Flatfiles with different structures to one IDoc

Hi,
I did'nt found any valuable information about an N:1 scenario where 2 Flatfiles are to be mapped to one IDoc.So, some elements of the Message1 should be mapped with some segments of the idoc and some elements of the Message2 should be mapped with other segments of the same Idoc.I've seen also the patterns of the SWCV SAP BASIS 7.00.It's clear that I should use forks with correlation for the two messages.But I don't know it would be the Messge Mapping that makes the N:1 Transformation step.Every where i.e blogs,forums the flatfiles have the same structure.
I would be grateful for some precise suggestions
Thanks
George

Hi,
In the message mapping we can do in the below mentioned way.
In the message mapping we have 3 tabs, Design, Test and Messages. By default it is Design, now you select Messages tab, and add the 2 source(flat) files by using the add(+) symbol. now your sender contains 2 flat files and just drag and drop the required idoc at the receiver side and do the mapping as usual.

Similar Messages

Performance between two partitionned tables with different structure

Hi,
I would like if there is a difference between two partitionned tables with different structure in term of performance (access, query, insertions, updates ).
I explain myself in detail :
I have a table that stores one value every 10 minutes in a day (so we have 144 values (24*6) in the whole day), with the corresponding id.
Here is the structure :
| Table T1 |
+ id PK |
+ date PK |
+ sample1 |
+ sample2 |
+ ... |
+ sample144 |
The table is partionned on the column date, with a partionned every months. The primary key is based on the columns (id, date).
There is an additionnal index on the column (id) (is it useful ?).
I would like to know if it is better to have a table with just (id, date, value) , so for one row in the first table we'll have 144 rows in the future? table. The partition will already be on the columns (id, date) with the index associated.
What are the gains or loss in performance with this new structure ( access, DMLs , storage ) ?
I discuss with the Java developers and they say it is simpler to manage in their code.
Oracle version : Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Thanks & Regards
From France
Oliver
Edited by: 998239 on 5 avr. 2013 01:59

I mean storage in tablespaces and datafiles on disk.
Can you justify please and give me concrete arguments why the two structures are equivalent ( except inserting data in T(id, date,value))
because i have to make a report.i didnt say any thing like
two structures are equivalent ( except inserting data in T(id, date,value)i said
About structure : TABLE1(id, date, value) is better than TABLE1(id, date, sample1, .... sample144)because
1) oracle has restriction for numbers of column. Ok you can have 144 columns now but for future if you must have more than 1000 columns , what will you do?
2) Restrictions on Table Compression (Table compression is not supported for tables with more than 255 columns.)
3) store same type values on diffrent columns is bad practise
http://docs.oracle.com/cd/B28359_01/server.111/b28318/schema.htm#i4383
i remember i seen Toms article about this but now i cant find it sorry ((( if i found i will post here

Can I backup two devices (with different documents) to one iCloud account? For example: iPad and iPhone, not everything is synced between the two, but I would like to backup each (seperately in the cloud), is this possible?

Hello Apple Community,
Can I backup two devices (with different documents) to one iCloud account?
For example: iPad Air and iPhone 5, not everything is synced between the two, but I would like to backup each (seperately in the cloud). Is this possible?
This way when I change from an old ipad to a new, I can restore with the ipad backup, and when I change from an old iphone to a new, I can restore from the
iphone backup.
Thank you in advance!

Terminology check here. Do you really mean a "CD"? There's a difference in Cloud behavior between content from a physical CD you ripped (which only has Cloud content if you have iTunes Match) and an "album" you bought from the iTunes Store.
Read references for Home Sharing.
iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
Home Sharing Support page - http://www.apple.com/support/homesharing/
iOS: Setting up Home Sharing on your device - http://support.apple.com/kb/ht4557 - "With Home Sharing in iOS 4.3 or later, you can stream your entire iTunes library over your home Wi-Fi network from your Mac or PC right to your iPhone, iPad, or iPod touch."
The above can get pretty complicated. You are probably best off by syncing both devices to a single library and/or updating the libraries on both computers to have the same content.

Can we clear more line items with different currency within one Vendor

Dear All,
Please guide us the following issue is
Can we clear two line items with different currency within one Vendor (i.e., Down Payment entry passed in EUR and Invoice in JPY).
Thanks in advance.
Regards
Srinivas

Hi
I suppose this should be possible in F-44, for any difference in forex enter a new line item 'Charge off diff.' to Dr/Cr Forex gain/loss account
Thank You,

Pass the internal table with different structures to the class module

Hi ,
I have created a class method to fill up the data in XML format. the method can be called from various programs with internal table with different structures. I want to pass it as dynamic How can I do that.
I tried to declare that as type any.
but not working.
regards,
Madhuri

Hi,
You could work with data reference.
Use GET REFERENCE OF itab INTO data_ref for passing the internal table to your method, and dereference it within the method with ASSIGN statement...
DATA: lr_data TYPE REF TO data.
GET REFERENCE OF itab INTO lr_data.
CALL METHOD meth EXPORTING pr_data = lr_data.
METHOD meth.
FIELD-SYMBOLS <fs> TYPE ANY TABLE
ASSIGN pr_data->* TO <fs>.
ENDMETHOD.
Kr,
Manu.

HT204364 how do I order multiple card or postcard with different images each one in same order?

how do I order multiple card or postcard with different images each one in same order?
I keep paying separate shipping cost for each different photo

That is not an option - with the exeption of photo prints you can only identical items on one order
LN

Two phones with different contacts and one computer?

how do i go about syncing two phones, with different contacts, to one computer?

If you are using Microsoft Outlook and syncing different contacts is your concern, you can set up a new Contacts folder for your iPhone (like "Jeff's Contacts") and set iTunes to sync that folder only to your iPhone. Create a second new Contacts folder for the other iPhone's contacts and do the same thing. Works great for my iPhone and my wife's iPhone, both synced to our home computer.

More contracts (with different suppliers) for one item

Dear MDM Experts,
is it possible to make more contracts (with different suppliers) for one item?
Thanks and regards,
Ádá

Hi,
Thanks for your answer. If I set my shopping cart for a contract with a supplier A, and I select an item with a supplier B, then after pushing button Transport to SRM on the shopping cart webdynpro UI, I would get the an error message, and the item wouldn't come to the SRM.
If the item doesn't have any supplier, and I make a contract with it, the supplier of the contract goes to the item, and after that I can't make a contract with an other supplier for this item, because of the uppers.
The type of field Supplier in table Catalog Items is Lookup field, and it can't be modified.
Could you please write to me which can I set our system to be able to make contracts with many suppliers?
Thanks and regards,
Ádám Horváth

In I-Tunes, how can I consolidate multiple copies of the same album with different tracks into one file in my library screen?

In Windows 7 , I tunes library/ albums, I have many albums ( all the same) with different tracks in each.
Is it possible to consolidate the multiple cover photos into one ?

Generally setting a common Album Artist will fix things, if not see Grouping tracks into albums.
tt2

Comparing Data between two tables with different structure

Hi,
I have 2 tables T1 and T2. Both tables have different structure. I have to check for rows missing in T1 which exist in T2 and vice-versa. I can do that using MINUS operator. But the part where the data exists in both T1 and T2, I have to compare some columns (9 columns the names of this column coming from a meta-data table) if they have same values. If not an exception has to be generated.
Any help is appreciated.
Thanks

Hi,
Whenever you need help on this forum, post:
(1) The version of Oracle (and any other relevant software) you're using
(2) A little sample data (just enough to show what the problem is) from all the relevant tables
(3) The results you want from that data (4) Your best attempt so far
Executable SQL statements (like "CREATE TABLE AS ..." or "INSERT ..." statements) are best for (2).
Formatted tabular output is okay for (3). Type before and after the tabular text, to preserve spacing.
What do you mean by "an exception has to be generated"?
Do you want to raise an error?
Do you want something to appear in the result set?
MINUS finds rows that are in one result set, but not in another.
INTERSECT finds rows that are in both result sets.
Column names have to be hard-coded into the SQL statement. If you want to write something now that will get column names from a metadata table sometime in the future, then you have to use dynamic SQL. SQL*Plus sometimes has quick and dirty ways of doing dynamic SQL, so say whether you're using SQL*Plus or not.

Sending itab with different structure in form-perfomr

Hello,
I have a
perform generate_master tables itab1.
perform generate_master tables itab1.
form generate_master tables itab structure ?.
loop at itab into wa_itab.
lv_werks = wa_itab-werks.
endloop.
endform.
here the structure for wa_ will be different.
Can anyone help me with this.
Alternate solutions are welcome.
Regards
Renu

Hi Renu,
if you want to process tables of different structures in the form, you can
- pass the structure name
FORM generate_master
changing itab type table
using    strucname type tabname.
field-symbols:
<rec1> type strucname1,
<rec2> type strucname2.
case strucname.
    when 'STRUCNAME1'.
    loop at itab assigning <rec1>.
      write: / <rec1>-field1.
    endloop.
    when 'STRUCNAME2'.
    loop at itab assigning <rec2>.
      write: / <rec2>-field2.
    endloop.
endcase.
endform.
- try to find you fields and decide on success for this
FORM generate_master
changing itab type table.
field-symbols:
<rec> type any,
<fld> type any,
loop at itab assigning <rec>.
    assign component 'FIELD1' of structure <rec> to <fld>.
    if sy-subrc = 0.
      write: / <fld>.
    endif.
    assign component 'FIELD2' of structure <rec> to <fld>.
    if sy-subrc = 0.
      write: / <fld>.
    endif,
endloop.
endform.
And then use
PERFORM CHANGING itab[].
Note:
LOOP AT itab ASSIGNING <field-symbol>.
is never slower, in most cases much faster than
LOOP AT itab INTO wa.
And you can never forget the MODIFY statement because you work with the table record directly.
Regards
Clemens

Copy values from model node to another model node with different structure

Hi,
I am getting detils from RFC1 and update some of the data into another RFC2.
the first RFC1 having the strucutre
context
NodeName
nodel
arrtibutes
the second RFC2 having the different strucutre
context
NodeName1
      | nodel2
           | arrtibutes2
           | arrtibutes3
      | nodel5
           | arrtibutes4
           | arrtibutes5
I need to copy the values from first one to second one.
Both are different structures.
Can any one tel me how to do it.
Thanks
Ravi

Hi,
Create 1 custom controllers for each Model.
1.Cust COntroller1:
        Node one.
        ->Attr1(type:String)
        ->Attr2(type:long)
2.Cust COntroller2
        Node one.
        ->Attr1(type:String)
        ->Attr2(type:long)
Through the component controller only u can send the data by mapping.
In component controller:
Node one.
        ->Attr1(type:String)
        ->Attr2(type:long)
Step1:Map the elements from custControler1.
Before mapping make sure that u have data in CustController Context=>value node.
(Note:cust controler node s model node means copy the elements to value node using copyservice)
step2:Go to cust controller2 goto value node and map it.
if ur nt getting,Plz let me knw,
Thanxs,
Lavanya.G

Two ROIs with different purposes in one display

Hi there,
I'm using LV10 and I'd like to know if there's a simple way to create two different ROIs in one image display with different use.
For example:
An avi file is displayed. I create a ROI by drawing on the image display to shrink the regarded area (to save computing resources and time) of the avi. I create a second ROI (also by drawing on the image display) to set a location for a colour analysis.
At the moment, I'm using only one ROI by drawing it on a display and getting its data by using a property node. I reckon this can't work with two ROIs in one display.
My idea is to use a switch and local variables to get what I need, but this seems quite circuitous.
Is there any smarter way?

Hello seasoo,
alternatively you could use "unbundle by name" and then index the contours (for loop or index array). After indexing, use "unbundle by name" again to extract the points of each ROI - top left point, bottom right point.
Best regards,
K
https://decibel.ni.com/content/blogs/kl3m3n
"Kudos: Users may give one another Kudos on the forums for posts that they found particularly helpful or insightful."

How can i map a file with different structures to several deep structures?

Hey experts,
here is my situation. I have to build a file2file scenario. The file has a flat structure without any separators. Depending on the value of the keyfield, i have to determinate, which kind of structure in the current sequence there is. Like i wrote, there isn't any fieldseparator, but for every possible structure (overall 4 types) i know the type by the length of every field in the structure.
My task is:
1. Read the file into PI and transform to XML
2. Map the flat structure depending on the keyvalue to the deep structure
3. Transform several fields in the different structures like the requirement
4. Write back the file via FTP as the same flat structure as before
Do you have any approach to solve the item number 2 (the other steps are clear for me)?
Do i need several mapping-programs? If so, how can i determinate the right mapping-program, deping on the keyvalue?
Thanks in advance
Tobi

Here the inbound payload:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:MT_MULTI_TYPES xmlns:ns="namespace">
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
</ns:MT_MULTI_TYPES>
And here the outbound payload:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_MULTI_TYPES xmlns:ns0="namespace">
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <VORSATZ>
<ZSATA>0</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZLIEF>T</ZLIEF>
<START>20080905</START>
<ZFILL />
<ZENDE>E</ZENDE>
</VORSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <KOPFSATZ>
<ZSATA>1</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>000</BUZEI>
<BUDAT>20080904</BUDAT>
<BLDAT>20080904</BLDAT>
<XBLNR />
<WAERS />
<HWAE2>EUR</HWAE2>
<HWAE3 />
<KURS2>000000000</KURS2>
<KURS3>000000000</KURS3>
<BKTXT />
<ZFILK />
<ZENDE>E</ZENDE>
</KOPFSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>001</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>30611102</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000057576</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>009</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AB</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000021070</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4025V64RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <POSITIONSSATZ>
<ZSATA>4</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<KOART>S</KOART>
<SHKZG>S</SHKZG>
<NEWKO>20519109</NEWKO>
<GSBER>17AA</GSBER>
<ZUBUK />
<VBUND />
<WRBTR>0000000000000</WRBTR>
<ZBTR1>0000000009796</ZBTR1>
<ZBTR2>0000000000000</ZBTR2>
<ZSTEU />
<VALUT>20080904</VALUT>
<KOSTL />
<AUFNR />
<ZUONR>X4027V63RE460XXXXX</ZUONR>
<SGTXT>REX</SGTXT>
<BEWAR />
<ZFPOS />
<ZENDE>E</ZENDE>
</POSITIONSSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
- <NACHSATZ>
<ZSATA>9</ZSATA>
<MANDT>001</MANDT>
<BUKRS>0560</BUKRS>
<BLART>8F</BLART>
<BELNR>1816008128</BELNR>
<BUZEI>010</BUZEI>
<ERDAT>20080905</ERDAT>
<UZEIT>000549</UZEIT>
<ZPROG>PGRR3010</ZPROG>
<ZZSOL>000000000359502</ZZSOL>
<ZZHAB>000000000359502</ZZHAB>
<ZZBEL>0000001</ZZBEL>
<ZZPOS>000000010</ZZPOS>
<ZFILN />
<ZENDE>E</ZENDE>
</NACHSATZ>
</ns0:MT_MULTI_TYPES>

How to securely share Folders with different People inside one Network

Hey there,
I'm working with different people on different projects. All are connected to the same network. Most users have 10.6, some 10.5. I'm providing them with Files. My idea is to setup Folders inside my public folder for each of them to pick their files up. But it is important that only the appropriate person has access to his Folder. Is there a way to set this up easy?

Click on the Folder in question. Go the word File in the top right-hand corner. Click on More Info. Then at the bottom you can set the access for individual users, i.e. read and write access, no access, read access, etc. That way you can limit if people can even get to those folders and who can. Also you want to be sure you hit the little cog symbol when your done managing the permissions and hit "Apply to Enclosed folders" that way everything in that folder is guarenteed to have those permission limitations.

Flatfiles with different structures to one IDoc

Similar Messages

Maybe you are looking for