Flat file to table - send mail report on error

Hello,
I've created simple project - loading data from csv flat file to oracle database table, using this tutorial: http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/odi_project_flatfile-to-table/odi_project_flatfile-to-table.htm. Now, I need to add support for sending mail to this project. Mail, with error descritpion should be sent to Administrator via smtp server when error occurs.
Can you provide any step by step description how to add this feature in my case? I know this should be possible via ODISendMail, but I was unable to find any basic, step by step tutorial. Can you help me?

960949 wrote:
Ok, so is there any other solution to send mail? I found this post: Send Jython HTML Email Error but link to procedure is inactive: https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=HOWTO&id=424304.1
You need to login to My Oracle Support in order to download the procedure code .
For this you need a valid Oracle CSI

Similar Messages

Flat file name from Sender Side Dynamically into subject of Receiver Mail

Hi All,
         I am Using a file to Mail Scenario, My requirement is to get dynamically the file name from flat file of the Sender Side into Subject of Receiver Mail Adapter and attachment of file from the Sender Side. Can anyone help me out.
Thanks in Advance

Hi....
          You can write udf in the message mapping to get the Dynamic file name and map that to the subject of the receiver mail.
DynamicConfiguration conf = (DynamicConfiguration) param.get(
          StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey KEY_FILENAME = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
      // read value
      String Filename = conf.get(KEY_FILENAME);
Regards,
Leela

How to attach two files in the send mail action

Hi experts
I want to attach two files in the send mail action . I tried using ; as a separator but it did not work .
Regards,
Antonio R . Rubalcaba

Thanks Jeremy,
Yes I am contemplating the another threat . I still want to send two files because the two files have very distinct type of information . The first one is operational and the second one is about statistics . Of course that I can send both type of inforrmation in only one file . I just want to save time to the end user and let him select what infomation he wants to see .
Thanks and my best wishes for you and your family ,
Antonio

Conversion of Flat file to tables in oracle

hi
i am doing my project in oracle and i have got stuck up at a point where i have to convert flat files to tables in oracle
Please suggest a solution for the above problem
Regards,
Mahesh

Hi,
Sql*Loader, to load data from file to an oracle internal table
or
External table (from 9i and later), to query directly the file like an other internal table
Nicolas.

Ssis - import data from flat file to table (sql server 2012)

i have create a ssis for importing data from flat file to table in sql server 2012.
but i got the below error for some column in data flow task.
error: cannot processed because than one code page (950 and 1252)
anyone helps~

Hi,
The issue occurs because the source flat file uses ANSI/OEM – Tranditional Chinese Big5 encoding. When processing the source file, the flat file connection manager uses code page 950 for the columns. Because SQL Server uses code page to perform conversions
between non-Unicode data and Unicode data, the data in the code page 950 based input columns cannot be loaded to code page 1252 based destination columns. To resolve the issue, you need to load the data into a SQL Server destination table that includes Unicode
columns (nchar or nvarchar), and convert the input columns to Unicode columns via Data Conversion or the Advanced Editor for the Flat File Source at the same time.
Another option that may not be that practical is to create a new database based on the Chinese_Taiwan_Stroke_BIN collation, and load the data to non-Unicode columns directly.
Reference:
http://social.technet.microsoft.com/Forums/windows/en-US/f939e3ba-a47e-43b9-88c3-c94bdfb7da58/forum-faq-how-to-fix-the-error-the-column-xx-cannot-be-processed-because-more-than-one-code-page?forum=sqlintegrationservices
Regards,
Mike Yin
TechNet Community Support

Loading data from flat file to table

Hi,
I am using OWB 10g R2. I have to develop a map which loads data from flat file to table.
1. I have created a .csv file.
2. Import that into OWB by Module Wizard.
3. I have created one external table, which use the .csv file.
After that what I have to do for successfully loading the data into table.
Regards,
Sanjoy

Hi Sanjoy
You can building a mapping to move the data from somewhere to somewhere else. More specifically;
1. create a mapping
2. add external table to mapping
3. add table to mapping for target (it can be unbound)
4. map from external table ingroup to target table ingroup (all columns will be mapped)
5. if target table was unbound right click on target table and click create and bind
This is a basic mapping you can have for this scenario. There is a post here which does something like this, but it will create a File to Table mapping which will use SQLLoader.
http://blogs.oracle.com/warehousebuilder/2009/01/expert_useful_scripts_from_simple_primitives.html
Cheers
David

HT201359 Yesterday I buy 99 usd point from game ! But the game system say cant pass the payment ! But today iTunes send mail report say the payment is go over !

Yesterday I buy 99 usd point from game ! But the game system say cant pass the payment ! But today iTunes send mail report say the payment is go over ! So ?the payment ?

Months of impecable service form BT as an option 3 customer. (I've even recommended BT to people)
but
For the past 2 weeks peak traffic has murdered my connection.
I can get 14mbit off peak, and it used to drop to about 7-9 at peak times.
Now its down to 1-2mbit at peak times. (no i haven't breached FUP as I check my btinternet inbox for the 80GB warning)
I think its resonable to experience drop off but 90%!!!
BT advertising says fast speeds at peak times. less than 2mbit is not fast. (that the governments minimum standard!!!)
I don't know how to procede because when I'm experiencing these issues if I ring up I will end up waiting so long to speak to someone (because its peak time) the concection wiill be better again.
I can think of no recourse other than to approach trading standards...
Guarnetee me 5mbit at peak times (enough to stream HD iplayer) and I'd be happy
That is what BT vision customers are in essence are getting + what ever their PC is using.
Fair usage? what about Fair Supply.

An error occured while sending mail: SMTP server error. The server responded: (null)

I'm getting this set of error messages intermittantly:
<P>
An error occured while sending mail: smtp server error
the server responded: (null) contact email admin
for assistance
other message
an error occured while sending mail: smtp server error
the server responded: intermail,
end with quote.quote contact email admin
for assistance
<P>
This problem may occur at low-use times when Messaging is installed with the
Trend virus protection software on the same system.
<P>
Change the version of the Trend software from 3.0 to the older 2.62 version.

It's possible that your provider has made a change.
I think STARTTLS usually is used with port 587, instead of the standard SSL port 465.
Could you look up your provider's current SMTP settings to see whether your "Outgoing Server" settings need to be updated? If it's difficult to translate between your provider's help page and Thunderbird's dialog controls, you could provide a link to your provider's help page.

XML to Flat File DB Table So I and Others Can Use SSRS for Reporting

I'm using a program called Orbeon Forms to quickly create and distribute forms on the local network.
The program just recently got updated to Version 4.6 so as to use SQL Server DB as a backend. (I was using MySQL in a lower versions)
The data created when you submit a form into the database is held in xml fomat in one of the columns. (see below).
I am trying to create a separate table, to pull that data from the xml column (for that particular form) and place it in to a seperate table using the xml tags as columns.
I have no idea where to start or how to do this. Please keep in mind I'm a novice when it comes to sql server (but I do know how to do select statements :-)....
Is this very difficult to do? If it is (for me at least) where can I go to get someone to do it for me along with the documentation to do it? I was also thinking of a way to create a trigger on the Orbeon table (this is how it is setup currently in
the MySQL database) to automagically insert any saved form data to the new form data table. Is this also difficult to do? And can I have a trigger for each form I create on the table?
If anyone can help, I'd appreciate it. Thanks.
I would eventually like to add the form data from the old MySQL database table into this new Orbeon table but it appears the upgrade also added two extra columns. I figuring once in the Orbeon table then I will have to run whatever statements to place into
the separate table so I can use the data.
Randy Marrero

Erland thanks for the reply. Even after reviewing the link you sent I'm still having problems. Guess that is why I'm not a programmer. Anyway I've create a test data form xml I've created and it is copy and pasted below.
Again I'm only really interested seeing if I can get the information out of the xml and create it in its own flat file table. I keep reading that creating a trigger (when the form gets submitted into this database in the xml format, an on insert trigger
would take all the data submitted and inserted into another table with just the data, into separate columns)  for this is the best way but I'm not sure how to do this either. I have a copy of what the MySQL trigger would look like but keep running
into errors when I try to run it in SQL Server. Also the issue with how I would create another trigger if / when I create another form. I read somewhere I can only create one on insert trigger per table, still don't know this to be true. Anyway below
is the xml as it is in the xml table in the database.
XML STARTS HERE------------------
<
formxmlns:oxf="http://www.orbeon.com/oxf/processors"xmlns:xxi="http://orbeon.org/oxf/xml/xinclude"xmlns:xh="http://www.w3.org/1999/xhtml"xmlns:xi="http://www.w3.org/2001/XInclude"xmlns:ev="http://www.w3.org/2001/xml-events"xmlns:saxon="http://saxon.sf.net/"xmlns:xs="http://www.w3.org/2001/XMLSchema"xmlns:odt="http://orbeon.org/oxf/xml/datatypes"xmlns:fb="http://orbeon.org/oxf/xml/form-builder"xmlns:xxf="http://orbeon.org/oxf/xml/xforms"xmlns:xbl="http://www.w3.org/ns/xbl"xmlns:xpl="java:org.orbeon.oxf.pipeline.api.FunctionLibrary"xmlns:sql="http://orbeon.org/oxf/xml/sql"xmlns:p="http://www.orbeon.com/oxf/pipeline"xmlns:fr="http://orbeon.org/oxf/xml/form-runner"xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"xmlns:xf="http://www.w3.org/2002/xforms"xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"xmlns:exf="http://www.exforms.org/exf/1-0">
<
Header>
    <
HHIFR_Patch>/fr/service/persistence/crud/bfp/permits/form/738433584d6c0aff25e0ab8ca1bd99bcc7e10b49.bin</HHIFR_Patch>
</
Header>
<
Permit_Number_Hdr>
    <
Permit_Number>Test123</Permit_Number>
</
Permit_Number_Hdr>
<
Permit_Info_Hdr>
    <
Permit_Date>2014-07-15-05:00</Permit_Date>
    <
Permit_Station>HQ</Permit_Station>
    <
Permit_Employee_Number>0676</Permit_Employee_Number>
    <
Permit_Status>Active</Permit_Status>
    <
Employee_Name>Randy
Marrero</Employee_Name>
</
Permit_Info_Hdr>
<
Applicant_Info_Hdr>
    <
Applicant_Name>Randy
Marrero</Applicant_Name>
    <
Applicant_Phone>8434741099</Applicant_Phone>
    <
Applicant_Email>[email protected]</Applicant_Email>
</
Applicant_Info_Hdr>
<
Mailing-Address-Section>
    <
Mailing_Address>40
Summit Dr</Mailing_Address>
    <
Mailing_Suite/>
    <
Mailing_City>Hilton
Head Island</Mailing_City>
    <
Mailing_State>SC</Mailing_State>
    <
Mailing_Zip>29926</Mailing_Zip>
</
Mailing-Address-Section>
<
Physical_Burn_Hdr>
    <
Physical_Address>35
Summit Dr</Physical_Address>
    <
Physical_Suite/>
    <
Physical_City>Hilton
Head Island</Physical_City>
    <
Physical_State>South
Carolina</Physical_State>
    <
Physical_Zip>29926</Physical_Zip>
</
form>
XML ENDS HERE ------------
Randy Marrero

How to determine the size of a flat file attachment in a mail sender cc?

Hi
I use PI 7.11
I have a scenario where a flat file attachment is being picked up by a MailSender adapter and if the size of the attached flat file is larger that 500 bytes the receiver is A and if the attachment is less that 500 bytes the receiver is B.
I have checked the Context Object list in the Conditions section of Receiver Determination, and it seems, that only the file adapter allows for validation on the file size.
I contemplated an extended receiver determination but the attachment is a flat file which just needs to be passed thru without being converted to an XML document, so my source document is not of XML format.
An other but not very nice way would be to use an intermediate folder to drop the attachment in and from there use a file sender adapter and thus get access to the filesize attribute in my receiver determination, but I would like to avoid this.
Any suggestions?
BR MIkael

Hi
I have decided to make a module, where I plan to place the size of the attachment in the Dynamic Configuration variable "ProcessStep", but to my surprise, it seems that all the context objects in the receiver determination condition section are of type String and hence it is not possible to make a condition where I test for whether the value is smaller than say 500!? Only equal, NOT equal and LIKE are available (EX seems to be disabled as this probably only works in an xpath.
Would one way be to use the xpath expression like this ns1:Main\ProcessStep < 500 where ns1: http://sap.com/xi/XI/System?
MIkael

Failure writing file and Failure sending mail: The user or group name is not recognized.Mail will not be resent.

Dear All,
I am using MSSQL SSRS 2008.
All the reports run properly when viewed via a web browser. However for subscription, I am having a strange
experience.
The subscription having intermitten failure. I need to execute multiple times to get it work.
Following is the exception I am getting:-
Failure sending mail: The user or group name 'xxxxx' is not recognized.Mail will not be resent.
Failure writing file DailyPolicyExportCDN_ST@timestamp : The user or group name 'xxxxx' is not recognized.
Following is the exception I retrieve from log files.
webserver!ReportServer_0-2!1b0c!07/31/2014-05:25:09:: e ERROR: Reporting Services error Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerHttpRuntimeClientDisconnectionException: A client has disconnected from the Report Server Web service application
domain ReportServer_MSSQLSERVER_0-2-130512716074991980. No corrective action is required. An error code has been submitted to ASP.NET to release the connection. The error code is 800708CA. ---> System.Runtime.InteropServices.COMException: This network connection
does not exist. (Exception from HRESULT: 0x800708CA)
Any idea what went wrong?
Thanks in advance

Hi NeoCK,
According to your description, you can access your report successfully, but it fail to send e-mail subscription. Right?
In this scenario, since you can access the report successfully, so this user has permission on report server. Please go to E-mail setting in your Reporting Services Configuration Manager, check if the current user has permission on that SMTP server.
If this is still not working, please recreate the subscription and try again.
Reference:
SUBSCRIPTION
ERRORs : Failure sending mail: The user or group name 'CB_OFFICE\XXXX' is not recognized.
The user or group name 'MYDOMAIN\myuser'
is not recognized
SSRS
2008: Failure writing file ... The user or group name 'domain\user' is not recognized
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Two flat files to table

I have an problem with two plat file to table.
here i am sending two flat file inthe sence just some spcified filedslike
MY first file is Like
Name City
Jerry Delhi
Second file is like
CIty Country
Vincent USA
So these two are club and populate on Oracle table(Target Table)
I taken the two datastores and put it into source when i trying to maping showing
error like "Technology cannot be an expression."
So please can any can give sugession for these.
Thanks advance.

for this problem,
follow the steps:-
1.)drag the two data stores(ur two files) onto source area
2.)join the common column between them just by clicking
and make it sure that in properties of this join execute on option is set to
staging area
3.)now drag the target colum to target
4.)map the coresponding fields from two source data stores to target data store
(again make it sure that in properties of each column of target data storeexecute on option is set to
staging area)
now simply excute...
and it will work

Getting error while loading flat file into table.

I am using ODI 11 and i am trying to load data in oracle database table using source as flat .txt file .
When i execute the interface , i am getting below errors.
ODI-1217: Session INF_FILE2TAB (31022) fails with return code 7000.
ODI-1226: Step INF_FILE2TAB fails after 1 attempt(s).
ODI-1240: Flow INF_FILE2TAB fails while performing a Loading operation. This flow loads target table PARTNER.
Caused By: org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 44, in <module>
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
     at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1074)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
     at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2224)
     at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2168)
     at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:333)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-06564: object DAT_DIR does not exist
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)
Please let me know pointers on this.

Yes,after your sugestion i have created ODI agent and tested the file system connection in topology. It was connected successfully.
but when i tried again for file to table load. Again got below error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 44, in <module>
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
     at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
     at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
     at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
     at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)
     at oracle.jdbc.driver.T4CStatement.executeForRows(T4CStatement.java:1074)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1466)
     at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:2224)
     at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:2168)
     at oracle.jdbc.driver.OracleStatementWrapper.execute(OracleStatementWrapper.java:333)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
java.sql.SQLException: java.sql.SQLException: ORA-06564: object DAT_DIR does not exist
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
     at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2458)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:48)
     at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
     at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)
Please suggest.

Read multi-tabbed excel file attachments from Sender Mail Adapter.

There is a need to read excel attachments from incoming email to a
mailbox. We know we can use Sender Mail adapter to easily read .xml, .txt
or .csv attachments.
For excel attachments we know from SDN that you have to write
adapter modules to handle excel. However the excel file we need to read has
multiple worksheets(tabs) and data may be contained in any of them.
Is it possible to use SAP XI Mailsender adapter to read such a file as an attachment? What kind of module development would we need for this? I am not much of a Java programmer so examples or links to other documentation would help.
Thanks,
Rudra

Rudra,
Use Java Mapping. There is a free java api available called JExcelAPI to achieve this.
Shabarish's blog describes about this. This might be helpful to you
/people/shabarish.vijayakumar/blog/2009/04/05/excel-files--how-to-handle-them-in-sap-xipi-the-alternatives

Mapping flat file and table to a target table

Hi all
I need to join a db table and a flat file as source and output (target) it to a db table. I know we can do it through external tables, however at this juncture we have to do it through flat files only.
Thanks
PC

You'll have load the Flat File data into a dummy table first. Then, You join this dummy table with the other db table in the same mapping.
Any question, lemme know.
Marcos

Flat file to table - send mail report on error

Similar Messages

Maybe you are looking for