Flash Quiz not calculating totals correctly at the end

Hi,
I am working on a Flash XML quiz, that can be found on this
tutorial
http://www.permadi.com/tutorial/flashMXQuiz/index3.html
I have it just about working except at the end on the summary
screen, the application is supposed to calculate the number right,
the number wrong and the percentage.
I am not sure what I have missed, but I zipped up the .fla
file and the xml file and wanted to see if someone could take a
look. I know the problem isn't with the XML file so it must be in
the AS towards the end in the summary screen section.
here is the path the download the zip
http://www.inspired-evolution.com/Quiz.zip

the XML file is only storing the questions. For the scoring
calculations I am using three dynamic text boxes with var values of
numOfQuestionsAnsweredCorrectly,numOfQuestionsAnsweredCorrectly,
numOfQuestionsAnsweredIncorrectly
and in the AS I am using
userScore=(numOfQuestionsAnsweredCorrectly*100)/
(numOfQuestionsAnsweredIncorrectly+numOfQuestionsAnsweredCorrectly)
I am following the tutorial to a Tee, so unless there is a
typo or errors w/ the tutorial this should be working.

Similar Messages

  • DC pension not calculating at 10% of the Pensionable earnings.

    Users,
    Part of the reason we made the changes to /171 was so that we could setup DC pension that would calculate automatically. We setup the WT 7310 effective September 1st, but the Pension is not calculating at 10% of the Pensionable earnings.  It looks almost like it is taking out the COLA rate is this possible?

    More info please. Where is this percentage defined at config level and  do you use Savings Plans  (0169) IT? More info on the config.

  • All of a sudden, Adobe Flash is not working. Have installed the latest version to no avail. This happened at the same time on four (4) computers! Any suggestions?

    Question
    All of a sudden, Adobe Flash is not working. Have installed the latest version to no avail. This happened at the same time on four (4) computers! Any suggestions?

    Well, I kinda figured that was true, so I disabled it. Firefox does not lock up now. I suspect it might be a Google Finance page graph that is causing the problem, rather that Flash. Thanks for all your help. J

  • How to Hide rows in ALV without affecting total sum at the end of table?

    Hi,
    I need some help in hiding particular rows in an ALV Grid without affecting the total sum at the end of the table. I am trying to hide the rows that have negative quantities, but I still need those values so that the user can still compute for the total sums. Can anyone help? Thanks.
    Joseph

    Hi,
    Hopw this way you can hide the rows in the GRID.
    DATA:
      ld_column      TYPE lvc_fname,
      ld_hide          TYPE abap_bool.
    FIELD-SYMBOLS:
      <ls_entry>     TYPE any,
      <ld_fld>         TYPE any.
      ld_column = 'COL_1'.  " column which you want to suppress if everything is zero
      ld_hide     = abap_true.  " = 'X';  default hide column
      LOOP at <gt_outtab> ASSIGNING <ls_entry>.
        ASSIGN COMPONENT (ld_column) OF STRUCTURE <ls_entry> TO <ld_fld>.
        IF ( <ld_fld>   > 0 ).
          ld_hide = abap_false.  " display column because at least single value > 0
          EXIT.  " leave LOOP
        ENDIF.
      ENDLOOP.
      READ TABLE gt_fcat INTO ls_fcat
                           WITH KEY fieldname = ld_column.
      IF ( syst-subrc = 0 ).
        ls_fcat-no_out = ld_hide.
        MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
      ENDIF.
    hop you will get the total with for those columns too.
    Regards,
    Madhavi

  • Favourites folder will not open, tiny square at the end of the row?

    x3 bookmark folders will not open,(4 will), at the end of the folders that will not open is a tiny square.

    Try http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Why does Adobe not inform customers who have iPhones below 5 that Reader is not compatible until very near the end after WASTING customer's time? BIG NEGATIVE from here

    Why does Adobe not inform customers who have iPhones below 5 that Reader is not compatible until very near the end after WASTING customer’s time? BIG NEGATIVE from here

    When you view an App in the App Store or iTunes Store, the listing will show what iOS versions are supported by the app.
    See this posting:
    How do I get a version of Adobe Reader for an IPod touch with IOS 6.1.6

  • Why do Yahoo Flash videos not always run correctly in Chrome and Firefox/Windows 8?

    I upgraded early last month to Windows 8 Pro.
    Running Yahoo! News and other videos (Yahoo! Screen, etc.; virtually all Yahoo branded products) I get a black screen, no error message on Chrome and Firefox. The videos run correctly on Internet Explorer.
    I have not found a way to run these videos at all in Firefox or the 64-bit Waterfox.
    In Chrome, I can DISABLE the internal Pepper-based Flash player and the videos will run (but nothing ELSE will: no YouTube, etc.)
    I can keep a plug-ins page open in Chrome and repeatedly enable and disable the internal Flash player; I can copy and paste the URL for what I'm watching back into IE...or perhaps some kind and knowing person here will have a better idea. For me, I sense a bug somewhere. BTW...this machine dual-boots Win8 and WIn7. The problem does not exist in Win7. Please don't suggest going back to Win7; that's a VERY mature (translate SLOW and quirky; survived repeated change of motherboard and other major components) install that I'm continually weaning myself away from and rarely boot into it anymore (Win8 boots from SSD and is blazingly fast, Win7 not so much).
    I have not found any site other than the ENTIRE Yahoo site that has this problem!
    Jay from the Bronx

    I'm back! Actually, this issue has been happening to me every now & then but I'd just given up on dealing with it. But now I'm motivated again.
    I clicked on a video link in Facebook that sent me to NASCAR | Facebook which turns from the https URL to those two words on this site for some odd reason, and it just popped a box telling me saying Flash Player Upgrade Required - Get Flash Player and the video's image never displayed under that and it couldn't be played.
    Then once again I went thru all of the steps to insure that both I do actually have Flash Player and that it is Enabled. I do and it is. I also read somewhere to click the gear icon in IE then click Safety > ActiveX Filtering. I do that and I see a checkmark next to ActiveX Filtering. I've tried it both with a checkmark and without one and there's no difference.
    I have Windows 8.1 fully updated, IE-11 and Flash Player
    I see the swinging tire swing image in #5. Verify if Flash Player is installed at Flash Player Help.

  • System not calculating as mentioned in the price differentials multipliers

    Dear Folks,
    We are using contingent worker functionality in R12.1.3.
    1) For example,we have a PO with line type as rated based temporary labour, UOM as "HR" , unit price as 100 and total amount is 100000.
    2) Mentioned multipliers in PO for price differentials as Holiday as 2 and Overtime as 1.5.
    3) In general working hours in a day is 8 hrs.The calendar defined in the system with Mon-Fri as working days.
    4) Timecard entered in OTL with Sunday as '8' hrs, Monday as '10' hrs.
    5) Whereas system need to calculate as for Sunday 8hrs=>8*100*2=1600 and for Monday =>10hrs=(8*100)+2*100*1.5=1100 in total need to show as 2700.
    6) And those time card details interfaced from OTL to purchasing and it shows as received with an amount of 1800 as received in the PO shipments under more tab.
    System does not calculated as per mentioned price differential multipliers.
    Am i missing any setup?
    Any help will be highly appreciated
    Regards,
    Sri.

    Please someone help...I am stuck on this at some place or the other and now finally at this place when I thought that everything is well:(

  • Tax value is not picked up correctly for the condition type in SO creation

    Hi All,
    I have a issue in Picking up Tax value correctly for the condition type in SO Creation.
    Actual Issue:
    When creating the sales order manually,
    tax value is picked up correctly for one condition type: ISS3.
    When the Sales Order is created via Idoc using the function module 'idoc_input_orders', tax value is not picked for same condition type: ISS3.
    We need to find out why the value for the condition type 'ISS3' is not picked in this way!
    Can anybody solve this issue!
    What can be the reason which is stopping picking up tax value for condition type: ISS3 when Sales Order is created via F.M 'IDOC_INPUT_ORDERS'! While it picked up the same while creating Sales Order manuallly.
    Thanks in advance.
    Thanks,
    Deep.

    Hi All,
    Can anybody give the solution for above posted issue!
    Working:
    When creating the sales order manually,
    tax value is picked up correctly for the condition type ISS3.
    Actual Issue:
    When the Order is created via Idoc using the function module 'idoc_input_orders',
    tax value is not picked .
    I need to find out why the value for the condition type 'ISS3' is not picked.
    I have debugged the issue from WE19 but upto Conditions tab it is picking up tax value but then it is becoming zero again it remains zero after saving SO.
    But Manually tax value is picked up for condition type ISS3 and remains same after saving order.
    I have debugged it several times fro WE19 but not able to find route cause for the issue.
    What can be the issue over here!
    Can anybody give me solution for the same!
    Thanks in advance.
    Thanks,
    Deep.

  • ReFS can not be automatically correct in the Parity Space ?

    I had to test
    the automatic correction of ReFS on parity space, but did not cause the automatic correction is performed any times I try.
    ReFS does not corrected even if tried on dual parity.
    I tried,
    Three VHD atatched to Windows Server 2012 R2 Virtual Machine.
    Create pool, parity space, format ReFS on VM.
    Write data to ReFS.
    Shutodown VM.
    Modify the data portion I wrote.
    Start VM.
    Read that data.
    The expected automatic correction but it was not carried out.
    Log Name: System
    Source: ReFS
    Date: 2014/01/10 13:48:43
    Event ID: 133
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: WIN-T431BH574GD
    Description:
    The file system detected a checksum error and was not able to correct it. The name of the file or folder is "E:\New Text Document.txt".
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="ReFS" Guid="{036647D2-2FB0-4E32-8349-3F5C19C16E5E}" />
    <EventID>133</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T04:48:43.347097300Z" />
    <EventRecordID>1398</EventRecordID>
    <Correlation />
    <Execution ProcessID="4" ThreadID="148" />
    <Channel>System</Channel>
    <Computer>WIN-T431BH574GD</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <EventData>
    <Data Name="ObjectNameLength">24</Data>
    <Data Name="ObjectName">E:\New Text Document.txt</Data>
    <Data Name="FailureReason">0xc0000470</Data>
    </EventData>
    </Event>
    Log Name: Microsoft-Windows-DataIntegrityScan/Admin
    Source: Microsoft-Windows-DataIntegrityScan
    Date: 2014/01/10 13:50:07
    Event ID: 55
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: WIN-T431BH574GD
    Description:
    File data scrub operation failed. File name: E:\New Text Document.txt; range offset: 0x0; range length (in bytes): 0x4000; bytes repaired: 0x0; bytes not repaired: 0x4000; status: A data integrity checksum error occurred. Data in the file stream is corrupt..
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-DataIntegrityScan" Guid="{13BC4371-4E21-4E46-A84F-8C0FFB548CED}" />
    <EventID>55</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T04:50:07.206437000Z" />
    <EventRecordID>24</EventRecordID>
    <Correlation />
    <Execution ProcessID="2976" ThreadID="3044" />
    <Channel>Microsoft-Windows-DataIntegrityScan/Admin</Channel>
    <Computer>WIN-T431BH574GD</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <EventData>
    <Data Name="FileNameLength">24</Data>
    <Data Name="FileName">E:\New Text Document.txt</Data>
    <Data Name="InternalFileReference">0x0</Data>
    <Data Name="FileOffset">0x0</Data>
    <Data Name="Length">0x4000</Data>
    <Data Name="BytesRepaired">0x0</Data>
    <Data Name="BytesFailed">0x4000</Data>
    <Data Name="Status">0xc0000470</Data>
    </EventData>
    </Event>
    Can be automatically corrected ReFS what if situation?
    I used VHDs here.
    https://www.dropbox.com/s/zalzl5132ysr9hr/Archive.zip
    ReFS_parity_pool1.vhdx  Consistency pool member
    ReFS_parity_pool2.vhdx  Consistency pool member
    ReFS_parity_pool3.vhdx  Consistency pool member
    Corrupted_parity_pool1.vhdx  Same as ReFS_parity_pool1
    Corrupted_parity_pool2.vhdx  Same as ReFS_parity_pool2
    Corrupted_parity_pool3.vhdx  Copy of ReFS_parity_pool3, modified one byte.
    Mirror Space always works well.

    Hi,
    Correct me if I'm wrong.
    You create 3 VHD(x) files on host server and connected them to a VM, which act as physical server on VM.
    Using the 3 VHD(x), you created a storage pool in VM and created a parity virtual disk.
    Then you wrote files, shutdown VM and edit one of these VHD(x) which emunicate the parity disk corruption. It cannot be fixed automatically by ReFS file system.
    From the reply I got, VHD files will not able to be fixed for such issue - So I assume that using VHD files in VM for the test may not get the correct result. If available it is more recommended to test with physical hard disk. 
    If you have any feedback on our support, please send to [email protected]

  • Calculating total discount at the row level

    Hi,
    I want to determine the total discount amount for all of the invoice row levels by summing the row totals that have the same discount % and then multiplying that total by the row discount percent.
    Example:
    Lets say there is an invoice with 3 line items
    Qty     ItemCode     Price    Discount%
    2         A                $30            10
    2         B                $20            10
    2         C                $15             5
    I want to figure the total for the first 2 lines (because they have the same discount amount) by multiplying the quantity (230)+(220)=100 and then calculating the discount from this total. (100) * (.10) = $10 and then calculating the discount for the third line item ((215).05)=1.5. This brings the total discount amount to $11.50.
    Below is what I have drafted for a query so far.
    Select
    //For each grouping of items with the same discount %
    (SUM ((T0.Quantity * T0.PriceBefDi)) * DiscPrcnt)
    FROM INV1 T0 WHERE T0.DocEntry=$[OINV.DocEntry]
    Any ideas?
    Thanks,
    Luke

    Gordon,
    I was thinking that I would have to use a group by (grouping on the discount %) statement or possible a sub-query to accomplish this. The group by statement would replace the commented section. "//For each grouping of items with the same discount %"
    I will work on this query some more and post my results if I figure out a way to accomplish this.
    Thanks,
    Luke

  • Is it possible to delay the flash on a T5i to fire at the end of a long exposure shot

    I'm wanting to take long exposure shots of dancers and would like the flash to fire at the end of the exposure instead of the begining to increse the depth of field right as the shutter closes. Is that possible using the on camera flash of a T5i and if so what are the settings?
    Thanks,
    John

    When you use a TTL flash (Canon's E-TTL or E-TTL II) the camera uses a multi-zone metering system (think of an imaginary grid system overlaying your image) and (1) meters with no flash at all, then (2) fires a pre-flash at very low power while simultaneously metering again.  It then compares the difference in each zone between #1 and #2 to determine how much of a difference the flash made.  By doing this it can identify highly reflective surfaces (e.g. mirrors, glass, reflective metals, etc.) and eliminate those from the flash evaluation.  It can also find zones where the flash seemingly made no difference at all (e.g. if there was a light source in that zone... such as a lamp) and elminate those.   Light sources and reflections would ordinarily fool a flash metering system into thinking it had produced enough light ... even if it hadn't.  With those zones safely eliminated it can then compare the difference for each zone between #1 and #2 to determine how much addtional power should be necessary to correctly light them.
    It does all of this during the pre-flash.   The shutter is closed when it does this (the light will not affect your image.)
    Then the shutter opens and at some point it fires the flash again... only this time using the power level calculated during the pre-flash phase.  Only this second firing of the flash will show up in your image.
    If you switch the flash to manual mode, you wont get a pre-flash.
    The on-board flash is useful as a "fill" flash (decreasing the severity of shadows) and it can be used as a primary flash IF the subject is reasonably close (e.g. around 10' is fine... 14' feet is a stretch and beyond that... not so great.)
    An externally attached speedlite flash can provide significantly more power.  It can also be located off-camera to provide better lighting (on camera lighting is "flat" because there's no highlight/shadow side to any 3D surface... textures look 2D as a result.)
    As for "depth of field"... this is a different problem and the flash can help, but there are some caveats.
    If you're shooting indoors with only the available light in the room, then you're likely in challenging circumstances and using lenses with wide-open apertures.  Hence the depth of field is fairly narrow.
    If you could increase the lighting then you could reduce the aperture opening and increase the depth of field.
    But there is a catch.... light exhibits a property sometimes called "fall off".  This is because it follows a rule in physics called the "inverse square law" whereby the intensity of light decreases as the distance from the light source increases.  Each time the distance from the light source increases by the square root of 2, the light intensity is cut in half (exactly half... that's not an approximation.)  E.g. the amount of light illuminating a subject which is 14.1 feet away from the flash will be exactly half as compared to a subject which was only 10' away.  The square root of 2 is approximately 1.41.  So 10 x 1.41 = 14.1.  
    This means if you are photographing two subjects... one is 10' away and the other is about 14' away then the more distant subject will only receive half as much light.  Suppose we go to a crazy distance... and we have a flash 100' away.  NOW the second person has to be 141' away before they get half as much light.  This means two subjects within just a few feet of each will not receive "noticeably" different levels of light.
    While placing the flash farther from the two subjects will reduce the difference in illumination on your near vs. far subject, built-in flashes cannot handle these larger distances... they don't have enough power.  But an external flash brings more power for you to do this.  
    Canon's speedlite model numbers actually provide an indication of their power level.  If you delete the trailing zero from the model number (e.g. in a 430EX II you'd omit the "0" and get "43"... in a 600EX-RT you'd omit one "0" and get "60', etc.) the number you get is the flash "guide number" in meters.  The "guide number" is an indicator of how far the flash can adequately illuminate a subject... but the f-stop and ISO settings you use on the camera will change this.  So the "guide number" uses a baseline ISO of 100 and a baseline f-stop of f/1.  Of course you don't have an f/1 lens but the baseline is used because it makes the math easy. You divide the guide number by the f-stop you are using.  e.g. if you are shooting at ISO 100 and f/8 then you'd divide your guide number (suppose you have a Canon Speedlite 600EX-RT.. that's a guide number of 60 meters) and you'd get 60 ÷ 8 = 7.5 meters.  Convert meters to feet and that works out to 24.6 (about 25').  Of course that's at ISO 100. Bump up to ISO 200 and you can multiply that distance by 1.41... or bump up to ISO stops to ISO 400 and you can double the distance (about 50'... and that's at f/8).
    I should caveat that this assumes you are pointing the flash directly at the subject and there are no light modifiers in use (no soft-diffusers, you aren't "bouncing" the flash off a ceiling or wall, etc.)
    Here's a Youtube video that might help you understand the light fall-off problem.
    Tim Campbell
    5D II, 5D III, 60Da

  • Help! Quiz - need to count score at the end

    I have a working quiz but I want to know how to get the score of the number of correct answers the person got but I can't seem to figure out the code for it. This is my code below. Can someone help me?
    stop();// movie clip waits on buttons
    gloss_mc._visible = false;// set the gloss initially to not visible
    score_int = 0;// score on the quiz is initially zero
    // button functions
    q1_btn.onRelease = function() {
        scoreQuiz_fnc("1");
    q2_btn.onRelease = function() {
        scoreQuiz_fnc("2");
    q3_btn.onRelease = function() {
        scoreQuiz_fnc("3");
    q4_btn.onRelease = function() {
        scoreQuiz_fnc("4");
    function scoreQuiz_fnc(ansSelected) {
        trace("scoreQuiz_fnc ("+ansSelected+")");
    // define answer key
    answerkey_arr = new Array();
    answerkey_arr[1] = '2';// the answer to the question on frame 1
    answerkey_arr[2] = '4';// the answer to the question on frame 2
    answerkey_arr[3] = '3';// ... etc.
    answerkey_arr[4] = '4';
    answerkey_arr[5] = '3';
    answerkey_arr[6] = '1';
    answerkey_arr[7] = '3';
    answerkey_arr[8] = '4';
    answerkey_arr[9] = '1';
    answerkey_arr[10] = '2';
    glosskey_arr = new Array();// create array of gloss responses
    glosskey_arr[1] = 'The correct answer is: Congenital heart defect.';
    glosskey_arr[2] = 'The correct answer is: Four areas of the heart are defected because "tetra" means four. ';
    glosskey_arr[3] = 'The correct answer is: Two left valves because there is only a right and left valve.';
    glosskey_arr[4] = 'The correct answer is: Ventricular Septal Defect because this is when there is a hole (septum) between the right and left ventricles..';
    glosskey_arr[5] = 'The correct answer is: Babies because this condition congenital meaning at birth.';
    glosskey_arr[6] = 'The correct answer is: There is not enough oxygen carried within the blood which causes a discolouration in infants.';
    glosskey_arr[7] = 'The correct answer is: Heart murmur because this condition occurs at the heart.';
    glosskey_arr[8] = 'The correct answer is: After crying, during bowel movements or the occurrence of kicking legs in awakening.';
    glosskey_arr[9] = 'The correct answer is: Shunt because you cannot place the other objects in a heart.';
    glosskey_arr[10] = 'The correct answer is: Heart.';
    function nextQuestion_fnc() {
        gloss_mc._visible = false;// hide the gloss
        nextFrame();// advance timeline to the next question
    // score the answer selected by user
    function scoreQuiz_fnc(ansSelected) {
        trace("For question "+_currentframe);
        trace("scoreQuiz_fnc("+ansSelected+")");
        //if the answer key for this question matches the answer selected
        if (gloss_mc._visible == false) {
            if (answerkey_arr[_currentframe] == ansSelected) {
                trace("Correct");
                score_int = score_int+1;//add one to the score count
                nextFrame();// go to next frame
            } else {
                trace("Incorrect!");
                // show the gloss
                gloss_mc._visible = true;
                gloss_mc.gloss_txt.text = glosskey_arr[_currentframe];// insert gloss from the array
                // end if statement
                trace("Score is now "+score_int);
    }// end of function

    Try this
    Name the dynamic text box in var not at Instance name
    You will find it in properties panel .By selecting the dynamic text field you will have some properties like var,single line ....ect
    or
    Try this one
    this is your code : score_txt.text = score_int;
    try this :score_txt = score_txt+1;
    where  score_txt is the instance name or the var name you are assigning to the dynamic text field where you will display the score.
    Note: Change all of the dynamic text field name "score_int" in the script in to score_txt ,Because you have changed the dynamic text field to score_txt at the beginig of the script also you have score_int = 0.change heare also.
    If your problem is solved mark this as Answered

  • Windows 7 on MacBookPro Lion not starting, it gets to the end of the windows logo then nothing...

    I have a problem with getting Bootcamp going on my MacBookPro sometimes. It will get to the end of the winows logo start to show the bllue winows 7 pic and then nothing... I have to re-start several times with the same issue till I get the safe mode dialogue. If I then get into control panel - system and security - check for performance issues it says superfetch is not running and also asks about choosing start up programs sometimes. I can set bootcamp etc to run from the start up program dialogue to resolve that issue but it vstill brings up the super fetch issue as unresolved. Lion will start up ok but not windows. ?This issue only hapens at temporatures of 12 centigrade or lower. Any ideas?
    Bootcamp 4.0
    Windows 7 home premium
    processor i5 - 2415M @ 2.3GHz
    64 bit

    you don't need or have to have superfetch
    do you have an SSD?
    not sure why but seems like you nailed the issue: cold temp - and disk drive is too cold or not spinning up properly
    try booting from Windows DVD and perform any checks and repairs.
    schedule or force it to do chkdsk on the partition next time

  • What specs. do I need to look at to not get chirping sounds at the end of a sound fi

    Hi all,?I am trying to run an experiment for a doctoral project and I need some help. I have a really expensi've sound card called the lynx one that I have no problems with. Recently my school purchased the soundblaster x-fi extreme audio sound card because we are testing to see if we can use a cheaper sound card and get the same results. However, at the end of certain sound files, we get a chirping sound from the soundblaster which is the end of the clip being cut off. It is like the release time of the file or something, but we can't mess with the cli
    ps.
    Also it doesn't do that for the lynx one so we know that some sound cards will not allow you to hear the cut off. Any advice on what specifications to look at etc to not hear the chirping sound but still getting a sound card that isn't 500 dollars? Thanks!

    This one is good:
    http://store.apple.com/us/product/MD836LL/A/apple-12w-usb-power-adapter

Maybe you are looking for