Flash builder 4.5 can't create new mysql file

need help, have set up database and can get data onto datagrid but when add 'create' it adds fields and button, but when
press button to save it does not save.
tried the same setup on flash builder 4 and works, what do i have to set up to work on 4.5
thanks.
paul

For god's sake will anybody from Adobe say something about this?
I'm having the same issue and it's f***ing annoying.
"Please uninstall and reinstall the product" is not an acceptable error message.
Please provide a workaround.

Similar Messages

Dense Restructure 1070020 Out of disk space. Can't create new data file

During a Dense Restructure we receive: Error(1070020) Out of disk space. Cannot create a new [Data] file.
Essbase 6.5.3 32-bit
Windows 2003 32bit w/16GB RAM
Database is on E: drive with 660GB space total, database is ~220GB.
All cubes are unlimited
Tried restoring from backup same problem.
Over years and years the database is never recalculated, never exported and imported, never verified. Only new data loaded and dense restructured.
Towards the end of a dense restructure (about 89 pan files through about 101 2GB pag files), getting an error: Error(1070020) Out of disk space. Cannot create a new [Data] file.
There are still several hundred GB of free space available, and we can write to this free space outside of the essbase application within windows.
The server's file system is consistent, defragmented, and can prove use of additional space. Hard drive controller and system does not report any "hardware issues".
Essbase.cfg file
; The following entry specifies the full path to JVM.DLL.
JvmModuleLocation C:\Hyperion\Essbase\java\jre13\bin\hotspot\jvm.dll
;This statement loads the essldap.dll as a valid authentication module
;AuthenticationModule LDAP essldap.dll x
DATAERRORLIMIT 30000
;These settings are here to deal with error 1040004
NETRETRYCOUNT 2000
NETDELAY 1600
App log
[Sat Oct 17 13:59:32 2009]Local/removedfrompost/removedfrompost/admin/Info(1007044)
Restructuring Database [removedfrompost]
[Sat Oct 17 15:48:42 2009]Local/removedfrompost/removedfrompost/admin/Error(1070020)
Out of disk space. Cannot create a new [Data] file. [adIndNewFile] aborted
[Sat Oct 17 15:48:42 2009]Local/removedfrompost///Info(1008108)
Essbase Internal Logic Error [7333]
[Sat Oct 17 15:48:42 2009]Local/removedfrompost///Info(1008106)
Exception error log [C:\HYPERION\ESSBASE\app\removedfrompost\log00002.xcp] is being created...
log00002.xcp
Assertion Failure - id=7333 condition='((!( dbp )->bFatalError))'
- line 11260 in file datbuffm.c
- arguments [0] [0] [0] [0]
Additional log info from database start to restructure failure
Starting Essbase Server - Application [removedfrompost]
Loaded and initialized JVM module
Reading Application Definition For [removedfrompost]
Reading Database Definition For [removedfrompost]
Reading Database Definition For [TempOO]
Reading Database Definition For [WTD]
Reading Database Mapping For [removedfrompost]
Writing Application Definition For [removedfrompost]
Writing Database Definition For [removedfrompost]
Writing Database Definition For [TempOO]
Writing Database Definition For [WTD]
Writing Database Mapping For [removedfrompost]
Waiting for Login Requests
Received Command [Load Database]
Writing Parameters For Database [removedfrompost]
Reading Parameters For Database [removedfrompost]
Reading Outline For Database [removedfrompost]
Declared Dimension Sizes = [289 125 2 11649 168329 1294 622 985 544 210 80 2016 11 9 9 8 8 1 1 6 1 3 1 2 2 1 2 1 2 77 2 65 1 1 1 1 1 1 1 1 1 1 1 260 4 3018 52 6 39 4 1577 6 ]
Actual Dimension Sizes = [289 119 1 1293 134423 1294 622 985 544 210 80 2016 11 9 9 8 8 1 1 6 1 3 1 2 2 1 2 1 2 77 2 65 1 1 1 1 1 1 1 1 1 1 1 260 4 3018 52 6 39 4 1577 5 ]
The number of Dynamic Calc Non-Store Members = [80 37 0 257 67 ]
The number of Dynamic Calc Store Members = [0 0 0 0 0 ]
The logical block size is [34391]
Maximum Declared Blocks is [1960864521] with data block size of [72250]
Maximum Actual Possible Blocks is [173808939] with data block size of [17138]
Formula for member [4 WK Avg Total Sls U] will be executed in [CELL] mode
Formula for member [Loc Cnt] will be executed in [CELL] mode
Formula for member [OH Str Cnt] will be executed in [CELL] mode
Formula for member [Current Rtl] will be executed in [CELL] mode
Essbase needs to retrieve [1017] Essbase Kernel blocks in order to calculate the top dynamically-calculated block.
The Dyn.Calc.Cache for database [removedfrompost] can hold a maximum of [76] blocks.
The Dyn.Calc.Cache for database [removedfrompost], when full, will result in [allocation from non-Dyn.Calc.Cache memory].
Writing Parameters For Database [removedfrompost]
Reading Parameters For Database [removedfrompost]
Unable to determine the amount of virtual memory available on the system
Index cache size ==> [1048576] bytes, [128] index pages.
Index page size ==> [8192] bytes.
Using buffered I/O for the index and data files.
Using waited I/O for the index and data files.
Unable to determine the amount of virtual memory available on the system
Reading Data File Free Space Information For Database [removedfrompost]...
Data cache size ==> [3145728] bytes, [22] data pages
Data file cache size ==> [0] bytes, [0] data file pages
Missing Database Config File [C:\HYPERION\ESSBASE\APP\removedfrompost\removedfrompost\removedfrompost.cfg], Query logging disabled
Received Command [Get Database Volumes]
Received Command [Load Database]
Writing Parameters For Database [TempOO]
Reading Parameters For Database [TempOO]
Reading Outline For Database [TempOO]
Declared Dimension Sizes = [277 16 2 1023 139047 ]
Actual Dimension Sizes = [277 16 1 1022 138887 ]
The number of Dynamic Calc Non-Store Members = [68 3 0 0 0 ]
The number of Dynamic Calc Store Members = [0 0 0 0 0 ]
The logical block size is [4432]
Maximum Declared Blocks is [142245081] with data block size of [8864]
Maximum Actual Possible Blocks is [141942514] with data block size of [2717]
Essbase needs to retrieve [1] Essbase Kernel blocks in order to calculate the top dynamically-calculated block.
The Dyn.Calc.Cache for database [TempOO] can hold a maximum of [591] blocks.
The Dyn.Calc.Cache for database [TempOO], when full, will result in [allocation from non-Dyn.Calc.Cache memory].
Writing Parameters For Database [TempOO]
Reading Parameters For Database [TempOO]
Unable to determine the amount of virtual memory available on the system
Index cache size ==> [1048576] bytes, [128] index pages.
Index page size ==> [8192] bytes.
Using buffered I/O for the index and data files.
Using waited I/O for the index and data files.
Unable to determine the amount of virtual memory available on the system
Reading Data File Free Space Information For Database [TempOO]...
Data cache size ==> [3145728] bytes, [144] data pages
Data file cache size ==> [0] bytes, [0] data file pages
Missing Database Config File [C:\HYPERION\ESSBASE\APP\removedfrompost\TempOO\TempOO.cfg], Query logging disabled
Received Command [Get Database Volumes]
Received Command [Load Database]
Writing Parameters For Database [WTD]
Reading Parameters For Database [WTD]
Reading Outline For Database [WTD]
Declared Dimension Sizes = [2 105 2 11649 158778 1279 609 971 531 208 78 2017 11 9 9 1 1 1 1 6 1 2 1 1 2 1 1 1 2 77 1 1 1 1 1 1 1 1 1 1 1 1 1 260 3 2954 52 6 39 4 1581 6 ]
Actual Dimension Sizes = [1 99 1 1293 127722 1279 609 971 531 208 78 2017 11 9 9 1 1 1 1 6 1 2 1 1 2 1 1 1 2 77 1 1 1 1 1 1 1 1 1 1 1 1 1 260 3 2954 52 6 39 4 1581 5 ]
The number of Dynamic Calc Non-Store Members = [0 29 0 257 57 ]
The number of Dynamic Calc Store Members = [0 0 0 0 0 ]
The logical block size is [99]
Maximum Declared Blocks is [1849604922] with data block size of [420]
Maximum Actual Possible Blocks is [165144546] with data block size of [70]
Formula for member [Loc Cnt] will be executed in [CELL] mode
Formula for member [OH Str Cnt] will be executed in [CELL] mode
Formula for member [Current Rtl] will be executed in [CELL] mode
Essbase needs to retrieve [1017] Essbase Kernel blocks in order to calculate the top dynamically-calculated block.
The Dyn.Calc.Cache for database [WTD] can hold a maximum of [26479] blocks.
The Dyn.Calc.Cache for database [WTD], when full, will result in [allocation from non-Dyn.Calc.Cache memory].
Writing Parameters For Database [WTD]
Reading Parameters For Database [WTD]
Unable to determine the amount of virtual memory available on the system
Index cache size ==> [1048576] bytes, [128] index pages.
Index page size ==> [8192] bytes.
Using buffered I/O for the index and data files.
Using waited I/O for the index and data files.
Unable to determine the amount of virtual memory available on the system
Reading Data File Free Space Information For Database [WTD]...
Data cache size ==> [3145728] bytes, [5617] data pages
Data file cache size ==> [0] bytes, [0] data file pages
Missing Database Config File [C:\HYPERION\ESSBASE\APP\removedfrompost\WTD\WTD.cfg], Query logging disabled
Received Command [Get Database Volumes]
Received Command [Set Database State]
Writing Parameters For Database [removedfrompost]
Writing Parameters For Database [removedfrompost]
Received Command [Get Database State]
Received Command [Get Database Info]
Received Command [Set Database State]
Writing Parameters For Database [TempOO]
Writing Parameters For Database [TempOO]
Received Command [Get Database State]
Received Command [Get Database Info]
Received Command [Set Database State]
Writing Parameters For Database [WTD]
Writing Parameters For Database [WTD]
Received Command [Get Database State]
Received Command [Get Database Info]
Received Command [SetApplicationState]
Writing Application Definition For [removedfrompost]
Writing Database Definition For [removedfrompost]
Writing Database Definition For [TempOO]
Writing Database Definition For [WTD]
Writing Database Mapping For [removedfrompost]
User [admin] set active on database [removedfrompost]
Clear Active on User [admin] Instance [1]
User [admin] set active on database [removedfrompost]
Received Command [Restructure] from user [admin]
Reading Parameters For Database [Drxxxxxx]
Reading Outline For Database [Drxxxxxx]
Reading Outline Transaction For Database [Drxxxxxx]
Declared Dimension Sizes = [289 126 2 11649 168329 1294 622 985 544 210 80 2016 11 9 9 8 8 1 1 6 1 3 1 2 2 1 2 1 2 77 2 65 1 1 1 1 1 1 1 1 1 1 1 260 4 3018 52 6 39 4 1577 6 ]
Actual Dimension Sizes = [289 120 1 1293 134423 1294 622 985 544 210 80 2016 11 9 9 8 8 1 1 6 1 3 1 2 2 1 2 1 2 77 2 65 1 1 1 1 1 1 1 1 1 1 1 260 4 3018 52 6 39 4 1577 5 ]
The number of Dynamic Calc Non-Store Members = [80 37 0 257 67 ]
The number of Dynamic Calc Store Members = [0 0 0 0 0 ]
The logical block size is [34680]
Maximum Declared Blocks is [1960864521] with data block size of [72828]
Maximum Actual Possible Blocks is [173808939] with data block size of [17347]
Formula for member [4 WK Avg Total Sls U] will be executed in [CELL] mode
Formula for member [Loc Cnt] will be executed in [CELL] mode
Formula for member [OH Str Cnt] will be executed in [CELL] mode
Formula for member [Current Rtl] will be executed in [CELL] mode
Essbase needs to retrieve [1017] Essbase Kernel blocks in order to calculate the top dynamically-calculated block.
The Dyn.Calc.Cache for database [Drxxxxxx] can hold a maximum of [75] blocks.
The Dyn.Calc.Cache for database [Drxxxxxx], when full, will result in [allocation from non-Dyn.Calc.Cache memory].
Reading Parameters For Database [Drxxxxxx]
Unable to determine the amount of virtual memory available on the system
Index cache size ==> [1048576] bytes, [128] index pages.
Index page size ==> [8192] bytes.
Using buffered I/O for the index and data files.
Using waited I/O for the index and data files.
Unable to determine the amount of virtual memory available on the system
Data cache size ==> [3145728] bytes, [22] data pages
Data file cache size ==> [0] bytes, [0] data file pages
Performing transaction recovery for database [Drxxxxxx] following an abnormal termination of the server.
Restructuring Database [removedfrompost]
Out of disk space. Cannot create a new [Data] file. [adIndNewFile] aborted
Essbase Internal Logic Error [7333]
Exception error log [C:\HYPERION\ESSBASE\app\removedfrompost\log00002.xcp] is being created...
Exception error log completed -- please contact technical support and provide them with this file
RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING

To avoid all these things as a best practice
we didn't allow dense restructure on the cubes size>30 GB
As an altrnative, we will export the level0 data, clear the DB, and load the new data. After that aggregate the cube to store the data at all the consolidation levels.

HT2534 My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes accou

My friend created me an itunes store account with his credit card , his credit card is about to expire and they are asking me to re-enter the credit card and security card number .... I don't have these numbers ... How can i create new itunes account without credit card?????

Why do you need to create a new account?
Just change the payment method.
http://support.apple.com/kb/ht1918

When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

When i bought this iMac i failed to register correctly and as i am trying to install a printer i need to do this when i am logging on. How can i create new password

See
http://osxdaily.com/2011/08/24/reset-mac-os-x-10-7-lion-password/ and
http://osxdaily.com/2011/09/19/change-password-mac-os-x-10-7-lion-without-knowin g-current-password/
which also apply to Mtn Lion and Macericks.

Can we create new partner types for quallity notifications in SAP system?

Can we create new partner types for quallity notifications in SAP system?
The business requirement is to limit the available entries for partners displayed when they search in quality notification. I have already created new partner functions & assigned the relevant partner types, however struggling with defining new partner types.
Would appreciate help in resolving this.
Thanks,
Nilesh

I know this customisation setting ...It allows us to create the partner functions & assign it to the partner determination procedure.
Then you can assign the procedure to the notification type.
This customisation setting does not solve the problem I have.
I'm looking for the partner type creation process which we assign to the partner function.
Edited by: NILESH BHAVE on Aug 12, 2010 3:06 PM

Can we create new cref.exe

Hi all,
suppose if we modify the source code present in java card framework and then compile them to class files, converting these class files to JCA files , generating mask files from these JCA files, and using these mask files along with C code available to create new cref.exe
Is it possible to do the above steps.
Thanks in advance
murali

920553 wrote:
can we create new LOV's using forms personalizationhttps://forums.oracle.com/forums/search.jspa?threadID=&q=personalization+AND+LOV&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Can We Create New Categories and Folders?

I hate having all of my apps piled up in the "ALL" category. Can we create new categories such as "Business Apps" or "Education" in order to stay organized? If not can we at least create folders within the existing catefories?
Solved!
Go to Solution.

I read a response to a similar question yesterday on this forum. The BlackBerry tech said it is not an option right now but you can choose your favorites and have them show in the favorites section. Maybe folders will be available later. Enjoy the new tablet I know I am.

Can i create new CRM in 11i

I have a question, can i create new CRM(Conflict resolution Manager) additionally in 11i EBS..?

do we find any scripts to check about concurrent managers in EBS from back end(sqlplus )..?yes default installation give you some scripts to check about concurrent managers.
The following SQL scripts located under $FND_TOP/sql :
1. afimchk.sql Tells the status of the ICM and PMON method
2. afcmstat.sql Lists active manager processes
3. afrqrun.sql Lists all the running, waiting and terminating requests
4. afrqwait.sql Lists requests that are constrained and waiting for the ICM to release them
5. afrqscm.sql Prints log file name of managers that can run a given request. It can be used to check for possible errors when a request stays in pending status. It requires a request id value.
6. afcmcreq.sql Prints the log file name of the manager that processed the request
7. afrqstat.sql Summary of completed concurrent requests grouped by completion status and execution type. It requires number of days prior to today on which to report parameter.
8. afimlock.sql Lists locks that the ICM is waiting to get
9. afcmrrq.sql Lists managers that currently are running a request

HT201240 I forget my password and hint . How can I create new password ?

I forget my password and hint in MacBook Air 11-inch mid 2012 . How can I create new password .

Reset Password
OS X 10.7 Lion /10.8 MountainLion
Follow the instructions in the first and the third boxes.
http://pondini.org/OSX/Password.html
Note
Keychain
http://support.apple.com/kb/PH10623
Best.

Can we create new tablespace in Oracle Database 10g Express Edition?

Hi,
Can we create new tablespace in Oracle Database 10g Express Edition instead of using the default "users" tablespace provided?
Please advise.
Thank you.

Correct. The sum of all user tablespaces is not allowed to exceed 4 GIG.
You could try shrinking your tablespaces. Theres a script called maxshrink on http://asktom.oracle.com which is useful for this.
You could compress your tables.
If you are storing lobs, you could consider storing them as bfiles.
Or upgrade to Oracle Standard Edition 1. Its not that expensive.

HT2534 how can i creat new apple id

how can i creat new apple ID for free plz helpe me out

All Apple IDs are free.
Frequently asked questions about Apple ID

Flash Builder 4.5 can't start with Error 3

Flash Builder 4.5 can't start with error 3 occurred "Please uninstall and reinstall the product".
It is fine after those are done, but this problem occurred again and again after some days.
It is very annoying, please help!

For god's sake will anybody from Adobe say something about this?
I'm having the same issue and it's f***ing annoying.
"Please uninstall and reinstall the product" is not an acceptable error message.
Please provide a workaround.

Can't create new sites in Dreamweaver CS3. Help!

I am trying to create a new site in Dreamweaver CS3 but keep
getting the following error:
"The action cannot be completed because the other program is
busy.
Choose 'Switch to' to activate the program and correct the
problem"
I have tried every documented solution on the adobe website
and other discussion forums and still cannot get past the problem.
I have restarted the IIS server on my local PC as documented
on the following adobe technote:
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_16485&sliceId=2
Other things I have done:
1. I have followed all the advice in the links at the bottom
of the above page.
2. I have created a new user, logged into that and tried
creating a site with a "virgin" environment
and I still have the problem.
3. I have gone into the registry and renamed the site
configuration info in case something was corrupted.
This removed all my site configurations. No help!
4. I have turned of my firewall and restarted the IIS
server.
5. I have searched the web for anything even remotely
similar to this error and tried every tip out there.
I called Adobe and they referred me back to the technote
above, which I had already tried.
One last bit of info. I can't create new sites, but I can
edit web pages in my existing sites. However, I cannot change the
configuration of the website in the Manage Sites area (i.e. I can't
push the Edit button).
Has anyone had this problem? Any help would be appreciated. I
have hit a brick wall on this one and am trying to meet a deadline
on a new website I need to create.
If I can't find a solution quick, I will be an
ex-Dreamweaver user. That saddens me because I really like
Dreamweaver, but I have to perform on my job.

And are you running Skype?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Murray *ACE*" <[email protected]> wrote
in message
news:ga4hba$bnv$[email protected]..
> What is your firewall?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "Steven A" <[email protected]> wrote in
message
> news:ga4ejo$8nb$[email protected]..
>>I have rebooted many times. Actually, I am the only
user that ever logs
>>in.
>> This is happening on my laptop. I just created
another user to see if it
>> was a
>> corruption issue with sites tied to my regular
login.
>>
>>
>>
>

Can't create new photo streams in Aperture

When I select new photos to add to a photo stream, I am not prompted to create a new photo stream, they are simply sent to the stock photo stream that is already shared between my iPhone and Aperture. How can I create new photo streams in Aperture if the standard method doesn't work for me? What is wrong with my setup that I can't follow the videos of instructions because I don't get a dialog box when I try to share?
Thanks,
Will

Is your Profile signature correct Mac OS X (10.7.5) ? Then you cannot create Shared Photo Streams. They require OS X Mountain Lion v10.8.2 and Aperture 3.4, see:
Using and troubleshooting shared photo streams.
You can create Shared Photo Streams with:
an iPhone, iPad, or iPod touch using iOS 6
a Mac using OS X Mountain Lion v10.8.2 with Photo 9.4 or later or Aperture 3.4 or later
a PC using Windows 8, Windows 7, or Vista with the iCloud Control Panel 2.0 or later installed. (iCloud Control Panel 2.1 required with Windows 8.)
If your system is compatible with shared streams, check, if you have enabled shared streams in both the System Preferences and Aperture's Preferences.
iCloud: Photo Stream FAQ
iCloud: Photo Stream Troubleshooting
Regards
Léonie

Can't create new email account.

I can't create new emails account because when I go to Setting and click in Mail,Contacts ,calender, it goes back to home, intead of open the options. Any advice? Thanks
Julio

Double tab the home button and when the application button shows up hold the settings icon until you see a red dot in the corner and hit that.
If that dosent work then try restarting the device. Hold the lock button (top right of iPad) until slide to power off appears then hit the same button to get it back on.
To actually make an email account you have to go to the providers web page, you can't create one in settings

Flash builder 4.5 can't create new mysql file

Similar Messages

Maybe you are looking for