FlexUnit4 - Tests run but runner has to be manually closed and no reports generated.

I am trying out FlexUnit4 and using ant to build the tests.
I built my ant script on the one from the FlexUnit4SampleCIProject.
The test from that project run, the runner automatically closes and the reports are generated, my project however does not close the runner and generate reports.
I am using flexsdk 3.3
What could i be doing wrong?

Morning guys,
Mike and I worked through the race condition issue this evening/morning and new code should be in SVN as you read this post. The short of it was that sometimes the FlashPlayer would spin up faster than the socket on the Java side and data was being lost along the way. We've implemented a handshake between the CIListener and the Ant task so we can guarantee that things are working correctly now. I've also done a shallow refactoring of the code to decouple some responsibilities so we can more easily test things going forward. I've also updated the threading code to use stuff from Java 5, so going back to Java 1.4 will be a pain, but is still feasible with a few extra JARs.
Let us know how it goes.
-Brian

Similar Messages

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

My iPod 5th gen touch went through the washing machine. It still works but it has water in the screen and I can't get it out. I put it in uncooked rice for a day but it didn't work. And suggestions??

My iPod 5th gen touch went through the washing machine. It still works but it has water in the screen and I can't get it out. I put it in uncooked rice for a day but it didn't work. And suggestions??

Leave it in the rice for at least a day and change the rice every other day or so. The rice and iPod should be in a sealed container.
Apple will exchange your iPod for a refurbished one for $149. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

Error message "Firefox is already running but is not responding" - I have read and action the KB - no fix

So before we start - I have read the KB (https://support.mozilla.org/en-US/kb/firefox-already-running-not-responding) and actioned the advice on how end the processes, delete the parental lock, etc. This gives a temporary but one time only fix and does not resolve the overall issue.
I have also uninstalled and reinstalled the application.
So why do I get the Error message "Firefox is already running but is not responding"?

See also:
*http://kb.mozillazine.org/Profile_in_use
Note that in Firefox 13+ (expected to be released June 5) the parent.lock file is no longer deleted after closing Firefox to make it possible to check for startup crashes, so the presence of that file will in the future no longer indicate a problem.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Firefox 29.0.1 on Windows 7 (64-bit): ALWAYS get "Firefox is already running but not responding..." error and need Task Manager to close/restart Firefox.

I run Firefox 29.0.1 on Windows 7 (64 bit) and I get the "Firefox is already running but not responding. In order to open the program you must close the existing window." error. EVERY TIME I try to start Firefox. The posted solution works to start the program, but it is not a permanent solution. I go through the Task Manager and end the old Firefox process, then I can open a new window. While working, I can open multiple tabs and multiple windows, everything seems to (usually) work the way it should. Then after I completely exit Firefox, in order to open the program again I need to fix the SAME error again. Every time. It doesn't seem to hurt anything really, but it is quite annoying.
I used to get this same error on some of the older Firefox versions but it was only once in a while. With the new 29.0.1 it is literally EVERY TIME I TRY TO RUN FIREFOX!!!!
So, down to the big question: is there a permanent fix for this yet? Or will there be one included in the next version update? Or am I going to have to go back to Internet Explorer? I know I am not alone in this experience; i've seen several other users posting similar questions but none of them received satisfactory answers. So what's the story here, team Firefox?

'''https://support.mozilla.org/questions/997866?esab=a&s=&r=1&as=s'''.<BR>
This is not a cure but will make it easier if Firefox locks up.

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp does not respond when clicked, and will not quit. help?

I am suddenly unable to open mail from the dock. dock shows mail is up and running, but stamp icon does not respond when clicked, there is no mail window opened, and will not quit. when double clicked, get new mail is not an option and I get no response with other actions.
I am retrieving mail on my phone with no problem. this just began happening, no updates or problems with anything else.
help?

command-option-esc keys and force quit Mail. Then relaunch.

I downloaded the new operting system, but automaticlly has changed the calling tone and now I can't download the song I had in the calling tone. Someone can help?

I downloaded the new operating system in my Iphone and automatically has changed the calling tone and now I can't download the song I had.
Someone can help me?

Try deleting the app and redownloading by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Laserjet Pro 200 color M251NW no longer has wireless option in menu and now reports says it is M251N

I had my M251NW setup and printing wirelessly. Everything worked great. I then noticed the wifi light was flashing blue. I tried to print to it and nothing printed. I checked the network settings and it said it wasn't connected to my wireless network. I tried to restart the printer and then when it came back up the wireless section in the menu was missing. I tried leaving it unplugged for several minutes and still no wireless section in the menu when it starts up. I printed a network and configuration report and it said it was a M251N Not a M251NW! I downloaded the latest firmware to it (20140108). And still nothing. I have no way to turn the wireless back on and I believe the printer thinks it is the M251N not the M251NW. Has anyone seen this before? How do I correct the problem? Am I missing something simple? Please help.
Thank you

Hi,
Could you please send me the product number listed n the back of the printer? You may also send me the serial number via a Private Message below:
h30434.www3.hp.com/t5/notes/privatenotespage/tab/compose/note-to-user-id/265521
I would also suggest trying to reflash the firmware via a USB and check if that may cause any difference.
Turn the pritner of and back on, then temporary connect it to the PC via a USB and follow the FW upgrade by selecting the newly added USB printer queue:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-108129-5&cc=us&dlc=en&lc=en...
Please let me know if that helps, otherwise clarify accordingly.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Why won't my iPod work on iTunes or my computer? It shows up (not on iTunes) and the iPod shows connected but it has to be "formatted." And why are half my songs unable to play on it anymore? It just skips them!

I've read through several discussions and I've seen a lot of similar issues but none that were quite like mine. Every time I plug my 3rd gen. iPod nano in it shows it connected on the iPod screen and iTunes opens up but the device does not show up in iTunes. The icon on the iPod shows connected and gives the arrows circling showing syncing even though it still says connected. But it won’t show up in iTunes. It shows up on my windows computer but I can’t click it or make it do anything. It keeps saying “You need to format the disk before you can do anything.” And when I hit cancel it beeps and says "Location not available. Dara error (cyclic redundancy check)." As if I know what that means!! And I have 800 songs on it but they aren’t all on my computer and some are on my parents’ computer but I can’t get to that one. It shows it is a “FAT32” which I have no clue what that means but I’ve never noticed that before.
Windows "can't access the disk" and I don't know why. It gives me that notification if I try to check the drive or disk or device for problems. And if you click it on Windows it pops up a screen with formatting things (which I don't know anything about). And then it closes and says that it CANNOT format the device.
The iPod works almost okay when it isn’t plugged in, but I’ve noticed that half my songs won’t play. You click on it and it plays the next one in the album. And it isn’t always the first song in an album but random songs. And songs I listen to a lot. You can’t go back (you can only go forward and you can’t skip over the ‘missing’ song) or even click to select those songs. But other songs play normal, just not half of them that are on the iPod but all of a sudden no longer work. And I don’t know why. I have another 3rd gen. iPod nano that doesn’t have ANY of these problems. It hooks up, it doesn’t need formatting, and all its songs play. I don’t know what is wrong or what to do. I’ve tried re-downloading iTunes and everything. I don’t want to have to reset my iPod and lose everything.
I’ve tried locating the device in iTunes and it shows the iPod but it gives this weird symbol and I can’t select it. It’s like a white box with a box that is outlined in blue with six random icons in the middle. I’ve seen it before and it always means something is wrong or a file (which is where I have seen it before) is corrupted. And like I said I have a second iPod nano of the same generation and it does not give this weird symbol. Plus it connects just fine. It’s this one iPod.
I don’t understand what is going on. It worked just fine and then all of a sudden I noticed songs wouldn’t play so I went to plug it into iTunes and nothing has worked. I’ve searched discussions and none of the tips help. But I want my songs to play again and I want my iPod back.

Hey briannagrace96,
Welcome to Apple Support Communities! I'd check out the following article, it looks like it applies to your situation:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
You'll want to go through the following troubleshooting steps, and for more detail on each step follow the link to the article above:
Try the iPod troubleshooting assistant:
If you have not already done so, try the steps in the iPod Troubleshooting Assistant (choose your iPod model from the list).
If the issue remains after following your iPod's troubleshooting assistant, follow the steps below to continue troubleshooting your issue.
Restart the iPod Service
Restart the Apple Mobile Device Service
Empty your Temp directory and restart
Verify that the Apple Mobile Device USB Driver is installed
Change your iPod's drive letter
Remove and reinstall iTunes
Disable conflicting System Services and Startup Items
Update, Reconfigure, Disable, or Remove Security Software
Deleting damaged or incorrect registry keys
Take care,
David

I tried to change my password; it said I would get an email, but it has been 47 minutes now and no email. I tried it again and got a message the link was sent

in view of the hack of Adobe, I am changing all my passwords
I tried to change my Firefox password but my log-in and password were not accepted
I clicked the link to reset the password and it said I would get an email
that was at 8am; it is now 8:52 and the email has not shown up (yes I looked in the junk email)
I clicked the link again and got a message that the email had been already sent....
but it had not been
I am feeling VERY nervous now

What Firefox Password, the Master Password?
* [[Use a Master Password to protect stored logins and passwords]]
Or your email provider's password (you would need to contact them).

SCCM 2012 client in capture but deploy has default step "Setup Windows and ConfigMgr"

Hi,
We have our SCCM 2012 client in the capture but the deploy has a single step "Setup Windows and ConfigMgr" in which there is no option to NOT install the sccm 2012 client.
So what happens then, the client is installed a second time?
Please advise.
J.
Jan Hoedt

Hello !
This is a mandatory step in order to configure Windows for a first use. In your case, the SCCM client will just be serialized, it's not a problem. The SCCM client has generally been prepared during the design capture.
Hope this helps.
Note: This posting is provided 'AS IS' with no warranties or guarantees, and confers no rights. Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and
recognises useful contributions.

My wife and I share a calendar in a .mac account, but she has her own apple ID and iTunes account

I have long had a .mac account that I use mostly to share calendars among my machines, which include my desktop iMac and MacBook Air, and my wife's desktop Mac and her iPad. She has her own iTunes account which I don't need access to, we each have our own AddressBook and Mail accounts which we don't wish to share. All machines are iCloud capable.
We only wish to share claendars.
How do we accommodate this in iCloud?
Thanks,
Chuck

I've a related problem...I believe. I have a MobileMe account with two "email only" accounts. Both of the email- onlys are quite active with lots of emails. I want to move everything to the cloud.
My Question: must I follow a specific order of moving to iCloud in order to preserve the data on the mail-onlys? e.g. move the email-onlys first or move them last? Or in some special manner. And I want to avoid much downtime? The "email only" kind of account doesn't seem to be listed in the documents I've read, except in my MobileMe Account Summary.
TIA

PC Tools Browser Defender uninstalled but it has left "search defender" behind and I cannot uninstall it

PC Tools (without asking) installed a program called Browser Defender in Firefox. Uninstalled it but now when I type a search question into the address box (not the Search box) up comes PC Tools Search Defender with its version of a search engine.
How can I get rid of this please? It's not in Add-Ons or showing in list of progs to delete in control panel - nor in the registry.

Reset this pref. <br />
http://kb.mozillazine.org/Keyword.URL

HT1267 I need to reset my phone to it's original settings after backing it up, but it has been locked for months and I can NOT remember the password. What do I do??? It's an iPhone 4

I need to reset my phone to it's original settings after backing it up. It has been locked for several months and I do not remember the passcode. How do I do this??? HELP!!!

-Options for when an iOS device gets locked because of forgotten password-
Restore (and reset password) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device)

I tryed to clear all content on my phone but it has a circle come up and has had this for about a hour i cant do anything with it not even turn it off help

i have tryed to clear all content from my iphone4 and now it just has a ring going around for the last hour it wont even turn off help

nt want to have to sit and go through my whole camera roll deleting my pictures.
So you do not want to keep any of the pictures you took with your iPhone 5?
Settings > General > Usage - Photos & Camera.
Swipe across Camera roll then tap Delete.

FlexUnit4 - Tests run but runner has to be manually closed and no reports generated.

Similar Messages

Maybe you are looking for