Flat file as a source table in my mapping

Hi all..
I am using owb 10gR2. when i debug with flat file and one target table,it is throwing error as it doesn't support flat file,you must access it through exteral table.
But i dont want to use the external table. i want the flat file to be my source file.
pls help me out.
Thanks in advance,
Bharath.
Edited by: user11342336 on Aug 11, 2009 4:26 AM

hi sutirtha. you have already solved one my of issue. hope you will solve this too :)
yes,it doesn't support flat files,but i am getting the following error,
"DBG1047 :Mapping flat file operators are not supported as sources when running mappings in debug mode. To access flat files use external table operators"
but i want to run or debug it without using external table operators.
Thanks,
Bharath,

Similar Messages

How to convert the flat file data into sap tables . ?

how to upload flat file data into sap table . before upload mapping is also there in some filds . any one can give me some steps how to upload and mapping . ?

Hi
See the sample code
REPORT zmmupload.
Internal Table for Upload Data
DATA: i_mara like MARA occurs 0 with header line
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
    IMPORTING
      file_name     = p_file.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
    EXPORTING
      filename                = p_file
      filetype                = 'DAT'
    TABLES
      data_tab                = i_mara
    EXCEPTIONS
      conversion_error        = 1
      invalid_table_width     = 2
      invalid_type            = 3
      no_batch                = 4
      unknown_error           = 5
      gui_refuse_filetransfer = 6
      OTHERS                  = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Upload the Data from Internal Table
MODIFY MARA from TABLE i_MARA.
Regards
Anji.

Extraction, Flat File, Generic Data Source, Delta Initialization

Extraction, Flat File, Generic Data Source, Delta Initialization
I have couple of questions regarding data extraction.
1.     If you have Data Source a Flat File e.g. Excel file I know that you have to create Data Source at BW side. How do you upload updates, by selecting Delta Update when executing next Data Load? Do you ever u201Cconvertu201D this Excel file into Application Tables to become SAP Source 
2.     Can you please give me example of situation where you had to create Generic Data Source? What is difference between Time Stamp, Calend. Day and Numeric Pointer. Which one is most common to select?
3.     I read somewhere that Generic Data Source does not have Setup Table. I thought that you have to have Setup Table in order to load transaction Data otherwise you will lock the Application Tables. Where am I going wrong im my thinking please?
4.     What are steps in terms of IP before, under and after Delta Initialization. I belive that you can do two ways:
Full Update - Initialize Delta Process (without Data Transfer) u2013 Delta Update or
Initialize Delta Process (with Data Transfer) u2013 Delta Update
Am I right? What is most common method and why?
5.     If you want to add a filed in Data Source after 6 month using it, you want to do it without re-init Delta Queue. You add field in RSA6, then provide info for ABAP to populate new filed (info u2013 name of Data Source, Extract Structure, field added, name of Application Table which contains the field). How does it work now as there is no SetUp table it has been deleted after Initialisation? How does Delta Queue know that it is going to receive data which has been expanded by one field or it may does not need to know at all?
THANKSSSSSSSSSs

Hi,
1. If you have Data Source a Flat File e.g. Excel file I know that you have to create Data Source at BW side. How do you upload updates, by selecting Delta Update when executing next Data Load? Do you ever u201Cconvertu201D this Excel file into Application Tables to become SAP Source
Once you create Datasource for A flat file extraction then it is file source system specific hence you cont change to Application table source Data source
In info package you can change the source as application server instead of desktop no need to change the DS
2. Can you please give me example of situation where you had to create Generic Data Source? What is difference between Time Stamp, Calend. Day and Numeric Pointer. Which one is most common to select?
When we don't find any standard extractor then we can go for Generic(if i want information sales along with finance information in a data source then generally we dont get standard one hence we can go for generic DS)
Check the below link for More about generic DS .
http://wiki.sdn.sap.com/wiki/display/BI/Generic+Extraction
for Delta capturing you can use
Timestamp(if the table has time stamp filed so it can stamp the last changed record in that table hence it is easy to get delta based on the time stamp)
Calday- (If the table doesn't have the Timestamp filed then search for Calday where you can stamp the delta based on the date when documents are changed )
Numericpointer : If the table doesn't above both then we go for this option where you can the numeric value change stamp )
3. I read somewhere that Generic Data Source does not have Setup Table. I thought that you have to have Setup Table in order to load transaction Data otherwise you will lock the Application Tables. Where am I going wrong im my thinking please?
Generic datasource nothing but we extracting data directly from the database table without any interface between the application/systems
4. What are steps in terms of IP before, under and after Delta Initialization. I belive that you can do two ways:
Full Update - Initialize Delta Process (without Data Transfer) u2013 Delta Update or
Initialize Delta Process (with Data Transfer) u2013 Delta Update
Am I right? What is most common method and why?
Correct
5. If you want to add a filed in Data Source after 6 month using it, you want to do it without re-init Delta Queue. You add field in RSA6, then provide info for ABAP to populate new filed (info u2013 name of Data Source, Extract Structure, field added, name of Application Table which contains the field). How does it work now as there is no SetUp table it has been deleted after Initialisation? How does Delta Queue know that it is going to receive data which has been expanded by one field or it may does not need to know at all?
Once you add the new field to structure(DS) you will get the data as on date onwards not historical data hence what is the concept of setup table ( delta records come from the Delta Que not from the setup table )
If you want histaric data to new field then you need to setp table deletion ...etc...
Hope it is clear..
Regards,
Satya

Flat file as a source - now more confused then before.

Sorry to open this topic again - i just got confused to what needs to be done (i did read all of the posts on previous topic - honest!) got confused to who did what and how it needs to be done. it's hard to be stupid sometimes :(
here is what i have:
OWB server (target + runtime repository) = RHEL 4
Source (the location of the flat files) = shared drive/folder on Windows
OWB client (my machine) = Windows (unfortunatelly)
I followed the steps described in
http://download-uk.oracle.com/docs/cd/B31080_01/doc/owb.102/b28223/def_flatfiles.htm#CHDHBECD
created samba mount point from OWB server to the Source files:
/mnt/folderA/folderB/source_file.txt
mapped shared drive from the source onto my machine
Z:/folderA/loderB
created location for the flat files in OWB:
TEST_LOCATION = \\windows\folderA\folderB\
imported flat files into OWB (had to go through the sample)
created the map 'TARGETLOAD' - simple load the data from the flat file into the table
validation produced the following message:
VDL-2398: No data file specified. Generated code will use the sampled file name and the file location 'TEST_LOCATION'
--which is fine isn't it? it should be using this file in that location
generation went OK.
deployment produced this error:
SQL*Loader-500: Unable to open file (/u01/app/oracle/product/10.2.0/owb_1/owb/bin/unix/\windowsfolderAfolderBTARGETLOAD.ctl)
SQL*Loader-553: file not found
SQL*Loader-509: System error: No such file or directory
i checked this directory - there are 2 files there that were created by OWB:
\\windows\folderA\folderB\TARGETLOAD.ctl
\windowsfolderAfolderBTARGETLOAD.log
Could anyone please enlighten me on what is going on? What do i have to change/amend/edit/tweak in order to solve this? all i want is to be able to load the data from flat file on the source windows box into the table in OWB server.
Any help/thoughts would be greatly appreciated.

Hi GB
Thank you very much for your reply.
I cannot use external tables - my superiors decided agains it, so i am lambered with external files (even jedi mind trick didn't work!).
What i do is import external files from windows box. The location is specified as \\windows\forlderA\folderB
--Mount the drive onto unix then register the files location as the unix path.
i have a samba mount point from unix box to this windows location. But what i can't do is to select is as a location. i even tried to mapping this mount point onto windows box, so that it looks like \\unix\mnt\folderA\folderB - and of cause when i execute - i get the same error.
I even tried configuring the sql loader (right click on map and select configure -- create), but i cannot do it even that way. coz everytime i try to create - OWB automatically assigns windows path to it.
IT told me to let them know what i need and they will create it (map the drive etc) the problem is - i can't think of how to do it! and i do not have a priveleges to start 'trying things out'... well they say if i break their security one more time -i am in trouble!
I know it sounds sad, but could you please let me know what i need to have/to do in order to make it work.
Hope you do not mind my request and thank you very much for all your kind help and advise
Kind Regards
Vix

How to store the flat file data into custom table?

Hi,
Iam working on inbound interface.Can any one tell me how to store the flat file data into custom table?what is the procedure?
Regards,
Sujan

Hie
u can use function
F4_FILENAME
to pick the file from front-end or location.
then use function
WS_UPLOAD
to upload into
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'   "Function to pick file
    EXPORTING
      field_name = 'p_file'     "file
    IMPORTING
      file_name = p_file.     "file
CALL FUNCTION 'WS_UPLOAD'
   EXPORTING
     filename                       = p_file1
    TABLES
      data_tab                      = it_line
*then loop at it_line splitting it into the fields of your custom table.
loop at it_line.
          split itline at ',' into
          itab-name
          itab-surname.
endloop.
then u can insert the values into yo table from the itab work area.
regards
Isaac Prince

Is a database table required for temporary interfaces with flat file data set source ?

Folks, this is the situation I have in ODI 11.1.1.7
I have a temporary interface (yellow), called MJ_TEMP_INT, that pulls data from TWO data sets in the source into a temporary target (TEMP_TARG). The catch is one data set pulls from a from a table whereas the other data set pulls from a flat file. A union is done on the data sets.
I then create another interface, called MJ_INT, that uses the MJ_TEMP_INT as a source and the target is a real db. table called "REAL_TARGET"
Two questions:
When I execute my second interface (MJ_INT), I get a message "ORA-00942: table or view does not exist" because it is looking for a real db table TEMP_TARG. Why must I have one ? because I am pulling from a flat file ?
On my second interface (MJ_INT) when I look at the property sheet of my source interface MJ_TEMP_INT (yellow), the checkbox next to "Use temporary interface as Derived table" is DISABLED. Why ? Is is also because my temporary interface is pulling from a flat file ?
I have attached a file that shows a screen shot of my ODI studio.
By the way, IF my temporary interface source has only one data set pulling from a db. table into a temporary target table, say called MJ_TEMP2_TARG, and then when I use this temporary interface as a source to another other real db. target table (REAL2_TARGET), THEN, every thing works. ODI does not require me to have a real db. table MJ_TEMP2_TARG and the checkbox for "Use temporary interface as Derived table" is NOT DISABLED and my REAL2_TARGET table gets populated.
Thank you in advance.
M. Jamal.

Thanks SH. I thought so.
Though I understand the reason to materialize the file in a staging area, but that almost defeats the purpose of having a temporary interface in this case if we have to save the data in a permanent db. table first. I assume the db. table sticks around and is not automatically dropped once the interface executing ends. If the db. table sticks around then I also must truncate it first before executing the temporary interface each time. Right ?

How to import flat file as a source in DAC Client

Dear All,
I am doing some R&D,I have a problem that how can i import the flat file in DAC client which i am using as a source.
Can any one please explain in detail step wise.
Regards
Tarang Jain

Hi Tarang,
How long will it take to run the sample execution plan? Since when i run 'CRM Automotive' EP, it runs for more than 3 hours and still it is running. My system config is 1GB RAM with windows os. I have also opened the DAC server and client in console mode and I m not able to see any errors. I have only got only the task 'Load row into run table ' completed successfully and next 10 are in Running stage from the past 2 hours.
My DAC client shows continously the below shown message for 1 hr.
'Sep 30, 2008 3:52:59 PM com.siebel.analytics.etl.client.data.model.ConnectionHan
dler getConnection
INFO: Getting connection for: Model structure for W_ETL_RUN_STEP (RUN_STEP) (cur
rently 0)
Sep 30, 2008 3:52:59 PM com.siebel.analytics.etl.client.data.model.ResultSetPars
er logMinutesSeconds
INFO: Query took 0 minutes, 0 seconds
Sep 30, 2008 3:52:59 PM com.siebel.analytics.etl.client.data.model.ConnectionHan
dler cleanUp
INFO: Returning connection for: Model structure for W_ETL_RUN_STEP (RUN_STEP) (c
urrently 1)
Sep 30, 2008 3:52:59 PM com.siebel.analytics.etl.client.data.model.ResultSetPars
er logMinutesSeconds
INFO: Populating DACObjects took 0 minutes, 0 seconds
Sep 30, 2008 3:52:59 PM com.siebel.analytics.etl.client.data.model.DACChildTable
Model setParentID
INFO: PARENT ROW ID IS: 95D45F88DBB268B3D19DB71B4E42D3FF
Sep 30, 2008 3:52:59 PM com.siebel.analytics.etl.client.data.objectcomponents.Mo
delStruct setQuery
INFO: SELECT
RUN_STEP.DEPTH
,RUN_STEP.STEP_NAME
,RUN_STEP.STATUS
,RUN_STEP.START_TS
,RUN_STEP.END_TS
,RUN_STEP.STATUS_DESC
,RUN_STEP.PHY_SRC_NAME
,RUN_STEP.PHY_TRGT_NAME
,RUN_STEP.PHY_FOLDER_NAME
,RUN_STEP.SERVER_NAME
,RUN_STEP.PHASE_NAME
,RUN_STEP.EXEC_TYPE_NAME
,RUN_STEP.SUCESS_ROWS
,RUN_STEP.FAILED_ROWS
,RUN_STEP.ERROR_CODE
,RUN_STEP.DEFN_STEP_WID
,RUN_STEP.ROW_WID
,RUN_STEP.LAST_UPD
,RUN_STEP.APP_WID
,RUN_STEP.RUN_WID
,RUN_STEP.STEP_WID
,RUN_STEP.PHY_SRC_WID
,RUN_STEP.PHY_TRGT_WID
,RUN_STEP.PHY_FOLDER_WID
,A_W_ETL_APP.ROW_WID
,A_W_ETL_APP.NAME
FROM W_ETL_RUN_STEP RUN_STEP
INNER JOIN W_ETL_APP A_W_ETL_APP ON RUN_STEP.APP_WID=A_W_ETL_APP.ROW_WID
WHERE
(RUN_STEP.RUN_WID='95D45F88DBB268B3D19DB71B4E42D3FF')
ORDER BY
RUN_STEP.START_TS ASC,
RUN_STEP.DEPTH ASC'
Any comments on this?
I had also copied the CRM Analytics source file into the "D:\Informatica\PowerCenter8.1.1\server\infa_shared\SrcFiles"
as metioned in Appendices ' Configuring Universal Adapter for CRM Analytics'.
With Regards,
Prads

Flat file as a source in a mapping

Dear all
i noticed that when you create a mapping with a Flat File Operator as a source, the OWB generates SQL* Loader code instead of PL/SQL package.
Is there any parameter you have to change in order to generate PL/SQL code or, if not how can you convert SQL* Loader code into PL/SQL?
Any help would be appreciated

Hi,
OWB generates SQL * Loader code for Flat File operator, if you try to change the configuration parameter to PL/SQL it results in error.
External tables would be a better choice as it reduces the processing time, disk space required and also makes it possible to use SQL and other complex transformations.

Flat file conversion from source to destination

Hi
I'm new to SAP and was wondering if someone could help me with the following:
Have a source text file (fields are FirstName and LastName) and would like to run it through PI and get an output as a flat file with the FullName and LastName concaternated.
Example:
SourceFile.txt:
Jason
Gates
TargetFile.txt:
Jason Gates
The mapping is working if I test it using the test feature in Enterprise Services Builder's test mapping feature without any files.
How can I execute the mapping using plain text flat files?
Thanks in advance!
Additional information:
Source file has structure:
First Name
Last Name
Target file has structure:
Full name
The object is to:
u2022 Create data, message, service interface structures for source and target to represent the source and target.
u2022 Create the mapping program between source and target.
u2022 Test mapping works internally in the builder using the internal test facilities.
u2022 Configure the directory to pick up the source file, and content covert to xml using sender file channel
u2022 Configure receiver determination, interface determination, receiver agreement, and target file channel
u2022 Test using files place on the file server
u2022 Trouble shoot using the runtime work bench.
u2022 Once this work, increase the complexity e.g. multiple people in the source file, etc
Edited by: NetSpike on Feb 17, 2010 2:25 PM

https://wiki.sdn.sap.com/wiki/display/XI/FLATFILETOFLATFILE

Dynamic flat file name as source

Hi All,
I working on ODI 11g 11.1.1.3 version.
I have Flat file say ABC01 as source, flat file was successfully load into target.
But next day new file say ABC02 with same structure was generate from client.
Every day new file is generate say ABC03, ABC04 and so on.
how to use this file to load data, without changing file name.
dynamically can it is possible.
Please give me suggestion.
Thanks in advance
Prashant

Hi Prashant,
You can achieve this by doing the following :
1. Create a variable Called FILE_NAME
2. Go to your file datastore and replace the Resource Name with variable #FILE_NAME. So you need to pass correct file name to the variable.
3. To get the filename into variable , you can look into the following thread
Read FileNames in Directory
Hope it helps

Need to write a progrm to upload flate file in my z table

Hi all ,
I need to write a progrm to upload flate file from presentation or application server in my z table.Please guide me to do so.
Regards,
Ranu

You have sent this via Abuse Report:
Please close my thread , so I can post new. I'll search before asking and wont ask small questions again.
Considering that you have agreed to stick to the Rules, I'm closing this question so that you can open one new question. Based on how you carry on from here, I'll decide what to do next. If you behave, I'll close your other questions, but if you break the Rules even once, your id will be deleted.

How to upload the flat file records into internal table by position?

Hi
I have a flat file which has 7 records in each row and they are NOT provided with CSV or Tab demilited...
They are continous text without spaces....
but i know the fixed length of each field Eg : 1st field 7 char and seconc field 3 char and so on...
How can i upload this file into internal table by reading positions of each field...I know we can use GUI_UPLOAD and Read dataset and Open dataset...
But please let me know to read the file with the fixed postions and load into internal table...
Thanks in advance
MM

Hi
As per my knowledge i dont think thr is some function module or so to read with a fixed positions.
You can use the below method if you think this is the best way.
Suppose your file has
types : begin of ty_itab,
            field1 type char7,
            field2 type char3,
            field3 type chat3,
            field4 type char3,
            end of ty_itab.
types : begin of ty_upload,
             str type string,
            end of ty_upload.
data : it_itab type standatd table of ty_itab,
          it_upload type standard table ot ty_upload,
          wa_itab type ty_itab,
          wa_upload type ty_upload.
use gui_upload.get the data in it_upload.
here you know that u have first 16 charcters makes a first row n then next 16 charcters next row
Loop at it_upload into wa_upload.
   v_len = strlen ( wa_upload ).
   v_len = v_len / 16.
    You get number of rows per record ,if it is decimal value make it final value if 3.9 make to 4.
    do v_len times.
      wa_itab = wa_upload.
      By this only first 16 characters are moved and respective fields will get a value.or else u can use offset
       wa_upload+0(16).
      append wa_itab to it_itab.
      Now shift 16 characters using shift command in wa_upload.
    enddo.
endloop.
Hope this syntax help you to resolve your issue.May be something i have missed .Right now i don't have sap system to send you the full correct syntax code.
Cheers
Joginder

Populate flat file header substring in table

Hi All, I have multiple flat files which i need to load in a single table.I did that using indirect option at session level.But need to dig out on how to populate substring of header in name column in target table. i have two columns Id and Name. in all input file I have only one column 'id' with header like H|ABCD|Date. I need to populate target like below example. File 1 File2 H|ABCD|Date. H|EFGH|Date.1 42 5 3 6 Target tale: Id Name1 ABCD2 ABCD3 ABCD4 EFGH5 EFGH6 EFGH can anyone help on what should be the logic to get this data in a table in informatica.

Hi All, I have multiple flat files which i need to load in a single table.I did that using indirect option at session level.But need to dig out on how to populate substring of header in name column in target table. i have two columns Id and Name. in all input file I have only one column 'id' with header like H|ABCD|Date. I need to populate target like below example. File 1 File2 H|ABCD|Date. H|EFGH|Date.1 42 5 3 6 Target tale: Id Name1 ABCD2 ABCD3 ABCD4 EFGH5 EFGH6 EFGH can anyone help on what should be the logic to get this data in a table in informatica.

Loading Flat files with into multiple tables using OWB

Hi,
How to implement the following logic in OWB.
LOAD DATA
INFILE 'myfile.txt'
BADFILE 'myfile.bad'
DISCARDFILE 'myfile.dsc'
APPEND
Into TABLE_Awhen (1:1) = 'A'
(Col1 Position(1:1) CHAR,
Col2 Position(2:5) CHAR)
Into TABLE_Bwhen (1:1) = 'B'
(Col1 Position(1:1) CHAR,
Col2 Position(2:20) EXTERNAL INTEGER)
Into TABLE_C
when (1:1) = 'C'
(Col1 Position(1:1) CHAR,
Col2 Position(2:20) EXTERNAL INTEGER)
I am using 10g version of OWB.I tried using the splitter operator.
I am getting the following error when i use the splitter.
An invalid combination of operators prevents the generation of code in a single implementation language (PL/SQL code, or SQL*Loader code, or ABAP code). For example, you may have included a SQL*Loader only operator such as the Data Generator in a mapping with a PL/SQL implementation type. If you designed the mapping to generate PL/SQL code, an invalid combination or sequence of operators prevents the generation of PL/SQL code in any of the operating modes(set based, row based, row based target only). If the mapping contains an operator that generates only PL/SQL output, all downstream dataflow operators must also be implementable by PL/SQL. You can use SQL operators in such a mapping only after loading the PL/SQL output to a target. Detail is as follows:
PL/SQL set based operating mode: Operator trailer_source_txt does not support SQL generation.
PL/SQL row based operating mode: Operator trailer_source_txt does not support SQL and PL/SQL generation.
PL/SQL row based (target only) operating mode: Operator trailer_source_txt does not support SQL and PL/SQL generation.
Both SQL and PL/SQL handlers are not supported by trailer_source_txt as output
SQL*Loader: Operator SPLIT does not support SQL*Loader generation.
ABAP: Operator trailer_source_txt does not support ABAP generation.
Thanks in advance,
VInay

Hi
Splitter can be used ib PL/SQL mappings, but if you use a flat file in a mapping, than it will be an SQLLoader mapping. So I suggest to you to create a mapping which load your flat file into a table, and from this table you load the data into the three table with the spillet in a PL/SQL mapping. Create two mappings.
Or you can use an external table in a mapping with a splitter.
Ott Karesz
http://www.trendo-kft.hu

Flat file should have source field name and value

Hi Friends
I have a scenario of Idoc to Flat file , where in the target structure the field name and value should be present, generally only the value is available in a flat file.The target structure is as below:
for e.g RECTYPE is the Field Name and A is the value.
RECTYPE,A
DATEH,20111101
TIMEH,173125
RECTYPE,B
ORDNUM,4500054536
ORDITM,150
SUPDAT,20090218
PLNQTY,000000006
MATNR,14B300
BATCH,5697
PLANT,3026
DELIVTYPE,PO
SUPPLIER,0000023305
SUPNAME,Deutsche BP AG
SUPADRS,Erkelenzer Strasse 20
SUPCITY,Monchengladbach
SUPPOST,41179
SUPCOUN,DE
TRUCK_NBR,7589
BOND_FLG,X
STG_LOC,PLCL
LINE_ACTION,CRE
RECTYPE,B
ORDNUM,4500056721
ORDITM,10
SUPDAT,20090218
PLNQTY,000000013
MATNR,116703
BATCH,6589
PLANT,3026
DELIVTYPE,PO
SUPPLIER,0000023380
SUPNAME,DOW Belgium NV
SUPADRS,Havenlaan 7
SUPCITY,Tessenderlo
SUPPOST,3980
SUPCOUN,BE
TRUCK_NBR,7589
BOND_FLG,X
STG_LOC,PLCL
LINE_ACTION,CHG
RECTYPE,X
DATEH,20111101
TIMEH,173125
RECORDS,3

Hi,
     NameA.addHeaderLine
Specify whether the text file will have a header line with column names. The following values are permitted:
■       0 u2013 No header line
■       1 u2013 Header line with column names from the XML document
■       2 u2013 As for 1, followed by a blank line
■       3 u2013 Header line is stored as NameA.headerLine in the configuration and is applied
■       4 u2013 As for 3, followed by a blank line
This specification is only permitted if exactly one structure is defined.
regards,
ganesh.

Flat file as a source table in my mapping

Similar Messages

Maybe you are looking for