Create APG ( approval granted) status in process order through user status

Dear Gurus,
My business requirement is to create APG ( approval granted) sytem status in process order through user status functionality, if possible.
This needs to be activated while creating process order itself. Any help is greatly appreciated.
Warm Regards,
Satish

As of this date, we have still not implemented a fix, but I did get some information from someone else who has.
I'll post his information here for all to see. Hope you find it helpful.
From: Joe
Yes we managed to do it.
After several false starts and CMOD/projects which suffered because only the default keys (for order number, aufpl etc) were in place and not the actual, we coded up the IN_UPDATE method in the WORKORDER_UPDATE badi. This gives us the final format after the DB save (but before the commit). The update of the STATUS using the SAP std function module was actioned successfully but the status profile was not actually passed through. We assumed that this was because of the update task - so we introduced an INSERT into JSTO instead (a bit naughty I know, but desperate needs etc). If you require anything more let me know.
Best Regards
Joe

Similar Messages

Status of process order

Hi all,
In the SAP i´m working when i enter the process order the beginning status is MANC (one of them), when i do the availability check this status change to MACN.
Now:
In which point of the SPRO is this set-up ??
Is it posible to avoid the release of the order until status MANC is set ?? (i want the user to always chaeck availability)
Is there a similar SPRO for checking capacity ??
Thanks !
D

Prasobh,
The biz need is like this. First of all we need to check availability and capacity (and if any of them is not ok, you can not release). To solve this, as you tell me, you have to set OPJK, business transaction 2.
The other point is to introduce a "Freeze" status. From where you are not allow any more to change data from the master recipe, this status also before the release.
This point is the one i am trying to figure it out.
Thanks,
Dalmiro

Table for process order &Selection profile status details -reg

Hi ,
From which tabel we can get the link between the process order and selection status profile (like SAP001 etc..
When we input the process orders we should get the selection status profiel linked to it
Regards,
Madhu Kiran

Hi,
The tables JEST and JSTO are related to status profile .
What i need is of Selection Profile
You can see this field in COOIS or COOISPI just above the Sys Status field
We need this urgently
Can any one help ?
Madhu Kiran

Allowed Transaction by system status in Process Orders

Hi all:
I have a problem manging the process orders, related to the system status and allowed transaction. The question is: How could I prevent the use of certains transaction (i.e. RFBU FI:Postings) when system status = TECO in one process order where status profile is not assgined (that is t003O-STSMA not filled)?.
At this moment I have a lot of process orders in that status and I want to avoid the posting from FI just if the system status = TECO
I will thank you very much for any help
Best Regards

As a standard setting, you will not be able to restrict the financial postings when an order is TECO'ed but you may do it through by enhancing user exit/ BADI in the respective transaction...

User Status for process orders

Dear Experts,
We are using user statuses for process orders & with this we are resricting or allowing certain business transactions.
My question is can we automatically set the two consecutive user statuses ?
Means when the GR for process order is done i have set the user status as GR.
Next user status is CLSD.
So after completing the closing of process order by settlement transactions can i set the staus as CLSD automatic?
I am trying to do it but i am getting error as-
"Status CLSD is not allowed (ACT 30000292 0010)"
Your help is highly appriciated
Regards
Vivek

Hi,
1) Still your order is carrying cost, it has not settled properly
2) you can check in CO02 itself, Go to tool bar at top
3) here Go to > Costs > Analysis & check whether order is set to Zero
4) you can check in KKBC_ORD also
Also, pls refer below link
Re: HOW automatic order status change to CLSD
regards,
Sankaran

Change status in process order

How to see change status of Process order
That means history of status Change
Thanks and regards
LISA

Hi,
For that you need to go for OCM order change managment.
Please refer this link,
[order change managment. |http://help.sap.com/saphelp_46c/helpdata/en/35/ce8d378d0302cae10000009b38f9b7/frameset.htm]
Please refer OSS notes-390635
Please come back for further discussion.
Regards,
R.Brahmankar

Budget Control through User status

Dear all,
I am implementing the budget process through user status as follows
step1 User has to do the Cost planning first, So that time system does not allow to do direct budget allocation through cj30 and stop all the process like Release,PR,PO,GRN FI posting.
Step 2 approval of cost planning by HOD from this process only system allow the budget allocation.
step 3 budget approval by GM, So afer the approval of budget system should allow PR process.
Step 4 Budget Release by MD throuch CJ32 and set the user status budget released,After this status system system should allow all the process like Release,PO,GRN,MIRO,FI posting.
I did all the required configration as per requirement for above process in WBS user status, But my problem is that if suppose MD set the user status Budget released without doing the budget release through cj32 then system allowing all the process because my AVAC is not activited.
Please provide me the solution
thanks
abhijeet

you need to check you budget profile your availability control should get checked against Release budget mostly for overall release ( A/c to your scenario ) . So when you does CJ32 and give budget at that time AVAC status will be on WBS and if you giving less budget in CJ32 system will not allow your approver ( MD ) to save transaction.
Ind. 'Overall' Ind. 'Releases' Avail. control against ...
X X Overall budget released
Make setting shown as below in your budget profile with activation type 1 .
With Regards
Nitin P.

System Status MSPT cannot set a user status

When creating a user status for PM orders (transaction OIBS) we have a user status WOM (waiting on material). The user status profile is assigned to the PM order Object type. We want the user status WOM to be automatically set when the system status MSPT is active. However, there is no business transaction for "missing parts" or "material shortage", etc. How can I get system status MSPT to set a user status automatically?

Marc,
If its not possible by business transaction, then you will need to develop something.
Its pretty straight forward by utilising user-exit IWO10009 and function module STATUS_CHANGE_EXTERN
PeteA

Controlling through User Status

Dear SAP Gurus,
I have the following scenario:-
Status Profile:PROFILE01
1. User status - CRTD
2. User status - REL......................Both with the same Lowest and Highest Number and with same priority and Position
The status pofile is assigned to M2 Notification type.
Now please let me know with these customization already done, how to go about the following:-
1. US - CRTD - is to be active till the Corresponding Mnt.Order is CRTD But not Released
2 US-REL- to be active once the Mnt.ORder is Released.
Please help me out. Thank you very much in advance

hi
while creating the user status ,just doble click on the line which will lead to another screen where you can allow or forbid or set the business transaction .
Assign this user status to the object type notification
make the user status CRTD as Initial and for US REL maintain the set indicator for the required business transaction
regards
thyagarajan

Can I reset a non numbered user status based on a numbered user status?

Can I reset a non numbered user status based on a numbered user status?

Yes. Numbered status are mutually exclusive ie. succeding status resets previously set status.
My requirement is like this: I have 3 numbered status and 2 non numbered status. Lets say, the first numbered status & two numbered status are set at the begining. Now when I click the second numbered status, both the numbered status and two non numbered status should be automatically reset. Only numbered status is getting reset and not the other two.
Thanks
Edited by: Smartsoft General User on Jul 22, 2009 4:36 PM

Function to read status in process order

Hello.
Iu2019m using the function STATUS_TEXT_EDIT to read the status of a process order and I need read the statu in whole phases. Someone know a function to read the status of each phase in a process order?
Thanks in advances

Hello Vivek,
My requirement is much simlar to this this is Status profile below maintain in the System
1     INPR     In Process                          1     10     1     1
2     UNCA     Unsigned - CA Approved     2     10     1     1
3     UNFA     Unsigned - FA Approved     3     10     1     1     ZFAAPPR     RELE
4     SIGN     Signed                          4     10     1     1
5     SICA     Signed - CA Approved     5     10     1     1
6     SIFA     Signed - FA Approved     6     10     1     1     ZFAAPPR     RELE
7     TBCL     To Be Closed     1     10     1     1
8     CLOS     Closed                          1     10     1     1     ZNOAUTH
9     TBCN     To Be Cancelled     1     10     1     1
10     CANC     Cancelled                         10     10     1     1     ZNOAUTH     CANC
11     COMP     Completed                  1     11     1     1     ZNOAUTH
My Requirement is when the status is Close we can set the status to any of the Ten mentioned status as it was maintained in Highest and lowest vlalues here i dnt need alll the status i only need filtered Statues for the Close Status like
In Proces,Unsigned - CA Approved,Signed,Signed - CA Approved,To Be Closed these Status should be active when the Header Status is Close.Can you help me steps involved to achive this
Edited by: posanapalli kiran on Feb 11, 2010 10:08 AM

Mass transaction to revoke status of process orders

Hello,
We need to reopen about 1000 process orders to run a GRIR clearing which is a backlog from former years.
Does anybody know a mass transaction to revoke the status of the process orders other than using the individual transaction COR2? Since we need to change the status twice for every process order back from Complete and from Technical complete a mass transaction would be from enourmous help.
To reset subsequently the status of the process order there exist a mass transaction COHVPI.
Many thanks,
Johannes

Hi,
Did you try KOK4?
Regards,
Eli

PPRT (part printed) System Status for process order

Hi All,
Please help to explain when we get PPRT (Part Printed) and PRT (Printed) System Status on a process order. We are using 4.6 system.
We are printing the shop floor using COPI t-code and system is assigning PRT status for most of the orders. But for some of the orders when it is "Reprint" after couple of time it getting "PPRT" system status.
SAP system still considers the orders with PPRT in the "Original Printout" scenario instead of considering it in "Reprint" scenario.
Please can anyone help to clarify when and why does it happen.
Regards,
Swapnil

Hi,
There are 28 OSS Notes available to address this problem.
Explore with reference to your SAP Version.
Regards,
Siva

Service Order Component User Status

Hello All -
Has anyone successfully tied a user status profile to the component item on the service order? I've added the object type from BS12 and BS02, but I can't find a configuration assignment at the component level. Any help is greatly appreciated!

Hi ,
What i get with your query is that you want to know the user status at component level. I mean to say for example if suppose product has come for repair than at each level of service what is the status of the process at user level you want to know that.you can get that into table crmc_status_proc table. this table is UI filter in order to restrict visibility of status management in the CRM business transaction to the necessary functions there.
Entries in the CRMC_STATUS_PROC table control the following:
Which system status should be displayed in the CRM business transaction?
Which of the system statuses used in the CRM business transaction are lifecycle statuses?
Which system statuses may be set manually in the CRM business transaction?
Which system statuses may be deleted manually in the CRM business transaction?
If a system status may be manually set or reset, which business transactions should be used for setting or resetting?
Should the display or maintenance be restricted to specific business object types?
Which of the system statuses used in the CRM business transaction should be displayed in the toolbars for status maintenance?
Visualization of the system status using an icon
thanks
hemant ghiya

Process order and user time zone

Our system server time zone is CET but we are using EST for user time zone and plant. When we create process orders, the creation date/time is using the server time zone CET.
I understand that in the database, the CET time is used but Is there a way to show the timestamp in the user time zone EST?
Thanks,
Ghislain

Hi Lisa:
We usually let USers maintain their own time zone even though its different from System Time Zone.
When it comes to SAP systems, BASIS usually maintains this and it will most proabably the time in their zone.
And users have their own time zone.
It effects only for support Deelopers who migh tlook at failed jobs in SAP/BW and try to decode them. In this case, they will have to know the differences in TIme Zones, but its not a bog problem.
Ram C.
Message was edited by: Ram Chamarthy

Create APG ( approval granted) status in process order through user status

Similar Messages

Maybe you are looking for