Flex Config File DTDs or Schemas

I am writing a basic application to test Flex integration
with Java objects, and after solving a bunch of deployment errors,
I am happy to say I am finding no errors on deployment anymore. The
application, however, still doesn't work because of what must be
some undescribed configuration error.
I have been unable to find any DTDs or schemas that pertain
to any of the following files:
flex-config.xml
data-management-config.xml
flex-webtier-config.xml
remoting-config.xml
services-config.xml
mxml-manifest.xml
Putting aside my disappointment that I need all these files
for a Flex-Java application that couldn't get any simpler, I would
appreciate any insight into these files.
Thanks.

Ok, I solved it by myself
I need to add the following codes when calling the Compiler
API
Configuration conf = application.getDefaultConfiguration();
conf.setToken("flexlib", "path to the frameworks")
applicaiton.setConfiguration(conf);
Then it solved the problem

Similar Messages

How to start a cache config file with proxy-scheme

Hi all,
The below is my cache-config file taken from coherence extend example.
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>dist-default</scheme-name>
</cache-mapping>
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>example-remote</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<distributed-scheme>
<scheme-name>dist-default</scheme-name>
<lease-granularity>member</lease-granularity>
<backing-map-scheme>
<local-scheme/>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<distributed-scheme>
<scheme-name>example-remote</scheme-name>
<lease-granularity>member</lease-granularity>
<backing-map-scheme>
<local-scheme/>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
<proxy-scheme>
<service-name>ExtendTcpProxyService</service-name>
<thread-count>5</thread-count>
<acceptor-config>
<tcp-acceptor>
<local-address>
<address>localhost</address>
<port>9009</port>
</local-address>
</tcp-acceptor>
</acceptor-config>
<autostart>true</autostart>
</proxy-scheme>
</caching-schemes>
</cache-config>
In order to start the proxy cache server on localhost:9009 should i use the DefaultCacheServer program only/ I tried to use a SimpleCacheExplore program with the above config and it didnt start the proxy-scheme on localhost. is there anything i am missing?
Regards
S

Hello,
I ran the following with your cache configuration:
java -cp coherence.jar -Dtangosol.coherence.cacheconfig=coherence-cache-config.xml com.tangosol.net.DefaultCacheServer...and got the following output:
2010-01-04 10:23:54.363/5.477 Oracle Coherence GE 3.5.2/463p2 <Info> (thread=Proxy:ExtendTcpProxyService:TcpAcceptor, member=1): TcpAcceptor now listening for connections on 10.149.189.62:9009
Services
TcpRing{TcpSocketAccepter{State=STATE_OPEN, ServerSocket=10.149.189.62:8088}, Connections=[]}
ClusterService{Name=Cluster, State=(SERVICE_STARTED, STATE_JOINED), Id=0, Version=3.5, OldestMemberId=1}
InvocationService{Name=Management, State=(SERVICE_STARTED), Id=1, Version=3.1, OldestMemberId=1}
DistributedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
ProxyService{Name=ExtendTcpProxyService, State=(SERVICE_STARTED), Id=3, Version=3.2, OldestMemberId=1}
)The proxy service appears to be running using DefaultCacheServer and this configuration. Does your output look any different?
Thanks,
Patrick

Source path Flex config files not updated in generated output

I have a project, built using Flash Builder 4.0 on Mac OS X 10.6.
One of my source directories is src/main/webapp which contains a WEB-INF directory with this structure:
webapp
          - WEB-INF (applicationContext.xml etc)
                    - - classes
                    - - flex (services-config.xml, remoting-config.xml, proxy-config.xml, messaging-config.xml)
                    - - lib
In properties, under Flex Build Path I have set src/main/webapp as an additional source folder.
When the project compiles, all the artifacts are created, and all of the above, including *.xml files under
WEB-INF are copied to the output folder, except for the WEB-INF flex directory which has the four xml
configuration files.
The same happens when I create a bin-release folder using the Project/Export Release Build menu.
Any ideas why just the WEB-INF/flex directory is not being copied to bin-debug or bin-release?
Thanks.

I don't know a whole lot about beehive pageflow and I haven't done this myself, but I do believe you have run apt to have it generate the various other files pageflow and controls needs. I found some information in the pageflow docs:
http://beehive.apache.org/docs/1.0.2/netui/projects.html#building
http://beehive.apache.org/docs/1.0.2/infra/beehive-ant-macros.html
Greg

Can i reference external flex-config in flexunit ant task?

flexunit gurus,
i'm trying to figure out how to best specify the compiler arguments for the flexunit ant task in flexunit 4.1 beta 1. from the documentation i see this sample flexunit usage:
<flexunit workingDir="${bin.loc}" toDir="${report.loc}"
haltonfailure="false" verbose="true" localTrusted="true">
<testSource dir="${main.src.loc}" />
<testSource dir="${test.src.loc}">
<include name="**/*Test.as" />
</testSource>
<library dir="${lib.loc}" />
</flexunit>
in this example, the source and library paths are explicitly listed. in this simple example all the needed libraries reside within a single directory.
when i build my application, i use a custom flex-config.xml file, as the following snippet shows:
        <mxmlc file="${application.file}" output="${swf.debug.file}" debug="true" headless-server="${headless.server}">
            <load-config filename="${flex.config.file}" />
        </mxmlc>
in that custom flex-config.xml file i list all the build options (e.g. source dirs, library paths, theme, etc.) appropriate for building the application. the libraries i reference are in a number of different directories (in general each 3rd party library is in a different directory).
in the flexunit task, i could individually reference all the same libraries that are in the flex-config.xml, but that'd be a pain to keep them in sync. i suppose i also could parse the flex-config.xml to extract the library information and use that to populate the library argument. really what i want to say in the flexunit task is "build all source and tests as indicated in flex-config.xml, then run the tests", perhaps with a syntax like the following:
<flexunit workingDir="${bin.loc}" toDir="${report.loc}"
haltonfailure="false" verbose="true" localTrusted="true">
            <load-config filename="${flex.config.file}" />
<testSource dir="${test.src.loc}">
<include name="**/*Test.as" />
</testSource>
<library dir="${flexunit.lib}" />
</flexunit>
i'd rather keep the flex-config.xml file free of any test specific information, so ideally i'd specify the path to the flexunit swc's and the test path in the flexunit task (as in the above example).
is there support for such usage currently or planned for in the future? recommendations on how best to accomplish my goal of not duplicating library information already present in a custom flex-config.xml?
thanks.
-mike

hi brian,
thanks for your response.
i understand the desire to avoid re-implementing the flex sdk ant tasks. i'm not sure that can reasonably be accomplished wihen the TestRunner is dynamically generated from within the flexunit task. in addition to the source path and library path, the theme setting and namespaces settings can affect successful compilation, and the runtime-shared-library-path setting can affect whether the produced swf runs correctly.
perhaps there's an alternative. what if we separate the creation of the TestRunner.mxml from the compilation and the execution of the tests. if flexunit offers an ant task that can produce (but not run) a TestRunner.mxml, i can write the mxmlc task that compiles it properly, and then i can invoke the old style flexunit specifying the swf argument. this would still accomplish my primary goal of not needing to manually enumerate every test file in a TestRunner.mxml that i have to maintain (and which neither Flash Builder nor maven builds require). to compile the TestRunner.mxml, i'd load in my custom flex-config.xml, then append to the source path and library path to include my test directory and flexunit libraries.
maybe something like the following to create the TestRunner:
<generatetestrunner output="${bin.loc}/TestRunner.mxml">
          <testSource dir="${test.dir}">
             <include name="**/*Test.as" />
          </testSource>
</generatetestrunner>
thoughts?
one other thing i noticed about the current library argument to flexunit is that it assumes a directory even if you provide an explicit path to an swc (i tried switching <library dir...> to <library file...> but that didn't seem to make a difference). in my case, there are specific swc's i need in the library path, and the task assuming i mean a directory when i specify an explicit swc is problematic. the directory my swc libraries are contained in sometimes contain multiple and conflicting versions of a library (each library directory contains various snapshot builds of the library). i need a way to explicitly indicate which library to use.
finally, could you point me to the java source for the flexunit ant tasks? i've found the flexunit action script source ok but haven't found where the java ant task is defined.
thanks.
-mike

DTD for BlazeDS/LCDS config files

Is there any DTD available for BlazeDS/LCDS config files?
Thanks

Thanks a bunch, that was it. Any ideas where I can find DTSs
or Schemas for the FDS config files?
-Robert

[svn] 3037: Update flex-config. xml files used by the team and qa webapps to use the {targetPlayerMajorVersion} token instead of a hardcoded player version in the library-path and external-library-path .

Revision: 3037
Author: [email protected]
Date: 2008-08-29 06:54:15 -0700 (Fri, 29 Aug 2008)
Log Message:
Update flex-config.xml files used by the team and qa webapps to use the {targetPlayerMajorVersion} token instead of a hardcoded player version in the library-path and external-library-path. This will allow the correct playerglobal.swc to be located when the target player version is set in the flex-config.xml or passed to mxmlc or compc.
Modified Paths:
blazeds/trunk/apps/team/WEB-INF/flex/flex-config.xml
blazeds/trunk/qa/resources/config/flex-config.xml

Unfortunately I don't have the
"org.eclipse.swt.win32.win32.x86_3.1.2.jar" file. On my computer
the folder is not set up the same way (C:\Program Files\Adobe\Flex
Builder 2\plugins) instead it is set up as (C:\Program
Files\Adobe\Flex Builder 2\metadata\plugins) but I've looked in
everything and that file just isn't in there. I've re downloaded it
twice. Still not there. Is there anything else i can do.

[svn] 3025: Add libs/player/ 10 directory to the library path in the team apps flex-config.xml file.

Revision: 3025
Author: [email protected]
Date: 2008-08-28 11:24:42 -0700 (Thu, 28 Aug 2008)
Log Message:
Add libs/player/10 directory to the library path in the team apps flex-config.xml file. This is to matche what's in the flex-config.xml file that comes with the Flex SDK.
Add libs/player directory to the library path of the flex-config.xml file that is shared by the qa-manaul and qa-regress webapps. This is to match what's in the flex-config.xml file that comes with the sdk.
Change the call to mxmlc in the compile-swf target in the flexunit build script to set the target player version to 10.0.0.
Remove web services and http service tests that were removed by Bill from qa feature.properties files otherwise the automated test frameworks will try to run these tests and blow up.
Modified Paths:
blazeds/trunk/apps/team/WEB-INF/flex/flex-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/flexunit/build.xml
blazeds/trunk/qa/features/full.properties
blazeds/trunk/qa/features/httpService.properties
blazeds/trunk/qa/resources/config/flex-config.xml
Removed Paths:
blazeds/trunk/qa/features/nist.properties
blazeds/trunk/qa/features/webService.properties

Revision: 3025
Author: [email protected]
Date: 2008-08-28 11:24:42 -0700 (Thu, 28 Aug 2008)
Log Message:
Add libs/player/10 directory to the library path in the team apps flex-config.xml file. This is to matche what's in the flex-config.xml file that comes with the Flex SDK.
Add libs/player directory to the library path of the flex-config.xml file that is shared by the qa-manaul and qa-regress webapps. This is to match what's in the flex-config.xml file that comes with the sdk.
Change the call to mxmlc in the compile-swf target in the flexunit build script to set the target player version to 10.0.0.
Remove web services and http service tests that were removed by Bill from qa feature.properties files otherwise the automated test frameworks will try to run these tests and blow up.
Modified Paths:
blazeds/trunk/apps/team/WEB-INF/flex/flex-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/flexunit/build.xml
blazeds/trunk/qa/features/full.properties
blazeds/trunk/qa/features/httpService.properties
blazeds/trunk/qa/resources/config/flex-config.xml
Removed Paths:
blazeds/trunk/qa/features/nist.properties
blazeds/trunk/qa/features/webService.properties

[svn:osmf:] 17162: config file and relevant changes for flex sdk3 to flex sdk 4 migration

Revision: 17162
Revision: 17162
Author:   [email protected]
Date:     2010-08-02 18:31:23 -0700 (Mon, 02 Aug 2010)
Log Message:
config file and relevant changes for flex sdk3 to flex sdk 4 migration
Modified Paths:
    osmf/trunk/apps/certification/zeri/FlexUnit4UIListener/src/org/flexunit/flexui/data/TestR unnerBasePresentationModel.as
    osmf/trunk/apps/samples/framework/DynamicStreamingSample/DynamicStreamingSample-build-con fig.xml
    osmf/trunk/apps/samples/framework/ExamplePlayer/ExamplePlayer-build-config.xml
    osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/view/MainWindowLayout.mxml
    osmf/trunk/apps/samples/framework/MediaContainerSample/MediaContainerSample-build-config. xml
    osmf/trunk/apps/samples/framework/MediaContainerUIComponent/MediaContainerUIComponent-bui ld-config.xml
    osmf/trunk/apps/samples/framework/NestedMediaContainersSample/NestedMediaCOntainersSample -build-config.xml
    osmf/trunk/apps/samples/framework/OSMFPlayer/OSMFPlayer-build-config.xml
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml
    osmf/trunk/framework/OSMF/osmf-build-config.flex
    osmf/trunk/framework/OSMF/osmf-build-config.xml
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/osmfintegrationtest-build-config.xml
    osmf/trunk/framework/OSMFTest/OSMFTest.mxml
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flex
    osmf/trunk/framework/OSMFTest/osmftest-build-config.xml
    osmf/trunk/libs/samples/ChromeLibrary/ChromeLibrary-build-config.xml
    osmf/trunk/libs/samples/Syndication/syndication-build-config.flex
    osmf/trunk/libs/samples/Syndication/syndication-build-config.xml
    osmf/trunk/libs/samples/VAST/vast-build-config.flex
    osmf/trunk/libs/samples/VAST/vast-build-config.xml
    osmf/trunk/libs/testing/NetMocker/netmocker-build-config.xml
    osmf/trunk/libs/testing/StrobeUnit/strobeunit-build-config.xml
    osmf/trunk/plugins/samples/SMILPlugin/SMILPlugin-build-config.xml
Added Paths:
    osmf/trunk/apps/certification/zeri/FlexUnit4/flexunit4-build-config-10-1.xml
    osmf/trunk/apps/certification/zeri/FlexUnit4UIListener/flexunit4uilistener-build-config-1 0-1.xml
    osmf/trunk/apps/certification/zeri/ZeriCertificationPlayer/zericertificationplayer-build- config-10-1.xml
    osmf/trunk/apps/certification/zeri/ZeriCertificationTest/zericertificationtest-build-conf ig-10-1.xml
    osmf/trunk/apps/certification/zeri/ZeriCertificationUtils/zeri-certification-utils-build- config-10-1.xml
    osmf/trunk/apps/samples/framework/MediaContainerUIComponent/MediaContainerUIComponent-bui ld-config-10-1.xml
    osmf/trunk/framework/OSMF/osmf-build-config-10-1.xml

Revision: 17162
Revision: 17162
Author:   [email protected]
Date:     2010-08-02 18:31:23 -0700 (Mon, 02 Aug 2010)
Log Message:
config file and relevant changes for flex sdk3 to flex sdk 4 migration
Modified Paths:
    osmf/trunk/apps/certification/zeri/FlexUnit4UIListener/src/org/flexunit/flexui/data/TestR unnerBasePresentationModel.as
    osmf/trunk/apps/samples/framework/DynamicStreamingSample/DynamicStreamingSample-build-con fig.xml
    osmf/trunk/apps/samples/framework/ExamplePlayer/ExamplePlayer-build-config.xml
    osmf/trunk/apps/samples/framework/ExamplePlayer/org/osmf/view/MainWindowLayout.mxml
    osmf/trunk/apps/samples/framework/MediaContainerSample/MediaContainerSample-build-config. xml
    osmf/trunk/apps/samples/framework/MediaContainerUIComponent/MediaContainerUIComponent-bui ld-config.xml
    osmf/trunk/apps/samples/framework/NestedMediaContainersSample/NestedMediaCOntainersSample -build-config.xml
    osmf/trunk/apps/samples/framework/OSMFPlayer/OSMFPlayer-build-config.xml
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml
    osmf/trunk/framework/OSMF/osmf-build-config.flex
    osmf/trunk/framework/OSMF/osmf-build-config.xml
    osmf/trunk/framework/OSMFAIRTest/OSMFAIRTest-build-config.xml
    osmf/trunk/framework/OSMFIntegrationTest/osmfintegrationtest-build-config.xml
    osmf/trunk/framework/OSMFTest/OSMFTest.mxml
    osmf/trunk/framework/OSMFTest/osmftest-build-config.flex
    osmf/trunk/framework/OSMFTest/osmftest-build-config.xml
    osmf/trunk/libs/samples/ChromeLibrary/ChromeLibrary-build-config.xml
    osmf/trunk/libs/samples/Syndication/syndication-build-config.flex
    osmf/trunk/libs/samples/Syndication/syndication-build-config.xml
    osmf/trunk/libs/samples/VAST/vast-build-config.flex
    osmf/trunk/libs/samples/VAST/vast-build-config.xml
    osmf/trunk/libs/testing/NetMocker/netmocker-build-config.xml
    osmf/trunk/libs/testing/StrobeUnit/strobeunit-build-config.xml
    osmf/trunk/plugins/samples/SMILPlugin/SMILPlugin-build-config.xml
Added Paths:
    osmf/trunk/apps/certification/zeri/FlexUnit4/flexunit4-build-config-10-1.xml
    osmf/trunk/apps/certification/zeri/FlexUnit4UIListener/flexunit4uilistener-build-config-1 0-1.xml
    osmf/trunk/apps/certification/zeri/ZeriCertificationPlayer/zericertificationplayer-build- config-10-1.xml
    osmf/trunk/apps/certification/zeri/ZeriCertificationTest/zericertificationtest-build-conf ig-10-1.xml
    osmf/trunk/apps/certification/zeri/ZeriCertificationUtils/zeri-certification-utils-build- config-10-1.xml
    osmf/trunk/apps/samples/framework/MediaContainerUIComponent/MediaContainerUIComponent-bui ld-config-10-1.xml
    osmf/trunk/framework/OSMF/osmf-build-config-10-1.xml

SSL Flex Remote Object - no remoting-config file

I realize that this topic has been discussed a lot, and I think
I have the solution figured out.
The problem is that I have to edit the remoting-config file - and there isn't one!
I've hunted high and low on the server, and I just don't have the file.
We are using Coldfusion 8,0,0,176276 Enterprise, and I have an instance for my flex applicaitons (we have multiple instances running, and none of them have the file). The server is running on a Solaris VM.
How do I fix this problem??
Thanks!
Jenn

My context root is specified as the default "/" When I remove the context root variable from the services-config.xml, it can't find the file. I don't know where I can change context root, but I am confused as to what it should be, regardless.
Add the -context-root to the compiler options, just like -services and set it to an empty string
-services="/Applications/JRun4/servers/cfusion/cfusion-ear/cfusion-war/WEB-INF/f lex/servics-config.xml" -context-root=""

Does class-scheme in the coherence config file works for C++ classes?

Hello,
Does anyone knows if the class-scheme in the coherence config file works for C++ classes as well? In other words if I have a C++ implementation of com.DBCacheStore will it work?
<class-scheme>
<class-name>com.DBCacheStore</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>AAA</param-value>
</init-param>
</init-params>
</class-scheme>
Thanks,
Jay

931907 wrote:
Hello Robert,
I am refering here to both C++ client and Coherence Server. Will it work in either of the cases?
Thanks,
JayHi Jay,
Coherence server: it definitely won't do anything with C++.
C++ client: for the cache store of a local cache residing within the C++ client you may be able to specify it, but it will have nothing to do with the cluster itself. I never worked with the C++ client, so I can't guarantee you can configure it that way. Look at the following page for further documentation:
http://docs.oracle.com/cd/E24290_01/coh.371/e22839/cpp_config.htm
Best regards,
Robert

Running faces config file without using internet

hi
i m new to JSF
how i can run faces config file without using live internet
i have put "web-facesconfig_1_1.dtd" file at local path
while i run the jboss,it will throw exception of fileNotFoundException

Which version of JBoss are you using? I have successfully run 4.2.x off the grid but I typically use schema:<faces-config xmlns="http://java.sun.com/xml/ns/javaee"
              xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
              xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd"
              version="1.2">Note that I did not need to obtain copies of the files myself for use locally.

Can some one cross check this config file..

can some one cross check the below config file..specially the 2mb memory allocation for front(local) cache..should i specify the <unit-calculator>BINARY</unit-calculator> since i allocated 2mb for local cache..
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>dist-statedaemon</cache-name>
<scheme-name>nearcache</scheme-name>
<init-params>
<init-param>
<param-name>front-size-limit</param-name>

<param-value system-property="front.size.limit">2097152</param-value>
</init-param>
</init-params>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<local-scheme>
<scheme-name>localcache</scheme-name>
<eviction-policy>LRU</eviction-policy>
<high-units>{front-size-limit 0}</high-units>
</local-scheme>
<near-scheme>
<scheme-name>nearcache</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>localcache</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<distributed-scheme>
<scheme-ref>dist-default</scheme-ref>
</distributed-scheme>
</back-scheme>
<invalidation-strategy>present</invalidation-strategy>
</near-scheme>
<distributed-scheme>
<scheme-name>dist-default</scheme-name>
<service-name>DistributedCache</service-name>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
</serializer>
<local-storage>false</local-storage>
</distributed-scheme>
</caching-schemes>
</cache-config>

Hi
I'm not exactly clear on what you are attemting to do. However you first need to have at least one storage enabled configuration and then you need to have a backing map.
So your configuration should look somthing like this:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>dist-statedaemon</cache-name>
<scheme-name>nearcache</scheme-name>
<init-params>
<init-param>
<param-name>front-size-limit</param-name>

<param-value system-property="front.size.limit">2097152</param-value>
</init-param>
</init-params>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<local-scheme>
<scheme-name>localcache</scheme-name>
<eviction-policy>LRU</eviction-policy>
<high-units>{front-size-limit 0}</high-units>
</local-scheme>
<near-scheme>
<scheme-name>nearcache</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>localcache</scheme-ref>
</local-scheme>
</front-scheme>
<back-scheme>
<distributed-scheme>
<scheme-ref>dist-default</scheme-ref>
</distributed-scheme>
</back-scheme>
<invalidation-strategy>present</invalidation-strategy>
</near-scheme>
<distributed-scheme>
<scheme-name>dist-default</scheme-name>
<service-name>DistributedCache</service-name>
<serializer>
<class-name>com.tangosol.io.pof.ConfigurablePofContext</class-name>
</serializer>
*<backing-map-scheme>*
*<local-scheme>*
*<scheme-ref>localcache</scheme-ref>*
*</local-scheme>*
*</backing-map-scheme>*
<local-storage> true </local-storage>
</distributed-scheme>
</caching-schemes>
Thanks
/Charlie

Changing the Crystal Report dependency from 10.2 to 11.5 using config file

Hi,
We have an windows application in .net 2.0, which refers to Crystal Report 10.2 version. Now the dependency was being upgraded to 11.5. But we do not have the exact source code for the executable to change the dependency from 10.2 to 11.5.
I have installed the CR 11.5 to the testing machine and tried to open the appilcation. it failed saying CR 10.2 dlls were missing
Then I changed the .net config files to change the dependency assembly as follows
<runtime>
     <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.CrystalReports.Engine" publicKeyToken="692fbea5521e1304" culture="neutral" />
         <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.ReportSource" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.Shared" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
       <dependentAssembly>
         <assemblyIdentity name="CrystalDecisions.Windows.Forms" publicKeyToken="692fbea5521e1304" culture="neutral" />
      <bindingRedirect oldVersion="10.2.3600.0" newVersion="11.5.3700.0"/>
       </dependentAssembly>
      </assemblyBinding>
</runtime>
Now the application launched with out any issues. I thought the problem was sorted out.
But when I tried to generate the report, there comes the problem
During the report generation, I am getting the following error
Crystal Reports
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
OK
I do not want to install the 10.2 redistributable in teh machine also do not want to re-compile the sources changing the dependency
Is there any way to achieve this ?
Any help is much appreciated.
Thanks
Edited by: Balaji Narasimhan on Aug 3, 2009 5:28 PM

No way that I know of. I believe once you change the dependency, you will have to recompile the project. Installing CR 10.2, may get this to work, but the app will most likely use the 10.2 references. Let's see if anyone else has any ideas.
Ludek

Search for a specific string in web.config file

Hi
Is there a way we can search a specific word in web.config using powershell.
I have an entry of "user name" in the connection string. I want to find what the user name is and whether its a correct user name or not based on the criteria set in the script.
i believe its a simple matter of if statement but due to connection string i am unable to do this.
this is my connection string from web.config
<connectionStrings>
<add name="Membership" connectionString="Data Source=testdb;Initial Catalog=test;user
name=testUser;password=123456;MultipleActiveResultSets=true"
providerName="System.Data.SqlClient"/>
</connectionStrings>
My criteria is. if user name -eq testUser write-host "correct user name" else "user name is incorrect"
This is the script which i am using
$webConfig = 'C:\Users\test\web.config'
$cfg = [xml](gc $webConfig)
Not sure how the if statement will work in searching the document and applying critera

Here is the full web.config file. i just modified the credentials.
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection,
EntityFramework, Version=5.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
<section name="nlog" type="NLog.Config.ConfigSectionHandler, NLog" />
<sectionGroup name="common">
<section name="logging" type="Common.Logging.ConfigurationSectionHandler,
Common.Logging" />
</sectionGroup>

</configSections>
<connectionStrings>
<add name="Membership" connectionString="Data Source=TestDB;Initial Catalog=Test;user
id=TestUser;password=1234556;MultipleActiveResultSets=true" providerName="System.Data.SqlClient" />
<add name="Administrator" connectionString="Data Source=TestDB;Initial Catalog=Test;user
id=TestUser;password=1234556;MultipleActiveResultSets=true" providerName="System.Data.SqlClient" />
</connectionStrings>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5.1" />
</startup>
<entityFramework>
<defaultConnectionFactory type="System.Data.Entity.Infrastructure.SqlConnectionFactory,
EntityFramework" />
</entityFramework>
<nlog xmlns="http://www.nlog-project.org/schemas/NLog.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
throwExceptions="true">
<targets>
<target name="f1" xsi:type="File" fileName="test.log.txt"
layout="${threadname} ${longdate}
${callsite} ${logger}[${level}] ${message}" />
<target name="console" xsi:type="Console" layout="${threadname}
${longdate} ${callsite}
${logger}[${level}] ${message}" />
</targets>
<rules>

<logger name="*" writeTo="f1" minlevel="Info" />
<logger name="*" writeTo="console" minlevel="Debug"
/>
</rules>
</nlog>
<common>
<logging>
<factoryAdapter type="Common.Logging.NLog.NLogLoggerFactoryAdapter, Common.Logging.NLog20">
<arg key="configType" value="INLINE" />
</factoryAdapter>
</logging>
</common>
<appSettings>
<add key="V3Import.Import.TestMode" value="true" />
<add key="MSMQ.QueueName" value="TestQueue" />
<add key="MSMQ.ErrorQueueName" value="TestQueue" />
<add key="AdminSignaturePath" value="C:\user\test\myfolder" />
<add key="SyncQueueJobCRON" value="0 0/2 * 1/1 * ? *" />
</appSettings>
<system.web>
<authentication mode="Forms">
<forms loginUrl="~/Account/Login" timeout="5000000" />
</authentication>
<membership defaultProvider="AspNetMembershipProvider">
<providers>
<add connectionStringName="Membership" enablePasswordRetrieval="false"
enablePasswordReset="false" requiresQuestionAndAnswer="false" applicationName="/Test" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6"
minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" passwordStrengthRegularExpression="" name="AspNetMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0,
Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers>
</membership>
<profile>
<providers>
<add name="AspNetProfileProvider" connectionStringName="Membership"
applicationName="/Test" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers>
</profile>
<roleManager>
<providers>
<add name="AspNetRoleProvider" connectionStringName="Membership"
applicationName="/Test" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers>
</roleManager>
</system.web>
<system.net>
</system.net>
<runtime>
<assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
<dependentAssembly>
<assemblyIdentity name="dotless.Core" publicKeyToken="96b446c9e63eae34"
culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-1.3.1.0" newVersion="1.3.1.0"
/>
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35"
culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-5.1.0.0" newVersion="5.1.0.0"
/>
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="System.Web.WebPages" publicKeyToken="31bf3856ad364e35"
culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-3.0.0.0" newVersion="3.0.0.0"
/>
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="EntityFramework" publicKeyToken="b77a5c561934e089"
culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-5.0.0.0" newVersion="5.0.0.0"
/>
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="NLog" publicKeyToken="5120e14c03d0593c"
culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-2.1.0.0" newVersion="2.1.0.0"
/>
</dependentAssembly>
<dependentAssembly>
<assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed"
culture="neutral" />
<bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0"
/>
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>

Could not find a part of the path 'C:\Program Files\Update Services\Schema\

clean SC 2012 R2 RTM.
1. had problems with WSUS installation/post configuration
2. found a blog with an identical problem where the problem was solved with the call to Microsoft. Tools directory was missing.
I followed the suggestion: reinstalled WSUS using ps and wsusutil.
I canceled WSUS configuration at recommended step. Everything looked fine.
But after SUP creation I found SMS_WSUS_CONFIGURATION_MANAGER warning.
I checked WCM.log and found Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.
When checked there was no Schema folder in the path above. So it's just missing as folder TOOLS before troubleshooting.
Any suggestions for fixing this.
Thanks.
Here is partial WCM that could help to find the issue, I clearly see that there is no Schema directory in C:\Program Files\Update Services:
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:00 PM 4536 (0x11B8)
Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:14 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:20 PM 4536 (0x11B8)
Successfully inserted WSUS Enterprise Update Source object {91F81925-CC1D-40C0-98C3-902AD3717594} SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:09:21 PM 4536 (0x11B8)
Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:21 PM 4536 (0x11B8)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~
at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1716 TID=4536 GMTDATE=Sat Dec 07 22:10:22.831 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:10:22 PM 4536 (0x11B8)
Shutting down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
Shutting Down... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:51:31 PM 4536 (0x11B8)
SMS_EXECUTIVE started SMS_WSUS_CONFIGURATION_MANAGER as thread ID 4168 (0x1048). SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:38 PM 2008 (0x07D8)
This confman.contoso.lan system is the SMS Site Server. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Setting new configuration state to 1 (WSUS_CONFIG_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Changes in active SUP list detected. New active SUP List is: SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
    SUP0: confman.contoso.lan, group = CONFMAN, nlb = SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Updating active SUP groups... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Waiting for changes for 1 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:42 PM 4168 (0x1048)
Wait timed out after 0 minutes while waiting for at least one trigger event. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:43 PM 4168 (0x1048)
Timed Out... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Did not find supported version of assembly Microsoft.UpdateServices.Administration. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Found supported assembly Microsoft.UpdateServices.Administration version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Found supported assembly Microsoft.UpdateServices.BaseApi version 4.0.0.0, file version 6.3.9600.16384 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Supported WSUS version found SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:53 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
Verify Upstream Server settings on the Active WSUS Server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:55 PM 4168 (0x1048)
No changes - WSUS Server settings are correctly configured and Upstream Server is set to Microsoft Update SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Setting new configuration state to 4 (WSUS_CONFIG_SUBSCRIPTION_PENDING) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Refreshing categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:53:56 PM 4168 (0x1048)
Successfully refreshed categories from WSUS server SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:27 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
Configuration successful. Will wait for 1 minute for any subscription or proxy changes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:54:32 PM 4168 (0x1048)
Setting new configuration state to 2 (WSUS_CONFIG_SUCCESS) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:32 PM 4168 (0x1048)
Attempting connection to WSUS server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
Successfully connected to server: confman.contoso.lan, port: 8530, useSSL: False SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:34 PM 4168 (0x1048)
PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~
at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile) SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
ERROR: Failed to publish sms client to WSUS, error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
STATMSG: ID=6613 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=confman.contoso.lan SITE=MON PID=1668 TID=4168 GMTDATE=Sat Dec 07 22:55:35.051 2013 ISTR0="8427071A-DA80-48C3-97DE-C9C528F73A2D" ISTR1="5.00.7958.1000"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
Failed to publish client with error = 0x80070003 SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
completed checking for client deployment SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
HandleSMSClientPublication failed. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
Trigger event array index 0 ended. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:35 PM 4168 (0x1048)
SCF change notification triggered. SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
Populating config from SCF SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
Waiting for changes for 58 minutes SMS_WSUS_CONFIGURATION_MANAGER 12/7/2013 5:55:40 PM 4168 (0x1048)
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

>Any Errors in SUPSetup.log and WSUSCtrl.log log files?
No errors in these files. As I mentioned there is no Schema folder in Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~
Here are 3 repetitive errors in WCM.log:
1. PublishApplication(8427071A-DA80-48C3-97DE-C9C528F73A2D) failed with error System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files\Update Services\Schema\baseapplicabilityrules.xsd'.~~   at System.IO.__Error.WinIOError(Int32
errorCode, String maybeFullPath)~~   at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath,
Boolean bFromProxy, Boolean useLongPath, Boolean checkHost)~~   at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)~~
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize)~~   at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn)~~   at System.Xml.XmlTextReaderImpl.FinishInitUriString()~~
at System.Xml.XmlReaderSettings.CreateReader(String inputUri, XmlParserContext inputContext)~~   at System.Xml.Schema.XmlSchemaSet.Add(String targetNamespace, String schemaUri)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage.Verify(String
packageFile)~~   at Microsoft.UpdateServices.Administration.Internal.UpdateServicesPackage..ctor(String packageFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.Publisher.LoadPackageMetadata(String sdpFile)~~   at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetPublisher(String
sdpFile)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.PublishApplication(String sPackageId, String sSDPFile, String sCabFile)
2. Failed to publish client with error = 0x80070003
3. HandleSMSClientPublication failed.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Flex Config File DTDs or Schemas

Similar Messages

Maybe you are looking for