Flash 8 compiler throwing an JSFL error when action scrit code increased

Hi All,
I am facing problm when i publish FLA file in macro media flash 8. It showing an JSFL error.
Anyonw know why it shows jsfl error and how can i solve this issue.
Thanks in Advance
Regards
Subba Reddy

Hi all
by doing some research and development, i found macro media flash 8 throwing an error in Action Script 2.0 when it exceeds code size limt. does anyone how to solve this.
Thanks in Advance
Regards
Subba Reddy

Similar Messages

Flash CS3 Compiler in Strict Mode errors out 1120: Access of undefined property

Hi,
I am following a code example in a book and have the final fla and as files, so I know the project works when fully coded.
This is my problem:
In the book, it tells me I can test the movie to make sure that it is working so far. When I do that, I get the error 1120: Access of undefined property.
The "property" is a component instance. If I take the example completed code and remove everything up to the point I am at, I receive the same errors, so I know it's not a spelling/syntax mistake.
I have a feeling it is the Compiler in Strict Mode. But, when I change it to Standard Mode, then I get error 5001: The name of package 'com.foundastionAS3.ch12' does not reflect the location of this file. etc.
So, in the end, I feel if I can't check my code until everything is completely finished, how do I check it as I am working?
Can someone help?
Thanks.
note:: attached is a file of the compiler when it gives me multiple 1120s.

It's funny. I checked the code from the book, it does not have it imported, but it still works. When I complete the code without the import, it works.
When I do add the import (which is the first thing I did when the errors were thrown) while building the code, it removes that error, but the same 1120's are there. I checked the properties of the components to make sure they are runtime, and also the properties of the actionscript is runtime, so what is it?
All of the more complex examples in the book are throwing these errors while building the code. The problem is, how do I check my code while creating it... That's why when I found this post "http://forums.adobe.com/message/2844566#2844566" I replied.

Error compiling movie. Unknown error - When exporting

Hi everyone.
Exporting movies in Premiere PRO won't work for me. This error shows every time I export movie.
- Source File: C:\Users\addo\AppData\Local\Temp\Merianna_5.prproj
- Output File: C:\Users\addo\Desktop\Sequence 03.m2v
- Preset Used: Custom
- Video: NTSC, 720x480, 29.97 drop frame [fps], Lower, Quality 3,1
- Audio: 192 [kbps], 48 kHz, Dolby Digital
- Bitrate: VBR, 1 Pass, Min 1,50, Target 4,00, Max 7,00 [Mbps]
- Encoding Time: 03:10:33
17.5.2009 21:07:25 : Encoding Failed
Error compiling movie.
Unknown error.
And when i'm opning the same project with CS2 I get this messege when it loads the project.
C:\Users\addo\Documents\Adobe\Premiere Pro\3.0\Meriana.prproj
Video Transition missing: ADBE Dip To White
The format of the movies that I'm exporting is wmv and iv'e tryed exporting into other format like avi or wmv but the same result.
The hardware spec..
Intel Core 2 Duo @ 3.2 GHZ
Ram : 3 GB
8800 GT Nvidia 512 MB
Harddrives : 320 GB + 160 GB
Windows 7 RC1 (Could be the problem?)
Here are the site's that iv'e been shecked.
Error:Error compiling movie
dvinfo.net
Thanks for the help evry one...

That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

Webi report throwing 500 internal error when run

hi all,
when i tried to run one of my report , it is throwing 500 internal error INF; the same does not happen with ohter reports in the same folder.
can someone help on this. I am admin with full rights who is not able to perfom this.
informations:
BO XI3.1 sp3 fp 3.2
bo installed on one seperate server. and hosted on websphere.. and other web deployments made on websphere again.
rgds
shravan

this report is using merge cells and cross tabs which is a bug in the product till XIR3 SP3 FP3.2 so an upgrade to FP3.5 will fix this issue. again. this does not happen with all the reports.
this is the solution given the SAP vendor.
rgds
Shravan

Error when we tried to increase limits for Property of type string

hi,
Actually initially we were getting error when we were trying to add content for property of type string of character length greater than 255.
After that we increase size for that property in pointbase from 250 to 1000 and that works.
But when we tried to increase limit from 1000 to 4000,it was taking only limit upto 1300.
Response needed urgently

Cases can be
1. file name should be in caps (upper case lower case conversion
2. when executing in bg variant not picked
3. collision of file path across servers in a system
In a system there will be servers like in Quality it can have varying servers ex sapqp1 sapqp2 sapqp3
In here qp1 qp2 and qp3 are the servers in quality which can hold the unix data (al11) . If qp2 is directed in your check and if qp2 dosent have the file path it throws error. recently we have faced a similar issue . Problem was solved when basis guys made the setting across all server's to access the path.
Try these options.
Br,
vijay.

Error when executing Java code, java.lang.NoClassFoundError:

Hi, I am new learner in Java Programming and I am using J2SDK and notepad to write a code. I don't have problem in compiling using javac filename, however I received an error when executing using java filename.
The error message I got is Exception in thread "main" java.lang.NoClassDefFoundError: Hello/jawa.
I have verified this simple code - Hello has no issue but somehow it does not run. I even try to compile and execute in other computer also the similiar error returned.
My Client Platform is Windows XP Professional.
I would appreciate any expert can help to suggest me the knowledge/solution to fix this kind of error. Thanks
Jackie

It looks like you entered the command "java Hello.java" or "java Hello/java" (I assumed 'jawa' was a typo.)
You should have entered "java Hello" if your class name is Hello. I am guessing that Hello.java is probably the source code file name. The argument to the java command is the fully qualified class name. "java Hello.java" tells the java command to look for a class named java that is in the Hello package.

Error when reading preview code

While loading images to LR 5 I received the following,
"Lightroom encountered an error when reading from its preview code and needs to quit.
Lightroom will attempt to fix this problem the next time it launches."
Every time I launch Lightroom I get this message. When I click OK, the program closes. Basically can't do anything.
Please help!

You need to trash the preview cache. It’s in the main catalog folder.
Delete the folder with the ending Previews.lrdata
The default location for the Lightroom folder is normally Pictures/My Pictures if you did a standard installation.
Re-launch Lightroom after deleting the Previews folder.
N.B. do not touch files ending .lrcat

Error when launching transaction code CRMBS02

Hello all...whenever we attempt to launch the t-code CRMBS02 or BS02, we get a popup that says:
Error in object editing: This syntax cannot be used for an object name
Selecting the documentation drop down provides:
Message no. TK103
Diagnosis
The syntax of the transferred objects is incorrect. R3TR BSVS made this check.
This could be caused by the following:
The object type R3TR BSVS is unknown
The syntax of the object name is incorrect
The object is a component of a system object
System Response
The function terminates.
Procedure
Correct the syntax.
Any suggestions? When this occurs, it does not enable editing and allows for display only. I have SAP_ALL assigned to the user, so I don't see any authorization errors when I trace the transaction code.
Suggestions?
Thanks in advance!
Joe

Hello Joe,
Tasks template of type T and Workflow Task of type WF, are no more used after release 45b. The were substituted by the TS Templates and by Workflow Template.
Please notes: 114811 -
From release 4.5 onwards only WS/TS tasks can be created via the standard workflow editor transaction however WF tasks created in previous releases may still be maintained. If it is important to be able to create WF flows in release 4.5 then you may still do so with transaction PFWF. This transaction has been removed from the menu to encourage the use of WS flows wherever possible.
A copy utility to copy WF flows and it's components to WS flows will be made available to speed up the transfer to client independent flows.
"Check also note: *152871 Release Upgrade considerations for workflow 3. WS / WF workflows (all releases)
"From Release 3. 1 onwards, it is possible to create customer workflows
of type 'WS'.
Solution: If you have 'WF' workflows, they will continue to run after an upgrade. You can modify them too. However, some of the new features of future releases only apply to 'WS' workflows. See note 114811 for a complete discussion of this subject.
You should pass from T and WF templates to the New WS and TS templates.
1) In relation to workflows of type 'WF' (Workflow Task) and task 'T' they have not been developed since release 40B, instead the Workflow Template (WS) was introduced and Tasks 'TS'. This error has seldomly
been observed in the case of trying to work with WFlow tasks of type WF instead of type WS.
Existing WF will run also in higher releases, however if you change a WF task in a higher release it may produce dumps or numerous errors. This is valid too for Tasks.
Please refers to note 114811.
If you want to change them please copy them first to templates type WS or TS rather than WF or T. Use PFTC in order to copy them and then you can make the changes and you will have much more functionality than type
WF or T.
Additional Inforamtions:
Note 1068627 - Composite note about workflow upgrade
thanks
Willie

Unexpected Error when submitting Claim Code

Hi there. I have tried all instructions on HP site to link printer for HP ePrint. However, when submitting Claim Code I get the message 'Unexpected Error'. Can someone help?.Thank you.

Hi , Thanks for posting in the HP Forums, and welcome! I'd like to help you with the "unexpected error" message you are getting when attempting to submit the claim code for your HP Laserjet Pro M125nw. Are you getting this error message on the HP Connected website when attempting to add your printer? If so try these steps to resolve the issue. Open the HP Connected website in another browser. (For example: if you are using Internet Explorer, try Google Chrome, or FireFox) Remove and re-enable web services on your device to generate a new claim code: Check your printer's IP address.Enter the IP into the address bar of your browser.Select the HP Web Services tab at the top.Select remove web services on the left hand menu.Once web services are removed, click on setup or enable to turn them back on. A new claim code should print.If you are getting the error message when attempting to enable the web services on the printer, try the following steps to resolve the message. Firstly, do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protectorIf that doesn't immediately resolve the issue, I'd recommend downloading the most recent firmware update for your printer here - HP LaserJet Pro MFP M125/M126 Series Firmware Update(NOTE: Make sure the printer is USB connected before running the firmware update utility, as any interruption during the update can cause serious issues) Please respond to let me know if we have resolved this issue!

Built app with Flash Builder 4.6 and compiled for iOS, now error when loading to appstore

I built a fairly simple app using Flash Builder 4.6 and have successfully deployed it to the Android Market (after testing on my own Android device). I have also taken that same app and compiled it for iOS and tested it on my own iPad.
I have then done the release build with the "Final Release for App Store Distribution" option in the release build wizard. I have all the correct provisioning certificates in place and compiled the application to a .ipa file.
At this point, using a MAC, I have run the Application Loader utility to upload my application to the itunesConnect portal to get it in the appstore. I've already gone through the steps of entering the metadata, price scheme, and screenshots in the itunes connect portal, and just need to upload it for review.
When I upload the .ipa file into the application loader, it gives me the following error:
"iPhone/iPod Touch: application executable contains unsupported architecture(s): arm"
Anyone have any idea what this means and how I can fix it? Any help is greatly appreciated!
Thanks in advance!

Solved it. Just added the following in the <InfoAdditions> tag for iPhone in my app descriptor XML file:
<key>UIRequiredDeviceCapabilities</key>
<array>
<string>wifi</string>
<string>armv6</string>
<string>armv7</string>
</array>

Row Selector Checkbox in Report throws "wwv_flow.accept" Error when checked

Hello all,
I ran into some time consuming trouble on
a page of an assistant flow contains a report regions. Users shall select one or many rows from the report.
The checkbox was added as a linked column and formatted as "Simple Checkbox".
After submitting to the "NEXT" page an item :Px_MYEVENTS shall collect the ID column value of all selected rows.
The page process "After Submit" shows:
+:P2_Myevents := apex_util.table_to_string(apex_application.g_f01,';');+
It is expected that only selected rows appear on the item, because we need this for further activities.
On testing strange things happens:
If no selection is done, the target page appears, the item :Px_Myevents contains the values of all rows
When a selection is done, the branch error "wwv_flow.accept" appears, :Px_Myevents doesn't contain a value.
This throws even when the code is used as a DA of type PLSQL - statement or function
How do I get the expecte behaviour?
Edited by: F Lan on 27.09.2012 13:18
Apex Version is 4.1.1 on Oracle 11GR2 XE
Remember the milk ;-)
Regards

Hi,
Always state
<ul>
<li>Apex Version</li>
<li>DB Version and edition</li>
<li>Web server used.I.e. EPG, OHS, ApexListner Standalone or with J2EE container</li>
<li>When asking about forms always state tabular form if it is a tabular form</li>
<li>When asking about reports always state Classic / IR</li>
<li><b>Always post code snippets enclosed in a pair of {code} tags as explained in FAQ</b></li>
</ul>
The following line ought to work they way you want it to , I have used this construct without issues
:P2_Myevents := apex_util.table_to_string(apex_application.g_f01,';');
If no selection is done, the target page appears, the item :Px_Myevents contains the <b>values of all rows</b>This suggests that all checkboxes are being treated as checked.
You need to check why they are being treated as checked. Depends how they are rendered and if they are being manipulated in some way.
The other point to consider is the Processing Point. The above process must run before ApplyMRU/ApplyMRD.
You could try running the form in debug mode to see if it revealing anything in the Debug Report.
The other way is to put it up on apex.oracle.com for someone to take a closer look at it.
Cheers,

Compiler throws "unexpected type" error

Hi,
I am newbie to Generics, I wrote the below program as part of my learning exercise:
=================
class One<T> implements Comparable<? extends One<T>>
     T var;
     public void setVal(T val){
          var=val;
     public T getVal(){
          return this.var;
     public int compareTo(One<T> o1){
          if(this.getVal().equals(o1.getVal())){
return 0;
}else {
return 1;
class Two<T> extends One<T>
     public int compareTo(Two o1){
          // do nothing
          return 0;
class GenTest
     public static void main(String[] args)
          One<String> obj_01=new One<String>();
          obj_01.setVal("Vinayaka");
          One<String> obj_02=new One<String>();
          obj_02.setVal("Vinayaka");
=========
Compilation fails with the below error:
javac GenTest.java
GenTest.java:1: unexpected type
found : ? extends One<T>
required: class or interface without bounds
class One<T> implements Comparable<? extends One<T>>
^
1 error
Can any one please explain me what is wrong with this program ?

You are mixing syntaxes. Your definition should be:
class One<T> implements Comparable<One>(PS: please use code tags when posting code)

Flash pro cs6 gives me an error when I try to convert a simple(timeline only) animation to html5

I installed createjs.zxt from Adobe site via the ext mng Now I get error that createjs panel was not installed. Can someone help please?
Thanks,
Paul.

Hi LisaCrosslin,
Can you please tell me the exact error message that you're receiving when you try to convert a file? And, does the error occur with just one file or several? Please provide as many details as you can, and we will try to get this solved for you.
I look forward to hearing back from you.
Best,
Sara

Using Weblogic JDBC driver 5.1.0sp8 with MSSQL, throwing "abstract method" error when trying to use scrollable resultsets

I am using the weblogic driver with Allaire JRun.
Using these lines, I am trying to make my resultsets scrollable and updatable.
dbConnection.createStatement( ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE
ResultSet rs = queryStatement.executeQuery(query);
When I run the code, I get this error ..
java.lang.AbstractMethodError
at allaire.jrun.sql.ConnectionProxy.createStatement(../sql/ConnectionProxy.java:413)
at com.mindseye.utils.database.DBAccessor.executeQuery(DBAccessor.java:35)
at com.fao.shopping.tag.HandleShoppingCartTag.checkExists(HandleShoppingCartTag.java:635)
at com.fao.shopping.tag.HandleShoppingCartTag.doStartTag(HandleShoppingCartTag.java:90)
at jrun__jsp__shoppingbag2ejsp14._jspService(jrun__jsp__shoppingbag2ejsp14.java:45)
at allaire.jrun.jsp.HttpJSPServlet.service(../jsp/HttpJSPServlet.java:39)
at allaire.jrun.jsp.JSPServlet.service(../jsp/JSPServlet.java:228)
Everything works fine when I do not try and specify attributes to the statement
object. (i.e. dbConnection.createStatement();)
Anybody know what is going on?
thanks,
randy

Hi. I don't see our code anywhere in the stacktrace, but I'll assume
it's there somewhere. The basic fact is that our MS SQLServer driver
implements practically zero of the JDBC 2.0 methods. There is a way
to connect to this driver that has the methods defined, but then all
the difference will be that you'll get an exception saying 'this jdbc 2.0
method not implemented'.
Joe
randy shepherd wrote:
>
I am using the weblogic driver with Allaire JRun.
Using these lines, I am trying to make my resultsets scrollable and updatable.
dbConnection.createStatement( ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE
ResultSet rs = queryStatement.executeQuery(query);
When I run the code, I get this error ..
java.lang.AbstractMethodError
at allaire.jrun.sql.ConnectionProxy.createStatement(../sql/ConnectionProxy.java:413)
at com.mindseye.utils.database.DBAccessor.executeQuery(DBAccessor.java:35)
at com.fao.shopping.tag.HandleShoppingCartTag.checkExists(HandleShoppingCartTag.java:635)
at com.fao.shopping.tag.HandleShoppingCartTag.doStartTag(HandleShoppingCartTag.java:90)
at jrun__jsp__shoppingbag2ejsp14._jspService(jrun__jsp__shoppingbag2ejsp14.java:45)
at allaire.jrun.jsp.HttpJSPServlet.service(../jsp/HttpJSPServlet.java:39)
at allaire.jrun.jsp.JSPServlet.service(../jsp/JSPServlet.java:228)
Everything works fine when I do not try and specify attributes to the statement
object. (i.e. dbConnection.createStatement();)
Anybody know what is going on?
thanks,
randy

Executables throw a widows error when you close the application

I have this problem on several of my labview executables. I can open and runt eh program with no errors. But when I close the program by any method, I get a pop up error in windows. Stating:
"Application Name" has encountered a problem and needs to close. We are sorry for the inconvenience.
I get the option to send the info to Microsoft. Another error pops up Stating the following:
WinsockAsyncSelectWindow: Application name.exe - application error
The instruction at "0x7c90e470" referenced memory at "0x03182a2c". The memory could not be "read". Click on CANCEL to debug the program.
This is really annoying... Anyone know why this error is poping up?

Hi Jason,
Could you please provide us with some more information regarding your executable?
What version of LV are you using?
How are you stopping the executable (stop button? abort button?) You should always use a stop button, not the abort button (the stop sign looking glyph on the toolbar) to ensure that all of your references have been properly closed.
Do you see this performance when running the executable on the development machine?
Do you get the warning every time, or only some of the time?
What all are you doing in the executable? I'd be curious to know if it was something particular to your code or the environment. One way to test this is to build a "dummy" executable--just one that does something as simple as count iterations, and see if you get the message or not.
Please provide a little more information and we'll do our best to help.
Cheers,
Marti C
Applications Engineer
National Instruments
NI Medical

Flash 8 compiler throwing an JSFL error when action scrit code increased

Similar Messages

Maybe you are looking for