Fixing 'process' value through several HUs in VLMOVE

Hi,
When you use VLMOVE to move several HUs to a storage location, after selecting the process (for example, 311), the storage location and the HU number and clicking enter, the HU is added to the list at the bottom part of the screen, and all the values (process, SL, HU) disappear.
In my scenario, since we have many HUs we need to move to the same SL using the same process (movement type 311) , we want to be able to add all the HUs without having to select 311 for each HU.
Is here a way to local the value of the process screen field?
Thanks,
Yossi

Similar Messages

I want to multiply several channels in a diadem script by a value through a loop. How do i do this?

all the examples i've seen use channel names to specify the channels but i want to use the channel number so i can loop through several. I can't figure out how to do this in vbscript
I've tried:
for i = 1 to 4
Call FormulaCalc(Ch(i) = Ch(i)*2)
next
using several variations of double and singel quotes with no luck. It works if i use the channel number instead of i but I want to be able to loop through a long list of channels to do the same calculation....any help??
thanks

icefield,
You can try the following code:
DIM ChGrpIndex
DIM i
ChGrpIndex = 1
FOR i = 1 to 4
Call FormulaCalc("Ch('[" & ChGrpIndex & "]/[" & i & "]') := 2 * Ch('[" & ChGrpIndex & "]/[" & i & "]')")
NEXT
Regards,
Song Du
Systems Software
National Instruments R&D

Create APG ( approval granted) status in process order through user status

Dear Gurus,
My business requirement is to create APG ( approval granted) sytem status in process order through user status functionality, if possible.
This needs to be activated while creating process order itself. Any help is greatly appreciated.
Warm Regards,
Satish

As of this date, we have still not implemented a fix, but I did get some information from someone else who has.
I'll post his information here for all to see. Hope you find it helpful.
From: Joe
Yes we managed to do it.
After several false starts and CMOD/projects which suffered because only the default keys (for order number, aufpl etc) were in place and not the actual, we coded up the IN_UPDATE method in the WORKORDER_UPDATE badi. This gives us the final format after the DB save (but before the commit). The update of the STATUS using the SAP std function module was actioned successfully but the status profile was not actually passed through. We assumed that this was because of the update task - so we introduced an INSERT into JSTO instead (a bit naughty I know, but desperate needs etc). If you require anything more let me know.
Best Regards
Joe

How can i transfer the system variable value through DTW in SBO

Hi,
I want to transfer the system variable("Excisable" in the Item master data in the SBO 'India' database) value through the template by the DTW.
But i don't have any template consisting of this system variable.
So please suggest me that how can i transfer the value of this system variable(Excisable) and by which template.Please tell me any constraint if it is on the value of this variable.
I will be very thankful to you.
Thanks & Regard,
Sandeep
Message was edited by:
Marc Riar

Sandeep,
This question has come up several times on this Forum.
Please read this read.
Importing excisable item
Suda

I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps.

I want to open a folder in a separate window by clicking on it. For some reason when I click on a folder it just replaces the one I was just in. I want them both to be open at the same time without having to go through several steps. Old apple operating systems made it easy to have several folders open at one time.

Eric, thanks that works but seems like an extra added step also to do it that way. I've got to move and organize a ton of files and I'm looking for a easy way to get this done. I could also open the folder into a separate tab and then drag the tab out so it becomes an open window but thats a lot of fussing around also with extra steps. Not sure why these newer operating system seems more confusing and less user friendly than what they used to. In the past I could just click on any folder and it would open in a separate window making it really easy to copy or move files from one place to the other just by simply dragging them from one window to the other. Seems like I'm going through several extra steps now to do a simple task.

Error while processing payment through F110

Hello
I am getting the following error while processing payment through F110
> Payment method selection for items due now to the amount of EUR          287.32-
> Payment method "Q" is being checked
> Bank details are being checked
>     Customer/vendor bank details are being checked
>   System reads house banks and checks if they are allowed
> Our bank BBVA is being checked
> Bank different from the specified bank CAIXA in master record or items
>   House bank is selected ...
> No permitted payment method exists
Information re. customer 220912 / paying company code ES4 ...
... payment not possible because of reported error
I have created one payment method "Q" & in ranking order only House bank given as BBVA. I m not able to under stand where to make correction to make this resolved

Check if different House bank is assigned in Customer Master record - Co code - Payment transactions.

Null Error in Displaying a value through view attribute

I just want to display a value through message styled text bean from view attribute .
For that i use the code in PR:
But it gives null error: Please any one help me.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
OAViewObject vo = (OAViewObject)am.findViewObject("StaffInfoVO1");
if(vo!=null)
OARow row = (OARow)vo.getCurrentRow();
System.out.println("vo is not null");
String str1 = row.getAttribute("FullName").toString();
OAMessageStyledTextBean stext1 = (OAMessageStyledTextBean)webBean.findChildRecursive("RFStaffName");
stext1.setText(str1);
While getattribute("FullName") executed it gives null error. Why?
how to rectify?

Hai,
I can execute the query in toad which returns 1 row of data. It is not null rows.
But my vo object, why it is not executed. Returning null. I dont know.. Too many hours i spent.
VO query:
select distinct papf.person_id,papf.FULL_NAME,
papf.EMPLOYEE_NUMBER,
papf.EMAIL_ADDRESS,
papf.WORK_TELEPHONE,
hla.COUNTRY,
sysdate,
pap.NAME,
haou.NAMe department,
ood.ORGANIZATION_NAME
from
per_all_people_f papf,
per_all_assignments_f paaf,
per_all_positions pap,
per_jobs pj,
per_grades pg,
per_person_types ppt,
hr_all_organization_units haou,
hr_locations_all hla,
org_organization_definitions ood
where
papf.PERSON_TYPE_ID=ppt.PERSON_TYPE_ID and
papf.PERSON_ID=paaf.PERSON_ID and
paaf.POSITION_ID=pap.POSITION_ID and
paaf.JOB_ID=pj.JOB_ID and
paaf.BUSINESS_GROUP_ID=haou.BUSINESS_GROUP_ID and
papf.person_type_id=13 and
haou.business_group_id=202 and
haou.NAME like '%Global%Sales%' and
papf.FULL_NAME like '%Stand%' and
paaf.LOCATION_ID=hla.LOCATION_ID and
paaf.ORGANIZATION_ID=ood.ORGANIZATION_ID and
sysdate between papf.EFFECTIVE_START_DATE and papf.EFFECTIVE_END_DATE and
sysdate between paaf.EFFECTIVE_START_DATE and paaf.EFFECTIVE_END_DATE
Help Me.
Thanks & Regards

How to trigger a process chain through

Hi All,
Can any one send me the steps to trigger a process chain through a job in sm37.
Thanx
Kishore

Just a trigger ?
Best way I can suggest is to call the function module 'RSPC_API_CHAIN_START'...
So, create an ABAP Program, call the function in the program. You can add parameters and a selection screen to make the program generic and add variants to it.
Once you are done with this, schedule a job with this program and whichever variant you're lookin for and you should be done.
- Aditya
Assign points if helpful

TS3217 When I try to skip one song on my ipone, it skips through several. The songs that are skipped can be played on the same iphone if I go into my itunes and select that song. So this tells me that the song can be played, therefore, it is not the song.

When I try to skip through a song on my iPhone, it skips through several songs. The songs that are skipped can be played on the same iphone (when I go into to itunes library on my phone), so I know that it's not the song. I have the latest softeware downloaded on both my iphone and itunes. In fact, this only recently started occuring when I reconnected my iphone to my laptop about a month ago to install the new updates on itunes.
I also have an itouch and an ipod, both of which have been updated at the same time as my iphone and they do not skip through songs.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
BTW this is the iPod touch forum

How to calculate usage value through measuring document.

Hi,
While creating Sales Order with reference to a Contract i need to update the usgae value in the Order Quantity ( RV45A-KWMENG ) field (at line item level).
Can you help me calculate usage value through measuring documents for equipment over a period of time.
Is there any function module for the same?
Thanks.

Hi,
To determine the usage value of a an equipment I had followed the following.
From table STPO, check if the material receipted belongs to a standard BOM (STLTY='S')
If yes, record the BOM (STLNR) and the BOM item node number (STLKN)
From PLMZ table, select the task list type (PLNTY), the key for task list group (PLNNR), the group counter (PLNAL), the task list node number for operation (PLNKN), if the record is not flagged for deletion (LOEZ)
From PLFH table, select the object type of the CIM resource (OBJTY), the object id of the resource (OBJID), the usage value (EWVGW) if the record is not flagged for deletion (LOEZ)
From CRVE_A table, select the equipment number (EQUNR)
The result of this selection will be all the tools which can be used for the production of the material receipted.
The measuring point for this or these equipment(s) will be selected from equipment number and EQUI table
The result of this selection will be all the measuring point to update.
Create new measurement document for the selected measurement point (transaction IK11)
Technically go as follows:-
MAT = material receipted
Select STLY, STLNR, STLKN from STPO table where IDNRK='MAT' and STLTY='S'
If results exist
Select STLTY, PLNNR, PLNAL, PLNKN from PLMZ where PLMZ.STLTY=STPO.STLTY and PLMZ.STLNR=STPO.STLNR and PLMZ.STLKN=STPO.STLKN
And PLMZ.LOEZ<>'X'
Select EWVGW, OBJTY, OBJID from PLFH twhere PLFH.STLTY=PLMZ.STLTY and PLFH.PLNNR=PLMZ.PLNNR and PLFH.PLNAL=PLMZ.PLNAL and PLFH.PLNKN=PLFH.PLNKN and PLFH.LOEKZ<>'X'
USAGE=PLFH.EWVGW
Select EQUNR from CRVE_A where CRVE_A.OBJTY=PLFH.OBJTY and CRVE_A.OJBID=PLFH.OBJID
All the equipment number selected at this moment will be called EQUIP in the next steps
EQUIP= Equipment number previously selected
Select OBJNR from EQUI where EQUNR=EQUIP
Select PARNR from IHPA where OBJNR=EQUI.OBJNR
If PARNR = Vend then
Select IMRC_POINT from equi where equnr=equip
All the measuring points selected at this moment will be called MEASP in the next steps
For each MEASP
Insert into IMRG the new increment value (USAGExMAT) in field CDIFF
Remark: the field CDIFF is managed in floating point number, accurate to 8 bytes.
I hope this is useful for you.
Regards,
Ankur Parab

How to pass attribute values through variables in JSP Custom TagLib

Hi,
Can anybody help me how to pass values through varuables in the jsp custom tag.
i am using JSP custom tag. I am unable to pass attribute values through variables.
<invitation:invdetails invid="<%=invid%>"/> The value is passing as <%=invid%> ,not value of the invid.
But i am getting throuh the fllowing
<invitation:invdetails invid='1' />
Please anybody suggest me how to pass value by using the variable.

Hi,
It sounds like you need to set the <rtexprvalue> tag to true in the TLD for your tag. If you do this the tag will read in the value you are trying to pass to it.
dapanther...

Trigger Process Chain through the Web

Hi,
I am trying to allow the users to control when they trigger a process chain through the web.
The users have a number of integrated planning sheets, which they access and input, once they are happy with the inputs, then they want to trigger the process chain to carry out additional loads.
I am using function module RSPC_CHAIN_ACTIVATE_REMOTE to trigger the process chain, when I test this with the chain set to direct scheduling it works fine.
I have set a planning function to call RSPC_CHAIN_ACTIVATE_REMOTE, with the process chain in question. Now when I run it with the chain set to direct scheduling it repeatedly calls the process chain over and over again, like it is in an endless loop.
When I try setting the chain to Meta Chain or API nothing happens.
Does anyone have any ideas why I can't get this to work through the web?
Thanks
D

CALL FUNCTION 'RSPC_API_CHAIN_START'
    EXPORTING
      i_chain       = 'YOUR PROCESS CHAIN NAME'
    EXCEPTIONS
      error_message = 1.
   IF sy-subrc <> 0.
      CALL FUNCTION 'BALW_BAPIRETURN_GET1'
       EXPORTING
        type             = sy-msgty
        cl               = sy-msgid
        number           = sy-msgno
        par1             = sy-msgv1
        par2             = sy-msgv2
        par3             = sy-msgv3
        par4             = sy-msgv4
       IMPORTING
        bapireturn       = p_return.
      RAISE STREAM_FAIL.
   ELSE.
     RAISE STREAM_SUCCES.
     RETURN.
   ENDIF.

How to make the LV front panel controls the current value through the program is set as the default value when the next time you open?

How to make the LV front panel controls the current value through the programis set as the default value when the next time you open?
1110340051

Try this: Re: How to make a VI remember the latest control value?
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some annonomus file, to which I have to go through several steps to get to My

Before this last upgrade, when I would create a file and do a "Save As" it would always open "My Documents" by default, which is what I prefer. But since the upgrade it opens in some anonymous file, to which I have to go through several steps to get to My Documents, and I can't seem to select the default in my preferences. HELP PLEASE!!!

Before this update of what software from what version to what version using which OS?

How to pass form value through URL?

I have a page set up so that pressing the submit on a form will execute a certain page. For certain reasons I also have a URL HREF link that performs a different function. I need to get the value of a radio button group (all with the same name) and pass that value through the URL if it is pressed. So if someone clicks on the second radio button in the list which has a value of 2, I need to somehow set that to a variable to pass through a URL link. Each time the user changes the radio button I need to dynamically change the variable too.
Is there any way to do this?

Thanks for the suggestions everyone. Here is what I have so far:
I have a cfInput that binds to the radio buttons so the value of the cfinput changes dynamically.
I have a CFDIV that binds to a separate .cfm page that passes the cfinput through as an argument.
The .cfm is very basic:
<cfoutput>
    <cfif isdefined("url.InputText") AND url.InputText NEQ "">
        <cfset FeedVar = #url.InputText#>
    <cfelse>
    </cfif>
</cfoutput>
This method appears to work and it sets the Feedvar variable to the appropriate value. However on my first page with the cfdiv tag when I try to pass the #FeedVar# variable through a URL it says it is not defined.
Any clue if I am doing something wrong passing the new variable back?
Here is the CFINPUT and CFDIV tags:
<cfinput type="text" name="update_typeURL" bind="{update_type}" bindonload="true" />
<cfdiv bind="URL:setURlVar.cfm?InputText={update_type}" ID="theDiv" bindonload="true" />
Any ideas on how to read the newly set variable?

Fixing 'process' value through several HUs in VLMOVE

Similar Messages

Maybe you are looking for