Flex 2 Runtime: iviews stuck in 'initializing' phase

Hi everybody,
We just patched customer's EP7 VC in order to remove the nasty 32/64k bug with the new Flex 2 runtime.
However what happens now is:
we have several large models developed in SP12/Flex 1.5, they are being correctly deployed to EP SP14/Flex2, but fail to load.
They all hang indefinitely during the initialization phase of the iview, the progress bar stops at about 80%.
Smaller models work ok.
Please help, this issue is endangering my project.
Points will be awarded.
VT

Hi Govindu,
I'm also phasing the phasing same issue here,
It's giving the error like this, Can u suggest me y it's coming..,
and wat's that FLEX2 Complier.., As a developer can i do anything for this....,
Error Details...
Error in compiling Flex application: Error: A function in the code exceeds the 64K byte limit (actual size = '134236'). Since the problem occurs in the compiler-generated deferred instantiation code, please refactor/componentize portions of this document.
(/usr/sap/ED1/JC01/j2ee/cluster/server0/GUIMachine_Business_Packages/yfiin_gain_22077/FLEX_COMPILATION_FOLEDR/AAD2JT2.mxml:19)
Failed to compile AAD2JT2.mxml
It's Urgent requirement... Help me plz
Regards,
Saran

Similar Messages

Stuck on initializing

I have a brand new hp laserjet pro m177fw, and it is "stuck" on initializing phase. I have tried disconnected and restarting, didn't work.
please help!

To add further,
Also try conneting the printer woth a USB and check if the tool below may be abke to communicate and update the printer, it should address such an issue:
•Fixed an issue that could cause the printers control panel to freeze at initialization.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-141652-1&cc=us&dlc=en&lc=en...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Color Laserjet Pro MFP M177fw - stuck on initializing - fresh new printer not working

http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/Pro-MFP-M177fw-stuck-on-initializing/m-p/5097731/highlight/false#M194928 ==QTE==Two days ago I received my printer (same as in this thread) and I am experiencing the exact same problems which are described throughout this thread. The printer is stuck on initializing and makes continuous loud noises. Please let me know how this can be taken care of. I would either need to replace this product, or to have it fixed somehow. Await yours soonest.==UNQTE== ++ Ref to the question from the above thread, I also post it here as a new question just to ensure that I get a response. Thanks beforehand and look forward to hearing from you. BrgdsErik

Hi @SSAB ,
I can send you that information in a private message.
In the forum beside your handle name just click on the envelope to view it.
What happened prior to this issue? (update, paper jam, changed toner)
I would do a hard reset if you haven't tried this method.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Check printing "Format Payment Instructions" stuck at printing phase

Hi,
One of our end users is complaining that he is running a Check Print Request (Format Payment Instructions), which is running since morning, though it completes within 2 minutes.
when i checked the logfile, i found that the request processing was completed successfully and the request is stuck at printing phase:
Request log:
Successfully executed PL/SQL.
Exit: iby.scheduler.FDExtractAndFormatting.unlockInstruction()
Request Completed Normally
Enter: iby.scheduler.FDExtractAndFormatting.queryAcpLtr
Accompanying letter format code: null
End time: Wed Jan 12 10:09:41 GST 2011
Time elapsed: 3459
Time elapsed: 0 min 3 sec 459 ms
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 23800025
Number of copies : 1
Printer : ptfchqprn
Since morning, the request is running and log is showing the same message.
Now, the user is saying that till 2 days back, he was able to print the checks via the same printer.
Here is the log of the same request ran by the same user. This request printed the check successfully.
Successfully executed PL/SQL.
Exit: iby.scheduler.FDExtractAndFormatting.unlockInstruction()
Request Completed Normally
Enter: iby.scheduler.FDExtractAndFormatting.queryAcpLtr
Accompanying letter format code: null
End time: Mon Jan 10 11:37:30 GST 2011
Time elapsed: 2339
Time elapsed: 0 min 2 sec 339 ms
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PRINT   -------------
Printing output file.
Request ID : 23783976
Number of copies : 1
Printer : ptfchqprn
Finished executing request completion options.
I verified that the printer is working fine. I was able to print the sample file from OS and also the Active User Request output.
Also, the same request if printed via other check printers, is going fine and users are able to print the check.
Also, when i checked the OPP log, i did not find any messages for this request that the XML publisher has worked on it to convert it to PDF, the desired format.
Can someone help me with this.
thanks.

What is the application release? OS?
- solaris sparc - 64, R12.1.1, on 2 node RAC 11g
Since morning, the request is running and log is showing the same message.
Have you tried to submit the request again?
- Yes, more than twice.
Now, the user is saying that till 2 days back, he was able to print the checks via the same printer.
What if you submit the request as another user and print to the same printer?
- That I have to check with the Users.
I verified that the printer is working fine. I was able to print the sample file from OS and also the Active User Request output.
Any stuck jobs in the printer queue?
- We restarted the printer too and fired new jobs. All is fine.
Also, the same request if printed via other check printers, is going fine and users are able to print the check.
Since you are able to print the same request to some other printer, and you are able to print to the same printer from the OS/Application, then most probably this is an issue with that specific concurrent request (not concurrent program). Also, please check if you have any locks in the database (bounce the CM/Database if possible and try again).
- CM and Database are brought down at night and then started in the morning every night. So DB and CM have been bounced twice since the issue was reported.
Hussain, how can we check the issue with Conc Request, if any.

FCIP interface stuck at initializing on 9216i v2.1a (vsan segmented)

Following the instructions in both the config guide and troubleshooting guide to configure the FCIP profile and interface, my fcip2 interface status is stuck at initializing. Looking in FM events tab, I can see that the 9216i's are cycling between these states: vsan merged; N_Port unmanageble; vsan segmented and N_Port Up. show fcdom domainlist on the higher priority switch shows it flip-flopping between [local] and principal] [local] states. Using show zoneset active, I can see the zoneset being transfered over to the 2nd switch. Despite all this, the fcip interface does not stay up. Thanks for helping.

Just going from your info, it sounds like the interface comes up for a little bit of time. More than likely then, the issue is MTU. You have an MTU configured larger than somewhere in the network can handle it. If you get the show log output and it shows alot of TCP retransmissions, this is the problem.

SSIS Package stuck at validation phase in active batch and running forever.

Hello Team -
There is a peculiar situation where an SSIS package has been running forever in active batch (cmd). It is stuck at validation phase . However upon restart it executes normally . The scenario occurs intermittently like once in a week or two. There is also
no blocking or locks on the server.
Please give your inputs. Have a nice day.
Happy to help! Thanks. Regards and good Wishes, Deepak. http://deepaksqlmsbusinessintelligence.blogspot.com/

But it does execute on a manual run from the job. I saw several other threads in a similar fashion , and there are solutions but those look inappropriate and temporary and do not deal with active batch ( dtexec) , looking for a standard and a permanant
solution and whether there are any service packs or patches? Its SSIS 2008 and AB8.
Happy to help! Thanks. Regards and good Wishes, Deepak. http://deepaksqlmsbusinessintelligence.blogspot.com/

When i open it gets stuck at "initializing installer" and the green bar doesnt move. How do i fix this so it installs?

Adobe cloud setup downloaded off the internet just fine but when i open it gets stuck at "initializing installer" and the green bar doesnt move. How do i fix this so it installs?

Multiredwolf123 have you utilized the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to resolve the current error?

Content Deployment Job Stuck on Exporting Phase

I have my one site collection and i executed content deployment jon on that site collect and skip one site named current vaccancies which include 4500 Pages , images , etc.
I created another job for that skipped site to deploy content on production. But whenever i run Job my kob stuck on export phase always on this site. What is reason...
Please help me ..

Hi,
You can check event viewer -> Application logs to check event id 4958, 5323, 5325, 5335...then please follow URL
http://technet.microsoft.com/en-us/library/ee924661(v=office.14).aspx
Best practices for content deployment
http://technet.microsoft.com/en-us/library/hh292621(v=office.14).aspx
You can post your error, so we can help you further !!
Regards
Prasad Tandel

Requests stuck in 'Initialized' and 'Received' status

Hello.
I perceiving that in my environment, the Requests, usually "Revoke and Disable" are stucked either "Initialized" or "Received" status. I do not know why.
But, I saw that sometimes in the Resource of the User, the Resouce is Rrovisioning or Waiting.
First question.
If the Resource of the User is different of "enable or provisioned" status, this could interfering on the Request of Disabled or Revoke?
Second question.
How can I solve the problems of the "stuck requests"?
Bye.

Hey Daniel,
Request status itself in OIM is not consistent. For the answer , you need to go through each step and record what your status is to know what the outcome is going to be. So, you should get different status's if you do more than into one task and also have actual approval tasks involved.
I hope this helps,
THiago Leoncio.

MFP M177fw stuck on initializing

My printer stucks on initializing. Tried to cut the power off and start it again. Doesn't work. The toner carousel doesn't rotate either. What should i do?!

Hi , I read your post and see that the new printer is stuck initializing. I will certainly do my best to help you.
Disconnect the USB/Network/FAX and power the printer on Standalone. Check and remove any packaging material inside the printer and toner. Setting Up the Printer Hardware for HP Color LaserJet Pro M177fw MFP Printers. Do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation. If the issue persists, perform a power drain by disconnecting the power cord from the back of the printer and keeping the power button pressed for 30 seconds and in case of a power switch keep the switch in ON position for 30 seconds before reconnecting the power chord. Try and update the printer's firmware. HP Color LaserJet Pro MFP M177fw. Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it. How is the printer connected? (USB/Ethernet/Wireless) If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

32bit Runtime Environment - install after initial oes11 inst

Hi,
I've got an oes11 Server that came "preinstalled". Someone else installed it. During the initial sles11/oes11 install they did not install the "32bit runtime environment" but now I would like to install it. So, yast2 - oes install config and try to add (check the box next to) the 32bit runtime environment. Yast2 accepts it and there is a green check mark next to it. I click accept and it goes straight to the linker / configuration of the oes services. It does not install anything , etc... I tried "installing" it then rebooting the machine, no luck. Everytime I install it and then go back into yast2, it doesn't seem to get installed... Is it not possible to install the 32bit runtime environment after the initial install?
Thanks for your assistance and time.

Btw, when in yast2 and looking at patterns in the software manager, on the left hand side "32bit runtime environment" is unchecked but in the details (right window) several pacakges are shown to be installed but not all.... ?? Is my 32bit runtime environment installed or not? I get the impression the it is not "fully" installed. I got no error messages during the install and have since tried to install it without goind through the "OES Install and configuration" option and instead going directly through the Software Management Option. Same Problem, if it even is a problem?
Once again, thank you for your time and effort.

Pictures sent to my iphone 6 via text messaging are stuck in downloading phase

Pictures that are being sent to me via text messaging are stuck in "downloading" phase. I can not receive any pictures on my new iphone6. Is anyone else experencing this?

Found a great post that had a bunch of possible solutions (over at https://uk.answers.yahoo.com/question/index?qid=20131217195803AAOe6WV )
Lucky for me the first one worked--went into settings->messages and turned iMessage off, waited a few seconds, turned it back on. Images came through just fine after that. We'll see if it lasts.

Satellite A210/A215 recovery stuck on "Initializing the Partition"

Model: Toshiba Satellite A210/A215
Task: System Recovery
Problem: Stuck on "Initializing the Partition"
A few months ago, my Satellite A210/A215 suddenly wouldn't start Windows, and after a few tries of restarting, said that there was no operating system. I'm currently in the process of trying to perform a full system recovery; however, the recovery seems to have stopped on "Initializing the Partition." Now, as the recovery process had been moving quite slow before anyway, I allowed the computer to sit over night. This morning, the computer is still on "Initializing the Partition". Any suggestions would be great!

Are you using the recovery partition or recovery discs?
For now, I'd suggest giving up on that trial and trying again. You might as well give it a few tries even if the second one doesn't take! If you try a few times and it still won't go, it sounds like the hard drive itself might be bad.
- Peter

Application Server Administration Service Timer Job stuck at Initialized 0% . Config Cache clear doesnt Help.MOSS2007

Hi All,
One of my WFE/Query server for MOSS is showing Application Server Administration Service Timer Job stuck at Initialized 0% in CA timer Job status.
In timer Job Status in CA under the SSP Job Control service I find the Application Server Administration Service Timer Job struck at 0%
I have tried Clearing config cache of the Farm . I have tried disconnecting this server from Farm and reconnecting it with Psconfig UI, I have tried running Psconfig.exe on the affected server. But even after doing this service is stuck at 0%
If I exit the OWSTimer.exe from task manager, it shows aborted at 0% . I am using a single SSP and reconfiguring SSP is not an option right now.
Any help regarding it will be greatly appreciated.
Regards,
Rohit

Hello,
Have you changed the password recently? Also try to restart the windows timer service on all server.
You might also want to check these threads:
http://sharepoint.stackexchange.com/questions/44073/why-timer-job-stucks-at-initialized-status
http://social.msdn.microsoft.com/Forums/en-US/d238cc1c-5c41-4762-9878-020cb36679c3/wss-30-workflow-timer-job-status-stuck-at-initialized-0
http://social.technet.microsoft.com/Forums/sharepoint/en-US/7d932581-91a9-41f2-8848-95f8a72ba19b/timer-job-initialized-0?forum=sharepointadminlegacy
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

After effects cs6 gets stuck on initializing mediacore after is been used.please help

Everytime I use after effects cs6 and then want to open it again it gets stuck on initializing mediacore. I then have to restart windows or my computer to make it work again. Please hel. Thanks

We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

Flex 2 Runtime: iviews stuck in 'initializing' phase

Similar Messages

Maybe you are looking for