Flash animation extending out of the SWF movie into the 'non-flash' areas of the browser

Hey Everybody --
So I was on myspace and I couldn't help but to notice that
one of the flash animated ads they were running had butcher knives
(it was for some horror movie) coming out of the movieclip and into
the browser. Does this make sense? Has anyone else seen this
awesome special effect yet? I have been trying to find information
on how to do it, I assume it is new in Actionscript 3 am I correct?
I can't find anything on it, not even a tutorial but then I don't
quite know what to search for either.
Can anyone explain how to do this or know what this special
effect is being called/what I should search for?? Can anyone direct
me to a tutorial or any information at all, I would greatly
appreciate it.
Thanks!

check dhtml and transparent flash.

Similar Messages

[svn:osmf:] 13888: PARB feedback: Remove ContentElement and ContentLoader, refactor common image/SWF code into a non-public utility class.

Revision: 13888
Revision: 13888
Author:   [email protected]
Date:     2010-01-29 11:44:20 -0800 (Fri, 29 Jan 2010)
Log Message:
PARB feedback: Remove ContentElement and ContentLoader, refactor common image/SWF code into a non-public utility class.
Modified Paths:
    osmf/trunk/framework/OSMF/.flexLibProperties
    osmf/trunk/framework/OSMF/org/osmf/image/ImageElement.as
    osmf/trunk/framework/OSMF/org/osmf/image/ImageLoader.as
    osmf/trunk/framework/OSMF/org/osmf/plugin/DynamicPluginLoader.as
    osmf/trunk/framework/OSMF/org/osmf/swf/SWFElement.as
    osmf/trunk/framework/OSMF/org/osmf/swf/SWFLoader.as
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/image/TestImageElementIntegration.as
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/image/TestImageLoaderIntegration.as
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/swf/TestSWFElementIntegration.as
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/swf/TestSWFLoaderIntegration.as
    osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
Added Paths:
    osmf/trunk/framework/OSMF/org/osmf/swf/LoaderLoadTrait.as
    osmf/trunk/framework/OSMF/org/osmf/swf/LoaderLoadedContext.as
    osmf/trunk/framework/OSMF/org/osmf/swf/LoaderUtils.as
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/content/TestImageOrSWFElementIntegratio n.as
Removed Paths:
    osmf/trunk/framework/OSMF/org/osmf/content/
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/content/TestContentElementIntegration.a s
    osmf/trunk/framework/OSMFIntegrationTest/org/osmf/content/TestContentLoaderIntegration.as
    osmf/trunk/framework/OSMFTest/org/osmf/content/TestContentElement.as
    osmf/trunk/framework/OSMFTest/org/osmf/content/TestContentLoader.as

Extend out-of-the-box script for Publishing Vendor to ERP.

Hello Experts,
We are using ESO 5.1 SP9.
I would like to now how it's possible to modify the out-of-the-box script that publishes the vendor to ERP (this script actually generates an XML file). Current client wants to add more fields that are required in their SAP backend system.
I've already created the extension fields so this information can be captured by the vendor in ESO system. Now I need the information found on these fields to move to the XML file so PI module can process them to ERP.
Only thing I found was through Setup-> System Setup -> Integration -> Script Definition -> Publish Supplier.
Script is as follows:
import com.frictionless.sap.integration.exporter.FileExporter;
FileExporter exporter = new FileExporter(doc);
exporter.process();
Your help is greatly appreciated.
Thanks!

Hello Guys,
I was trying to replicate this in version 7.0 for master agreement's extensions.
I've enabled the extensions in the Integrated Document Configuration for the class
contracts.Contract.
Is there anything else that I should set/configure to get this working? I'm looking the XML file that is being sent to PI and the extensions are not there.
Thanks!
Robert

Best animation program out of the CC programs?

I understand that Adobe has programs like flash pro, after effects, etc, but what is the absolute best and core animating program from the CC arsenal?

Each of them can be the "best" for a specific type of animation, so on a general level your question doesn't really make sense. Character animation has different requirements than visual effects, creating animated GIFs or web animations is different from broadcast work, you know...
Mylenium

Placing SWF Movie into IDCS4 for export to PDF

I'm trying to place a swf into an Indesign document for export to PDF.
I made a simple swf using Flash CS4 (AS2 if it matters) and placed it using the File->Place menu.
I checked the Movie Options and selected, Embed in PDF, and play options.
Then I export to PDF and am sure that Interactive Elements is checked.
I found someplace that suggested toggling "create tagged PDF" to the opposite setting of whatever it is, but that didn't make any difference.
When I open the PDF with Acrobat and move to that page it just shows the default movie preview and shows a "buffering" window for ever, but the file is tiny so it should load immediately.
So how do I do this? Is it possible? I've tried some searches, but most everything I'm finding is about exporting ID docs to swf. And that isn't what I want.
At least I don't think this is what I want. I need to make a PDF that will have an animation of how to navigate a web app. So if anybody has a better way to do this, then please let me know!

I wrote up a very long explanation of this for indesignsecrets.com.
http://indesignsecrets.com/putting-swfs-into-indesign-documents.php
The bottom line is:
It's a bug on the Mac
Windows users can play those SWFs but the Mac hangs
Adobe is aware of the problem
But if you want an SWF to play on both Mac and Windows, open the PDF in Acrobat Professional and add the SWF there.
You will actually have more control than if you had placed it in InDesign and it played correctly.

How to add a swf movie into a frame?

Hi guys. I have a pop up box that loads when a button is
pressed. Within the pop up box I have placed a small swf file from
the library. But when I preview this I only get a black outline
where the swf file should be. Can anyone tell me what I am doing
wrong?

Is the movie in your library, and is the linkage set up to
export for actionscript? Right click on the item in your library
and select Linkage and check the this is checked. Remember that you
have to reference the movie by it's Linkage ID, not symbol name.
Unless you already have the item on the stage in the swf, in
that case, you may have a stop in it before it can play. Sometimes
it's a simple thing :)

I am trying to get the most speed out of the browser, instructions say to type about:config in the address bar and hit enter, I did this. It now says to rt. click, from the menu select "New" then "Integer", I cannot find "New", I need better directions.

when I typed in about:config in the address bar and hie enter, what appeared looked like a lot of files, pages of them, I didn't know where to right click from the menu select "New"

Which prefs to you want to change?
It is not recommended to change prefs in order to tweak some settings.<br />
Do you have specific problems?

The message box on email is extending out of range. This is not happening on other browsers. How do I fix?

I recently installed FireFox on the laptop. The email inbox message area is not performing properly in that the message is extending out of the boxed area and cannot be viewed without scrolling across the bottom bar. I am also seeing some messages overlapping in the message box and not being aired properly. Ths is NOT happening in other browsers - i.e. googlecrhome or explorer. It is also not occurring on my desktop, only laptop. Please advise who can assist me with this glich - Mozilla, optimum.net or laptop manufacturer (Sony Vaio). Many thanks.

If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*http://kb.mozillazine.org/Websites_look_wrong
*https://support.mozilla.org/kb/Websites+look+wrong
*https://support.mozilla.org/kb/Changing+fonts+and+colors
It is better not to increase the minimum font size, but use an extension to set the default page zoom to prevent issues with overlapping text.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Swf movies playing back 1/2 the original speed

I have a multimedia cd exported as an .swf. Inside of this I
have a 'movie viewer' that loads external .swf movies into the
project via 'tell target' command. I have roughly 20 movies that
work fine, but for some reason the new ones I made are running at
2X the speed inside the player. However, they run perfectly on
their own though.
The main swf is at 23 fps. I have adjusted the external
movies to 1, 6, 12, 23, 30 fps and get the same 2X speed every
time.
Has anybody ever heard of this happening before? Are there
any solutions to this?

Thank you for replying and sorry it took so long to respond. Now I can't get into my Verizon email so I didn't know I had a response on this site. I was also physically unable to sit at my computer. Here is the info you requested:
Transceiver Revision: 7.2.3.0 Vendor ID Code: 4 Line Mode: G.DMT Mode Data Path: Interleaved Transceiver Information Downstream Path Upstream PathDSL Speed (Kbits/Sec) 864 160 Margin (dB) 20.5 31.0 Line Attenuation (dB) 44.5 29.0 Transmit Power (dBm) 3.3 11.1
on 8/15 I had the slowest download speed yet of 0.17 mbps! I am paying for 1.1-3mbps. My modem is 6 or 7 years old. I'm not sure if I mentioned the last 2 sentences before.

Robohelp 10 & scalable SWF movies

Hello everyone!
I've inserted *.swf movies into my topics, and pubished a browser based help. The issue I'm having is the videos stay their default size no matter how I resize the browser.
I have edited the HTML to
<object id="object1" data="Navigate A.swf" type="application/x-shockwave-flash"
style="border: none;" width="100%" height="100%">
<param name="movie" value="Navigate A.swf" />
<param name="quality" value="high" />
</object>
however when I do this the movies shrink to a super small size, and don't resize at all.
Any ideas on how to get my movies to scale when a user resizes their browser?
The main reason I need to do this is to accomodate for users' different screen resolutions.
Thanks in advance!
Jerry

**UPDATE**
I figured it out, the SWF publish settings wouldn't allow it. Nothing to do with RH10. Everything to do with Captivate 6...

Can I import Director movies into Flash?

Hi,
Can Flash handle Director movies? I am making a presentation
of my artworks in Flash environment; I have both Flash and Director
movies. I know that I can import all my swf movies into Director
MX2004 to create a standalone projector and play both swf an ddir
movies. Does it work for the reverse?
Thanks
Uti

No, you can't import or display Director movies in Flash in
any way. Best
you can do is launch the Director executable from the Flash
movie, though
how you do this depends on which version of Flash you are
using.
Remove '_spamkiller_' to mail

MBP 17" 2010: horizontal lines extending out from open windows on 30" ACD?

I have a mid-2010 17" I7 with anti-glare screen. The topcase was replaced for factory damage and now the screen was replaced by Apple here in Paris, where I live. I use the MBP with a 30" ACD at home, with no problems until I picked up the repaired MBP yesterday with new screen. I now notice that when I open a window, like Safari or Mail, the lines (let's call it the lower line that frames the menu bar in grey on the top of each open window) seems to extend beyond the open window and run across the top of the entire 30" display. If I move the window, that line moves across the screen with it. It doesn't occur on the MBP screen itself, only on the attached 30". So that if you open Safari and place it in the center of the external display, you see the line running from the grey menu bar on top of the window extend out in both direction across the entire display. It has no effect within the windows you are looking at all, but this wasn't there, or I never noticed it before. I changed the desktop background to see if it changed, and basically not, except it is not viewable so much with light or white background.
There is no effect within the windows being viewed. It's as if the line running out from the frame of the window, especially the bottom part of the grey menu bar on top, are extending out across the screen.
Any suggestions would be greatly appreciated.

It turns out that I tested my 30" ACD with a friends Macbook and it has the same phenomenon. It's quite strange. The darker the blue or grey the more this line flows out from the grey bar frame on Safari or Mail windows. The smaller the window the less evident the phenomenon. Again, it has no effect on the windows themselves, and only occurs toward the top of the display. When you move the window down on the screen it disappears. And it is only the line below the grey upper bar that is rather bold that bleeds out across the screen.
I wonder if there is a way to reset the display or move to some default setting that would correct this.

Advanced Photo Album SWF Movies Playback

Hello
I linked an .swf movie into the Flash CS5 Advanced Photo Album template and have found that if I press the "next" button, the movie continues to play. You can't go back to it.
Does anyone have a tip to stop a .swf movie when I proceed to the next one?

Hello
I linked an .swf movie into the Flash CS5 Advanced Photo Album template and have found that if I press the "next" button, the movie continues to play. You can't go back to it.
Does anyone have a tip to stop a .swf movie when I proceed to the next one?

SWF Movie Won't Load in Preview Mode?

Hey, I'm new to all of this, but when I put my .SWF movie into my website as an advertisment banner, but when I open it in preview mode, it just doesn't load. Why is this?
Here is the code for it (I think):
<tr>
    <td height="404" colspan="2"><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="550" height="400" align="middle" id="FlashID">
      <param name="movie" value="../Ad Banner.swf" />
      <param name="quality" value="high" />
      <param name="wmode" value="opaque" />
      <param name="swfversion" value="6.0.65.0" />
      
      <param name="expressinstall" value="../Scripts/expressInstall.swf" />
      
      
      <object data="../Ad Banner.swf" type="application/x-shockwave-flash" width="550" height="400" align="middle">
        
        <param name="quality" value="high" />
        <param name="wmode" value="opaque" />
        <param name="swfversion" value="6.0.65.0" />
        <param name="expressinstall" value="../Scripts/expressInstall.swf" />
        
        <div>
          <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
          <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
        </div>
        
      </object>
      
    </object></td>
</tr>
Any help or suggestions would be useful, as this is for my school coursework. Thanks in advance!

It would be best to post a link to a live test page online.
If you mean while being previewed in a browser, which one(s) are having the problem with?

Importing Director movies into Flash

My short Q, which I suspect is a FAQ though it doesn't appear
on the Director or Flash FAQs on the Macromedia (sorry, Adobe ;-))
site, is: how can you import Director movies (source .dir, or
published .dcr) into a Flash movie?
I had thought this would be simple, that Flash would have an
import filter for Shockwave movies, as after all both products come
from the same stable and you can import .swf movies into Director,
but not so, at least in my copy of Flash 8. Neither can Director
export as a .swf - the only export format that might just work is
.avi but I'm damned if I want to create a big video file just to
reuse a snippet from a Director movie. I did a quick Google search
for DCR->SWF converters but couldn't see anything obvious to
use.
The reason I'm bothered about this is that we've produced a
lot of e-learning material in Director (a good third of our
learning objects at
http://www.nottingham.ac.uk/nursing/sonet/rlos/rlolist.html
use Shockwave movies) and although we've now moved on to Flash,
occasionally we want to be able to reuse snippets from Director
movies in Flash movies. It would be disappointing, to put it
mildly, were we not able to move content between software
applications produced by the same company...
TIA for any answers/suggestions.
Cheers
Fred
School of Nursing, University of Nottingham

I feel your pain an don't know what's going to happen with
Director now that Adobe is involved.
You mentioned that you could export as avi, could you copy
the scenes in which you want to use into a new director file,
export that as an avi and conver t that to an flv?
Just a thought.

Flash animation extending out of the SWF movie into the 'non-flash' areas of the browser

Similar Messages

Maybe you are looking for