.G

Unwanted Blank Page When Table At Bottom of First Page

I have an RTF template which has a table with the typical for loop as the row generator and a totals row after that. There are no line breaks after the table, and the table's paragraph is set to single line spacing with 0 pt spacing before and after.
When the table reaches the bottom of the first page, but does NOT go onto the next page, there is a blank page at the end of the report. Any ideas on how to eliminate this?
Thanks in advance,
Kurz

I have an rtf template which is used to print output in pdf format. I have a table which has many rows which displays data for each record. In order to avoid breaking the page in between the rows of a record , i have added an outer table with single row and column and pasted the data table inside it and changed the row property of outer table to 'Allow Rows to Break Across Pages' to unchecked. It works fine only if the first record set length does not exceed a full page. IF the first record expanded to more than one page, it leaves a blank page at the very first and start the record at the second page. Can you please advise how to solve this issue. Its very URGENT please..

First page appears blank when viewing a Crystal Report in the web viewer

I have seen threads and KB articles regarding this issue but the suggested solutions do not correct the issue. (KB articles [1423482 and 1439109)
The issue only started after upgrading from CR 2008 runtime to CR 2008 SP4 runtime.
When the page containing the viewer control first loads, the report pane is completely blank.
The viewer toolbars appear as expected, and the report can be exported using the Export button on the viewer toolbar without issue.
Changing the zoom level causes the first page of the report to appear as expected, and reverting the zoom level does not cause the report pane to become blank again.
Navigating to the next page of the report works and the second page appears as expected. Returning to the first page shows the first page of the report as expected.
Our application is installed on dozens of servers but this issue only has occurred on a few installations at this time.
Steps attempted to resolve the issue:
1. Uninstall CR 2008 SP4 runtime, confirm the CrystalReportViewers12 folders were removed from the folders C:\Inetpub\wwwroot\aspnet_client\system_web\2_0_50727 and C:\Program Files\Business Objects\Common\4.0, then reinstall CR 2008 SP4 runtime.
2. Ensure there are no underscores in the server name.
3. Change the crystalreportsviewers12 Virtual Directory to use the folder C:\Inetpub\wwwroot\aspnet_client\system_web\2_0_50727\CrystalReportViewers12
4. Remove and recreate the crystalrep[ortviewers12 Virtual Directory.
5. Replace the C:\Inetpub\wwwroot\aspnet_client\system_web\2_0_50727\CrystalReportViewers12 folder from a server that does not exhibit the issue.
Any new ideas or suggestions? Thanks

Moving post to .NET SAP Crystal Reports forum
Hello Scott
What browser are you using and what is the version of the browser?
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

I cannot leave the first page of a series of slected websites 1, 2, 3 and so on, I always return to the same first page.

When searching an item with Google, a page full of websites is presented, with on the bottom of the page a choice of more websites on the following pages: 1 2 3 4 5 (all with underscore).
When I try to click the next page, always the first page is presented.

Quit Safari.
Open the Library folder in your home folder as follows:
☞ If running OS X 10.7 or later, hold down the option key and select Go ▹ Library from the Finder menu bar.
☞ If running an older version of OS X, select Go ▹ Go to Folder… from the Finder menu bar and copy the line below into the text box that opens:
~/Library
Delete the following items from the Library folder:
Caches/com.apple.Safari/Cache.db
Preferences/com.apple.quicktime.plugin.preferences.plist
Preferences/QuickTime Preferences
Relaunch Safari and test.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Select "/var/log/cups/error_log" from the file list. Post the messages from the time of the last printing attempt.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.

First page on website is blank

Similar Messages

Maybe you are looking for