Flash Banner to URL
Hi i'm making a banner which consists in 3 images (one at a time)
each image have a duration of 10 seconds and then the other image is shown.
(1st img ...10secs...--->2nd img ...10secs...--->3rdimg...10secs...--->1st img AND SO ON
for this I lower the frame rate to 10fps and left 100 frames between each image
- Is there a code or something to do this without so many frames? (I'm using AS 3.0)
- I also want it to pause if the mouse is over and to resume playing when its out
- and finally I want each image to send me to a different URL if i click them
ex: if I click img1 send me to www.url1.com / if I click img2 send me to www.url2.com/ and if I click img3 send me to www.url3.com
Hope someone can help
THANKS
P.S.: Im using Flash CS4 & AS 3.0
You may use a timer:
place on one banner into each frame. If you have 3 banner you must have a 3 keyframes with 1 banner into if.
set this code into the time line
stop();
var timer: Timer = new Timer( 10000, 0 );
timer.addEventListener( TimerEvent.TIMER, ontmr );
function ontmr( evt: TimerEvent ):void
if ( currentFrame < totalFrames )
gotoAndStop( currentFrame + 1 );
else
gotoAndStop( 0 );
timer.start();
To make it a link - into clip of every banner set this:
buttonMode = true;
useHandCursor = true
addEventListener( MouseEvent.CLICK, onClick );
function onClick( evnt)
navigateToURL( new URLRequest( "http://www.google.com" ), "_self" );
Similar Messages
-
Integrate Flash banner in Flash website?
I'm building a portfolio website for my design work. The whole website is Flash based.
I have a Flash banner that I would like to add to the website but I can't seem to place it on stage.
Is there a way to stream the banner? If I do that, how do I place it's location on stage?
Thanks!Assuming that you are making the Flash website, just use a loader to load the .swf file and add it to the stage, like you would an image:
pseudo code (meaning that im just typing from memory, so it should work but might have an error)
var myLoader = new Loader();
var myBannerUrl = ("bannerFolder/banner.swf"); //full url OR path relative to the file loading it.
myLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, addMyBannerToStage);
//to be thorough, an error listener and posibly a progress listener would be useful
myLoader.load(new URLRequest(myBannerUrl));
function addMyBannerToStage(event:Event):void{
myLoader.contentLoaderInfo.removeEventListener(Event.COMPLETE, addMyBannerToStage);
var myBanner = myLoader.content as MovieClip; //if you want to access its functions/vars etc like any movieclip
myBanner.x = 0; // x position
myBanner.y = 0; // y position
addChild(myBanner);
HTH
-Ted -
I am helping with the migration of www.auntiesbeads.com. We are moving to a new platform and have a flash banner on the home page that will be changing frequently with new promos, etc. You can find the flash banner at http://auntiesbeads.3dcartstores.com/. I need to be able to update the swf file and have it immediately reflect on this new home page, but it only seems to be updating on the non-secure URL in Firefox and not at all in IE. Please Help! Thanks
I never could get the older v10.x series to update by themselves. Get Flash direct from the source and update manually. The latest version is 11.5.502.146
http://get.adobe.com/flashplayer/
This version does self-update successfully. -
Hi All,
I am facing a weired problem in my webpage.
I am having a html page, which embeds the windows media
player object and one banner ad. This banner ad i am getting from
another vendor.
In my page i have to call this ad like the below code.
<script language="JavaScript" src="
http://mythridpartyvendorsite.com?...">
</script>
and I have a media player that code in html as follows.
<SCRIPT LANGUAGE="JavaScript">
document.write ("<OBJECT id='videoFrame_Player'
classid='CLSID:6BF52A52-394A-11d3-B153-00C04F79FAA6' height='300px'
width='400px' type='application/x-mplayer2' viewastext>")
document.write ("<para name='url' value
='http:myurl.com'>)
..............................other parameter etc
</script>
When the expandable banner ad runs in this page. When I
mouseover on the "AD" that will expand. when I click the close
button of the "AD" it stops my windows media player.
I am not sure why its happening and how its happening.
Because I flash banner ad comes from some vendor.
I did some research on this. I think when these ad trying to
communicate to the posted server, looks like its stops my media
player. Is this related to any security on flash?
If someone knows or comeacross this issue. please update me.
This is really helpful for my page.
Thanks.Hi,
Are you talking about the Mercedes leaderboard ad? Because that look a lot more complicated than "fade in - fade out" images?
Anyway... I am looking at the easiest way to create a banner ad with fade in - fade out images that I have created in illustrator.
This tutorial helped me alot.
http://www.youtube.com/watch?v=gFw-1D8yaMs&NR=1
cheers -
hello everyone!
I have a nasty problem: the flash banner I designed doesn't
perform the way it should. Once customers are clicking on it, it
doesn't take them to the url. Is there a setting in Flash which
needs to be "on" or action script? The banners are part of some
networks I have no idea about. Please advise something!
KatyaYour actionscript should look something like this:
btnName.onRelease = function(){
getURL("
http://www.mysite.com","_blank");
} -
Space issue in Firefox related to Flash banner
I have a website with validated XHTML and CSS that displays an unwanted space only in Firefox under a Flash banner. The site has been tested in IE6/7/8, Firefox, Chrome, Safari, Opera, AOL, and Netscape. Firefox is the only problem. After posting this issue to Experts Exchange, it was determined that the code Dreamweaver generates to insert Flash causes the problem. An expert on that site originally thought there were two instances of the object and removed what handles IE. The site then displayed correctly in all other browsers, but would continuously try to load the Flash file in IE. Obviously, that is not the resolution. I have tried inserting various IECCs without finding the right combination. -- The live site is http://www.imfgsol.com. The test page that contains code suggested by Experts Exchange is http://www.imfgsol.com/default2.html -- I would great appreciate any help resolving this issue!! Thanks!
Thanks so much for your help! Adding the param, removing the IECCs, and correcting the tag closing resolved the issue. The http://www.imfgsol.com/default2.html page now loads in IE 6/7/8 and validates.
For anyone that might have this issue, following was the problem and resolution:
When inserting a Flash banner using Dreamweaver, the following code was created:
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="963" height="113" class="imgpad" vspace="0" id="FlashID" title="Innovative Manufacturing Solutions">
<param name="movie" value="images/IMSbanner.swf" />
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />
<!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
<param name="expressinstall" value="Scripts/expressInstall.swf" />
<!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
<!--[if !IE]>-->
<object data="images/IMSbanner.swf" type="application/x-shockwave-flash" width="963" height="113" vspace="0">
<!--<![endif]-->
<param name="quality" value="high" />
<param name="wmode" value="opaque" />
<param name="swfversion" value="6.0.65.0" />
<param name="expressinstall" value="Scripts/expressInstall.swf" />
<!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
</div>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
The display was fine in all browsers other than Firefox. In Firefox, an unwanted space was created due to the way it read the IE code. The space below the banner is illustrated here:
By removing the separate objects and IECCs and adding the param as suggested, there is no longer a space in Firefox and the display is correct in IE 6/7/8, Firefox, Chrome, Safari, Opera, AOL, and Netscape. The code that works correctly is:
<object data="images/IMSbanner.swf" type="application/x-shockwave-flash" width="963" height="113" vspace="0">
<param name="movie" value="images/IMSbanner.swf" />
<param value="high" name="quality" />
<param value="opaque" name="wmode" />
<param value="6.0.65.0" name="swfversion" />
<param value="Scripts/expressInstall.swf" name="expressinstall" />
<img width="112" height="33" alt="Get Adobe Flash player" src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" />
<!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
<div>
<h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
<p><a href="http://www.adobe.com/go/getflashplayer"></a></p>
</div>
</object> -
How do I make my flash banner change frames on a timer?
Hello, I'm new to flash and I recently just made a flash banner where you can click buttons to change frames. I also want to add the ability for it to automatically change frames after 7 seconds. I've put all of the pictures on the same frame and gave them frame labels. What would be the actionscript code I should use to make this work, along with making the buttons still functional? Also, how can I put buttons to go to the last frame from the first, and first to the last, while still making them stop at every frame? I keep trying and nothing's working.
If you'd like a more in-depth look, I've provided the .FLA file here:
http://uppit.com/v/ZJOKIQ59
The easiest way to explain it would be to re-upload an .FLA file with all of the above completed bug-free, and show me how you did it. I hope I'm not asking too much with that, but I would be able then to take a look at it and compare it to my code to learn it myself.
Thanks in advance for any help! =]Well I done some more work this time. As i had some problems uploading files I'v made these screanshots.
- On the first frame add just this:
var secTimer:Timer=new Timer(1000,7);
startTimer();
- The actual code is on the second frame:
//secTimer.addEventListener(TimerEvent.TIMER, tik);
secTimer.addEventListener(TimerEvent.TIMER_COMPLETE, skipFrameT);
next_btn.addEventListener(MouseEvent.CLICK, playNextFrame);
function playNextFrame(e:MouseEvent):void {
if(currentFrame < 50){
resetTimer();
play();
else{
resetTimer();
gotoAndPlay(2);
prev_btn.addEventListener(MouseEvent.CLICK, previousFrame);
function previousFrame(e:MouseEvent):void {
if(currentFrame <= 11){
gotoAndPlay(42);
else{
gotoAndPlay((currentFrame-10));
resetTimer();
/*function tik(e:TimerEvent):void {
trace("frame ",currentFrame,", tick", secTimer.currentCount);
function startTimer():void {
secTimer.start();
//trace ("timer Started");
function skipFrameT(e:TimerEvent):void {
//trace ("time stoped");
if(currentFrame < 50){
play();
else{
gotoAndPlay(2);
resetTimer();
function resetTimer() {
trace("Timer Reseted");
secTimer.reset();
startTimer();
- Remove your code for the buttons;
- And use 10 frames spaceing for the images:
2 to 11; 11 to 21; 21 to 31... and so on.
Hope this will be real help now. -
Problem with a flash banner in a php includes
I am creating a site that has many pages and I made an includes file for the header of the page that contains my navigation bar, i then made a template of the page to use for all my pages.
Now I have created a flash banner that i want to play in the header of all my pages but i´m having problems getting it to show on all the pages.
Firstly I added the flash swf into my includes file and inserted the flash into the includes file page using insert flash from the dreamweaver menu (code below):
<?php $currentPage=basename ($_SERVER['SCRIPT_NAME']);?>
<script src="../Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
<div id ="adBanner">
<script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','468','height','60','title','advertise','src','advertise_banner','quality','high','plu ginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveF lash','movie','advertise_banner' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="468" height="60" title="advertise">
<param name="movie" value="advertise_banner.swf" />
<param name="quality" value="high" />
<embed src="advertise_banner.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="468" height="60"></embed>
</object></noscript>
</div>
<div id ="NavBar">
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p><a href="index.php" <?php if ($currentPage == 'index.php') {echo 'id="here"';}?>>Home</a></p>
<p><a href="about.php" <?php if ($currentPage == 'about.php') {echo 'id="here"';}?>>About Us</a></p>
<p><a href="contact.php" <?php if ($currentPage == 'contact.php') {echo 'id="here"';}?>>Contact Us</a></p>
<p><a href="advertise.php?ad=y" <?php if ($currentPage == 'advertise.php') {echo 'id="here"';}?>>Advertise</a></p>
<p> </p>
</div>
Great the flash ad works when I load the includes page in a browser and when i look at all my other pages that have the link to the includes file the flash file shows as a grey box with F in the center, however if i load any of these pages into a browser the flash ad does not show.
I also tried doing exactly the same, adding the flash to the header of my template and saving it. However this did not update all of the pages that use the template, the flash ad would play in the browser if I load the template in the browser. (in this instance the actual swf file was in my templates folder with the template page).
The final thing i tried was just to add the flash to one of my pages just to see if it would work when i loaded the page into a browers, it didn´t and i don´t understand why as it worked on the includes page and template page. (the swf file in this case was in the file along with all the pages of my site).
It doesn´t seem that i have a problem with the actual flash banner, i just cannot seem to put it in the pages that i want to.
Any help or input in this matter will be greatly appreciated.
Thank you in advance.I don't know if this will be of any help but I have a flash rotator that I use on a few pages setup in a seperate file as well, here is the code from my include file
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="884" height="402" id="myFlashContent">
<param name="movie" value="/Image-Rotator-V2.swf" />
<!--[if !IE]>-->
<object type="application/x-shockwave-flash" data="/Image-Rotator-V2.swf" width="884" height="402">
<!--<![endif]-->
<a href="http://www.adobe.com/go/getflashplayer">
<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
</a>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
I also added the following to the head section of the page the flash is used on.
<script src="http://ajax.googleapis.com/ajax/libs/swfobject/2.2/swfobject.js" type="text/javascript"></script>
Regards
Richard -
.mov to flash banner ad via media encoder, size issues
Looking for some compression feedback, as I cannot get the results dialed in thru Adobe Media Encoder CS4.
Creating a flash banner ad, 11 seconds total, with 5 seconds of video from final cut. The size of the exported .mov is 784 KB, and I still have to hit a target of less than 60KB (yikes) on the final FLV export for the ad specs. Anyone had any luck here in these type of productions? When I convert to FLV (heavily compressed) and import into timeline of flash as embedded file, keeps increasing in size, hovering just below the 1MB mark. Without the video, the flash ad is at 20KB, so I really only have 40KB to work with.
When I open the FCP .MOV in Quicktime Pro and "export for web," I see a small file size of 4KB, could it really be that compressed?
But when I bring that 4KB file into Media Encoder, it goes over the 60KB limit.
Also, should note that final ad needs to be Flash 7 friendly...
Your input is appreciated.Predicated on info in the other THREAD, I will now ammend my previous post:
2.) Assets - that's why I asked
3.) Project - could still be a possibility
Looks like the Bug is still in the running and gaining fast.
Have you filed a Bug Report/Feature Request with the data that you've furnished in your two thread?
Good luck,
Hunt -
Flash banner in a Dreamweaver Template
Hi all,
I am using one of the provided Dreamweaver Templates (CSS).
All is fine, except that for some reason it does not like Flash
imports. I can alter the template as much as I like and it will
always successfully change across the site, BUT if I try to insert
a Flash movie/banner into the template - then it does not appear of
ANY of the site files. The only way I can see the flash banner, is
if I open the template.php file in a browser - then you can see
that it is in fact there and working - but for some reason the
other pages refuse to acknolwegde it. Images / Tables / Text - all
work fine - just not flash banners. I even tried saving the banner
as a JPG file in Flash, then sticking the JPG file in the template
where the banner should - and it worked perfectly, but as a .swf
extension it fails.
Am I missing something?
Nathan> BUT if I try to insert a Flash movie/banner into the
template - then it
> does not appear of ANY of the site files.
Because of the active content .js fix, when you insert a .swf
file into a
template, you must use a Site Root relative path for it.
Open the .dwt template file.
Double-click on the .swf in design view- the "browse to file"
dialog box
should come up showing the currently selected file.
look in the bottom of that dialog box for the pulldown to
change from
document relative path to site root relative path. Change it
to site root.
click okay and save the file, and let changes propagate.
does it show in the child files now?
[note- It may still not show during local preview because
site root relative
paths in javascript will not make any sense during local
preview- they
should work fine on the remote host if the site has it's own
domain name
though]
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
How to publish a flash banner without generating errors?
I need to upload a flash banner every time a condition is
verified. But I have troubles from the HTML code I use to call the
flash banner.
<CFIF #file# IS "fox">
<div><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0"
width="468" height="60" vspace="0" hspace="0"><param
name=movie value="
http://www.site.com/banners/#address#"><param
name=quality value=high><embed src="
http://www.site.com/banners/#address#"
quality=high pluginspage="
http://www.macromedia.com/shockwave/download/index.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="468" height="60"
vspace="0" hspace="0"></embed></object></div>
</CFIF>
The error i receive is:
Just in time compilation error
Invalid parser construct found on line 30 at position 220
ColdFusion was looking at the following text:
=
Invalid expression format. The usual cause is an error in the
expression structure.
This error is generated by the HTML code inside the CFIF tags
because if I change the code between the conditional tags CFIF, it
works fine.
Exemple:
<CFIF #file# IS "fox">
<div>
Now it works correctly!
</div>
</CFIF>
Please could you suggest me how to resolve this trouble?
Than You,
rikros> codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve
> rsion=5,0,0,0"
# is a reserved CF symbol. If your template has a
non-CF-related # symbol
in it, you need to escape it (##).
http://www.adobe.com/go/tn_17016
Adam -
Problems zooming out with a Flash Banner
I have created a Flash banner for the home page of my website. Here is the link to the page I am working on: http://adirondackvic.org/CSSTest9July2012-2.html
When I zoom in to increase the size of the web page, the Flash banner rescales automatically. However, when I zoom out, to decrease the size of the web page, the Flash banner does not automatically rescale. It remains the same size and you have to hit the refresh button to get it to rescale to fit the newly resized page.
Is there a fix for this? I searched the forum and the web and have not found an answer. I put a question on this in another forum, but received no responses. I found some discussions of the issue on the web and on this forum, but I was not able to figure out how to incorporate the suggestions into my page. I tried changing the scale from exactfit to showall, as recommended, but that created a problem with the appearance of the page. (The banner no longer fit properly into the header window.) I also tried (as recommended by one of the entries in this forum) to change width="100%" height="100%" or width="100%" height="auto". This fixed the problem for Internet Explorer, but then the entire banner disappeared in Firefox.
Please help! I am at my wit's end.... Thank you. ellen
Here is the relevant code:
<div class="header"><!-- end .header -->
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="960" height="100" align="absmiddle" id="FlashID" title="FlashBanner">
<param name="movie" value="BannerTest16.swf">
<param name="quality" value="high">
<param name="wmode" value="opaque">
<param name="swfversion" value="6.0.65.0">
<!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
<param name="expressinstall" value="../Scripts/expressInstall.swf">
<param name="LOOP" value="false">
<param name="SCALE" value="exactfit">
<!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
<!--[if !IE]>-->
<object data="BannerTest16.swf" type="application/x-shockwave-flash" width="960" height="100" align="absmiddle">
<!--<![endif]-->
<param name="quality" value="high">
<param name="wmode" value="opaque">
<param name="swfversion" value="6.0.65.0">
<param name="expressinstall" value="../Scripts/expressInstall.swf">
<param name="LOOP" value="false">
<param name="SCALE" value="exactfit">
<!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
<div>
<img src="Images/Banner102 -- Saint Regis Mountain from the Barnum Brook Trail -- June 2012-1.jpg" width="960" height="102" alt="Paul Smith's College VIC" align="absmiddle">
</div>
<!--[if !IE]>-->
</object>
<!--<![endif]-->
</object>
</div>Kevinsoffice wrote:
iDevices are pretty much dead hardware since they dont support popular flash. How many mac forums are filled with people complaining about Apples choice not to support it. And with much better hardware coming out like the Samsung line there are better choices then iStuff.
The evidence does not support that position.
As expected, Adobe has stopped developing Flash on mobile devices (iOS and Android)
http://www.businessinsider.com/adobe-to-kill-mobile-flash-starting-august-15-2012-6
http://www.digitaltrends.com/mobile/adobe-flash-for-android-gone-with-barely-a-whimper/
Flash is dying, iStuff is alive and well. -
Help with creating a flash banner
Hi,
I need some help with a creating/replicating a flash banner I
saw online. I cant find it anymore but I will do my best to
describe it.
The banner had multiple images layered on top of each other
horizontally. Each image covered the image to the left of it. When
you moused over an image the image expanded to full size while the
other remained contracted.
How can I create something with the above description? Are
there any good tutorials for something like this or maybe someone
can provide me with a few tips/tricks for doing this?
I am proficient in PShop and a beginner with Flash so the
design portion is not the hard part, just the programming/setup in
flash is what has me stumped.
Thanks in advance for any assitance.
Regards,
Mike
Hookah LifeUpdate:
The banner on this template has an exact example of what I am
shooting for.
http://www.algozone.com/zencart-templates-zc03c00287-p-1191.html -
What is the best way to create a flash banner that features video?
Hi I have created a html5 video banner but I also need to create a flash banner that will host a video in it
I have created the flash banner but not sure where to start in order to add video to it. I understand the best way is to host the video file on a server but how do I get that video to play within the banner?
ThanksYou can incorporate an FLVPlayback component that automatically loads the desired video. You could also make use of the NetStream class instead of having the component. Google either one to get information on using them.
-
Flash Banner not working in IE
We have a Flash Banner on our homepage that shows up great in FF but isn't showing up consistently in IE. Sometimes it will show up for a split second and then it changes to a white screen. Or it just shows up as a white screen from the beginning when you load the page. Then if you go to a different page and come back sometimes it will load perfectly. Other times you go to a different page and then come back and it still won't show up.
You can see it at http://www.rugged-cctv.com/
Any help would be great!I figured it out from a back up copy of the homepage.
Maybe you are looking for
-
How to get PA30/0024 event inform. on the Attendee Training Hist. Report
In Training and Event management is the standard report S_PH9_46000431 "Attendees Training History available for getting an overview of the eventtypes and events followed or to be followed by an employee. This reports shows only events en eventtypes
-
LR5 's Adjustment Brush doesn't seem to work-does the New Radial Filter have priority?
So why in the world would I update Lightroom in the middle of a job.? Before I was able to do in and touch up shadowy areas using (K) adjustment brush, but now it doesn;t seem to work. The radial brush does a good job for a defined area but for SPOT
-
When i edit my vocal files in logic pro 9, everything crashes. please help.
i'm running logic pro 9 and only when i edit certain vocal files.. my entire session crashes!! what could be the problem?!?!? thank you very much i've attached the crash report maybe someone can make sense of it! thanks!! Process: Logic Pro 999 Path:
-
We are about to perform an export and import of our portal system. We are running 9.0.2.0 on Windows. My question is if anyone has done this yet and what would be the database accounts and passwords for portal: portal_Schema: whats the database accou
-
Standby database recovery problems....
HP-UX 11.23 oracle 10.2.0.2 I know that this has been discussed quite a bit. I've spent a number of hours on this forum alone today just reading through the search hits. I've tried some of the 'tricks' that have been described in the threads. But I'm