Flat file content conversion repeating fields

Hello,
I have a flat file where the first three fields are fixed; the rest of the file line is made up of 1 .. n analysis characteristic results. The name of the field (Result) is always the same, but I never know how many results I will have on one line. Could anyone tell me how I might define this in content conversion ? Thanks in advance.
Peter DOUGHERTY.

Sorry,
Of course ... here it is
10059514 22/09/08 8:29:02 20,2 0 0 0 0,30 0 133 0 0 0 0 0 0 0 0 0 0 0
The first field is the Id of the sample
Second field Date
Third field Time
The 4th ... 21st fields a (varying) number of results (here there are 18, but there could be any number from 1 upwards)
Hope it is clearer
Thanks
Peter

Similar Messages

EDI Flat file Content Conversion

Hi Experts,
I have got a question on File Content Conversion, Please have look the following structure, is it possible with FCC or what is the best possible solution for this, which is very big favour to me.
Some information about this structure,
This is EDI message in flat file structure, each segment has got 700 characters as a row, LIN item is repeating many times,
ST ,XQ , N1 , DTM, LIN, P04, N9,ZA , ZA ,ZA , etc are segments, LIN item is repeating, at the end CTT is last segment. Again from ST segment to CTT segment comes 3 more times.
ST 0000001     4444444
XQ H            20100531
N1 xxxxxxxx                            u 00000
N4 aaaaaaaa, kk                  xx87654
DTM600                                                        20100531
LIN           CB224790                        HH002720033676                  PP00027200336760                ZZ0
P0400001000000000         000000000 000000000 000000000000000000000000
N9 VN0000000594
ZA QA238.00000000000CT         LJXX
ZA QN1.0000000000000CT         LJXX
ZA QO000000000000000CT         LJXX
ZA QP210.00000000000CT         LJXX
ZA QS61.000000000000CT         LJXX
ZA QW208.00000000000CT         LJXX
LIN           CB320275                        SS004330033052                  PP00043300330521                ZZ0
P0400001000000000         000000000 000000000 000000000000000000000000
N9 VN0000000594
ZA QA36.000000000000CT         LJXX
ZA QN1.0000000000000CT         LJXX
ZA QO000000000000000CT         LJXX
ZA QP120.00000000000CT         LJXX
ZA QS8.0000000000000CT         LJXX
ZA QW36.000000000000CT         LJXX
CTT00005300000000000000000000 00000000
ST 0000001     4444444
XQ H            20100531
N1 xxxxxxxx                            u 00000
N4 aaaaaaaa, kk                  xx87654
DTM600                                                        20100531
LIN           CB224790                        HH002720033676                  PP00027200336760                ZZ0
P0400001000000000         000000000 000000000 000000000000000000000000
N9 VN0000000594
ZA QA238.00000000000CT         LJXX
ZA QN1.0000000000000CT         LJXX
ZA QO000000000000000CT         LJXX
ZA QP210.00000000000CT         LJXX
ZA QS61.000000000000CT         LJXX
ZA QW208.00000000000CT         LJXX
LIN           CB320275                        SS004330033052                  PP00043300330521                ZZ0
P0400001000000000         000000000 000000000 000000000000000000000000
N9 VN0000000594
ZA QA36.000000000000CT         LJXX
ZA QN1.0000000000000CT         LJXX
ZA QO000000000000000CT         LJXX
ZA QP120.00000000000CT         LJXX
ZA QS8.0000000000000CT         LJXX
ZA QW36.000000000000CT         LJXX
CTT00005300000000000000000000 00000000
Please I am really requesting you get appropriate answer and quick response please
Thanks in Advance
Regards
Sandya

Hi Suresh, Raj,
Thanks for quick reply, but we haven't got Seeburger Adapter in our landscape. Please one small clarification please this message looks to me, we can do with FCC, but i need some experties from you guys.
1. ST segment comes in one line with 700 characters - has got 5 fields 1..1 cardinolity
2. XO segment comes in another line with same length 700 ch, but 8 fields different lengths 1..1 cardinality
10 LIN segment comes in another line 700 characters, but 0..n
Can't we take structure as follows:
Header     --    0..n
    SegID ---    1..1
    field 2 -
    1..1
    field 3 -
    1..1
    field 4 -
    1..1
    field 5 ---      1..1
    Row2   -
   1..1
       SegID -
   1..1
       field2 -
   1..1
    Row6    -
    1..n (for LIN segment)
       SegID ---   1..1
       field 2 --- 1...1
Please can you give me your experties please??
Regards
Sandya

Upload flat file (Content Conversion Parameters)

Hello,
I am still trying to upload a flat text file to XI. Its a non separator file.
Here the error message from the XI adaper engine:
Sender Adapter v1508 for Party '', Service 'IXI_FileSystem_CSV':
Configured at 15:36:12 2005-08-03
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: 
Mandatory parameter 'CONTROL.keyFieldValue': no value found
Here all my settings:
Message protocol: File Content Conversion
Document name: CMA_FILEINPUT1
Document namespace: http://www.xyz/ogsd
Recordset name: RECORD
Recordset structure: CONTROL,1,SEGMENT,*
Key Field Name: SEGMENT.DUMMYKEY
Key Field Type: String (cs) -> default
Fields:
CONTROL.fieldNames:TABNAM,MANDT,DOCNUM,DOCREL,....
CONTROL.fieldFixedLengths:10,3,16,4,2,1,1,...
SEGMENT.fieldNames:DUMMYKEY,DUMMY,LOCATIONID,...
SEGMENT.fieldFixedLengths:12,51,10,18,4,10,
SEGMENT.keyFieldValue:E2BPBULOCM03 (string that occurs in the first field DUMMYKEY of SEGMENT)
The message type looks like this:
CMA_MSGTYP1 1:1
RECORD 1:1
 CONTROL 1:1
 TABNAM
 MANDT...
 SEGMENT 0:unbounded
 DUMMYKEY
 DUMMY
 LOCATIONID...
Why do i get that error message? How to fill Key field name correctly? In my opinion i dont need key fields for CONTROL because of the occurence of one.
Any idea?

Thanks to all. So "Key Field Name" is just symbolic?
Here are my new settings:
Message protocol: File Content Conversion
Document name: CMA_FILEINPUT1
Document namespace: http://www.xyz.de/ogsd
Recordset name: RECORD
Recordset structure: CONTROL,1,SEGMENT,*
Key Field Name: KF
Key Field Type: String (cs) -> default
Fields:
CONTROL.fieldNames:TABNAM,MANDT,DOCNUM,DOCREL,....
CONTROL.fieldFixedLengths:10,3,16,4,2,1,1,...
SEGMENT.fieldNames:DUMMYKEY,DUMMY,LOCATIONID,...
SEGMENT.fieldFixedLengths:12,51,10,18,4,10,
SEGMENT.keyFieldValue:E2BPBULOCM03 (from DUMMYKEY)
CONTROL.keyFieldValue: HRETZU (from TABNAM) 
Both key fields are the first entries in the substructures.
Now this error is coming up:
Sender Adapter v1508 for Party '', Service 'IXI_FileSystem_CSV':
Configured at 16:41:24 2005-08-03
Last message processing started 16:41:24 2005-08-03, Error: Conversion of complete file content to XML format failed around position 0 with java.lang.Exception: ERROR converting document line no. 2 according to structure 'SEGMENT':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
last retry interval started 16:41:24 2005-08-03
length 30,000 secs
What is that for a new parameter(lastFieldsOptional)?

J2SE XML to Flat File Content Conversion

Hi
I've currently got a scenario which sends a flat file to the integration server, it gets mapped and sent to a receiver adapter on a deployed j2se engine.
I'm now trying to convert the xi-xml structured file to a flat file again on the j2se side (the same flat file format it originally had).
My original flat file looks like this -
477
477=AA1
My xml file looks like this -
<?xml version="1.0" encoding="UTF-8"?>
<ns0:ResultMessage xmlns:ns0="urn:xxxx-com:a_test_j2se_filetofile">
<Item>
 <field1>477</field1>
</Item>
<Item>
 <field1>477</field1>
 <field2>AA1</field2>
</Item>
</ns0:ResultMessage>
I am using these content conversion parameters:
xml.addHeaderLine=0
xml.fieldSeparator==
xml.endSeparator='nl'
I get this error on the integration engine (sxmb_moni):
Error while sending by HTTP (error code: 500, error text: Internal Server Error:java.lang.NullPointerException) (See attachment HTMLError for details)
and the j2se adpater log says this:
17:16:32 (4120): Message "13b9d644-54c9-4ffb-0c40-db4c14458d77" of type "application/xml", kind "B" received
17:16:32 (4124): Parsing XML message
17:16:32 (4131): ERROR: Message processing failed with "java.lang.NullPointerException"
What am i missing?

So, now... I did a test configuration in XI and sent your test-payload...it worked.
The J2SE adapter configuration:
File adapter java class
classname=com.sap.aii.messaging.adapter.ModuleXMB2File
version=30
mode=XMB2FILEWITHCONVERSION
#Adress for XMB endpoint -
XI.httpPort=8111
XI.httpService=/file/receiver
#File Adapter specific parameters -
file.createDir=1
file.targetDir=c:/transfer/inbound
file.targetFilename=xmboutput.txt
#file.writeMode=append
#file.writeMode=overwrite
file.writeMode=addCounter
file.counterMode=immediately
#file.counterMode=afterFirst
file.counterSeparator=_
file.counterFormat=00000
file.counterStep=1
#File Content Conversion specific parameters -
xml.addHeaderLine=0
xml.fieldSeparator==
xml.endSeparator='nl'
And here the configuration of the receiver communication channel in the integration directory:
Adapter Type: XI
Receiver
Transport-Protocol: HTTP 1.0
Message-Protocol: XI 3.0
Adapter-Engine: Integration Server
Adressing-Type: URL Address
Target Host: <yourJ2SEip>
Service Number: 8111
Path Prefix:http://<yourJ2SEip>:8111/file/receiver
Authentication Data
Logon data for non-SAP systems
User
Password
That's it... sent your payload and got the wished result:
477
477=AA1
Regards,
Heinrich

File Content Conversion - Key Field Value

Hi Experts,
I am using File to Idoc scenario for my mapping. In the receiver Communication channel, I am using File Content Conversion. My scenario is as follows :
I have a recordset with Header and Line items with Key Field Indicator as 'H' and 'L'. In some cases, the value for this Key Field is coming in as something other than 'H' and 'L'. I need to throw an exception when this Key Field is not 'H' or 'L'.
In the 'Content Conversion' tab, my attributes are as:
Header_Structure.keyFieldValue = 'H' and Line_Structure.keyFieldValue = 'L'. Is there any more attributes that I need to add ?
Please advise. Thanks a lot.
Regards,
Freddy.

>>multiple key field values in FCC configuration i.e Line_Structure.keyFieldValue = H or L
AFAIK it is not possible but lets wait for other experts to comment on this...
>>Can keyFieldInStructure (add, ignore) parameter help me in this case ?
No. this parameter is only used when you want to include key filed in ur XML structure(add) or not (ignore)...
Chk this:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm

File Content Conversion ( avoid fields in conversion)

Hi all
 An IDoc to File scenario , I am doing file content conversion in receiver File adapter.
my message type for file 2 HEADER each having its own substructure
Like 1header
 fieldA
 2header
 fieldC
 fieldD
I want the "1header and its 1 subelement not be converted in file content conversion" 
because its used for dynamic file name configuration, so i do'nt want it to be written on file.
Regards
Ashutosh.r

Rawat,
Yes I know you will get that error. That is the reason why I have told you to add another parameter fixedLengthTooShortHandling as Cut. So add one more parameter in your file receiver communicaion channel: Also I hope ASFD0101 is your strcuture not the field in the strcuture.
ASFD0101.fixedLengthTooShortHandling : Cut
Then I think it should work like a boom.
---Satish

File Content Conversion ignore fields

HI ,
I need to ignore some rows in the middle of the data in File content conversion for exaple
H1,Field1,Field2,Field3
A,GB07,MICHEL,1000
H2,Field3,Field4,Field5
B,GB08,andrew,2000
The above is the sample text file from the source , I need to parse in the below
RECORDset1
<Field1>A</Field1>
<Field2>MICHEL</Field2>
<Field3>100</Field4>
RecrodSet2
<Field4>A</Field4>
<Field5>andrew</Field5>
<Field6>200</Field6>
I need to omit or ignore the H1 and H2 rows from the File Content conversion.,
Please guide me how to achive this using File Content conversion

Hi Krishna,
In case if H1 and H2 is your record type or line type then to ignore line for this type... just do not handle "keyFieldValue" in the content conversion for H1 and H2 record type.
Thanks,
Binod

File Content Conversion some fields are missing

Hello Friends,
I am trying to convert a fixed length flat file to XML.
Here are my parameters
CompanyCodeRecord.fieldNames = field1,field2,....field50
CompanyCodeRecord.fieldFixedLengths = 1,4,15,20...,50 (for all 50 fields)
CompanyCodeRecord.processFieldNames = fromConfiguration
CompanyCodeRecord.lastFieldsOptional = YES
CompanyCodeRecord.endSeparator = nl
If I do not use lastFieldsOptional=YES then the adapter is throwing an exception Error: Conversion of complete file content to XML format failed around position 0 with java.lang.Exception: ERROR converting document line no. 1 according to structure 'CompanyCodeRecord':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
last retry interval started 19:31:08 2005-07-11
If I use lastFieldsOptional=YES then the message does not contain last 8 columns (That means each record is containing only 42 columns).
Please help.
Thanks
SKM

Hi SKM
Go through this blog on sending fixed length flat file
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
and
>>lastFieldsOptional=YES then the message does not contain last 8 columns
lastFieldOptioanl parameter specifies whether the last fields can be omitted (YES) or not (NO) in a CSV structure. If you do not make a specification, the default value is NO.
So i think u should use NO in this parameter.
Hope it helps.
Regards
Arpit Seth

File Content Conversion(SenderFileadapter) fields parameters

Hi all
 I am doing aFile to File scenario,
Using content Conversion at SENDER FILE adapter
my source message type is as :
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Cnet_Source xmlns:ns0="http://abc.com/Cnet">
 <HeaderPayment>
 <First_Payt_Doc/>
 <Beneficiary_email_id/>
 </HeaderPayment>
 <AdviceFormat>
 <Client_Code/>
 <Payment_Document_No/>
 <Document_Date/>
 </AdviceFormat>
 <LineItem>
 <Title1/>
 <Title3/>
 </LineItem>
 <FILENAME>
 <FNAME/>
 </FILENAME>
</ns0:MT_Cnet_Source>
it has 3 structures :HeaderPayment(0,1),AdviceFormat(0,1),LineItem(0,unbounded)
in Recordsetstructure i gave= HeaderPayment,1,AdviceFormat,1,LineItem,1
in FCC parameters i used
HeaderPayment.fieldname... =First_Payt_Doc,Beneficiary_email_id
HeaderPayment.fieldseperator ='nl'
HeaderPayment.endseperator ='nl'
ignorerecordset = true
similarly for rest 2 structure also
my source text file is type :
we0023
[email protected]
xyc
acd
21/05/2007
10034
acccd
payment
i tried alot of options,refering sdn..still on reading the file value are not coming in the designated fields...
Thanks &Regards,
ajay

You are Right i correct it but i sxmb_moni
i get as <HeaderPayment>
<First_Payt_Doc/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
</AdviceFormat>
<LineItem>
<Title1/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<HeaderPayment>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<HeaderPayment>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<HeaderPayment>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<HeaderPayment>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<HeaderPayment>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<HeaderPayment>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<HeaderPayment>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<HeaderPayment>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
<HeaderPayment>
<First_Payt_Doc/>
<Beneficiary_email_id/>
</HeaderPayment>
<AdviceFormat>
<Client_Code/>
<Payment_Document_No/>
<Document_Date/>
</AdviceFormat>
<LineItem>
<Title1/>
<Title3/>
</LineItem>
<FILENAME>
<FNAME/>
</FILENAME>
the header payment should not repeat....
Regards
Ajay

Sender File Adapter: Flat file content conversion to "multileveled" XML

Hi all,
I would like to do following conversion with file adapter:
- Input flat file schema:
A...
B,,,
C:::
- Desired XML form:
<mesage>
<A>
 
 <C>:::</C>
 
</A>
</message
>
All found examples (internet or XI documentation) do offer only "flat" XML option:
<mesage>
<A>...</A>
,,,
<C>:::</C>
</message>
Does anybody have an idea ?
Thanx and regards
Jurica

File Adapters content conversion does not supprot such a nested strucutre currently.
The only format supported is the one shown in ths link,
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Either write a module that will do this conversion or Change the datatye for the source to the format shown in help.sap.
Regards
Bhavesh

File content conversion without field separator

Hi experts,
in my scenario I'm sending a txt file to an external receiver.
Each field of the file must be separated from the others with differents field separators according with the requirement of the receiver, for example:
field1;field2:field3, field4; ecc....
For this reason I've created in the source message many "FieldSeparator" fields. These fields will be populated by ABAP program.
I thought that it was possible to omit parameter fieldSeparator in content conversion, but testing the interface I receive an error because fieldSeparator is missing.
Is possible to omit fieldSeparator or to specify a fieldSeparator null?
The fields in the target file must be of variable lenght, so I cannot use FieldFixedLenght.
The only solution I found is to create in the target message structure a single string with each field concatenated, is the only possible solution?
Thanks
Fabio Boni
Edited by: Fabio Boni on Oct 21, 2010 5:47 PM

Sorry...posting error earlier..
The seperator can be concatenated at the end of each field in mapping.So seperator will be part of field value.
But with receiver FCC, you need to either mentione fieldfixedlenght or fieldseperator.Please check if space is going to to work for you as separator.
Edited by: nagarjuna _s on Oct 21, 2010 6:36 PM

File content conversion: Target Field is optional

I am using FCC in receiver file adapter.
My file is getting generated.
In target structure one field is optional and hence target xml element doesnt have value. hence that field is not there in txt file. with this what happens next subsequent field gets shifted to my optional field place and then i get error field length is not correct.
I want to put 2 spaces if that optional field length is 2 char and then there should be field separator(space) and the subsequent column.
I am already giving fixedfieldlegnth of all the fields.
Pl can anyone suggest how to do this.
thanks,
sharada

Hi Sharada,
Do your normal mapping to the target field that is optional.
Use a If function before mapping the field.
Check if the node is created in usual mapping, else map a constant with 2 spaces.
DO something like this:
Mapping ---------------->
                           equalsS ----> if
constant(empty Value)--->
                  constant(2 spaces)--> then -> tgtField
                   Mapping -----------> else
regards,
P.Venkat

Skip field in file content conversion (file adapter)

hy guys,
I have a log file and want to convert it into xml. that works fine.
the problem is: can I skip some fields that I do not need in the xml with file content conversion
the fields I want to skip are the same in every record of the log file.
thanks.

Ralf,
You can only ignore lines in the begiining of the file using Document Offset option.
If you have the unwanted field in the end of the record and you are in SPS12 (PI 7.0), you can use the option additionalLasstFields in FCC parameters. have a look into the blog /people/sukumar.natarajan/blog/2007/06/12/content-conversion-in-sender-file-adapter--2-new-useful-parameters
Easier, is to ignore those fields in mapping.
Also, you can try to remove those fields using a shell script which can be called from the File adapter.
Regards,
Jai Shankar

File Content Conversion - Error in keyfield Value

Hello experts,
I am doing file content conversion for a file to file scenario. The input file is a csv file which is converted to xml using the file content conversion. The key field of input file is used for implementing conversion.
While testing the FCC, I noticed that if the keyfield value is wrong for a record in the file, the record is ignored altogether without throwing any errors or warnings. Is there any way to notify if any records have been ignored as a result of incorrect keyfield value??
Thanks in advance!
RR

There seems to be NO way to handle it in FCC.
File Content Conversion - Key Field Value
u can think of work arounds by handling it in mapping....
-santosh.

File Content Conversion i.e Flat file 2 Flat file

Hi guys,
I am new 2 SAP XI
and i am trying 2 do "Flat File To Flat File".
Input File contains following data:
Name:varun
Surname:rajaraman
Address:B-2
Employee no:8204
i.e Each Data is in separate Row.
Output File Should contain the following data:
I am varun rajaraman staying at B-2 bearing employee no. 8204.
(name,surname) (address) (Employee No.)
i.e data should be in a single row.
So, i have a problem of reading the data from input file i.e data from each row and transfering it into output file along with which i need 2 insert "i am " ,"staying at", etc.
pls tell me the procedure in detail.
Thanks and regards
santhosh rajaraman

Hi,
Check this links for file content convertion.
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward Points if Helpful

Flat file content conversion repeating fields

Similar Messages

Maybe you are looking for