FlatFile Schema Change - Message not getting changed correctly.

A biztalk orchestration uses a flatfile schema (with three nodes accountnumber, date, amount) to send the output in .csv format. The generated .csv file presents the data in trheee columns specific to the three nodes.
I am trying to add an new fourth node (Description) to the flatfile schema but the generated .csv file is presenting all the data in single cell instead of displaying using four different columns. I am trying to figure out a solution.
Appreciate any pointers. Thanks

Output file shows the new node with data.
I think somehow the pipeline componenet not accepting the new schema structure. Hence tried the following steps and the solution seems working now.
1) Deleted the pipeline reference in dependent application, stopped the dependent application.
2) Stopped, Delete and re-deployed current application.
3) Dependent application's sendport is enabled with the flatfile pipeline
3) re-started the host instances, and dependent, and current applications.
Flatfile conversion works OK now.
Disabling & reenabling pipeline solved it.
Thanks

Similar Messages

Inspection Lot status not getting changed to LTCA from REL for SubCon scenario

Dear All,
For ERSA material 01 inspection type is active with indicator Post to inspection stock only as it can be purchased. No other indicator is set.
This material can be sent for repairing outside with DAMAGE valuation type (stock provided to Vendor with DAMAGE valuation type).
For SubCon scenario, Purchase Order with Account Assignment Category F and Item Category L has been created.
Once GR using MB01 with 101 movement, consumption posting takes place and as Insp type 01 is active Inspection lot is getting created with status REL CALC.
At this time, DAMAGE stock against Vendor is getting reduced with Qty of 543 movement.
Now when, reversal 102 with MB01 is done against Purchase Order and details are adopted with reference to 101 material document, reversal is taking place, but at the same time respective material doc's Inspection lot status is not getting changed to LTCA. It remains REL only.
For 122 return to Vendor using MBRL also, Insp lot status is not getting changed.
Has anybody faced such issue? Is this standard SAP?
Kindly throw light on the process, is correct process followed?
Regards,
Tanuj Parikh

Thanks.
Thru MBST Inspection Lot status changed to LTCA.
Why system is not cancelling thru MB01?

PO line item condition not getting changed

I am trying to change one condition in PO line item via BAPI_PO_CHANGE. It is not getting changed.
But the return message says Ind. limited tend PO 7100076060 changed, S (type),06 (ID), 023(Number).
The code is
zpo_cond-condition_no = itab-knumv. (1001384871)
zpo_condx-condition_no = itab-knumv.(1001384871)
zpo_cond-cond_st_no   = itab-stunr.(960)
zpo_condx-cond_st_no = itab-stunr.(960)
zpo_condx-cond_st_nox = 'X'.
zpo_cond-cond_count   = itab-zaehk .(01)
zpo_condx-cond_count = 'X'.
zpo_cond-itm_number   = itab-ebelp.(000010)
zpo_condx-itm_number = itab-ebelp.(000010)
zpo_condx-itm_numberx = 'X'.
zpo_cond-cond_type = itab-kschl.(ZI%)
zpo_condx-cond_type = 'X'.
zpo_cond-cond_value = p_per.(6.000000000)
zpo_condx-cond_value = 'X'.
zpo_cond-cond_p_unt = punit .
zpo_condx-cond_p_unt = 'X'.
zpo_cond-cond_unit = unit.
zpo_condx-cond_unit = 'X'.
zpo_cond-change_id = 'U'.
zpo_condx-change_id = 'X'.
APPEND zpo_cond.
APPEND zpo_condx.
      CALL FUNCTION 'BAPI_PO_CHANGE'
         EXPORTING
           purchaseorder                = zpo_header-po_number
           poheader                     = zpo_header
           poheaderx                    = zpo_headerx
        TABLES
          return                        = l_return
          poitem                        = zpo_item
          poitemx                       = zpo_itemx
           pocond                       = zpo_cond
           pocondx                      = zpo_condx .

Hi,
1)In po item give a unique no.(ex:0010) & ITEMX as a new line item with same no will be created.
2) service No. will be system generated. Pass packno = variable(ex:= '0000000001' ),
subpackno=variable +1 (ex: '0000000002' )
thanks & regards.

New changes are not getting reflected in the bam reports.

Hi
I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
Thanks in advance
Laj Abraham

Hi charles
I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
Your help in this regard is highly appreciated.
Thanks
Laj Abraham

Batch Classification Values not getting changed

Hi Gurus,
I am using the following bapi ( BAPI_OBJCL_CHANGE ) to change Batch classification values Eg: Cut clarity etc.
when i pass these values thru the function module in the program it is not getting changed while when i change it through msc2n it gets changed successfully...
I have passed the following values in the parameters of the bapi :
OBJECTKEY            = v_objectkey
OBJECTTABLE        = 'MCH1'
CLASSNUM             = V_CLASSNUM
CLASSTYPE           = '023'
KEYDATE                = 30.04.2010
ALLOCVALUESCHARNEW
CHARACT = CLARITY
VALUE_CHAR = P040
VALUE_NEW   = P040.
Can some one help me solve this....
Needed urgently..
Edited by: NAVIN FERNANDES on Apr 30, 2010 12:31 PM
Edited by: NAVIN FERNANDES on Apr 30, 2010 12:32 PM

Hi Jacky,
I am posting the code here.. Do let me know if u have ne queries:
REPORT ZNAVBATCH.
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS: P_MATNR TYPE MATNR,
            P_CHARG TYPE CHARG_D,
            P_WERKS TYPE WERKS_D,
            P_LGORT TYPE LGORT_D.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
DATA: WA_BATCH TYPE BAPI1003_OBJECT_KEYS,
        WA_ALLOCCHAR TYPE BAPI1003_ALLOC_VALUES_CHAR,
        WA_ALLOCVAL TYPE BAPI1003_ALLOC_VALUES_NUM,
        INT_BATCH TYPE STANDARD TABLE OF BAPI1003_OBJECT_KEYS,
        INT_RET1 TYPE STANDARD TABLE OF BAPIRET2,
        INT_RET2 TYPE STANDARD TABLE OF BAPIRET2,
        INT_RET3 TYPE STANDARD TABLE OF BAPIRET2,
        LV_KEY TYPE BAPI1003_KEY-OBJECT,
        INT_ALLOCVAL TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_NUM,
        INT_ALLOCCHAR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CHAR,
        INT_ALLOCCURR TYPE STANDARD TABLE OF BAPI1003_ALLOC_VALUES_CURR.
WA_BATCH-KEY_FIELD = 'MATNR'.
WA_BATCH-VALUE_INT = P_MATNR.
APPEND WA_BATCH TO INT_BATCH.
WA_BATCH-KEY_FIELD = 'CHARG'.
WA_BATCH-VALUE_INT = P_CHARG.
APPEND WA_BATCH TO INT_BATCH.
CALL FUNCTION 'BAPI_OBJCL_CONCATENATEKEY'
    EXPORTING
      OBJECTTABLE    = 'MCH1'
    IMPORTING
      OBJECTKEY_CONC = LV_KEY
    TABLES
      OBJECTKEYTABLE = INT_BATCH
      RETURN         = INT_RET1.
IF SY-SUBRC = 0.
   WRITE: 'SUCCESSFUL'.
    CALL FUNCTION 'BAPI_OBJCL_GETDETAIL'
      EXPORTING
        OBJECTKEY              = LV_KEY
        OBJECTTABLE            = 'MCH1'
        CLASSNUM               = 'ZTBATCHCHR'
        CLASSTYPE              = '023'
        KEYDATE                = SY-DATUM
      UNVALUATED_CHARS       = ' '
      LANGUAGE               = SY-LANGU
    IMPORTING
      STATUS                 =
      STANDARDCLASS          =
      TABLES
        ALLOCVALUESNUM         = INT_ALLOCVAL
        ALLOCVALUESCHAR        = INT_ALLOCCHAR
        ALLOCVALUESCURR        = INT_ALLOCCURR
        RETURN                 = INT_RET2
    IF SY-SUBRC = 0.
      WRITE : 'SUCCESSFUL'.
      READ TABLE INT_ALLOCCHAR INTO WA_ALLOCCHAR WITH KEY CHARACT = 'CLARITY'.
      IF SY-SUBRC = 0.
        WA_ALLOCCHAR-VALUE_CHAR = 'C02'.
        WA_ALLOCCHAR-VALUE_NEUTRAL = 'C02'.
        MODIFY INT_ALLOCCHAR FROM WA_ALLOCCHAR INDEX SY-TABIX TRANSPORTING VALUE_CHAR VALUE_NEUTRAL.
      ENDIF.
      CALL FUNCTION 'BAPI_OBJCL_CHANGE'
        EXPORTING
          OBJECTKEY                = LV_KEY
          OBJECTTABLE              = 'MCH1'
          CLASSNUM                 = 'ZTBATCHCHR'
          CLASSTYPE                = '023'
         STATUS                   = '1'
         STANDARDCLASS            =
         CHANGENUMBER             =
         KEYDATE                  = SY-DATUM
         NO_DEFAULT_VALUES        = ' '
       IMPORTING
         CLASSIF_STATUS           =
        TABLES
          ALLOCVALUESNUMNEW        = INT_ALLOCVAL
          ALLOCVALUESCHARNEW       = INT_ALLOCCHAR
          ALLOCVALUESCURRNEW       = INT_ALLOCCURR
          RETURN                   = INT_RET3
      IF SY-SUBRC = 0.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
           WAIT          = 'X'
        IMPORTING
          RETURN        =
        IF SY-SUBRC = 0.
          WRITE: 'SUCCESSFUL'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDIF.

I can not get the correct anser

Hi, Please help me. As the following sch I can not get the correct sqrt value. if changing resistor of R1 I always get 12v direct flow output.
Attachments:
op_divider.zip ‏121 KB

Thanks for your answers. I want the sch to do the operation of square root.
1. in my sch the inverting input is DC -5v, I want to get the square root of 5?
2. In my feedback path I use a multiplier, I Originally thought it is a negative feedback?
3. it Already have ground in the sch, I do not understand that you say "did not ground the scope"?
Thanks again, Could you give me the further pointing. if possible Could you give me a correct sch.
(in fact, I get the sch from a rough sch in a textbook(the rough sch not for multisim). I just give the values for the all components)

GLPCA table not getting updated correctly for VBUND

Hi All,
I have come across one issue that the value of trading partner field (VBUND) in table GLPCA are not getting updated correctly for document type KP.
In vendor master this field has different value versus it is showing in GLPCA-VBUND.
Does any one knows about ?
Thanks for your help on it.
Regards,
Manoj

Hi Sridhar,
Thanks for your response on it.
This note is not applicable for our system as we are working on 4.0B with support pack 52.
Also we are getting this worng update of this field (GLPCA-VBUND) while doing MR11 creating document with doc. type KP. This value is not picking from vendor master (LAF1-VBUND) and randamly picking any value. Not sure from where ?
Please advise your thought.
Thanks,
Manoj

Excel Charts do not get displayed correctly (colour) !urgent!

Hi,
believe me: I spent days in research to fix my problem but could not find a solution yet...
I use a lot of Excel Web Parts on my SharePoint Site. Basically to display charts or tables. Everything worked fine for months but out of a sudden some of the web parts do not anymore. These Web Parts still get displayed but all in black or grey and
because of that are partly unreadable. For example: a cell with a white font and a blue blackground just gets displayed as a black cell with black fontcolour. I thought it might depends on the settings of the server computer but other colourful charts/tables
still work fine (but on the other hand, all new web parts do not get displayed correctly...)
I tried to remove macros, conditional formatting, creating completely new subsites with content. But the result is always the same: black cells.
Then I tried to just use 8bit-colours and tada: it worked (except of the colour white, that still does not work).. I do not have access to the server computer. And I am wondering because some other charts still work..
Any ideas?
I do not use SharePoint Designer, just the browser version of 2010.
Thanks for your help!!!

Here is the code:
IANode QueryContractResultNode = wdContext.nodeA();
IBNode ToolTipNode = wdContext.nodeToolTipNode();
QueryContractResultNode.invalidate();
for(int i=0; i<searchContractListSize; i++)
   IAElement newQueryContractResultEl =   QueryContractResultNode.createAElement();
WDCopyService.copyCorresponding(getList.getOutput().getI_Detail().get(i),newQueryContractResultEl);
IBElement newToolTipEl = ToolTipNode.createBElement();
if(newQueryContractResultEl.getParentName().length() >= 5)
     newToolTipEl.setChildName (newQueryContractResultEl.getParentName().substring(0,4) + "...");
else
     newToolTipEl.setChildName (newQueryContractResultEl.getParentName());
QueryContractResultNode.addElement(newQueryContractResultEl);
ToolTipNode.addElement(newToolTipEl);
Node A is bound to a model structure. Therefore, the value of A.parentName is set after the RFC execution.
Zita

Not getting the correct data at reciever side

Hi
I have done mail adapter... My senario is Mail --> XI --> File... In this mail adapter is sender. i have give the url as pop://<ip address> the xi server is picking up the file...
Source File Is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Mail_Message_Type xmlns:ns0="http://mailtofiledemo.com/ravi">
   <Order>
      <Header>
         <Name>Ravi</Name>
         <Address>Vsp</Address>
      </Header>
      <Item>
         <material>Computer</material>
         <units>3</units>
         <price>90000</price>
      </Item>
   </Order>
</ns0:Mail_Message_Type>
Target File is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:File_Message_Type mlns:ns0="http://mailtofiledemo.com/ravi">
<row>
   <name>Ravi</name>
   <address>Vsp</address>
   <material>Computer</material>
   <units>3</units>
   <price>90000</price>
</row>
I have an unread mail in my Inbox and i have attached the source file to that mail... the server is picking up the file but in receiving side i am not getting the correct target file... i am getting the target file like:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:File_Message_Type xmlns:ns0="http://mailtofiledemo.com/ravi"></ns0:File_Message_Type>
</ns0:File_Message_Type>
eventhough if i dont have any unread mails in my inbox i am getting the same file at target side continuosly...so please give me the solution as early as possbile or else my folder will going to be overflow with that target file
Thanks & Regards
Ravi Shankar

Ravi,
Have to check the Transport Protocol used by internal Mail Server. The parametes you pass to the mail adapter should be same to the internal mail sever where you are trying to send and also check with XIPAYLOAD option.
If this helps to u. Allot the points please.
Thanks
Gowri K

JRockit_160_05_R27.6.2-20 can not get the correct os name for windows 2008

JRockit_160_05_R27.6.2-20 can not get the correct os name for Windows Server 2008 SP1 using System.getProperty("os.name").
System.getProperty("os.name") will return Windows Vista instead of Windows Server 2008 when running on Windows Server 2008 SP1. Is it a bug of this jdk?
I tested it on Sun JDK 1.6. It returns the correct name Windows Server 2008.
Any suggestion will be welcomed. Thanks in advanced!
Edited by: user4516182 on May 13, 2010 12:59 AM

Staffan, thanks for your update.
Do we have a workaround for it or fix it in new release?

Position data not getting ALEd correctly through change pointers

Hi All,
When Posiiton is updated in One system, it gets transfers to another systems through ALE/IDOCs using change pointer method.
when a new holder is assigned to the position in system A, the updated data is not getting tranfered to system B.
All the ALE settings are correct, background jobs are scheduled correctly for the change pointers.
How ever the updated position data is not getting transfered to system B.
The IDOCs are faling with message " Relationship starting from 01O XXXXX impossible - 01S XXXX does not exist/is not active".
Please let me know how to over come this error and tranfer the posoition data when ever it is changed.
Thanks & Regards,
Preethi G

hello Sagar,
u r dynamically generating dropdowns in ur view say VIEW1.U must be generating ur UI dropdowns on click of the button under a trnsparent container with a particular DROP DOWN INDEX ID .
in ur onActionAdd method if u r generating drop downs with ID say DD101, DD102, DD103 and so on ...
thn in ur close button , u need to use the method REMOVE_CHILD_NODE and try to remove the dropdowns with same index .
u cn take reference of this code :
DATA :
    DATA:
            lr_node_info     TYPE REF TO if_wd_context_node_info ,
            lr_node          TYPE REF TO if_wd_context_node,
            dd_indx_id       TYPE string .
CONCATENATE lv_node wd_this->count_sysdel INTO lv_node.
        dd_indx_id = 'DD_1'.
        wd_this->count_sysdel = wd_this->count_sysdel + 1.
        wd_this->count_dd_sys = wd_this->count_dd_sys + 1.
        CONCATENATE dd_indx_id wd_this->count_dd_sys INTO dd_indx_id.
        lr_node = wd_context->get_child_node( name = lv_node ).
        lr_node->invalidate( ).
        CALL METHOD lr_node_info->remove_child_node
          EXPORTING
            name = lv_node.
        lo_drdwn = lo_container->remove_child( id = dd_indx_id ).
here lv_node is the name of ur node , I am using count_sysdel of type NUM and concatenate statement
to provide unique names to the generated node.
u cn declare it under the attributes tab .
u can have dd_indx_id = 'DD_1' and increment count each time using
wd_this->count_dd_sys which is another counter .
do revert back if u need any assitance ,it shud help .
rgds,
amit

BBP_PGRP_ASSIGN_BAdI:Purchase Grp & Purchase Org. are not getting changed

Hi Experts ,
Actual Process:
As per the normal process when Purchase requisiton is created in ECC then it will get reflected to SRM through BBP_EXTREQ_TRANSFER.So while SRM creating that it will assign some deflaut purchase group and organisation .
Requirement given by user:
But user requires the actual purchase org and purchase group to be determined from back end i.e.ECC and reflect the changes in SRM .So we have tried implementing the BADI ->Method:( BBP_PGRP_ASSIGN_BAdI->BBP_SC_PGRP_ASSIGN) using filter option EXTREQ_INB.
Now after implementation when we debug the badi the values are getting updated coorectly in the Change attriutes of Badi .
After the badi execution finished will Org values are not getting modified .So on further anlyses we found that in CT_ITEM(Shopping Cart Item details) the value EB_LOG_SYSTEM is showing as SRMCLIENT300(SRM System ID) but when we manually changed that to EBD220(ECC system ID) the data is getting updated correctly in SRM .
As per my understanding the back end system for SRM is ECC sytem id .But here it is capturing SRM system id.
So I want to know how the standard will capture the logical system as SRM ..instead EBD ..?
Regards
Phani.

Hi Sanjeev,
Backend purchase group is on under Act ECS.
Here the main issue is - Users placed under backend purchase group (org -model) However when we trying to create ECS PO in SRM , noticed that system is picking local purchase group . Hence not replicating to backend system.
I hope BADI should be enabled (BBPPGRPFIND) - could you please through some light on this ,how to proceed with this BADI?
Thanks in advance
Harish

Process order change pointers - not getting logged

Hi,
I have defined change pointers for Process order for one custom message type in BD52 (and BD50 as well.). I have included AFKO, AFPO and AUFK tables (e.g. fields like KEY, GAMNG).
But no change pointers are getting logged when ever I create or change a process order through COR1/2.
Am I missing something?.. (and yes Change pointer are active 'Globally'.)
Thanks.

hi,
generally change pointers (table: BDCP) are saved during change document creation (table CDHDR),
but due to performance reasons this funcionality was switched off...
see oss note 390635...
I think, if you want - you must write own code in which change pointers will be created,
look at these function modules, should be helpful:
ORDER_WRITE_DOCUMENT
CHANGEDOCUMENT_CLOSE
CHANGE_POINTERS_CREATE_LONG
regards, darek

Requisioner is not getting change button in fully approved shopping cart

Hi Experts,
I have problem in getting the change button in fully approved shopping cart which was not created purchase order in the backend due to faulty account assignment.It needs to be changed the account information by the requisitioner .
Requisioner is having LOW in settings of BBP_WFL_SECURITY in personalisation tab.
Thanks in advance.
koushik

Hi CK,
Thanks for the reply but as per our client business requirement, requisitioner should get the change option to correct his shopping cart as the follow on document (purchase order) was not creating due to incorrect acccounting structure in the shopping cart.How should requisitioner get change button in fully approved shopping cart to correct his accounting structure.
Thanks,
Koushik.

Termstore changes are not getting reflected in the list items in SharePoint 2010 farm environment

Hi,
I had created managed metadata with termstores from central admin. Then I had created one list in which added a column of type managed metadata using the managed metadata which I had created. And also added few list items to this list.
The problem is that after updating a termstore the changes are not reflecting in the list items which were added before the update.
I have referred the following links:
http://www.paulgrimley.com/2011/02/managed-metadata-changes-not-applied-to.html
http://davidfrette.wordpress.com/2010/05/26/taxonomy-update-scheduler%C2%A0timer%C2%A0job/
According to the links we need to run Taxonomy Update Scheduler on the server for updated termstore to get reflected. After running
this scheduler on development environment changes are getting reflected but not working on the production environment.
Kindly help!
Regards, Shruti

You should check the obvious. You made the change in dev, but did you make the change in production too? And, is the term you updated, actually the one that you are looking at in the list item?
There is not much, if anything, that can go wrong with that timer job. so I'd guess that the term you are looking at is not the one you think you are updating.
If you have double checked everything (the term is is in fact the same term id), then you may have something erroring in the update process. In this case, you should check the ULS logs for any errors.
Chris
Chris Givens CEO, Architecting Connected Systems
Blog Twitter

FlatFile Schema Change - Message not getting changed correctly.

Similar Messages

Maybe you are looking for