Flash Player Security Settings

How can I get a copy of the global security settings manager
for use on an Intranet?
So far I can only change my security settings in flash
through the internet and I need to do this on about 100 computers
that are connected to my intranet with no means to connect to the
internet.
Thanks
Glenn

Hi mocca,
Thanks again for your reply. You are giving me things to re-think about, I thought about all these options yesterday, but now that you mention them as the solutions, I will re-think with more gusto. A few things I'm still dwelling on:
Why is that an issue?
Because the users system settings should always override anything that comes from a disk... Same with any programm on my computer, if somwhere from a network/external drive wants to open my browser without my consent, why should it?
Agreed. It should not. However, per the paradigm of my project on disk, the user launches the browser, the browser loads the swf, but the loading of all the other content is restricted. That seems counter-intuitive - since the user has already launched the main app, they obviously trust the app to run on their box, but they now have to go through an extra 'security layer' step in order to load the accompanying content.
As per publishing to Air, I tried yesterday and Flash Builder kicked all sorts of errors. I'll try publishing to air more today...
In the mindset of the great John Peterman: "Ah, the 'client changing requirements', where the client's expectations are high, the knowledge of the "level of effort" is low, and the process is terribly frustrating."
Thx again,
Chipleh

Similar Messages

Flash Player Security Settings per your D:/ drive...

Hi,
For anyone who read my post earlier in the day, I apologize for the redundancy; this is a new issue for me.
I've been working on an e-learning product using Flash Builder; it was developed to be web-based, but the client has changed the requirement and now they have requested a stand-alone dvd drive-based deliverable.
The project consists of a Main.html(launched per autorun.inf), Main.swf(which loads into Main.html no problem from the disk), and multiple .flv files - so Main.swf loads into Main.html from D:\ , but none of the .flv's will load. However, once I trust D:\ per going to the [Flash Player Settings Manager>Trusted Location Settings>add my D:\ drive to the Trusted File or Folder Location], everything runs well.
My questions are:
Why is that an issue?
Is there a way around it?
What am I doing wrong?
Since everything is fully contained and running locally from the D:\ drive, why does the Flash Player need me to trust that device in order to run the content? I t seems completely counter-intuitive which leaves me boggled.
When I build a release, everything works perfectly locally(without trusting the C:\ drive(obviously)), once I burn the files to disk the external content won't load until trusting D, and what's even MORE, when I copy the content "burned to disk" locally, it won't play either until I trust the C:\ drive!!
Little help, please? I know I'm doing something wrong, but I can't find anything online.
Thanks in advance,
~Chipleh

Hi mocca,
Thanks again for your reply. You are giving me things to re-think about, I thought about all these options yesterday, but now that you mention them as the solutions, I will re-think with more gusto. A few things I'm still dwelling on:
Why is that an issue?
Because the users system settings should always override anything that comes from a disk... Same with any programm on my computer, if somwhere from a network/external drive wants to open my browser without my consent, why should it?
Agreed. It should not. However, per the paradigm of my project on disk, the user launches the browser, the browser loads the swf, but the loading of all the other content is restricted. That seems counter-intuitive - since the user has already launched the main app, they obviously trust the app to run on their box, but they now have to go through an extra 'security layer' step in order to load the accompanying content.
As per publishing to Air, I tried yesterday and Flash Builder kicked all sorts of errors. I'll try publishing to air more today...
In the mindset of the great John Peterman: "Ah, the 'client changing requirements', where the client's expectations are high, the knowledge of the "level of effort" is low, and the process is terribly frustrating."
Thx again,
Chipleh

Flash 8 Player security settings Help

Hi All. Im having some annoying problems with Flash player 8
(the standalone player not web one).
I am making a flash portfolio, and am using an XML file to
import data (such as images and text) into the portfolio at
runtime.
Everything works when run in the flash IDE when i run the swf
(see IDE.gif), but when i run it in local flash standalone player
(see Player.gif), the images are blocked out (un-masked) - this
doesnt happen when i view the swf on the web or when i make a
projector, which makes me think its something to do with flash 8
player security settings.
ive already changed the settings, adding the local path of
the file and the image directories, but still it wont work.
what other settings do i need to change??
IDE.gif :
www.mitchellpage.com.au/temp/IDE.gif
Player.gif:
www.mitchellpage.com.au/temp/Player.gif

AndiMorris wrote:
> I'm having some trouble with the global security
settings in Flash Player 8. I
> have deployed the player successfully using GPO, but now
have a piece of
> software (Nelson Thornes) that requires content from
c:\program files\nelson
> thornes to be allowed in order to run. Manually enabling
this using the
> settings manager works a treat, however it only changes
it for the current user
> and I can't find any way of setting it per station so
that I can package it up
> and deploy it. I can't expect all of my users to do this
themselves.
There is an MMS.cfg file that you can deploy that will allow
you to
control this site wide without individual user interaction
(overriding
settings manager).
Start learning here:
" IT Administration: Configuring Flash Player auto-update
notification"
http://www.adobe.com/go/16701594
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player
Adobe

Remove Adobe Flash Player Security Alert without changing the browser settings

Dear all,
I m using captivate for doing my eDemo, however I am just be
alerted by Adobe Flash Player Security and be requested to update
the Internet>Settings of the browser. As I found that some
companies most likely are using Captivate for their web application
demonstration (like HSBC,
HSBC),
but they dont have any Adobe Flash Player Security prompted. Would
anyone know how to remove or skip the alert? Thanks for your help!
Regards,
Maggie

quote:
Originally posted by:
maggie_822
Dear all,
I m using captivate for doing my eDemo, however I am just be
alerted by Adobe Flash Player Security and be requested to update
the Internet>Settings of the browser. As I found that some
companies most likely are using Captivate for their web application
demonstration (like HSBC,
HSBC),
but they dont have any Adobe Flash Player Security prompted. Would
anyone know how to remove or skip the alert? Thanks for your help!
Regards,
Maggie
I'm having the exact same problem. Is there a way to suppress
these warnings?

Flash Player security Pop up when using camera and microphone.

Hello Friends
Can any body suggest me how to remove flash player security pop up for camera and microphone through coding.
Thanks in advance.

The security pop-up was first introduced with FP7. If you want to bypass it I can name two ways off the top of my head:
1. Regardless of ActionScript version (2.0/3.0) in the Flash authoring enviroment, in the Publish Settings dialogue box, the Flash tab, near the bottom choose Access Network Only from Local Playback Security.
2. Publish your movie as a projector. Both of these techniques will allow to "play" your swf file locally.

Help flash player security popup

Hello i keeps on having this message poping up on my Fire Fox browser. Its to do with Flash Player Security. anyone able to help???
Adobe Flash player has stopped a potentally unsafe opperation. The following loacal application on your computer or network chrome\\tavgp\content\html\tabswelcom.htm is trying to comunicate with this internet-enabled location: s.nsdsvc (that part changes) To let this application communicate with the internet, click settings.

jamesp282 wrote:
To let this application communicate with the internet, click settings.
And did you click Settings?
You may also be able to change the security settings at http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.htm l

Adobe Flash Player Security on Mac OSX 10.8.5

Hello, I need some help. I keep getting an Adobe Flash Player Security warning every time I try to load Pandora on my Mac. I not sure if this is some form of spyware. I've tried to research it online but I can't find anything with this specific error message. Also I've run a few antivirus/spyware programs, but turned up with nothing. I've never come across it before when using Pandora in the past, so I know it's something out of the ordinary.
Thank you all very much for the assistance.

There's a local file "/about/srcdoc" (I'd imagine it's in the Muse-Pandora folder) that's attempting to connect to the Internet. This is a "safety feature" built into Flash Player to prevent malicious files from connecting and downloading a virus. Why they have that for Mac OS I do-not-even-pretend-to-know, but it's there.
Open your System Preferences and the Flash Player pref pane
Click the "Advanced" tab in the Flash Player Settings Manager window
Scroll down to Developer Toos and click "Trusted Location Settings...:
Click "Add Folder..."
Select the Muse-Pandora folder in your Applications folder
Confirm
Close the Manager and retry it.

Mac Safari "Adobe Flash Player Security" issue

Using Captivate 5.5 for Mac. I've been having sporadic problems viewing my published .htm files in Safari. I always get the "Adobe Flash Player Security" popup on initial load, but before today I could usually just click OK and refresh the browser window to play the Flash content. Today I can no longer view the content in Safari. (Firefox plays the content fine.)
The popup says "To let this application comminicate with the Internet, click "Settings". When I click Settings, my Mac OS Flash preference dialog opens. But the only options available are "Local Storage Settings", "Camera and Mic", "Playback" (which pertains to peer-assisted networking, not local playback), and "Advanced" (which only allows you to delete local files). Just for experimentation, I tried adding my local path as an allowed site in "Local Storage Settings" but it doesn't have any effect.
I don't have any other problems using regular Flash-based websites in Safari. Only my published Captivate files spawn this security popup.
How do I fix this?

It worked! Thank you. (Actually, I used the related URL for "Global security settings for content creators" (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04a.ht ml#119065) since that URL is intended for local development/testing, whereas the link you provided is for sites on the Web.)
But I'm curious. . . according to Adobe (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager.html), "Beginning with Flash Player 10.3, the Local Settings Manager supersedes this Online Settings Manager for managing global settings on Windows, Mac, and Linux computers." Yet the page goes on to explain when one would use the online Global Settings. This is very confusing. If the local Settings Manager supercedes the online manager, why would the online manager still be required for certain uses? And why isn't a link to the Global Settings manager provided within the local Settings manager. What am I not understanding?

Remove "flash player security" alert

Is it possible to avoid
“flash player security” alert dialog box.
My project is built in flash 6 but it won’t run under
flash player 8.
It gives security alert dialog box, and client asks me to
remove this dialog box.
Is it possible to remove it or not?
Or is there any documentation available on net stating that
it’s not possible to remove it?:confused

The answer is inside the same article you quote, page 3:
"Local-trusted: This sandbox has no restrictions. It offers the
same open privileges as all local files were given in Flash Player
7. Any local file may be placed in this sandbox if given
authorization by the end user. This authorization may come in two
forms: interactively via the Settings Manager or noninteractively
via an exectuable installer that creates Flash Player configuration
files on the user's computer."
So you might have the user do something which is a lot more
work than clicking ok in a security alert (I haven't even done it
myself on my machine).
Or you might provide an executable that needs to be
downloaded with at least two more security alerts.
The situation of course changes if you can deliver that
executable in a different form, e.g. via a CD-ROM

Stop flash player security panel

Hi,
I want to stop flash player security panel to appear every time in my video recorder. I apply allow and remember but still popup appears. How I can stop this popup if once user chooses allow and remember?
Thanks,

The security pop-up was first introduced with FP7. If you want to bypass it I can name two ways off the top of my head:
1. Regardless of ActionScript version (2.0/3.0) in the Flash authoring enviroment, in the Publish Settings dialogue box, the Flash tab, near the bottom choose Access Network Only from Local Playback Security.
2. Publish your movie as a projector. Both of these techniques will allow to "play" your swf file locally.

Getting Flash Player Security Error when running extension.

I had created a nifty utility which uses a Flash interface. It worked fine in CS3, but after upgrading to CS4, I keep getting the Flash Player Security Error popup when I run it.
=======================================
Adobe Flash Player Security
Adobe Flash Player has stopped a potentially unsafe operation.
The following local application on your computer or network:
C:\Program%20Files\Adobe\%20Photoshop%20CS4\Presets\...\ChopBot.swf
is trying to communicate with this Internet-enabled location:
<unknown>
To let this application communicate with the Internet, click Settings.
You must restart the application after changing your settings.
[OK] [Settings...]
In CS3, opening the Global Security Settings panel and adding the script's path to the trusted locations would fix this problem, and the utility would work going forward.
In CS4, however, adding the script's path to the trusted locations seems to have no effect.
I am using the ExternalInterface class in the Flash UI to communicate to and from the JavaScript.
Has anyone else run into this issue and found a solution?
~§~

Welcome to our community, Rachel
Where are you running your movie from? If you are planning on
running them from a server, there should be no need to worry about
your end user seeing those messages. However, if you are planning
on each user copying them to their own hard drive or if you are
running from a CD-ROM, you may need to perform some trickery to
make them work without issue.
The message is occurring because there are links in some of
the files that point to internet resources and the Flash player is
seeing that as a potential security risk. So it is blocking the
action until you pat it on the head and assure it the world will
not, in fact, end if it shows you the content.
If you wish to banish the screen on your PC, take a look at
the tutorial linked below.
Click
here to view a tutorial
I'll hold off on the other bit until I'm certain what we are
dealing with.
Cheers... Rick

What camera resolution mode is used by the Flash Player camera settings manager

What camera resolution is used by the Flash Player camera settings manager? I am referring to the camera settings that you have to pull up by right-clicking on a Flash Player swf that is running, and from the right-click menu you hit settings...select the camera tab...and then you can hit the little camera icon and will show you the live video feed from the camera.
In order for the live feed to be displayed, Flash Player requests a camera resolution mode to the driver. What mode is being requested?
For example, could it be 160x120 @ 30fps?
Or is it 176x144 @ 30fps?
http://www.macromedia.com/support/documentation/en/flashplayer/help/help04.html#117113

I have the same cam as you (it's apretty darn good cam IMHO).
I don't ever see any resolution request when I click the icon.
My cam initializes at 1920X1080, per the logitech specs. The box in the settings is 4:3, but the cam is running at 16:9, in apps like Skype, or FaceTime (Mac).
It shows the same setup screen in WIn XP, Vista, Win 7 and Win 8, which ALL share the same cam on my setup.
Being as the cam feed in the setup is 4:3, I'd have to say the resolution is 160:120 as opposed to 176:144 which would be a 5.3:3 or 16:9.

Adobe flash player security blocking

The adobe flash player security is blocking mail with the message /about/srcdoc is trying to communicate with this interner-enabled location static.adsafeprotected.com
How do I get rid of this?

IanGCou wrote:
How much of a risk is it unblocking?
If you select a single site to allow, not much, as long as it's a trusted site and you're careful about what you open there (in this case it being mail, you need to use your own discretion). If you set Flash Player to allow ALL sites, then you may be opening yourself up to anything from spyware to outright viruses.

Adobe Flash Player Security pop up during installation.

Hello, I recently purchased a macbook this week. My first apple computer. I was downloading and installing a widget, astroids, through apples website and after installation I noticed a dialogue box appeared. It said "Adobe Flash Player Security" as the title and then it showed where the downloaded file was located. I looked in the folder where it said it should be located but nothing was in that folder. I couldn't close the message box, it just stayed their with my mouse pointer doing a circular pattern. I eventually restarted my computer because I didn't know how to get rid of it. My question is should this be something I should be be worried about? Is everything ok with my macbook? Sorry if this sounds silly, I am new to owning an apple computer and trying to get familiar with it. Thank You.

For the Flash Player stuff, start with http://www.adobe.com/products/flashplayer/articles/localcontent/
After sorting that out, see:
Switching from Windows to Mac OS X,
Basic Tutorials on using a Mac,
Mac 101: Mac Essentials,
Anatomy of a Mac,
MacTips, and
Switching to the Mac: The Missing Manual, Snow Leopard Edition.
Additionally, *Texas Mac Man* recommends:
Quick Assist.
Welcome to the Switch To A Mac Guides,
Take Control E-books, and
A guide for switching to a Mac.

Flash Player Security error when publishing HTML files

I am new to the Captivate world and am just in love with the
features - but I have been having a very difficult time publishing
my "movies". I have 8 files that are all called upon in one movie
(like a table of contents). I have abandon the though of publishing
each as an EXE file - and have decided to go the HTML route.
However when I try to run the published HTML file I get an Adobe
Flash Player Security error - saying "Adobe Flash Player has
stopped a potentially unsafe operation." It then says that the
local SWF file is trying to communicate with the Internet-enabled
HTM file.
Can someone please tell me what this means? We are using
Captivate for distance learning as well as internal - so I can't
know for sure what the end-users will be using when the files are
used.
Any assistance would be greatly appreciated.

Welcome to our community, Rachel
Where are you running your movie from? If you are planning on
running them from a server, there should be no need to worry about
your end user seeing those messages. However, if you are planning
on each user copying them to their own hard drive or if you are
running from a CD-ROM, you may need to perform some trickery to
make them work without issue.
The message is occurring because there are links in some of
the files that point to internet resources and the Flash player is
seeing that as a potential security risk. So it is blocking the
action until you pat it on the head and assure it the world will
not, in fact, end if it shows you the content.
If you wish to banish the screen on your PC, take a look at
the tutorial linked below.
Click
here to view a tutorial
I'll hold off on the other bit until I'm certain what we are
dealing with.
Cheers... Rick

Flash Player Security Settings

Similar Messages

Maybe you are looking for