Flash9 n stopAllSounds()
stopAllSounds() works still ok in Flash9 within one .swf as
usual.
BUT BUT BUT
it has messed up here:
Objective: There are n number of sounds button on a same HTML
page. if user
plays any of the sound that plays in loop. But we want to
achieve that when
one sound is being played and if user hits on other sound
everything should
stop and new sound should start playing. It was working very
well before
with the same flas.
Problem: This still works fine as desired in all players
before the latest
(Flash Player 9). BUT whoever installs new version of Flash
Player first
sound never stops and keeps on playing. We have to make sure
just one sound
should play at a time.
I've got more that 4000 flas how do I solve this? do I need
to make changes
in all fla?
Parry
I do not yet understand the question. What does this mean:
"There are n number of sounds button on a same HTML page"
What is a sound button? How do they relate to SWF movies (you
only mention
html page, not how you SWF file or files fit into this)?
Please provide a link to the web page that shows the problem.
As it is, it is very unclear exactly what you are doing, or
what you are
expecting to have happed.
"palmvilla" <[email protected]> wrote in
message
news:e9ls4u$e4h$[email protected]..
> I also need an answer to this same question, so thank
you for posting it.
> Now if someone has a useful reply....
> it would be much appreciated
Similar Messages
-
Flash Player 9 & stopAllSounds()
stopAllSounds() works still ok in Flash9 within one .swf as
usual.
BUT BUT BUT
it has messed up here:
Objective: There are n number of sounds button on a same HTML
page. if user
plays any of the sound that plays in loop. But we want to
achieve that when
one sound is being played and if user hits on other sound
everything should
stop and new sound should start playing. It was working very
well before
with the same flas.
Problem: This still works fine as desired in all players
before the latest
(Flash Player 9). BUT whoever installs new version of Flash
Player first
sound never stops and keeps on playing. We have to make sure
just one sound
should play at a time.
I've got more that 4000 flas how do I solve this? do I need
to make changes
in all fla?
ParryPlease don't spam all over the forums .. just post in one and
see what
happens.
Anyway .. I don't follow what you mean by "n number of sounds
button on a
same HTML page"
Can you provide a link to your web page so we can see what
you are really
talking about?
Jeckyl -
Flash9 on Nokia N810 does not recognize microphone nor camera (works or not?)
Hi.
I'm testing a Nokia N810 to port some realtime webservice on
this kind
of platform (really good device).
I can read everywhere in the web that n810 comes with "full
Adobe Flash9
plugin" but this plugin seems not be able to recognize
microphone nor
camera hardware. I would need to publish at least an audio
stream (with
fcs): is possible or not?
and with Nokia E90 (Flash Light 3)?
thank you.
Massimiliano Carli
http://start.mc2labs.comHi Massimiliano,
N810 has FP9 pre-installed and is supported in the browser.
What camera and mic are you trying to access on the device?
Have you used any sample code from Flash authoring to test
this out? -
StopAllSounds() has stopped entire application!! HELP
Hi all,
i'll come straight to the point !
you have 5 buttons.swf and 1 HTML page.
If you put these all 5 buttons into a HTML page and click on
any button.swf
it plays some audio. but if you hit any other button the
first one doesn't
stop eventhough all button triggers stopAllSounds() first
before it play
sound.
Exactly this thing used to work before and it is working if
until Flash 8.
the minute you install Flash 9 it just doesn't work!
How can I solve this please?
Any help would be awesome!
cheers
ParryStop this spamming .. your problem has been answered in
several threads ..
You are becoming nothing but a nuisance.
Jeckyl -
Please help !! stopAllSounds();
Hi all,
i'll come straight to the point !
you have 5 buttons.swf and 1 HTML page.
If you put these all 5 buttons into a HTML page and click on
any button.swf
it plays some audio. but if you hit any other button the
first one doesn't
stop eventhough all button triggers stopAllSounds() first
before it play
sound.
Exactly this thing used to work before and it is working if
until Flash 8.
the minute you install Flash 9 it just doesn't work!
How can I solve this please?
Any help would be awesome!
cheers
ParryIf you check out AS2 to AS3 migration doc,
here
its says:
quote:
This is no longer a global function, but it is still
available as a method of the SoundMixer class, which provides
global sound control.
Then go have a peek at the SoundMixer class and its the
StopAll() method that you want.
Pluap -
StopALLSOUNDS() ??? is it not anymore?
Hi all,
i'll come straight to the point !
you have 5 buttons.swf and 1 HTML page.
If you put these all 5 buttons into a HTML page and click on
any button.swf
it plays some audio. but if you hit any other button the
first one doesn't
stop eventhough all button triggers stopAllSounds() first
before it play
sound.
Exactly this thing used to work before and it is working if
until Flash 8.
the minute you install Flash 9 it just doesn't work!
How can I solve this please?
Any help would be awesome!
cheers
Parry"Parry" <[email protected]> wrote in message
news:e9qu1k$rfi$[email protected]..
> Hi all,
>
> i'll come straight to the point !
>
> you have 5 buttons.swf and 1 HTML page.
>
> If you put these all 5 buttons into a HTML page and
click on any button.swf it plays some audio. but if you hit any
other button
> the first one doesn't stop eventhough all button
triggers stopAllSounds() first before it play sound.
>
> Exactly this thing used to work before and it is working
if until Flash 8.
>
> the minute you install Flash 9 it just doesn't work!
Just want to confirm what you have said. When swfs are
seperated on an html page the stopAllSounds command worked on
version 8 and
earlier and does not work with version 9.
tralfaz -
Flash9e.ocx reported as a threat... Need help
Hi,
I just installed Kaspersky Internet Security 2009 on my
VISTA Ultimate 32 bits SP1 laptop. After running an analysis it
reported among a total of 3 files the following one as an important
threat:
c:\windows\System32\Macromed\Flash\Flash9e.ocx
What can I do with this?
- Do I simply need to upgrade? If so how?
- Do I put it to quarantine?
- Do I uninstall it? If so how?
- Other recommandation?
Thanks in advance.I would recommend creating a folder in your "My Documents" folder and naming it "Java Programs". This will keep your programs organized and make it easier to find them.
When using the Command line, any commands you enter will not mean anything to the computer unless it knows where to find their corresponding executables. Thus, you must set both the "path" variable and the "CLASSPATH" variable (assuming you know how to get to the "Environment Variables" dialog). The former tells the computer where to find "java.exe" and "javac.exe" along with other essential programs. The latter tells "java.exe" and "javac.exe" where to find your program to compile or run it.
Do the "path" variable first. When you set this, don't just erase everything in the value field because then commands like "ping" and "ipconfig" won't fuction properly. Rather, place the new value at the end of the current value with a semi-colon between them. It should look something like this:
(original values);C:\Program Files\java\JDK\bin\The bin directory should be where your "javac" and "java" executables were installed.
Now for CLASSPATH. You will notice that there is no "CLASSPATH" variable so you will have to create it. After you have created it, give it the path to your "Java Programs" folder as it's value. Then when you begin doing larger projects requiring more than one file, just make a new folder in "Java Programs" and append the path of the new folder to the end of "CLASSPATH" just like you did for "path".
Hopefully this helps clear some things up. -
How can i use flash9 ocx in vb
how can i use flash9 ocx in vb6 it's not working for me.some
error showing
Anil Mathew SIXDAYSWORKShow can i use flash9 ocx in vb6 it's not working for me.some
error showing
Anil Mathew SIXDAYSWORKS -
Flash9.ocx add-on errors
I've been getting alot of these add-on errors lately and it
crashes IE. I've tried reinstalling flash but it hasn't helped. Is
there anything I can do other than disabling the add-on? I would
really appreciate any advice.If you got an error message that says there has been a
problem in the Flash9.ocx, here is how to fix things...
The possible solutions are:
1) update your video drivers. For instance, with a video card
with NVIDIA graphical processor, you can use this address:
http://www.nvidia.com/content/drivers/drivers.asp
Then see if you get the error again
2) If the problem is still there, you'll have to come back to
an earlier version of the flash player. Here is how it is supposed
to be done when everything goes well:
uninstall Flash Player 9 using:
http://download.macromedia.com/pub/flashplayer/installers/8/uninstall_flash_player.exe
then re-install Flash Player 8 or 7 using:
http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp8_archive.zip
3) if the uninstallation fails, here is the manual way to do
achieve a similar result but that should always work:
Go in the following folder:
C:\WINDOWS\system32\Macromed\Flash
Change the name of Flash9.ocx file into _Flash9.ocx (be sure
IE is closed first)
Dowload this zipped file:
http://www.robostrike.com/pub/utils/Flash9.zip
unzip the file and place it in the above folder,
name it Flash9.ocx (the file is in fact a copy of Flash8a.ocx
and this way, it will be used instead of the bugged version 9)
Restart Internet Explorer => congratulation you are now
back in version 8 and everything should run perfectly fine!
As for my computer: problem solved! -
Can't delete Flash9.ocx
While trying to solve some Flash/IE installation problems, I
have discovered that I can't delete the following file:
C:\WINDOWS\SYSTEM32\Macromed\Flash\Flash9.ocx
I've tried safe mode, "move on boot", BartPE, and nothing
will get rid of this file. The read only attribute is set and
cannot be changed....does anybody have any ideas as to what might
be causing this?
Thanks,
RobUntil I installed Flash 9 I've had no browser issues that I
could attribute to the earlier version (8) of the flash player I
used. However since initial install in mid-August, that's no longer
the case.
The first indication was a persistent message window re:
"flash9.ocx' file" while online gaming at the Pogo (EA) game site.
The url is www.pogo.com; but I have a member signon so I'm not sure
the error scenario can be reproduced explicitly. It did not crash
IE and I could just click "OK" and the game would continue.
Sometimes message would show up after I logged off. I was able to
browse other websites without encountering any flash errors and/or
browser crashes. Approximate error message: "Internet Explorer has
encountered a problem. File : Flash9.ocx"
I created a win/checkpoint prior to installing the Flash 9
player, so I went back and restored. No relief just stranger stuff
-- the win/restore obviously does not back off the player.
I no longer get the weird messages on Pogo but other sites
that exhibit the following scenario:
Flash content won't display;
Website displays Macromedia button & instructions to
update to latest version;
Clickable link to Macromedia (
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash).
(Specific url prompting download:
http://www.zillow.com/search/Search.htm?citystatezip=85025&mode=browse)
I did bite the bullet and re-install the player (after
another checkpoint) but the above error at Zillow persists;
regardless of win/restore. I still see the same information on the
player version, file locations, file names, and file versions.
The Adobe browser test for the Flash player version I'm using
shows: 9.0.16.0.
The flash.ocx files (v 6.0.79.0) are in both folder locations
(Windows\ServicePackFiles\i386 and
Windows\System32\Macromed\Flash).
The flash9.ocx file (9.0.16.0) is in the right location too.
My OS is winxp/home(sp2); browser is IE 6.0; maintenance is
current-to-date.
I'll proceed with your advice regarding the uninstall but I
hope a Macromedia-supplied solution arrives soon -- even after
clearing cache, temp, etc. there appears to be some sort of version
conflict going and it effects browser performance. -
StopAllSounds created in class
I have got 2 sounds created and started in functions in a
class. When I try to stopAllSounds, it does not stop the sounds. Do
I have to reference to the stop the sound inside each function? My
code is attached (.as and .fla) fi somebody would be willing to
help.
Cheers
ottiattempt #2 (first post disappeared into the ether)
works OK like this (java 1.4.0_01)
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
class Testing extends JFrame
public Testing()
setLocation(300,200);
setSize(400,250);
setDefaultCloseOperation(EXIT_ON_CLOSE);
JTabbedPane tp = new JTabbedPane();
tp.addTab("tab 1",new TabPanel());
tp.addTab("tab 2",new TabPanel());
tp.addTab("tab 3",new TabPanel());
getContentPane().add(tp);
public static void main(String[] args){new Testing().setVisible(true);}
class TabPanel extends JPanel
public TabPanel()
final JTextField tf = new JTextField(10);
final JComboBox cbo = new JComboBox(new String[]{"0","1","2"});
add(cbo);
add(tf);
cbo.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent ae){
if(cbo.getSelectedItem().equals("1")) tf.setEditable(false);}});
} -
StopAllSounds vs. new Streaming Sound not playing
In my timeline, I'm using a stopAllSounds action (because the
user could be coming from anywhere in the movie and I need to stop
whatever narration might be playing), then, in the next frame, I'm
trying to stream a new sound. My problem is that the streaming
sound doesn't play. I've tried adding a few frames between the
stopAll Sounds action and the start of the streaming sound, but
that doesn't seem to be the problem. Any ideas would be greatly
appreciated.
- BillGI was about to try your suggestion, but after sending a few more test emails, I discovered that it does in fact play the sound sometimes. I sent about 20 test emails, and they were all received using the "idle" command, with about 75% of them playing the sound. There was a 5-10 second delay between the messages being received and the sound playing that I don't remember from Snow Leopard, but I'm not positive about that.
It shouldn't be the actual sound that is the issue, being that it is played sometimes, but I still don't know why it's not playing every time. I tried receiving messages with the app running in the background, with it minimized, and with it as the active window, but I couldn't find any specific instance that caused it to not play the sound.
I wasn't having this issue in Mail 4. It didn't start until I installed Lion, which I did a clean install of, if it matters.
I'm still open to thoughts on this, and thank you for your help. -
Unable to run flash9 on a mac book
I have downloaded flash9 and it confirms it has downloaded ok
- but i cannot find the application anywhere. I am on a mac book
and have checked safari is the latest. I have searched the mac and
the only application i can find is the flash9 installer!! Which
ofcourse i have run...
I have tried uninstalling it, rebooting and trying again -
but no luck
Can anyone help?
Thanks
SunnyHave now found the macromedia file in the
library/applications but when i try and run it (i have moved it to
the applications file) it asked me what application i wish to use
to run it!!
Sorry - new to all this - trying to run the joseph schools
competition for my son - any help appreciated
Thanks -
IE7 Flash9 install fix that worked!
I've tried nearly every solution mentioned all over adobe, ms
and elsewhere to no avail.
I must have uninstalled and reinstalled, deleting folders,
reg fixes, etc, etc a hundred times.
Another user had linked to this tech article in another post
(sorry lost the post), thought I'ld put it up top.
It's the only thing that allowed IE7 to install Flash9
successfully. Thanks other user!
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=fb1634cb
p.s. I work on alot of pcs, I have only seen this
installation problem on machines
that previously had some version of Flash and updated to IE7.
Virgin builds of fully
updated XP with IE7 seem to install Flash 9 just fine.
just sayin ;)I live in a country which does not have iTunes Store but I can purchase a voucher from eBay. However according to Q&A from Apple:-
"Gift certificates and gift cards purchased on the iTunes Store are valid for use only in the country in which they were purchased. Gift certificates purchased in the United States may only be redeemed by residents of the United States."
Not only that, those who have access to iTunes Store are making unreasonable profits from selling those vouchers. A US$15 iTunes Store voucher is sold for $18.
Can anyone CONFIRM 100% that the voucher I purchase from eBay actually can work? I doubt because before I can redeem the voucher from iTunes Store, I have to register first. And to register, I need a credit card which has a billing address in the US or a country which already has iTunes Store. -
I am still having problems with Flashplayer showing videos
for a second or two, and then disappearing. The audio plays just
fine. Javascript is enabled on the browser. When I tried to use
Flash9 with the Flash8 activex control suggested by SJesMe, I got
the same result.
I also tried the fixes offered by thegate55, but then the
message would pop up that I had an earlier version of Flash
installed and to view the video, I needed to install the newest
version of Flash.
When I called Adobe, they stated that they do not provide
support for this issue. Does anybody else have any suggestions to
resolve this problem?
- user86I have the same problem. Ive had it for god knows how long.
Sometimes flash fixes itself a it seems and it works for a couple
of days if Im lucky and then it will go back to doing the same
again. I know how annoying and frustrating it is as most sites have
embedded flash content and you cant see anything. I phoned Adobe
too but all they told me was that they cant help me anymore than
what is given on their website. WAT A LOAD OF CRAP!!! If you check
much earlier on in this forum, I have posted this many times but
not a single solution has come up yet. I will let you know if
anything works for me!
Maybe you are looking for
-
Adobe Reader And SharePoint Workflow: How To?
Hi all, We are using SharePoint 2010 as our collaboration portal. Our Marketing department wants to use feedback workflows on PDF documents. The PDF documents can be commented and all reviewers should be able to do that in turn or parallel. We can st
-
Adobe Forms central it useful for sap Consultant
HI all, Last few years in sap Consultant and i worked SAP Adobe forms this Adobe Forms Central it useful for sap Consultant
-
Disable iTunes automatic updates
hi guys i updated my iTunes 10.7 to 11, used it for a few hours trying out all the ''new functions'' , again i hated the white background ( already hated it when it was first introduced a couple of years ago... it just cooks my eyes after a while
-
Premiere Pro, Edit Original ... How? Metadata?
Greetings! I've been given a project that's a mess in After Effects. Think of it as a Power Point slide show, but done in After Effects. I decided to export all of the slides as MOVs and edit them in Premiere. I love the "Edit Original" feature as I
-
Need a help in PL/SQL array
Hi below is my requirement I need to generate value AA to ZZ. I know we can do with this in squencer, But I want this in Array such that if the value passed is AD the return should be AE.. if value sent is AZ then it should return BA Inner loop handl