Flash Builder 4 and facebook issue

Hi,
I've implemented the facebook files neccecary for the facebook & application integration correctly.
Once I've done it with the tutorial's project it worked perfectly.
However once I tried doing the same proccess for my latest project and after I've uploaded the project to my website
all it gave me was a blank white page with nothing in it.
important notes:
* - The application IS registered with facebook.
* - The project has the SAME files as the first project I did with the tutorial (except the main application ofcourse).
* - Using Flash Builder 4 (flex 4).
Link to the black white project:
http://www.sagiyo.com/facebook/userpong/
Any suggetions?
Thanks in advance,
Sagi.

again, anyone?

Similar Messages

Flash Builder 4 and Bridge CS4

Hi everybody, absolute newbie here. I need to develop a custom metadata panel for Bridge CS4, it will be based on this post http://idletechnology.blogspot.com/2011/12/adobe-xmp-panel-improvements.html
I downloaded Flash Builder 4 and the FileInfo SDK 5.1. The problem is it apparently won't work in Bridge CS4, so I downloaded FileInfo SDK 4.4, which in turn doesn't work in Flash Builder 4.
What should I do to be able to develop the panel for Bridge CS4?
Thanks
Vasik

After a tremendous amount of frustration and days of exhaustive web searching, which yielded nothing, I stumbled across the answer by accident while leaving work so I thought I'd share it with you incase anyone else is experiencing the same frustration using flash builder 4 and windows authentication.
The resolution:
Turn off the flash builder 4 built-in network monitor.
This captivate demo illustrates the issue and resolution. In the captivate demo I didn't show the response details on the http service but its your standard:
401 - Unauthorized: Access is denied due to invalid credentials.
http://www.forgeoffury.com/flashbuilder4-netmon/
Cheers!

Flash Builder 4 and ColdFusion9

Hello Friends,
I am currently developing Flex Application and using PHP as backend technology to create CMS/eCommerce RIAs
So here is a simple question, is there a advantage for me using ColdFusion compared to PHP ?
Which ?
Cheers
Marc

After a tremendous amount of frustration and days of exhaustive web searching, which yielded nothing, I stumbled across the answer by accident while leaving work so I thought I'd share it with you incase anyone else is experiencing the same frustration using flash builder 4 and windows authentication.
The resolution:
Turn off the flash builder 4 built-in network monitor.
This captivate demo illustrates the issue and resolution. In the captivate demo I didn't show the response details on the http service but its your standard:
401 - Unauthorized: Access is denied due to invalid credentials.
http://www.forgeoffury.com/flashbuilder4-netmon/
Cheers!

Are Flash Builder 4 and Flex 4 the same ?

Hi Everyone,
1. Are Flash Builder 4 and Flex 4 the same ?
2. Are Flash Builder 4 and Flash CS4 the same ?
Thanks,
May

Grizzzzzzzzzz wrote:
AFAIK
1. Are Flash Builder 4 and Flex 4 the same ?
Yes, flash builder 4 was the name given to what is effectively flex 4.
This answer is, essentially wrong.
Flex 4 is a Software Development Kit (SDK) that includes a compiler, a user interface framework, and a few other items.
Flash Builder 4 is an IDE that can be used to develop Flex applications. Flash Builder 4 can also be used to code ActionScript w/o any dependencies to the Flex Framework.
Grizzzzzzzzzz wrote: 2. Are Flash Builder 4 and Flash CS4 the same ?
No, Creative suite 4 is a software library consisting of many different programs
This answer is much more correct; but for additional clarification:
Flash Builder 4 is an IDE that programmers can use to develop applications for the Flash Platform.
Flash Professional CS4 is an IDE that Designers can use to create time-line based animations for the Flash Platform.
One is geared for designers; and another for programmers. In theory they can be used to reach the same end point although I wouldn't want to do application programming in Flash Professional; nor would I Want to do design stuff in Flash Builder.

I have flash builder 4 and want to start developing for android

I have flash builder 4 and want to start developing for android. I don't want to buy flash cs5 or device central or buy a android phone.
I just want to test an app for it.
What are my options?
should I wait?
Are adobe going to milk me to for to get any productivity going here?

When trying to install ADT im getting
Cannot complete the install because one or more required items could not be found.
Software being installed: Android Development Tools 0.9.7.v201005071157-36220 (com.android.ide.eclipse.adt.feature.group 0.9.7.v201005071157-36220)
Missing requirement: Android Development Tools 0.9.7.v201005071157-36220 (com.android.ide.eclipse.adt.feature.group 0.9.7.v201005071157-36220) requires 'org.eclipse.jdt.junit.runtime 0.0.0' but it could not be found
why must I install the JDT?

Flash builder 4 and flex 3 sdk - co-existence?

Can I install Flash Builder 4 Premium on the same XP machine with Flex 3 SDK without conflicts?
Thanks.

Yes.
Perhaps you meant to ask about Flash Builder 4 and Flex Builder 3 co-existing? If so, then yes, you can also have Flash Builder 4 and Flex Builder 3 on the same machine without any conflicts; although I would not recommend installing them in the same eclipse instance.
You can also have as many Flex SDKs installed on your machine at a time and have Flex Builder 3 or Flash Builder 4 setup to use all the SDKs. Although, I don't thikn it is possible to use use more than one SDK as part of a single project. it'd be impractical, if not impossible.
I think that covers all bases.

Flash builder 4 and flash 10.1 standalone debugger issue on osx

If I use the standalone flash debugger version (Flash Player Debugger 10.1.52.14) with flash builder 4 on osx 10.6.3 then this happens:
I compile the project and the debugger opens. If I click the red stop button then it never closes the debugger. I have to close it manually. Doing that means I have to use clean alot more and often up to 3 renders open after that.
If I switch over to the standalone "Flash Player Debugger 10.0.42.34" then the red stop button works fine and I dont get duplicate players launching.
Anyone else experience this?
I don't use the web player versions.

10.1.53.64 is the latest standalone version. Could you please try with that version?
You'll get it here: http://www.adobe.com/support/flashplayer/downloads.html

Flash Builder 4 Beta RDS issue

I cannot connect to ColdFusion via RDS with my Flash Builder 4 beta 2. I have no issue connecting to CF via RDS in dreamweaver CS3.
However whenever I try to connect to a CFC via "connect to DataService" and I get "Enter RDS password and user name".. I always get "Authentication faliure. The supplied username or password may be wrong". I created 2 users for RDS in the CF 9 adminstrato.. and it would not accept either username/ password combo. I even tried using RDS with no authentication and rebooted the pc each time.
I had no issue doing a very basic connection to a cfc like in the HelloCF example.. yet db connectivity fails.. idea of whats' the issue here?
Thanks!

Hi,
Can you access your CFC from the browser?
i mean like http://localhost:8501/MyCFC.cfc in the browser would open something like:
http://localhost:8501/CFIDE/componentutils/cfcexplorer.cfc?METHOD=getcfcinhtml&PATH=/MyCFC .cfc&NAME=MyCFC.cfc
Now replace METHOD=getcfcinhtml to METHOD=getcfcmetadata.
If this displays some text as the result like:
'C:\ColdFusion8\wwwroot\WEB-INF\cftags\component.cfccomponentWEB-INF.cftags.componentWEB-INF.cftags.componentC:\ColdFusion8\wwwroot\MyCFC.cfcAT_TestcasesFiles.LogicTesting.BookServiceTestAT_TestcasesFiles.LogicTesting.BookServiceTestnoBookgetItemremoteanytrueitemcomponent'
If this itself throws an error, then you would be hitting
http://bugs.adobe.com/jira/browse/FB-23626 , which showed up authentication error though CFC had problems.
This has been resolved in the latest pre-release build.
If you do not have access for the pre-release build please send a mail to rkrishna AT adobe DOT com.
Hope this helps please let us know if you still face issues.
Thanks,
Balaji
http://balajisridhar.wordpress.com

FLASH Builder 4.5 Debugger Issues

Hey,
Recently the projects I've been working on have had additional compiler arguments added to it:
http://livedocs.adobe.com/flex/3/html/help.html?content=compilers_21.html
(e.g. -define+=myval,true -define+=myvalx,false)
This works ok for the compiler but I'm noticing now sometimes my FLASH Builder will now trigger breakpoints in external libraries no matter what I do.
I've referenced the library directly from my application, removed any swc references internally, did a clean etc. This never happened before when I never had these conditional compiler arguments. Breakpoints also work fine within the context of the main application.
Has anyone experienced this before and know anyway to work around it?
(This doesn't ALWAYS happen, sometimes the very same library works fine, but other times it does not)
Thanks,
Sean

My two cents on this issue & how I resolved it.
I was getting a similar message which referenced a location in C:\Windows\System32\Macromed\Flash, and was looking for this version of the Flash Player: Flash64_10_3_162.ocx
What I tried that did NOT help:
Re-associating the SWF file type to open with a Flash Player debugger version downloaded from Adobe's site.
These three steps resolved the issue for me:
I had installed the 64-bit version of the Flash Player a few months ago, so I uninstalled that since it cannot be used by Flash Builder as a debugger. Back in FB 4.5.1, I got another message saying Flash was not installed at all.
I used Adobe's Flash uninstaller tool and then,
re-installed the latest debuggers for IE & Firefox.
I can now debug in IE or FF without any issues. FB finds the debug version of the Flash Player.
From what I saw when researching this, there seem to be many causes for this issue so I'll give Adobe some slack here. I will point out that the post from Adobe employee Anirudh Sasikumar, above, was not helpful in my case and was in fact misleading and not specific enough as to the location of the file he referenced. I searched for that file and found dozens of them on my machine, none in any location he mentioned. I wish he would have taken a little more time to give a complete path to this file. Maybe he did, but I could not find that path, or folders, on my machine. I work in a tightly-controlled network environment so perhaps these folders are ones I cannot see due to permissions issues, but it would've saved me time to get a complete path to start with.
For complete and full disclosure, here is my set-up; hopefully this will help others with a similar setup who are experiencing this nagging issue:
Windows 7 Enterprise 64-bit, Service Pack 1
Flash Builder 4.5.1.313231
Eclipse 3.6.1r361_v20100909xxxxxxx
Flash Debugger version (IE & FF): 10.3 r183

Flash builder 4.7 upgrade issue from Flash builder 4.5 (key is not valid)

Hi,
We (Company) are buying Adobe products more than 6-7 years now. We bought the Flash builder premium 4.5 and Flash builder premium 4.5 for PHP volume licence. Now flash builder 4.7 should be complementary upgrade for us. But when we are using Flash builder 4.7 trial version and adding serial number (Flash builder 4.5 serial number), it's just not working and showing a error "key is not valid".
I chat with Adobe customer care 4 different people, they end up saying that let us transfer you to volume licence department and then chat ended. No more chat messages, I checked more than one hour and still no message.
Then I called they, it took 15 mins to connect with customer care. I picked the "upgrade" option from phone menu and then connected with a guy. After listening complete case he forwarded my call to Volume licence executive and the volume licence executive transferred it to some other guy and the other guy redirect it to some specialized person. So total 4 guys. The last guy (specialized) name was Rohit.
This guy Rohit asked me, did I buy a customer support programme (some product about $2.nn.00 )? I said no, we bought volume licenses for Flash builder premium 4.5 ( about $4000.00 ****). He said, sorry sir I can not help you in this, but I can provide you an e-mail address and you can report your concern there. I already passed my 1.5 hour in this conversation. I said okie. He gave me a case number and told me that he will send a email mentioning that email address as per my request I disconnect the phone.
I never get that email address.
Can some one suggest me what to do next. My case number is : 209-788-274.
My email is: [email protected]
Thanks,
Amitabh Arya

I have the same problem, and i have send request complementary upgrade (Adobe® Flash® Builder® 4.7 Complimentary Upgrade), and only received a Acrobat change licensed...
I´m working with 4.7 Beta the last mounths, and now all the days have to see "please enter your license". So one problem that you can jump with money (if you have that money..), isn´t a problem. Like a i have license from flex 3, upgrade to flex 4, and upgrade to flex 4.5, i´m going to take de upgrade from 4 standard to 4.7 standard (47,97 euros), and not waste my time and money on calls. So yes, I'll see adobe with another eyes...
Best regards,
José Ramón León

Modeler development - Flash Builder 4 and LCDS JBoss

Hi,
I am trying out modeler development in Jboss, Followed the below steps and I am getting error while deploying the model
1         Installed LCDS 3.0 as JBoss.
2         Uncommented the RDS configuration in web.xml of lcds.war.
3         Copied lcds.war to jboss-4.2.3.GA\server\default\deploy folder.
4         Configured Flash builder RDS Server to point Jboss.
5         Created Data model from Database.
6      Getting error while deploying the model.(PFA JBoss Error-1.txt)
I am assuming bug LCDS-408 does not apply to Jboss 4.2.3.GA, but still went ahead and removed hibernate related JAR from WEB-INF/lib folder.
After this change while deploying the model(fml) following error pops up in flash builder. Corresponding JBOSS log in JBoss Error-2.txt
I did not find any documents /blogs related to modeler development in JBoss
Please help me on this, Thanks in advance
Rao

Hi Martin,
Flex Mobile project is only available with Flash Builder Burrito (which is a preview release of the version after Flash Builder 4) available at http://labs.adobe.com/technologies/flashbuilder_burrito/
Flash Builder 4 does not support mobile projects.
Thanks,
Anirudh

Flash Builder 4.7 activate issue

I buy the flash builder 4.7 and it keeps showing the internet error as i trying to activate the product, i have no idea where i can get the support.
all the possible have been try, such as
- https://lm.licenses.adobe.com Done ->Congratulations! You have successfully connected to Adobe License Management Server. works
- https://ims-na1.adobelogin.com/renga-idprovider/resources/img/logos.png can see the adobe logo
- host is clear
- GlobalSign Root CA is enabled
all works find just i can not activate the flash builder 4.7 premuim.
anything further i can do ? i can not just leave the product there , i paid for it and it's not cheap...

Did you contact Adobe support? https://helpx.adobe.com/support.html

Flash Builder 4 and PHP

Hi
I was just wondering if you could help me with a problem i'm having. I'm using adobe flash builder 4 to create an application and i have it connected to a php database to populate the data grids. I have three data grids, which are drag enabled and they will be populated from the database. I then have a fourth data grid, which is used to store the data dragged from the other three.
What i want to do is take the data that is dragged into the fourth grid and store it in an array in a php file. Is this possible?
Shell

I also have Flash Builder 4.5 for PHP and the ANT view does not show when going to Window -> Show View --> Other. I could not find it in any of the folders.
However, I was able to add it by hitting Command 3 (CTRL 3 on PC) and typing Ant.

Flash Builder 4 and Blaze Data Services wizard

Hello,
My project uses BlazeDS for backend and Flex for frontend.
I use Data Services wizard to auto generate the valueObjects from the corresponding Java classes.
But the generated code does not seem to implement object inheritance. The valueObjects only inherit from their own _Super* classes.
Example
Java objects
Circle extends Shape
Generated actionscript objects
Circle extends _Super_Circle extends EventDispatcher
Shape extends _Super_Shape extends EventDispatcher
Doesn't Flash Builder Data wizards support this feature or am i missing something?
Thank you
Filaretos Postekoglou

Hi,
It should work fine. Can you please share the exact version of the LCDS. Also please let us know the service types and channel types you are using in your application.

Flash builder apps and android support

Hello fellow forum i want to know if the applications that I develop in flash builder are compatible with which versions of android?, it develops an agenda and I am testing on a mobile device with android 2.2.2, but will not install, I thank you for collaboration.

Hi
FB4 DCD supports extensibility through which additional server technologies could be supported. Unfortunately, we have not yet added documentation on this. If you would be interested in building ruby on rails support to FB DCD, please drop me a note at rkrishnaATadobeDOTcom.
Thanks,
Ram

Flash Builder 4 and facebook issue

Similar Messages

Maybe you are looking for