Flash 8 On2VP6 Question

My question is a little weird: we do a lot of CD work yet
with video. I wanted to know if I create an executable with Flash 8
for the CD if during playback it uses a Flash 8 player from the
executable or if it uses whatever version player is on the computer
it's running on. I'm hoping it's using the V8 so I can use the
On2VP6 codec for our video in the future.
Thank you for any help!

Flash projectors (executables) are self-contained.
We regularly create executables that contain On2 VP6 encoded
video and they play back correctly even on machines that do not
have the Flash player installed.

Similar Messages

  • How do I reboot my machine when it is flashing a question mark folder?

    How do I reboot my machine when it is flashing a question mark folder?

    Booting From An OS X Installer Disc
    1. Insert OS X Installer Disc into the optical drive.
    2. Restart the computer.
    3. Immediately after the chime press and hold down the "C" key.
    4. Release the key when the spinning gear below the dark gray Apple logo appears.
    5. Wait for installer to finish loading.
    After the installer loads proceed through the installation procedure.  If you are reinstalling Snow Leopard then your hard drive will not be erased.

  • Mac book pro flashing a question mark folder

    What does it mean when my mac book pro is flashing a question mark folder and will not boot

    There are four general causes of this issue:
    1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
    2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
    3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
    4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
    (86432)

  • My old iMac (screen sits on a white dome) opens with a tiny folder that flashes a question mark, instead of a login to user's desktop

    My old iMac (screen sits on a white dome) opens with a tiny folder that flashes a question mark, instead of a login to user's desktop, when booting up after a forced shutdown. How do I get my operating system working again? Thanks --Jim

    The blinking question mark indicates that the firmware could not find a valid Operating System on your machine.
    Your harddrive may have failed. Your filesystem may have be come corrupted.
    Try these things.
    -- try to boot up from the installation disc.
    The startup manager will list all of your bootable partitions then give you a choice of which to boot.  Hold down the option key then power on. Continue holding down the option key until you see the startup manager. This brings up the startup manager. Click on your hd or disc. Click on right arrow key.
    -- Sometimes if volumes don't appear in Startup Manager (what you get when you hold down the Option key at startup), you need to reset the Mac's PRAM, NVRAM, and Open Firmware. Shut down the Mac, then power it up, and before the screen lights up, quickly hold down the Command, Option, P, and R keys, until the Mac has chimed twice more after the powerup chime.
    Then, before the screen lights up, hold down Command-Option-O-F until the Open Firmware screen appears. Then enter these lines, pressing Return after each one:
    reset-nvram
    set-defaults
    reset-all
    "The reset-all command should restart your Mac. If so, you have successfully reset the Open Firmware settings."
    http://support.apple.com/kb/TS1812?viewlocale=en_US
    Should the fail...
    Try taking the battery out for 10 minutes.  Put battery back in.  Cross fingers. Power the machine back on.
    How to eject a cd from the internal cd drive:
    eject cd
    List of devices:
    devalias
    List of variables:
    printenv
    More than you ever wanted to know about open firmware
    http://www.firmworks.com/QuickRef.html

  • Folder w/flashing gray question mark

    Hello,
    I have tried every and all the suggestions given here for when all that shows is a folder with a flashing gray question mark.  I was told that the reason for the flashing question mark is the hard drive is no longer working.  I have a lot of things on my computer and would like to make a back up of them, before I have it repaired. Is there anything else I can try to be able to reboot it and get all my files out of there? I'd appreciate any help or suggestions.  Thank you very much!

    Aqua
    Re: Folder w/flashing gray question mark 
    Feb 1, 2013 1:52 AM (in response to Arranques)
    Pram Reset shouldn't do that.
    How to use FireWire target disk mode...
    http://support.apple.com/kb/HT1661
    http://en.wikipedia.org/wiki/Target_Disk_Mode
    Can you or I be more specific?
    I know how to set up to get to the T mode.  What I'd like to know is, once I'm there, what is it that I'm supposed to do?  And can I be more specific about what? I just looked at the disc I inserted to be able to startup, and it is Tiger.  So the OS is Tiger and did have the computer partition. I had Tiger on one side and Leopard on the other.  I know, it keeps getting more complicated as I go along. Thank you for the links.

  • White screen with a flashing folder & question mark

    My IMac froze today and when I turned it off and then back on, it just sticks on a white screen with a flashing folder & question mark...  Help?

    Reinstall Snow Leopard without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    Reinstalling Lion Without the Installer
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Startup stuck on a Flashing Folder/Question Mark

    Aloha,
    I have been looking for a solution to my problem for several months now and have never found a solution.
    One day my computer froze so I forced a shut down by holding the on/off button.
    When I turned on the machine again the folder/question mark appeared.
    I have tried all the hot keys.
    Option-only shows the refresh and forward buttons but no options.
    I thought my hard drive failed, so I bought a new one and installed it.
    When I placed the OS DVD in to install a fresh copy I still got the flashing folder/question mark.
    I don't know what to do, any suggestions?

    sione wrote:
    I don't know how to get to the system preferences if i can't get past the flashing folder/question mark.
    Correct you'll not be able to...
    The question mark appears when the boot loader cannot find a valid OS system/partition.
    Here is what I would try:
    1. Boot from the OSX installer by inserting the disk into the Mac then power-off. Power-on the Mac and immediately press and hold the "C-key" until you get the installer Language screen. Select your language and continue. The next screen should be the Welcome screen, go to the top and select Utilities/Disk Utilities from the tool bar. Once Disk Utilities is open select your internal (if it appears) then select the first aid tab. In the first aid pane select to run "Repair disk". If "Repair Disk" results in errors then run it again until it reports no errors found. Once "Repair Disk" is complete with no errors then press and run "Repair Permissions". Once complete reboot to test the Mac.
    2. If the above does not work then try booting with the Startup Manager, by pressing and holding the "option-key" during boot. The GUI Startup Manager will appear and you can select the drive you wish to boot from.
    3. Alternately press the "X-key" during boot.
    4. And lastly before we give you the bad news... make sure that the mouse or track-pad button is not being pressed or stuck during system boot.
    If none of these works then you most likely have a bad drive. And you'll need to replace it. You do have a back up right?
    Do you have another Mac, to use for troubleshooting?

  • Installed Leopard, boots sporadically - Flashing Folder / Question Mark

    I have installed Leopard onto my PowerMac G4. It was working for a few months, now it won't boot up most of the time. I am getting the flashing folder/question mark when I turn the computer on.
    This problem doesn't occur all of the time. I was messing around with the two internal hard drives, switching them around inside the machine, and whatever I did must have worked because the computer booted up just fine. All of my files were in tact and everything looked normal. This lasted for about a day. Now my computer is back to the flashing folder on startup.
    What could be causing this problem, and how can I fix it? Thanks!

    Thanks for helping me, I really appreciate it.
    It is the strangest thing. Sometimes it will recognize the hard drive and boot up normally. Other times it hangs on the Apple logo with the spinning wheel. And other times it doesn't recognize the drives at all and gives me the flashing folder. Same thing when I try holding down the option key and use the device manager. Sometimes it will see the drives, and other times it doesn't show anything.
    I have replaced the hard drives, the hard drive cables and the PRAM battery. I am running out of ideas! Anything else that you can suggest would be greatly appreciated.

  • Flashing Folder/Question Mark on Startup

    I have been having an issue with my machine for the past couple days, and cannot find the Install Disks to remedy this situation (my OSX 10.4.4 disks will not recognize), so ANY help would be appreciated.
    I have been able to troubleshoot using FireWire target disk mode. I've run DiskUtility and DiskWarrior on this machine from another machine and everything checks out with the hard drive, but I keep getting the Flashing Folder/Question Mark on Startup. Safe boot (Shift key at startup AND Shift-Command-V) do not work. Resetting the NVRAM / PRAM does not work.
    Suggestions?
    I don't need the info on the machine, as I am trying to set this up fresh for my wife.

    But I was going on the assumption, as it was an internal drive (not an external data only drive), he had an OS installed, since his problem seemed to be that out of the blue he was getting the flashing folder question mark on startup. He had written +"I have been having an issue with my machine for the past couple days...."+ implying that it had booted normally before that.
    Anyway, you're probably right; I'm just puzzled: how would his once bootable OS disappear just like that? Obviously something I'm not understanding here.

  • Flashing folder question mark on boot

    I started my computer today, and I hear this high-pitched noise and then clicking sounds. Then I see the flashing folder question mark. Could this be hard drive failure? Or is it the DNSChanger virus? I've tried to access the Recovery, but Command-R and the Option key don't work. When I use Option, all I see is a white screen with a pointer.

    Compukid wrote:
    When I tried Option, it showed a white screen and the cursor.
    That's the firmware driven, no drive means either OS X is fried and can't boot, or the drive is dead, or it may be that something is wrong with the Mac or a cable, which if the drive is still good, will work later or in a SATA to USB adpater on another Mac or PC with MacDrive installed. You won't know that unless it's pulled out of the machine.
    When I tried to move the mouse (a wireless one, if that helps), it did not move.
    Can't use a wireless mouse, as the drivers load with OS X and OS X isn't booting, use the wired one or the trackpad.

  • Flashing gray question mark after 10.5.8 update?

    This isn't so much a post to ask for help, as it is just trying to see if anyone got the same result and what you had to do to resolve it.
    Yesterday I updated to 10.5.8 and it did it's install and then restarted the system. Upon restart, it did the initial start-up charm and then loaded up to a gray screen with a flashing folder icon with a question mark on it.
    I called Apple support and we walked through repairing the disk with the disk utility, so on and so forth, and I'm still stuck with the same screen. The support agent says the next step is to fully reinstall the OS X...
    So that's my next step. I'm currently waiting for a friend of mine with a MacBook to come over so I can put my iMac into Target Disk Mode and pull some files before deleting everything.
    Anyone else?

    You may not need to erase your drive. See:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Apple tv shows flashing white question mark on screen. What is this?

    Apple tv screen has white flashing question mark, what do I do?

    Just come across this thread as my 160Gb AppleTV had the same problem this evening. The LED on the front was flashing orange and white repeatedly as well. I just turned off at the mains and switched back on and am now watching a film, everything ok.

  • Flashing ? Question mark when mac turned on

    hi,
    i just switched my mac on to find a flashing question mark and no access to my system....
    I have followed some of the other posts on this topic and completed the suggested remedies....but they have not worked...
    thing is i ran verify disc and repair disc and both reported to be ok...drive is mounted...i use time machine as my back up so should i just restore the system from the most recent time machine back up? will my system be restored exactly the same or as recent as last back up??
    Cheers,
    b.

    I've been testing out TM at home and work using myself, some of my co-workers, and a few lab machines as guinea pigs. Overall I've been impressed with it but I've seen some issues that give me pause and one of them is what I'm coming to think of as a 'cascade of errors' where a an issue develops and slowly gets worse before we realize it - and all the time TimeMachine is backing them up. So when we use TM to recover the drive we wind up recovering all those errors. Since I don't know exactly what TM does in regard to backing up System and Library files and caches, I don't know if my assumptions are right or not...but it leaves me unprepared to entirely trust TM for the 'big one'.
    So, I'm continuing to use TM - and it has saved me. A sudden drive failure occurred less than 30 minutes after my last TM backup and after restoring the next day I was 100% back up and running having lost just a few edits of a picture I'd been working on. But I'm also doing two clone backups - one that is one system update behind and another that I update more frequently.
    Can't say why your TM backup didn't work 100% and I don't know if an Archive and Install will fix it. I will say though that Adobe products will probably have to be reinstalled and Office might need to be uninstalled and then reinstalled. Both are rather touchy and I generally do a reinstall of both after an Archive & install. While it isn't a fix-all, I'd think permission repairs would also be in order. Also - did you use Migration Assistant to restore the drive or did you use the TM interface? If the latter, that might be the problem. Lots of programs, Adobe and Office included, place and need files that are in the global Library.

  • FlashBuilder and Flash AS3 question

    I'm heads down working with the FlashBuilder tool which is heavy AS3, and have used Flash CSx for years.
    My question: I'm assuming my AS3 skills that I develop with FlashBuilder will be directly applicable to Flash CSx, correct? I understand I'll need the context of applying my AS3 code to the Flash objects when working in Flash CSx but for the most part will my AS3 skills carry over from FlashBuilder to Flash CS4/5?
    Thanks in advance,
    Rich

    AS3 knowledge and skills has nothing to do with editors/IDE (which CSx, FlashBuilder, etc. are) per se. So, once you get your hands on AS3 - it doesn't matter where you write your code - it will work the same way in the final compiled swf. Nevertheless, there is a learning curve involved while getting to know new development environment as with any new software.

  • FYI: Getting support for Flash PLAYER questions

    This is the general forum for Flash authoring. If you have a
    question about installing Flash Player, or it's performance, or
    anything else that isn't related to developing content in Flash
    authoring, please post it to the Flash PLAYER forum!
    Go straight there:
    http://www.adobe.com/cfusion/webforums/forum/categories.cfm?catid=184&forumid=44
    Or find it under "Read and Player forums" at
    http://www.adobe.com/support/forums/

    Hi Bentley,
    I just noticed something. The link that I pasted, to your
    post, does not work either. I noticed why, however, and it seems to
    be why the link in your original page does not work, and why the
    link in my post that goes to your post does not work.
    It seems to be that if a link has a period after it (i.e., if
    it is at the end of a sentence), the period is incorrectly included
    in the "real" link. Somehow, whatever mechanism that processes the
    post has a mini bug in it.
    If you go to the link that is results in "Sorry, this page is
    not available", and look up into the browser address bar, you will
    see the period there each time.
    I just thought that I would point this out, too, so that the
    web techs in charge of the workings of the forums could look into
    it.
    Here is the original link, without a period after it, to your
    original page.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1400586&enterthread=y
    Thank you again,
    Karen

Maybe you are looking for