FlexBuilder 3 not stopping at Break Points

Hi ,
when i am putting BreakPoints on to FlexBuilder on to DebugPerspective , its not stopping at Break Points , please let me know what do i need to install for this to stop at Break Points ??
Please find the screenshot attached of the related error .
Thanks in advance .

Hi,
Check your Run/Debug settings. Make sure that the launched file is the same as the one in the settings page.

Similar Messages

Debugger Not Stopping at Break Points

Howdy folks,
I am trying to debug a rule in which I checkout / modify / checkin a renameUser view. I set some break points at the invoke statements for checking out and checking in. The rule is called from my Update User workflow. I know the rule is executing because I am dumping the context to a text xml file. The break points are right before and after the invoke that dumps the context to xml. However, when I update someone the debugger is not breaking in and stopping the thread to let me step through it. I would really like to see why my checkin and checkout invokes are not working, but can't see the error message due to the debugger not stopping...
Does anyone have any advice, clues or ideas to get the debugger to work more correctly?

It's probably running anonymously. That was my issue I think. The break points don't work on anonymous execution. At least not for me. Now, you can specify to use anonymous break points.. But then it breaks at EVERY anonymous break point. I had a hard time stepping through them all to get to what I needed to see execute, before it would time out... good Luck...

I created a movie in elements 11, now the cti will not stop at end point, how to fix this?

I created a movie and now the CTI will not stop at end point. How to fix this?

Timeline too long (orphans) http://forums.adobe.com/thread/652216?tstart=30

"Thread Being Stopped" during break points

Hello Everyone,
I read few threads about this topic but couldn't find a solution. So, if anyone has a solution please help me.
I am using Visual Basic .NET 2003 and SAP BO 2005 Patch 31.
I couldn't use breakpoints because I am getting this exception "Thread being Stopped". It is giving me a hard time programming.
I used to have patch 25 and earlier I could use the breakpoints without any problems. But recently I upgraded it to patch 31. After I upgraded it, I am not able to use the breakpoints because of this error.
Any advise regarding this problem is welcome.
Thanking you,
Yours,
CK.

Hi Chanikya!
i use Microsoft Visual Studio .Net 2003 / SAP B1 2005 A PL 31
in this case i've made my experience that if you want to step during the break points, there will be problems if you want to access objects from SAPbobsCOM..but if you want to access objects from SAPbouiCOM, there are no problems.
I don't know how to solve this, but maybe this is your problem too...
hopeithelps
Matthias

Break-point in field Exit

Hi Gurus,
How can we keep a break point in filed exit . can any one help me .
I Kept break point in the functional module(field exit) but when i execute cursor is not stopping at break point.
can any one help me
thanking in advance.
Thanking you,
Raju

Hi,
The following ABAP statements are not allowed in the function modules of field exits:
BREAK-POINT, " We can not ues this statment
CALL SCREEN, CALL DIALOG, CALL TRANSACTION, SUBMIT,
COMMIT WORK, ROLLBACK WORK,
COMMUNICATION RECEIVE,
EXIT FROM STEP-LOOP,
MESSAGE I, MESSAGE W.
Field exits have to be tested in isolation in the development environment. To analyze problems that occur only in the screen environment, the relevant variables can be written to the file system using TRANSFER... and can be analyzed there.
<b>Conclusion is We can not debug the Field Exits</b>
Regards
Sudheer

Dual-layer break point is not cooperating!

I have authored a dual layer disk. I have tagged chapter 18 as the dual-layer break point. In the project chapter 18 is clearly tagged properly, including the little black dot appearing in the proper place on the timeline. But after the disk is burned, which I am having to do using Toast and and external burner, the dual-layer break point is happening on chapter 19. Does anyone know why this would be happening. Thanks in advance for any help you can provide.

As a follow-up to Jake's answer, the reason Toast does its own thing with respect to the dual layer break point is because the .img file that DVDSP saves does not contain any break point information. So, you'd have the same problem with any burning program, not just Toast.
This is on p. 584 of the DVDSP 4.1 manual, if anyone's interested.

Debug Break Points Not working - Attn Shay

I have one application that when run can navigate to another application. I am trying to debug the interation between the two applications. When I start the first application in debug from within Jdeveloper (embedded OC4J) and then navigate through a link to the second application I am not hitting the break points set up in the app module of the second application. Is there any thing special I have to do to have the break points in the second application visible to the first application?
I am running JDeveloper 10.1.3.2.0, with ADF BC applications.

I am a little confused. Are there parameters that have to be added to the configuration on the OC4J embedded server. It looks like from Shay's doc that parameters were added to kick off java externally.
Also, I did add the xml in Shay's doc to the embedded OC4J global-web-application.xml file and it errored off. Does the code need to go under the *.JSPX mapping seen below? Do any changes need to occur to the xml, customizations?
<servlet-mapping>
<servlet-name>JDevOJSP</servlet-name>
<url-pattern>/*.jsp</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>JDevOJSP</servlet-name>
<url-pattern>/*.JSP</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>JDevOJSP</servlet-name>
<url-pattern>/*.jspx</url-pattern>
<url-pattern>/*.jsp</url-pattern>
</servlet-mapping>

Break point in BADI

Hi,
I am trying to keep a break point in BADI for PBEN0014 which I implemented using a method. But it does not stop at that point and gets the output directly. Is there any way to make the payroll stop at breakpoint in BADI.
Thanks.
Osacr

There is an quicker way to finding a BADI and BADI implementations for a transaction:
SE37 display Function Module - SXV_GET_CLIF_BY_NAME.
Set a BREAKPOINT on call function SXV_ADD_PREFIX .
In another SESSION run the desired transaction, parameter 'name' gives the BADI; parameter 'clif ' gives implementation, e.g. for TCode MIGO name = MB_MIGO_BADI, clif = CL_EX_MB_MIGO_BADI .
Hope this helps.

Break point through the program

i am using the statement break <sy-uname> to set the breakpoint. But the control is not stopping at that point. how do i do that.

Hi,
Is the break-point given in an update task module..Then I believe it will not stop..
Also you have to give in single quotes..
Example..
BREAK 'USER1'.
Thanks,
Naren

Break point in sapscript

hi all,
how can i stop with break point in sapscript.
i know the way: utilities, activate debugger and a lot of f5 or f8 until i came to the place i need to stop. this is a very slaw way. it's something more quickly ?
thanks,
dany

Hi Dany
What you already know is again going to serve your purpose again but with some additional knowledge.
Just see the 'ELEMENT' in the SapScript code in which relevent information is there where you would like to stop. Say, you would like to stop at ELEMENT 'LINES'...
When you run your program with Sapscript debugger activated, when it goes to debugger on script very first time, you get a POP-UP window which you might be always ignoring by simple pressing button for 'Continue' but that is really useful!
You can exploit the options there for your advantage.
Example: there is a field there for 'ELEMENT', you can simply put your element name and see the magic. there are other options also like 'WINDOW', etc. to filter what you want to debug.
Cheers
Ashish

BADI BUPA_INBOUND debug not stopping at the break point

Hi Guys,
When downloading the customer master from ECC to CRM BP category type is defaulting to Organizations for type person. Am trying to change this based on a condition in the BADI BUPA_Inbound. I set a external break point in this badi but when tried to download the customer master from ECC debug is not stopping in the badi.
Could anyone please guide me to solve this issue?
Thanks,
Sundar

Praveen,
just have a look at sample code of VOFM.
Go to the routine number that needs to be copied.
Put your cursor on the routine number field that needs to be copied.
Overwrite that number with your new routine number and hit enter.
The new routine will be created as a copy of the old routine and you can modify the new routine as you need it.
Ex.
You have to copy routine 104 to 904
Routine number Description Active
104 Bill.bus.item data X
Put your cursor on 104 and then change it to 904 and hit enter.
904 will be created as a copy of 104 and you can make your changes in 904.
Don't forget to activate it after you are done.
Hope it helps.

Break points are not triggering in RFC from portal application

Helllo,
I am running Biller Direct application from portal, which is triggering a standard SAP RFC FM back end, am trying to debug my execution from portal, for this i put the External Break point, Session break-poiint at the beginning of this SAP RFC FM, but, its not stoppping at ll, here the user is a Web user, not dialog user.
How can i stop my execution in this SAP RFC FM to check how the structures are populated?
Thank you

Hi Raju,
Please try the below way and check if it works.
Open the RFC in R/3 i.e.
SE37 -> give FM NAME -> DISPLAY.
Click on UTILITIES -> SETTINGS -> CLICK THE TAB debugging.
In the screen against the field users : give the value 'WEBLOGIN'.
Uncheck the FLAG 'IP MATCHING'.
And at the bottom check the check box against the field
'Session Break Point Activate Immediately'.
Save these settings.
Then go to the line at which you want to debug the code and put an external break point over there.
But, please take care of one thing as we are giving it as a WEBLOGIN, when ever some logs in, it will reach the brteak point and stop there. We have to click F8 to continue. Or else, the portal will be hanged for them.
Thanks & regards,
Y Gautham

Break Points while remote debugging not working in Eclipse

I have set up my tomcat to listen for debugger connections on the default pot 8000. Now when I set break points in the code, it does not show the execution stop at that particular line.
Now why would that be? Am I missing somethiing?
I have built the files with debugging on.
thanks
M

http://kaustavdm.in/2014/08/connect-firefox-os-spreadtrum-device-adb.html
check this out, it should fix all your problems !

I am keeping break-point in J_1I7_USEREXIT_CALC_EXC_BASE it's not stoping?

Hi all,
There is an user exit J_1I7_USEREXIT_CALC_EXC_BASE which has the KONV structure, you may put your logic to derive the excise base and pass it to field EXCITM_BASE which will update the assesable value. For example, you will have the JEXP condition in the KONV structure, you may pass te base values used for the JEXP as the value to the field EXCITM_BASE.
Actually i have to get stop in that FM by using break-point.
I am running J1IIN tcode.but it is not stoping in that FM.
Which T.Code i have to run for to get stop in that FM.
If my break-point will work to stop in that FM means my problem will be solved.
Please help me if any body knows solution?
Thanks & Reagrds,
J.Lokesh

write a code break-poink. in ur logic and execute the corresponding T.code. If It is Useful give me Reward points.
Regards,
babu

Break point does not work

Hi Friends,
I have a Smartform and a print program. I have made some changes to the Smartform and then I am trying to pass some data from Print Program to the Smart form.
But the data does not pass. When I try to debug the debugger does not start.
It directly creates the Spool. I have kept break points in the Print Program when I Call the Function Module.
I have hardcoded the break points in the smart form.
BREAK-POINT.....and also break ACCCC.(User Name).
It does not stop, the transaction that I use is VG02.
VG02>Enter the Group No>Click on Output>Enter the Message type>Select and click on Communication-->
I give LOCL --> and Come back and hit the save button.
After that when I look into spool it creates a spool.
Can any one suggest me where I am doing wrong..
Thanks,
chaithanya

Thanks for your replies.......
I have re-executed the transaction. But it did not stop at the break point.
Can any one explain me about the UPDATE task. How to check it. I have activated the code and the Smartform.
I made several break points in the print program, but I don't knw why it does not stop.
When I execute the Smartform. It goes to SE37 and when I execute it(F8). Add some data in the internal table and run it. It stops at the break point where I wrote break AXXX.
Thanks & Regards,
Chaithanya.

FlexBuilder 3 not stopping at Break Points

Similar Messages

Maybe you are looking for