Fix for javascript errors in OrganizationDesigner and other places

A sequence of DLL/Control re-registration to clear up javascript errors in all the OrganizationDesigner popups.
I had a lot of problems with javascript errors in Org Designer. I was able to fix them by re-registering some IE controls and libraries. In doing so I have cleared up all my javascript errors. Here is the sequence - hopefully it helps others.
open a command window and type the following:
regsvr32 msscript.ocx
regsvr32 dispex.dll
regsvr32 vbscript.dll

Hi Blaine,
This will also fix some errors you might see when a customer clicks on a calendar date/time field and the calendar shows up blank. Was difficult to diagnose it but found unrelated articles on the internet. Thanks for posting here and saving many people the time.
Thanks,
Ant

Similar Messages

Error 50/53 and other related numbers

Hello, yesterday my ipod classic started having trouble playing songs. It would attempt to play some songs and struggle to do so. If it did manage to play the song, it would only manage a few seconds before skipping to the next song that it could easily play. I figured it just needed a little reset and did so but the ipod still had problems. Then I tried synching it with iTunes but no improvement. Then, I decided to restore it and start from scratch.
It started synching and after awhile, it would stop short and say X song couldn't be copied to the ipod because of an unknown error: -53 (50 and other numbers have also appeared). Now I've done some searching already and tried numerous things already but nothing helps the situation. The most recent thing I tried was suggested here http://support.apple.com/kb/TS1539 and that didn't work. I then tried restoring the ipod and checking for hard drive errors, which it would detect and promptly fix but the ipod still failed to synch.
However, after going through topics here and searching online, I have narrowed it down somewhat. While slowly synching songs by the smaller playlists (as my library has about 7000 songs), the ipod seemed to have no trouble as songs were copied quickly and without issue. But once I broke 1000 songs, it started struggling again. There were no error messages yet but I do believe the problem lies with the amount of data it's trying to copy. The only problem is, I have a 160 GB Ipod Classic so there shouldn't be any issue regarding available space. Even in iTunes, it says I have over 118 GB of data available if I were to copy the entire library. I recently found this topic https://discussions.apple.com/thread/4171036?tstart=0 but it seems to apply to Windows 7 instead of Windows 8 so I don't know for sure if a disk quota is the issue. Also, I have no idea on how to check the disk quota on Windows 8 (if I can check it at all).
I really don't want to shell out $250 for a new ipod unless all options are exhausted. I'd take it to the Apple Store but my Applecare+ warranty already expired and if I recall, I can't purchase a new one. Can anyone help me? Please?

An addendum. After it got hung up around 1000 songs, I disconnected it and it turned out to have lost all of the songs already on it from the failure.

Fix for "System Error" message

Heres the fix for "System Error" error message when trying to open search and the dictionary...Open main menu->applications, Scroll down to the last app's icon and press the options button and choose organize, now select the last icon and choose remove, now it will ask "yes" or "no" wait there for 5-6 secs and give "no" and then choose "done", now the icons would refresh revealing the "Search", "Dictionary" and "Update" apps on the screen...No you will not get the "System Error" messages..

What operating system are you using Premiere?
Premiere requires a 64-bit OS

[svn:fx-trunk] 10055: localized classpath fix for mxmlc.jar,compc. jar and asdoc.jar - add mxmlc_ lang .jar to the path.

Revision: 10055
Author:   [email protected]
Date:     2009-09-08 09:41:10 -0700 (Tue, 08 Sep 2009)
Log Message:
localized classpath fix for mxmlc.jar,compc.jar and asdoc.jar - add mxmlc_.jar to the path. Without these localized errors and warnings aren't generated.
QE notes: ensure the errors and warnings are generated properly
Doc notes: no
Bugs: sdk-22806
Reviewer:
Tests run: checkintests:pass
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/sdk-22806
Modified Paths:
    flex/sdk/trunk/modules/compiler/build.xml

So do you know how I can get JavaStudio to add
library classes and JAR''s into the packaged dist
file?I was wrong in my previous post. Sorry.
It's impossible to specify additional classpath with '-jar' option.
http://java.sun.com/j2se/1.5.0/docs/tooldocs/windows/java.html#options
�-jar
When you use this option, the JAR file is the source of all user classes, and other user class path settings are ignored. �
So the only solution is to add libs into jar file and declare them in manifest.
One possible way of how to do it in JSE8 is:
1. Put all necessary lib jars to some place under src folder.
2. Add those jars into Compile-time libraries list (Project properties -> Libraries) for correct compilation
3. Switch to 'Files' JSE8 tab, open manifest.mf file (it's in projects root) and add your lib jars to it.
Syntax is:
Class-Path: relative URLs
That's it.

[svn] 2703: Fixes for bad links in seeTag and inheritance link.

Revision: 2703
Author: [email protected]
Date: 2008-08-01 08:45:08 -0700 (Fri, 01 Aug 2008)
Log Message:
Fixes for bad links in seeTag and inheritance link.
@seeTag was causing duplicate entries for package name in the array - which was causing a bad link..
Bugs: SDK-9440, SDK-14265, SDK-12745
QA: Yes
Reviewed by: Paul
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-9440
http://bugs.adobe.com/jira/browse/SDK-14265
http://bugs.adobe.com/jira/browse/SDK-12745
Modified Paths:
flex/sdk/trunk/modules/compiler/asdoc/asDocHelper.as

Revision: 2703
Author: [email protected]
Date: 2008-08-01 08:45:08 -0700 (Fri, 01 Aug 2008)
Log Message:
Fixes for bad links in seeTag and inheritance link.
@seeTag was causing duplicate entries for package name in the array - which was causing a bad link..
Bugs: SDK-9440, SDK-14265, SDK-12745
QA: Yes
Reviewed by: Paul
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-9440
http://bugs.adobe.com/jira/browse/SDK-14265
http://bugs.adobe.com/jira/browse/SDK-12745
Modified Paths:
flex/sdk/trunk/modules/compiler/asdoc/asDocHelper.as

I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

Notes:
1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

Hello. It can be a iPhone4 accessories for the one with pictures and other things are transferred wirelessly to a TV? Thank you

Hello. It can be a iPhone4 accessories for the one with pictures and other things are transferred wirelessly to a TV? Thank you

You need an Apple TV to be able to wirelessly send pictures etc. from iPhone.
However you can buy an adapter if you want to connect to a TV
http://store.apple.com/us/product/MC953

[svn:fx-trunk] 12078: Fix for change events in Slider and ScrollBar.

Revision: 12078
Revision: 12078
Author:   [email protected]
Date:     2009-11-21 00:14:46 -0800 (Sat, 21 Nov 2009)
Log Message:
Fix for change events in Slider and ScrollBar. They now dispatch change events as before, whenever the user alters the value. In addition, changeStart and changeEnd events will be dispatched at the start and end of a user interaction or animation.
TrackBase.as - Added metadata for changeStart/End events. Dispatch change, changeStart/End events when appropriate.
Slider.as - Dispatch change, changeStart/End events when appropriate.
ScrollBar.as - Dispatch the appropriate events. Note that changeStart/End will not dispatch when shift-clicking on a non-animating ScrollBar. Renamed animatingSinglePage to animatingOnce to better reflect its function. Refactored some method calls to the new private stopAnimation(), which is more consistent with Slider. Refactored the button handlers to make stepping more readable. Added a setValue call in animationEndHandler where we were ending up off the snapInterval when shift-clicking.
Updated FlexEvent, ScrollBarTestScript and VideoPlayer to handle the new events.
QE notes: Update Slider and ScrollBar tests
Doc notes: No
Bugs: SDK-24264
Reviewer: Ryan
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24264
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/events/FlexEvent.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/ScrollBar.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/Slider.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/TrackBase.as
    flex/sdk/trunk/frameworks/tests/basicTests/spark/scripts/ScrollBarTestScript.mxml

[svn:fx-trunk] 5408: Fix for - Compiler error using Reparent in a Halo Navigator.

Revision: 5408
Author: [email protected]
Date: 2009-03-18 20:57:19 -0700 (Wed, 18 Mar 2009)
Log Message:
Fix for - Compiler error using Reparent in a Halo Navigator.
QE Notes: None.
Doc Notes: None.
Reviewer: Paul, please review.
Bugs: SDK-20099
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20099
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ComponentBuilder.jav a

I just bought the revolution after having a blackberry and i'm looking for a notepad type software and a place to store passwords.

i just bought the revolution after having a blackberry and i'm looking for a notepad type software and a place to store passwords.

I use SafeWallet after trying most of the apps in the market place. It's a bit expensive compared to most and you have to pay for the desktop application which sucks but the other apps were some cumbersome I knew I would never use them after the initial setup.
I'll add the normal caution of storing passwords in a non-protected text file but you probably know that
Bob

Itunes artwork display issue and a fix for 'unknown error occured (-50)'

Too bad they dont have stickies. This would be a great one.
This is a thorough fix for art work and the -50 error.
If you see artwork in itunes, first verify that the artwork is in the mp3 tag using a program like "tag and rename" http://www.softdepia.com/tagrename_download1291.html
If the artwork shows up in tag and rename, then you added it correctly.
If the artwork isn't displaying on ipod, delete the song and retransfer to the ipod. Next make sure the "view artwork" check box is checked. To do this connect your iPod to iTunes and there will be a checkbox that should be checked to see if you want artwork to show up on your iPod.
If you get this message -
The ipod cannot be updated. An unknown error occured (-50).
And have no artwork at all in you IPOD , dont fret. I am getting there..
NO you DO NOT NEED to FORMAT YOUR IPOD YET as commonly posted. I have tested and retested the following fix-
Eject IPOD. Kill ITUNES.
Backup the following files
iTunes Library.itl
iTunes Music Library.xml
& anything in the Previous Itunes library folder
and delete them. More info on these at http://docs.info.apple.com/article.html?artnum=93732
Dont worry, its much easier to recreate the database than to wipe your IPOD.
Next Start up ITUNES. Plug in IPOD. You now should have a empty database.
At this time, uncheck copy ARTWORK to IPOD, and when it's done deleting artwork, CHECK Copy ARTWORK to IPOD.
It now should sucessfully display ARTWORK and not get the -50 error!!
Now, goto you ITUNES Music folder and drag to the library and it will add you music back in, including your PODCASTS.
All you need to do is click the RESUBSCRIBE button and you are back in business!
IF this fails, which i cant DUPLICATE anymore, try this
http://docs.info.apple.com/article.html?artnum=300248
Its the DREADED IPOD FORMAT article.
But you probably wont need it if you follow all these steps.
Post back if this doesnt work and if it does, give me some credit;)

Just as an fyi, to shorten this procedure instead of deleting the files i found out you and open the .itl files and delete all the lines in it so its an empty file.
Then open itunes, and it will rebuild the database with the files from the .xml file.
This saves you from having to rescan the songs..

Help! Why am i getting these JavaScript errors in Dreaweaver and how can I fix it???

This only happens whenever I try to access code view, and it won't allow me to add any more code. This is the error message I get:
"While executing DWMenu_View_Text command in menus.xml, the following JavaScript error(s) occurred:
Exception thrown in native function"
A third party tried to access my site, but the page froze, with an error message:
"Script error on line........."
I'm not sure if this has something to do with FileZilla, but now when I try to open it, I get number of error messages about, "failed to write xml file" and "Application Data\FileZilla\filezilla.xml (error 5: access is denied.)"
I've tried deleting the WinFileCache from Dreamweaver and disabled all extensions, but none of these helped.
Please help. does anyone know what's going on?

I've never heard of a Filezilla DW extension, but this is the KB article for you:
http://kb2.adobe.com/cps/405/kb405604.html

Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled

I keep getting this error message over and over when all I have plugged in is an Apple USB keyboard and Apple Mouse. Please help...this is crippling the computer!

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

Is there a fix for the incompatibility between itunes and Windows Vista?

I'm having a problem with itunes and Windows Vista. When I download itunes it disables my dvd drive. I have found a fix for that by deleting some registry items, but when I do that itunes is disabled. Does anyone know of a solution to this problem?

Hey Don,
What exactly happens after you install iTunes? Do you see an error message?
This article describes device filter issues that can be caused by application conflicts:
http://docs.info.apple.com/article.html?artnum=305422
Jason

Fix for FOND error on Lion

I just upgraded my system from Leopard to Lion and I noticed that now my Univers fonts will not activate. When I went to Fontbook I noticed that all of my Univers fonts come up with the same error message 'FOND' font association unability and now it will not activate or install. I went through several other forums and found that this error was common on Leopard but I haven't found any mention of it on Lion. There also does not seem to be any available fixes for Lion according to my searches.
I attempted to reinstall the font with a new version of the Univers CE family but that refused to install because the older font that was having issues with Lion was still installed (albeit not working). I attempted to remove the non-functional font and then reinstall the new one and that still did not work. If there is a way to just force Lion to install the font despite the FOND error that would be preferable.
This is highy inconvenient since the Univers font family is what I use the most in Quark and now I will have to manually switch over to another font for my files to display correctly. It is not the entire Univers font family that is affected by this glitch, only the Univers fonts that have CE in them. According to all of the reports I've seen with Leopard, this issue is caused by it not recognizing bitmaps or something like that. If anyone can offer any insight on how I can fix this I would be very appreciative.

kirchoff - if you still have an issue with the font, have you completely cleared the font cache by restarting your mac in safe mode? I'm wrestling with FOND errors in Lion myself and that has alleviated 'some' of my problems. my other problems are related to screen fonts that have multiple weights contained within the file and internal names that don't resolve well...but i digress. good luck!

Fix for javascript errors in OrganizationDesigner and other places

Similar Messages

Maybe you are looking for