Float precision, help with fader

i am trying to write a little fader applet here but I can't get a float to actual have a decimal. i have this code to test the values
Float percent = new Float(CurrentFadeAmt/getSize().width);
currfade = new Color(r1 + (1*r3), g1 + (1*g3), b1 + (1*b3));
BackBuffer.setColor(currfade);
BackBuffer.setFont(new Font("Serif",Font.BOLD, 10));
BackBuffer.drawString("c:" + CurrentFadeAmt + " g:" + getSize().width,1,10);
BackBuffer.drawString("p:" + percent,1,getSize().height - 2);
g.drawImage(workspace,0,0,this);
I've tried using float's and Float's . the output is always something like
c:56 g:100
p:0.0
why?

I guess both CurrentFadeAmt and getSize().width are of type int and then an integer division is performed and therefore the result is truncated.
Solution:
You need to cast at least one operand to float before dividing.
float percent = (float) CurrentFadeAmt / getSize().width;

Similar Messages

  • I need help with XML Gallery Fade in out transition. somebody please help me :(

    I need help with XML Gallery Fade in out transition. somebody please help me
    I have my post dont want to duplicate it

    The problem doesn't lie with your feed, although it does contain an error - you have given a non-existent sub-category. You need to stick to the categories and sub-categories listed here:
    http://www.apple.com/itunes/podcasts/specs.html#categories
    Subscribing to your feed from the iTunes Store page work as such, but the episodes throw up an error message. The problem lies with your episode media files: you are trying to stream them. Pasting the URL into a browser produces a download (where it should play the file) of a small file which does not play and in fact is a text file containing (in the case of ep.2) this:
    [Reference]
    Ref1=http://stream.riverratdoc.com/RiverratDoc/episode2.mp3?MSWMExt=.asf
    Ref2=http://70.33.177.247:80/RiverratDoc/episode2.mp3?MSWMExt=.asf
    You must provide a direct link to the actual mp3 file. Streaming won't work. The test is that if you paste the URL of the media file (as given in the feed) into the address bar of a browser it should play the file.

  • Please help with column float problem in IE8

    Hi there,
    Sorry to be so pushy - but I am desperate for help!!
    Having serious problems with my site in some PC's showing Internet Explorer 8. My right column floated right is moving down the page underneath the left column..
    It shows fine on IE8 on my PC - however on my clients PC (vista with IE8) it is showing up as mentioned above. Is there a fix for this.
    Here is my link http://www.dooks.com/pgs/welcome.html
    The css is all there! If you need anything please let me know as I need to get this sorted - I have had serious issues with this site that I have never had before with other sites and am starting to think there is a bug in my software. I redid the index page and this one page (linked above) to see what my problems are - so help with query v appreciated.
    Many thanks,
    Karen

    Lawrence_Cramer wrote:
    A point to keep in mind is that IE8 is still in Beta.
    Not anymore.
    http://www.microsoft.com/Presspass/press/2009/mar09/03-18IE8AvailablePR.mspx
    "REDMOND, Wash. — March 18, 2009 — Today Microsoft Corp. announced the availability of Windows Internet Explorer 8, the new Web browser that offers..."
    Mark A. Boyd
    Keep-On-Learnin' :-)

  • Help with transitions and fade in / out

    I need help. I need some kind and infinitely patient personto explain, step by step, in simple words of less that one syllable how I can fade in my movie and how I can apply transitions between the clips.
    I’ve tried, oh have I tried. I’ve read the manual, I’ve watched three video’s on youtube (they were bad!), found a lot of quality online help but I still don’t get it.
    What I do get is random results.  Like my movie fades in once then it won’t do it again. Like I get the grey transition box but can’t extend the transition beyond0.1 of a second. Like I trim my movie and the transition removes the trim. And so on.
    So if some kind soul could help, or even point me in the direction of transitions made simple I’d appreciate it.
    Many  thanks.

    Transitions and FCE are all about Media Handles.
    Search this forum for mor info, you will find plenty.
    Here's a start:
    https://discussions.apple.com/message/1356445?messageID=1356445&amp%3b#1356445
    This may help for Fade in/out settings:
    https://discussions.apple.com/message/9037985#9037985
    Al

  • Help with css float

    I have a layout that I need help with please. The bright green panel is going to have a Flash file inserted but I need it to sit inside the detailsWrapper div, which needs to stretch to allow this to happen. The content is being generated through php modules and the details will vary in length, so I'm having difficulty styling this. I'm sure it's something obvious but I need help please!
    Here's the link: http://www.designermagic.co.uk/hobarts/reapitDetails.php?clearcache=true&pagevars=1-bedroo m-property-for-sale-in-London-N22-hobrps-ALE090002

    Your CSS code could use some tidying up. It's kind of a mess.  See details below.
    http://jigsaw.w3.org/css-validator/validator?profile=css21&warning=0&uri=http%3A%2F%2Fwww. designermagic.co.uk%2Fhobarts%2FreapitDetails.php%3Fclearcache%3Dtrue%26pagevars%3D1-bedro om-property-for-sale-in-London-N22-hobrps-ALE090002
    These statements are redundant.
    html, body, div, span, applet, object, iframe, h1, h2, h3, h4, h5, h6, {
        margin: 0;
        padding: 0;
        border: 0;
        outline: 0;
        font-size: 100%;
    margin: 0;
    padding: 0;
    body {
        margin-left: 0px;
        margin-top: 0px;
        margin-right: 0px;
        margin-bottom: 0px;
    Try changing the above code to just this.  * = the universal selector.
    margin: 0;
    padding: 0;
    border: 0;
    font-size: 100%;
    outline-style:none; /**outline is not on by default so unsure why you need this**/
    More on CSS Shorthand
    http://www.dustindiaz.com/css-shorthand/
    And you have HTML code errors but the symbols in your document are blocking the validator from giving results.
    http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.designermagic.co.uk%2Fhobarts %2FreapitDetails.php%3Fclearcache%3Dtrue%26pagevars%3D1-bedroom-property-for-sale-in-Londo n-N22-hobrps-ALE090002
    After you fix the code errors, post back with a URL to the new page.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    www.alt-web.com/
    www.twitter.com/altweb
    www.alt-web.blogspot.com

  • A little help with rutorrent

    Hi comrades,
    I use rtorrent in terminal without problems but recently I got interested in rutorrent.
    I've been following the rtorrent wiki and rutorrent wiki to get to this point.
    First of all rtorrent is working fine in terminal, but with rutorrent I only get to this far: http://i637.photobucket.com/albums/uu93 … 1403737709
    As you can see in the upeer right of the image it's trying to connect and in the log section is throwing me this:
    [25.06.2014 18:37:22] WebUI started.
    [25.06.2014 18:37:23] Bad response from server: (200 [parsererror,getplugins]) <?php require_once( "util.php" ); require_once( "settings.php" ); function pluginsSort($a, $b) { $lvl1 = (float) $a["info"]["plugin.runlevel"]; $lvl2 = (float) $b["info"]["plugin.runlevel"]; if($lvl1>$lvl2) return(1); if($lvl1<$lvl2) return(-1); return( strcmp($a["name"],$b["name"]) ); } function getFlag($permissions,$pname,$fname) { $ret = true; if(array_key_exists($pname,$permissions) && array_key_exists($fname,$permissions[$pname])) $ret = $permissions[$pname][$fname]; else if(array_key_exists("default",$permissions) && array_key_exists($fname,$permissions["default"])) $ret = $permissions["default"][$fname]; return($ret); } function getPluginInfo( $name, $permissions ) { $info = array( 'rtorrent.need'=>1, 'rtorrent.remote'=>'ok', 'rtorrent.external.warning'=>array(), 'rtorrent.external.error'=>array(), 'rtorrent.script.error'=>array(), 'rtorrent.php.error'=>array(), 'rtorrent.version'=>0x802, 'rtorrent.version.readable'=>'0.8.2', 'plugin.may_be_shutdowned'=>1, 'plugin.may_be_launched'=>1, 'plugin.runlevel'=>10.0, 'plugin.description'=>'', 'plugin.author'=>'unknown', 'plugin.dependencies'=>array(), 'php.version'=>0x50000, 'php.version.readable'=>'5.0.0', 'php.extensions.warning'=>array(), 'php.extensions.error'=>array(), 'web.external.warning'=>array(), 'web.external.error'=>array(), 'plugin.help'=>'', ); $fname = "../plugins/".$name."/plugin.info"; if(is_readable($fname)) { $lines = file($fname); foreach($lines as $line) { $fields = explode(":",$line,2); if(count($fields)==2) { $value = addcslashes(trim($fields[1]),"\\\'\"\n\r\t"); $field = trim($fields[0]); switch($field) { case "plugin.help": case "plugin.author": case "plugin.description": case "rtorrent.remote": { $info[$field] = $value; break; } case "plugin.may_be_shutdowned": case "plugin.may_be_launched": case "rtorrent.need": { $info[$field] = intval($value); break; } case "plugin.version": case "plugin.runlevel": { $info[$field] = floatval($value); break; } case "rtorrent.version": case "php.version": { $version = explode('.', $value); $info[$field] = (intval($version[0])<<16) + (intval($version[1])<<8) + intval($version[2]); $info[$field.'.readable'] = $value; break; } case "plugin.dependencies": case "rtorrent.external.warning": case "rtorrent.external.error": case "rtorrent.script.error": case "rtorrent.php.error": case "web.external.warning": case "web.external.error": case "php.extensions.warning": case "php.extensions.error": { $info[$field] = explode(',', $value); break; } // for compatibility case "author": case "description": { $info['plugin.'.$field] = $value; break; } case "remote": { $info['rtorrent.remote'] = $value; break; } case "need_rtorrent": { $info['rtorrent.need'] = intval($value); break; } case "version": case "runlevel": { $info['plugin.'.$field] = floatval($value); break; } } } } $perms = 0; if($permissions!==false) { if(!getFlag($permissions,$name,"enabled")) return(false); $flags = array( "canChangeToolbar" => 0x0001, "canChangeMenu" => 0x0002, "canChangeOptions" => 0x0004, "canChangeTabs" => 0x0008, "canChangeColumns" => 0x0010, "canChangeStatusBar" => 0x0020, "canChangeCategory" => 0x0040, "canBeShutdowned" => 0x0080, /* "canBeLaunched" => 0x0100, */ ); foreach($flags as $flagName=>$flagVal) if(!getFlag($permissions,$name,$flagName)) $perms|=$flagVal; if(!$info["plugin.may_be_shutdowned"]) $perms|=$flags["canBeShutdowned"]; } $info["perms"] = $perms; } return(array_key_exists("plugin.version",$info) ? $info : false); } function findRemoteEXE( $exe, $err, &$remoteRequests ) { $st = getSettingsPath().'/'.rand(); if(!array_key_exists($exe,$remoteRequests)) { $path=realpath(dirname('.')); global $pathToExternals; $add = ''; if(isset($pathToExternals[$exe]) && !empty($pathToExternals[$exe])) $add = " ".escapeshellarg($pathToExternals[$exe]); $req = new rXMLRPCRequest(new rXMLRPCCommand("execute", array( "sh", "-c", escapeshellarg(addslash($path)."test.sh")." ".$exe." ".escapeshellarg($st).$add))); $req->run(); $remoteRequests[$exe] = array( "path"=>$st, "err"=>array() ); } $remoteRequests[$exe]["err"][] = $err; } function testRemoteRequests($remoteRequests) { $ret = ""; foreach($remoteRequests as $exe=>$info) { $file = $info["path"].$exe.".found"; if(!is_file($file)) { foreach($info["err"] as $err) $ret.=$err; } else @unlink($file); } return($ret); } $jResult = "theWebUI.deltaTime = 0;\n"; $access = getConfFile('access.ini'); if(!$access) $access = "../conf/access.ini"; $permissions = parse_ini_file($access); $settingsFlags = array( "showDownloadsPage" => 0x0001, "showConnectionPage" => 0x0002, "showBittorentPage" => 0x0004, "showAdvancedPage" => 0x0008, "showPluginsTab" => 0x0010, "canChangeULRate" => 0x0020, "canChangeDLRate" => 0x0040, "canChangeTorrentProperties" => 0x0080, ); $perms = 0; foreach($settingsFlags as $flagName=>$flagVal) if(array_key_exists($flagName,$permissions) && $permissions[$flagName]) $perms|=$flagVal; $jResult .= "theWebUI.showFlags = ".$perms.";\n"; $jResult .= "theURLs.XMLRPCMountPoint = '".$XMLRPCMountPoint."';\n"; $jResult.="theWebUI.systemInfo = {};\ntheWebUI.systemInfo.php = { canHandleBigFiles : ".((PHP_INT_SIZE<=4) ? "false" : "true")." };\n"; if($handle = opendir('../plugins')) { ignore_user_abort(true); set_time_limit(0); makeDirectory(getTempDirectory()); if(!@file_exists($tempDirectory.'/.') || !is_readable($tempDirectory) || !is_writable($tempDirectory)) $jResult.="noty(theUILang.badTempPath+' (".$tempDirectory.")','error');"; if(!function_exists('preg_match_all')) { $jResult.="noty(theUILang.PCRENotFound,'error');"; $jResult.="theWebUI.systemInfo.rTorrent = { started: false, iVersion : 0, version : '?', libVersion : '?' };\n"; } else { $remoteRequests = array(); $theSettings = rTorrentSettings::get(true); if(!$theSettings->linkExist) { $jResult.="noty(theUILang.badLinkTorTorrent,'error');"; $jResult.="theWebUI.systemInfo.rTorrent = { started: false, iVersion : 0, version : '?', libVersion : '?', apiVersion : 0 };\n"; } else { if($theSettings->idNotFound) $jResult.="noty(theUILang.idNotFound,'error');"; $jResult.="theWebUI.systemInfo.rTorrent = { started: true, iVersion : ".$theSettings->iVersion.", version : '". $theSettings->version."', libVersion : '".$theSettings->libVersion."', apiVersion : ".$theSettings->apiVersion." };\n"; if($theSettings->mostOfMethodsRenamed) $jResult.="theWebUI.systemInfo.rTorrent.newMethodsSet = true;\n"; if($do_diagnostic) { $up = getUploadsPath(); $st = getSettingsPath(); @chmod($up,$profileMask); @chmod($st,$profileMask); @chmod('./test.sh',$profileMask & 0755); if(PHP_USE_GZIP && (findEXE('gzip')===false)) { @define('PHP_USE_GZIP', false); $jResult.="noty(theUILang.gzipNotFound,'error');"; } if(PHP_INT_SIZE<=4) { if(findEXE('stat')===false) $jResult.="noty(theUILang.statNotFoundW,'error');"; findRemoteEXE('stat',"noty(theUILang.statNotFound,'error');",$remoteRequests); } if(!@file_exists($up.'/.') || !is_readable($up) || !is_writable($up)) $jResult.="noty(theUILang.badUploadsPath+' (".$up.")','error');"; if(!@file_exists($st.'/.') || !is_readable($st) || !is_writable($st)) $jResult.="noty(theUILang.badSettingsPath+' (".$st.")','error');"; if(isLocalMode() && !$theSettings->idNotFound) { if($theSettings->uid<0) $jResult.="noty(theUILang.cantObtainUser,'error');"; else { if(!isUserHavePermission($theSettings->uid,$theSettings->gid,$tempDirectory,0x0007)) $jResult.="noty(theUILang.badTempPath2+' (".$tempDirectory.")','error');"; if(!isUserHavePermission($theSettings->uid,$theSettings->gid,$up,0x0007)) $jResult.="noty(theUILang.badUploadsPath2+' (".$up.")','error');"; if(!isUserHavePermission($theSettings->uid,$theSettings->gid,$st,0x0007)) $jResult.="noty(theUILang.badSettingsPath2+' (".$st.")','error');"; if(!isUserHavePermission($theSettings->uid,$theSettings->gid,'./test.sh',0x0005)) $jResult.="noty(theUILang.badTestPath+' (".realpath('./test.sh').")','error');"; } } if($theSettings->badXMLRPCVersion) $jResult.="noty(theUILang.badXMLRPCVersion,'error');"; } } $plg = getConfFile('plugins.ini'); if(!$plg) $plg = "../conf/plugins.ini"; $permissions = parse_ini_file($plg,true); $init = array(); $names = array(); $disabled = array(); $phpVersion = phpversion(); if( ($pos=strpos($phpVersion, '-'))!==false ) $phpVersion = substr($phpVersion,0,$pos); $phpIVersion = explode('.',$phpVersion); $phpIVersion = (intval($phpIVersion[0])<<16) + (intval($phpIVersion[1])<<8) + intval($phpIVersion[2]); $phpRequired = false; $userPermissions = array( "__hash__"=>"plugins.dat" ); $cache = new rCache(); $cache->get($userPermissions); $cantBeShutdowned = 0x0080; $canBeLaunched = 0x0100; $disabledByUser = 0x8000; $loadedExtensions = array_map("strtolower",get_loaded_extensions()); while(false !== ($file = readdir($handle))) { if($file != "." && $file != ".." && is_dir('../plugins/'.$file)) { if(!array_key_exists($file,$userPermissions)) $userPermissions[$file] = true; $info = getPluginInfo( $file, $permissions ); if($info) { if( $info["plugin.may_be_launched"] && getFlag($permissions,$file,"enabled")=="user-defined") { $info["perms"] |= $canBeLaunched; if(!$userPermissions[$file]) { $info["perms"] |= $disabledByUser; $disabled[$file] = $info; $info = false; } } else $info["perms"] |= $cantBeShutdowned; } if($info!==false) { if(!$theSettings->linkExist && $info["rtorrent.need"]) { $disabled[$file] = $info; continue; } if($info['php.version']>$phpIVersion) { $jResult.="noty('".$file.": '+theUILang.badPHPVersion+' '+'".$info['php.version.readable']."'+'.','error');"; $disabled[$file] = $info; continue; } $extError = false; foreach( $info['php.extensions.error'] as $extension ) if(!in_array( $extension, $loadedExtensions )) { $jResult.="noty('".$file.": '+theUILang.phpExtensionNotFoundError+' ('+'".$extension."'+').','error');"; $extError = true; } if($extError) { $disabled[$file] = $info; continue; } if(count($info['web.external.error']) || count($info['web.external.warning']) || count($info['rtorrent.external.error']) || count($info['rtorrent.external.warning'])) eval( getPluginConf( $file ) ); foreach( $info['web.external.error'] as $external ) { if(findEXE($external)==false) { $jResult.="noty('".$file.": '+theUILang.webExternalNotFoundError+' ('+'".$external."'+').','error');"; $extError = true; } else if($external=='php') $phpRequired = true; } if($extError) { $disabled[$file] = $info; continue; } if($theSettings->linkExist) { if($info['rtorrent.version']>$theSettings->iVersion) { $jResult.="noty('".$file.": '+theUILang.badrTorrentVersion+' '+'".$info['rtorrent.version.readable']."'+'.','error');"; $disabled[$file] = $info; continue; } foreach( $info['rtorrent.external.error'] as $external ) { findRemoteEXE($external,"noty('".$file.": '+theUILang.rTorrentExternalNotFoundError+' ('+'".$external."'+').','error'); thePlugins.get('".$file."').disable();",$remoteRequests); if($external=='php') $phpRequired = true; } foreach( $info['rtorrent.script.error'] as $external ) { $fname = $rootPath.'/plugins/'.$file.'/'.$external; @chmod($fname,$profileMask & 0755); if(!isUserHavePermission($theSettings->uid,$theSettings->gid,$fname,0x0005)) { $jResult.="noty('".$file.": '+theUILang.rTorrentBadScriptPath+' ('+'".$fname."'+').','error');"; $extError = true; } } if($extError) { $disabled[$file] = $info; continue; } foreach( $info['rtorrent.php.error'] as $external ) { $fname = $rootPath.'/plugins/'.$file.'/'.$external; @chmod($fname,$profileMask & 0644); if(!isUserHavePermission($theSettings->uid,$theSettings->gid,$fname,0x0004)) { $jResult.="noty('".$file.": '+theUILang.rTorrentBadPHPScriptPath+' ('+'".$fname."'+').','error');"; $extError = true; } } if($extError) { $disabled[$file] = $info; continue; } if(!isLocalMode()) { if($info["rtorrent.remote"]=="error") { $jResult.="noty('".$file.": '+theUILang.errMustBeInSomeHost,'error');"; $disabled[$file] = $info; continue; } if($do_diagnostic && ($info["rtorrent.remote"]=="warning")) $jResult.="noty('".$file.": '+theUILang.warnMustBeInSomeHost,'error');"; } } if($do_diagnostic) { if($theSettings->linkExist) foreach( $info['rtorrent.external.warning'] as $external ) findRemoteEXE($external,"noty('".$file.": '+theUILang.rTorrentExternalNotFoundWarning+' ('+'".$external."'+').','error');",$remoteRequests); foreach( $info['web.external.warning'] as $external ) if(findEXE($external)==false) $jResult.="noty('".$file.": '+theUILang.webExternalNotFoundWarning+' ('+'".$external."'+').','error');"; foreach( $info['php.extensions.warning'] as $extension ) if(!in_array( $extension, $loadedExtensions )) $jResult.="noty('".$file.": '+theUILang.phpExtensionNotFoundWarning+' ('+'".$extension."'+').','error');"; } $js = "../plugins/".$file."/init.js"; if(!is_readable($js)) $js = NULL; $php = "../plugins/".$file."/init.php"; if(!is_readable($php)) $php = NULL; $init[] = array( "js" => $js, "php" => $php, "info" => $info, "name" => $file ); $names[] = $file; } } } if($phpRequired) { $val = strtoupper(ini_get("register_argc_argv")); if( $val!=='' && $val!='ON' && $val!='1' && $val!='TRUE' ) $jResult.="noty(theUILang.phpParameterUnavailable,'error');"; } usort($init,"pluginsSort"); foreach($init as $plugin) { $jEnd = ''; $pInfo = $plugin["info"]; $deps = array_diff( $pInfo["plugin.dependencies"], $names ); if(count($deps)) { $jResult.="noty('".$plugin["name"].": '+theUILang.dependenceError+' ".implode(",",$deps)."','error');"; $disabled[$plugin["name"]] = $pInfo; continue; } $jResult.="(function () { var plugin = new rPlugin( '".$plugin["name"]."',".$pInfo["plugin.version"]. ",'".$pInfo["plugin.author"]."','".$pInfo["plugin.description"]."',".$pInfo["perms"].",'".$pInfo["plugin.help"]."' );\n"; if($plugin["php"]) require_once( $plugin["php"] ); else $theSettings->registerPlugin($plugin["name"],$pInfo["perms"]); if($plugin["js"]) { $js = file_get_contents($plugin["js"]); if($theSettings->isPluginRegistered($plugin["name"])) $jResult.=$js; else { if(strpos($js,"plugin.loadLang()")!==false) $jResult.="plugin.loadLang();"; } $jResult.="\n"; } $jResult.=$jEnd; $jResult.="\n})();"; } foreach($disabled as $name=>$pInfo) { $jResult.="(function () { var plugin = new rPlugin( '".$name."',".$pInfo["plugin.version"]. ",'".$pInfo["plugin.author"]."','".$pInfo["plugin.description"]."',".$pInfo["perms"].",'".$pInfo["plugin.help"]."' );\n"; $jResult.="plugin.disable(); "; if($pInfo["perms"] & $disabledByUser) $jResult.="plugin.unlaunch(); "; $jResult.="\n})();"; } $jResult.=testRemoteRequests($remoteRequests); $theSettings->store(); } closedir($handle); } cachedEcho($jResult,"application/javascript",true);
    [25.06.2014 18:37:23] Bad response from server: (200 [parsererror,getuisettings]) <?php require_once( 'util.php' ); $s = '{}'; $fname = getSettingsPath()."/uisettings.json"; $fo = fopen($fname, 'r'); if($fo!==false) { if(flock($fo, LOCK_SH)) { $s = @file_get_contents($fname); if($s==false) $s = '{}'; flock($fo, LOCK_UN); } fclose($fo); } cachedEcho($s,"application/json",true);
    For that log I believe I've a problem with permission, or rutorrent plugins.
    Here are my configuration files
    /etc/webapps/rutorrent/conf/config.php
    <?php
    // configuration parameters
    // for snoopy client
    @define('HTTP_USER_AGENT', 'Mozilla/5.0 (Windows NT 6.0; WOW64; rv:12.0) Gecko/20100101 Firefox/12.0', true);
    @define('HTTP_TIME_OUT', 30, true); // in seconds
    @define('HTTP_USE_GZIP', true, true);
    $httpIP = null; // IP string. Or null for any.
    @define('RPC_TIME_OUT', 5, true); // in seconds
    @define('LOG_RPC_CALLS', false, true);
    @define('LOG_RPC_FAULTS', true, true);
    // for php
    @define('PHP_USE_GZIP', false, true);
    @define('PHP_GZIP_LEVEL', 2, true);
    $schedule_rand = 10; // rand for schedulers start, +0..X seconds
    $do_diagnostic = true;
    $log_file = '/tmp/errors.log'; // path to log file (comment or leave blank to disable logging)
    $saveUploadedTorrents = true; // Save uploaded torrents to profile/torrents directory or not
    $overwriteUploadedTorrents = false; // Overwrite existing uploaded torrents in profile/torrents directory or make unique name
    $topDirectory = '/'; // Upper available directory. Absolute path with trail slash.
    $forbidUserSettings = false;
    $scgi_port = 5000;
    $scgi_host = "127.0.0.1";
    // For web->rtorrent link through unix domain socket
    // (scgi_local in rtorrent conf file), change variables
    // above to something like this:
    // $scgi_port = 0;
    // $scgi_host = "unix:///tmp/rpc.socket";
    $XMLRPCMountPoint = "/RPC2"; // DO NOT DELETE THIS LINE!!! DO NOT COMMENT THIS LINE!!!
    $pathToExternals = array(
    "php" => '/usr/bin/php', // Something like /usr/bin/php. If empty, will be found in PATH.
    "curl" => '/usr/bin/curl', // Something like /usr/bin/curl. If empty, will be found in PATH.
    "gzip" => '/usr/bin/gzip', // Something like /usr/bin/gzip. If empty, will be found in PATH.
    "id" => '/usr/bin/id', // Something like /usr/bin/id. If empty, will be found in PATH.
    "stat" => '/usr/bin/stat', // Something like /usr/bin/stat. If empty, will be found in PATH.
    $localhosts = array( // list of local interfaces
    "127.0.0.1",
    "localhost",
    $profilePath = '../share'; // Path to user profiles
    $profileMask = 0777; // Mask for files and directory creation in user profiles.
    // Both Webserver and rtorrent users must have read-write access to it.
    // For example, if Webserver and rtorrent users are in the same group then the value may be 0770.
    $tempDirectory = null; // Temp directory. Absolute path with trail slash. If null, then autodetect will be used.
    ~/.rtorrent.rc
    scgi_port = localhost:5000
    directory = /home/milo/Downloads
    session = /home/milo/.rutorrent/.session
    schedule = watch_directory,5,5,load_start=/home/milo/Downloads/*.torrent
    schedule = low_diskspace,5,60,close_low_diskspace=100M
    port_range = 49152-50000
    check_hash = no
    encryption = allow_incoming,try_outgoing,enable_retry
    dht = auto
    dht_port = 6881
    peer_exchange = yes
    /etc/php/php.ini
    [PHP]
    ; About php.ini ;
    ; PHP's initialization file, generally called php.ini, is responsible for
    ; configuring many of the aspects of PHP's behavior.
    ; PHP attempts to find and load this configuration from a number of locations.
    ; The following is a summary of its search order:
    ; 1. SAPI module specific location.
    ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
    ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
    ; 4. Current working directory (except CLI)
    ; 5. The web server's directory (for SAPI modules), or directory of PHP
    ; (otherwise in Windows)
    ; 6. The directory from the --with-config-file-path compile time option, or the
    ; Windows directory (C:\windows or C:\winnt)
    ; See the PHP docs for more specific information.
    ; http://php.net/configuration.file
    ; The syntax of the file is extremely simple. Whitespace and lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives following the section heading [PATH=/www/mysite] only
    ; apply to PHP files in the /www/mysite directory. Directives
    ; following the section heading [HOST=www.example.com] only apply to
    ; PHP files served from www.example.com. Directives set in these
    ; special sections cannot be overridden by user-defined INI files or
    ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
    ; CGI/FastCGI.
    ; http://php.net/ini.sections
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; Directives are variables used to configure PHP or PHP extensions.
    ; There is no name validation. If PHP can't find an expected
    ; directive because it is not set or is mistyped, a default value will be used.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
    ; previously set variable or directive (e.g. ${foo})
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; ^ bitwise XOR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = None ; sets foo to an empty string
    ; foo = "None" ; sets foo to the string 'None'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; PHP comes packaged with two INI files. One that is recommended to be used
    ; in production environments and one that is recommended to be used in
    ; development environments.
    ; php.ini-production contains settings which hold security, performance and
    ; best practices at its core. But please be aware, these settings may break
    ; compatibility with older or less security conscience applications. We
    ; recommending using the production ini in production and testing environments.
    ; php.ini-development is very similar to its production variant, except it's
    ; much more verbose when it comes to errors. We recommending using the
    ; development version only in development environments as errors shown to
    ; application users can inadvertently leak otherwise secure information.
    ; This is php.ini-production INI file.
    ; Quick Reference ;
    ; The following are all the settings which are different in either the production
    ; or development versions of the INIs with respect to PHP's default behavior.
    ; Please see the actual settings later in the document for more details as to why
    ; we recommend these changes in PHP's behavior.
    ; display_errors
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; display_startup_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; error_reporting
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; html_errors
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; log_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; max_input_time
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; output_buffering
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; register_argc_argv
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; request_order
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; session.gc_divisor
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; session.hash_bits_per_character
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; short_open_tag
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; track_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; url_rewriter.tags
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; variables_order
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS"
    ; php.ini Options ;
    ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
    ;user_ini.filename = ".user.ini"
    ; To disable this feature set this option to empty value
    ;user_ini.filename =
    ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
    ;user_ini.cache_ttl = 300
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    ; http://php.net/engine
    engine = On
    ; This directive determines whether or not PHP will recognize code between
    ; <? and ?> tags as PHP source which should be processed as such. It is
    ; generally recommended that <?php and ?> should be used and that this feature
    ; should be disabled, as enabling it may result in issues when generating XML
    ; documents, however this remains supported for backward compatibility reasons.
    ; Note that this directive does not control the <?= shorthand tag, which can be
    ; used regardless of this directive.
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/short-open-tag
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    ; http://php.net/asp-tags
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    ; http://php.net/precision
    precision = 14
    ; Output buffering is a mechanism for controlling how much output data
    ; (excluding headers and cookies) PHP should keep internally before pushing that
    ; data to the client. If your application's output exceeds this setting, PHP
    ; will send that data in chunks of roughly the size you specify.
    ; Turning on this setting and managing its maximum buffer size can yield some
    ; interesting side-effects depending on your application and web server.
    ; You may be able to send headers and cookies after you've already sent output
    ; through print or echo. You also may see performance benefits if your server is
    ; emitting less packets due to buffered output versus PHP streaming the output
    ; as it gets it. On production servers, 4096 bytes is a good setting for performance
    ; reasons.
    ; Note: Output buffering can also be controlled via Output Buffering Control
    ; functions.
    ; Possible Values:
    ; On = Enabled and buffer is unlimited. (Use with caution)
    ; Off = Disabled
    ; Integer = Enables the buffer and sets its maximum size in bytes.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; http://php.net/output-buffering
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ; http://php.net/output-handler
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    ; http://php.net/zlib.output-compression
    zlib.output_compression = Off
    ; http://php.net/zlib.output-compression-level
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ; http://php.net/zlib.output-handler
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    ; http://php.net/implicit-flush
    ; Note: This directive is hardcoded to On for the CLI SAPI
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated. A warning appears if the specified function is
    ; not defined, or if the function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func =
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 17
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/open-basedir
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/:/etc/webapps/rutorrent/conf/:/usr/share/webapps/rutorrent/php/:/usr/share/webapps/rutorrent/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-functions
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-classes
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ; http://php.net/syntax-highlighting
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long requests, which may end up
    ; being interrupted by the user or a browser timing out. PHP's default behavior
    ; is to disable this feature.
    ; http://php.net/ignore-user-abort
    ;ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; http://php.net/realpath-cache-size
    ;realpath_cache_size = 16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; http://php.net/realpath-cache-ttl
    ;realpath_cache_ttl = 120
    ; Enables or disables the circular reference collector.
    ; http://php.net/zend.enable-gc
    zend.enable_gc = On
    ; If enabled, scripts may be written in encodings that are incompatible with
    ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
    ; encodings. To use this feature, mbstring extension must be enabled.
    ; Default: Off
    ;zend.multibyte = Off
    ; Allows to set the default encoding for the scripts. This value will be used
    ; unless "declare(encoding=...)" directive appears at the top of the script.
    ; Only affects if zend.multibyte is set.
    ; Default: ""
    ;zend.script_encoding =
    ; Miscellaneous ;
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    ; http://php.net/expose-php
    expose_php = On
    ; Resource Limits ;
    ; Maximum execution time of each script, in seconds
    ; http://php.net/max-execution-time
    ; Note: This directive is hardcoded to 0 for the CLI SAPI
    max_execution_time = 30
    ; Maximum amount of time each script may spend parsing request data. It's a good
    ; idea to limit this time on productions servers in order to eliminate unexpectedly
    ; long running scripts.
    ; Note: This directive is hardcoded to -1 for the CLI SAPI
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; http://php.net/max-input-time
    max_input_time = 60
    ; Maximum input variable nesting level
    ; http://php.net/max-input-nesting-level
    ;max_input_nesting_level = 64
    ; How many GET/POST/COOKIE input variables may be accepted
    ; max_input_vars = 1000
    ; Maximum amount of memory a script may consume (128MB)
    ; http://php.net/memory-limit
    memory_limit = 128M
    ; Error handling and logging ;
    ; This directive informs PHP of which errors, warnings and notices you would like
    ; it to take action for. The recommended way of setting values for this
    ; directive is through the use of the error level constants and bitwise
    ; operators. The error level constants are below here for convenience as well as
    ; some common settings and their meanings.
    ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
    ; those related to E_NOTICE and E_STRICT, which together cover best practices and
    ; recommended coding standards in PHP. For performance reasons, this is the
    ; recommend error reporting setting. Your production server shouldn't be wasting
    ; resources complaining about best practices and coding standards. That's what
    ; development servers and development settings are for.
    ; Note: The php.ini-development file has this setting as E_ALL. This
    ; means it pretty much reports everything which is exactly what you want during
    ; development and early testing.
    ; Error Level Constants:
    ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; E_DEPRECATED - warn about code that will not work in future versions
    ; of PHP
    ; E_USER_DEPRECATED - user-generated deprecation warnings
    ; Common Values:
    ; E_ALL (Show all errors, warnings and notices including coding standards.)
    ; E_ALL & ~E_NOTICE (Show all errors, except for notices)
    ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
    ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; http://php.net/error-reporting
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; This directive controls whether or not and where PHP will output errors,
    ; notices and warnings too. Error output is very useful during development, but
    ; it could be very dangerous in production environments. Depending on the code
    ; which is triggering the error, sensitive information could potentially leak
    ; out of your application such as database usernames and passwords or worse.
    ; It's recommended that errors be logged on production servers rather than
    ; having the errors sent to STDOUT.
    ; Possible Values:
    ; Off = Do not display any errors
    ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout = Display errors to STDOUT
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-errors
    display_errors = Off
    ; The display of errors which occur during PHP's startup sequence are handled
    ; separately from display_errors. PHP's default behavior is to suppress those
    ; errors from clients. Turning the display of startup errors on can be useful in
    ; debugging configuration problems. But, it's strongly recommended that you
    ; leave this setting off on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-startup-errors
    display_startup_errors = Off
    ; Besides displaying errors, PHP can also log errors to locations such as a
    ; server-specific log, STDERR, or a location specified by the error_log
    ; directive found below. While errors should not be displayed on productions
    ; servers they should still be monitored and logging is a great way to do that.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/log-errors
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    ; http://php.net/log-errors-max-len
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ; http://php.net/ignore-repeated-errors
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ; http://php.net/ignore-repeated-source
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    ; http://php.net/report-memleaks
    report_memleaks = On
    ; This setting is on by default.
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean). Setting this value
    ; to On can assist in debugging and is appropriate for development servers. It should
    ; however be disabled on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/track-errors
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ; http://php.net/xmlrpc-errors
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; When PHP displays or logs an error, it has the capability of formatting the
    ; error message as HTML for easier reading. This directive controls whether
    ; the error message is formatted as HTML or not.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; http://php.net/html-errors
    html_errors = On
    ; If html_errors is set to On *and* docref_root is not empty, then PHP
    ; produces clickable error messages that direct to a page describing the error
    ; or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://php.net/docs
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot. PHP's default behavior is to leave these settings empty, in which
    ; case no links to documentation are generated.
    ; Note: Never use this feature for production boxes.
    ; http://php.net/docref-root
    ; Examples
    ;docref_root = "/phpmanual/"
    ; http://php.net/docref-ext
    ;docref_ext = .html
    ; String to output before an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-prepend-string
    ; Example:
    ;error_prepend_string = "<span style='color: #ff0000'>"
    ; String to output after an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-append-string
    ; Example:
    ;error_append_string = "</span>"
    ; Log errors to specified file. PHP's default behavior is to leave this value
    ; empty.
    ; http://php.net/error-log
    ; Example:
    ;error_log = php_errors.log
    ; Log errors to syslog (Event Log on Windows).
    ;error_log = syslog
    ;windows.show_crt_warning
    ; Default value: 0
    ; Development value: 0
    ; Production value: 0
    ; Data Handling ;
    ; The separator used in PHP generated URLs to separate arguments.
    ; PHP's default setting is "&".
    ; http://php.net/arg-separator.output
    ; Example:
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; PHP's default setting is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ; http://php.net/arg-separator.input
    ; Example:
    ;arg_separator.input = ";&"
    ; This directive determines which super global arrays are registered when PHP
    ; starts up. G,P,C,E & S are abbreviations for the following respective super
    ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
    ; paid for the registration of these arrays and because ENV is not as commonly
    ; used as the others, ENV is not recommended on productions servers. You
    ; can still get access to the environment variables through getenv() should you
    ; need to.
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS";
    ; http://php.net/variables-order
    variables_order = "GPCS"
    ; This directive determines which super global data (G,P,C,E & S) should
    ; be registered into the super global array REQUEST. If so, it also determines
    ; the order in which that data is registered. The values for this directive are
    ; specified in the same manner as the variables_order directive, EXCEPT one.
    ; Leaving this value empty will cause PHP to use the value set in the
    ; variables_order directive. It does not mean it will leave the super globals
    ; array REQUEST empty.
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; http://php.net/request-order
    request_order = "GP"
    ; This directive determines whether PHP registers $argv & $argc each time it
    ; runs. $argv contains an array of all the arguments passed to PHP when a script
    ; is invoked. $argc contains an integer representing the number of arguments
    ; that were passed when the script was invoked. These arrays are extremely
    ; useful when running scripts from the command line. When this directive is
    ; enabled, registering these variables consumes CPU cycles and memory each time
    ; a script is executed. For performance reasons, this feature should be disabled
    ; on production servers.
    ; Note: This directive is hardcoded to On for the CLI SAPI
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/register-argc-argv
    register_argc_argv = Off
    ; When enabled, the ENV, REQUEST and SERVER variables are created when they're
    ; first used (Just In Time) instead of when the script starts. If these
    ; variables are not used within a script, having this directive on will result
    ; in a performance gain. The PHP directive register_argc_argv must be disabled
    ; for this directive to have any affect.
    ; http://php.net/auto-globals-jit
    auto_globals_jit = On
    ; Whether PHP will read the POST data.
    ; This option is enabled by default.
    ; Most likely, you won't want to disable this option globally. It causes $_POST
    ; and $_FILES to always be empty; the only way you will be able to read the
    ; POST data will be through the php://input stream wrapper. This can be useful
    ; to proxy requests or to process the POST data in a memory efficient fashion.
    ; http://php.net/enable-post-data-reading
    ;enable_post_data_reading = Off
    ; Maximum size of POST data that PHP will accept.
    ; Its value may be 0 to disable the limit. It is ignored if POST data reading
    ; is disabled through enable_post_data_reading.
    ; http://php.net/post-max-size
    post_max_size = 8M
    ; Automatically add files before PHP document.
    ; http://php.net/auto-prepend-file
    auto_prepend_file =
    ; Automatically add files after PHP document.
    ; http://php.net/auto-append-file
    auto_append_file =
    ; By default, PHP will output a character encoding using
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    ; http://php.net/default-mimetype
    default_mimetype = "text/html"
    ; PHP's default character set is set to empty.
    ; http://php.net/default-charset
    ;default_charset = "UTF-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
    ; to disable this feature. If post reading is disabled through
    ; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
    ; http://php.net/always-populate-raw-post-data
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    ; PHP's default setting for include_path is ".;/path/to/php/pear"
    ; http://php.net/include-path
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    ; http://php.net/doc-root
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    ; http://php.net/user-dir
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    ; http://php.net/extension-dir
    extension_dir = "/usr/lib/php/modules/"
    ; On windows:
    ; extension_dir = "ext"
    ; Directory where the temporary files should be placed.
    ; Defaults to the system default (see sys_get_temp_dir)
    ; sys_temp_dir = "/tmp"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    ; http://php.net/enable-dl
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; http://php.net/cgi.force-redirect
    ;cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request. PHP's default behavior is to disable this feature.
    ;cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; http://php.net/cgi.redirect-status-env
    ;cgi.redirect_status_env =
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; http://php.net/cgi.fix-pathinfo
    ;cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; http://php.net/fastcgi.impersonate
    ;fastcgi.impersonate = 1
    ; Disable logging through FastCGI connection. PHP's default behavior is to enable
    ; this feature.
    ;fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ; http://php.net/cgi.rfc2616-headers
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    ; http://php.net/file-uploads
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ; http://php.net/upload-tmp-dir
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    ; http://php.net/upload-max-filesize
    upload_max_filesize = 2M
    ; Maximum number of files that can be uploaded via a single request
    max_file_uploads = 20
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-fopen
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-include
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address). PHP's default setting
    ; for this is empty.
    ; http://php.net/from
    ;from="[email protected]"
    ; Define the User-Agent string. PHP's default setting for this is empty.
    ; http://php.net/user-agent
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    ; http://php.net/default-socket-timeout
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; http://php.net/auto-detect-line-endings
    ;auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; ... or with a path:
    ; extension=/path/to/extension/msql.so
    ; If you only provide the name of the extension, PHP will look for it in its
    ; default extension directory.
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    extension=curl.so
    ;extension=dba.so
    ;extension=enchant.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=intl.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mssql.so
    ;extension=mysqli.so
    ;extension=mysql.so
    ;extension=odbc.so
    ;zend_extension=opcache.so
    ;extension=openssl.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=phar.so
    ;extension=posix.so
    ;extension=pspell.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite3.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    ; Module Settings ;
    [CLI Server]
    ; Whether the CLI web server uses ANSI color coding in its terminal output.
    cli_server.color = On
    [Date]
    ; Defines the default timezone used by the date functions
    ; http://php.net/date.timezone
    ;date.timezone =
    ; http://php.net/date.default-latitude
    ;date.default_latitude = 31.7667
    ; http://php.net/date.default-longitude
    ;date.default_longitude = 35.2333
    ; http://php.net/date.sunrise-zenith
    ;date.sunrise_zenith = 90.583333
    ; http://php.net/date.sunset-zenith
    ;date.sunset_zenith = 90.583333
    [filter]
    ; http://php.net/filter.default
    ;filter.default = unsafe_raw
    ; http://php.net/filter.default-flags
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [intl]
    ;intl.default_locale =
    ; This directive allows you to produce PHP errors when some error
    ; happens within intl functions. The value is the level of the error produced.
    ; Default is 0, which does not produce any errors.
    ;intl.error_level = E_WARNING
    [sqlite]
    ; http://php.net/sqlite.assoc-case
    ;sqlite.assoc_case = 0
    [sqlite3]
    ;sqlite3.extension_dir =
    [Pcre]
    ;PCRE library backtracking limit.
    ; http://php.net/pcre.backtrack-limit
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ; http://php.net/pcre.recursion-limit
    ;pcre.recursion_limit=100000
    [Pdo]
    ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
    ; http://php.net/pdo-odbc.connection-pooling
    ;pdo_odbc.connection_pooling=strict
    ;pdo_odbc.db2_instance_name
    [Pdo_mysql]
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/pdo_mysql.cache_size
    pdo_mysql.cache_size = 2000
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/pdo_mysql.default-socket
    pdo_mysql.default_socket=
    [Phar]
    ; http://php.net/phar.readonly
    ;phar.readonly = On
    ; http://php.net/phar.require-hash
    ;phar.require_hash = On
    ;phar.cache_list =
    [mail function]
    ; For Win32 only.
    ; http://php.net/smtp
    SMTP = localhost
    ; http://php.net/smtp-port
    smtp_port = 25
    ; For Win32 only.
    ; http://php.net/sendmail-from
    ;sendmail_from = [email protected]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ; http://php.net/sendmail-path
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
    mail.add_x_header = On
    ; The path to a log file that will log all mail() calls. Log entries include
    ; the full path of the script, line number, To address and headers.
    ;mail.log =
    ; Log mail to syslog (Event Log on Windows).
    ;mail.log = syslog
    [SQL]
    ; http://php.net/sql.safe-mode
    sql.safe_mode = Off
    [ODBC]
    ; http://php.net/odbc.default-db
    ;odbc.default_db = Not yet implemented
    ; http://php.net/odbc.default-user
    ;odbc.default_user = Not yet implemented
    ; http://php.net/odbc.default-pw
    ;odbc.default_pw = Not yet implemented
    ; Controls the ODBC cursor model.
    ; Default: SQL_CURSOR_STATIC (default).
    ;odbc.default_cursortype
    ; Allow or prevent persistent links.
    ; http://php.net/odbc.allow-persistent
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    ; http://php.net/odbc.check-persistent
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/odbc.max-persistent
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/odbc.max-links
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    ; http://php.net/odbc.defaultlrl
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of odbc.defaultlrl and odbc.defaultbinmode
    ; http://php.net/odbc.defaultbinmode
    odbc.defaultbinmode = 1
    ;birdstep.max_links = -1
    [Interbase]
    ; Allow or prevent persistent links.
    ibase.allow_persistent = 1
    ; Maximum number of persistent links. -1 means no limit.
    ibase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ibase.max_links = -1
    ; Default database name for ibase_connect().
    ;ibase.default_db =
    ; Default username for ibase_connect().
    ;ibase.default_user =
    ; Default password for ibase_connect().
    ;ibase.default_password =
    ; Default charset for ibase_connect().
    ;ibase.default_charset =
    ; Default timestamp format.
    ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
    ; Default date format.
    ibase.dateformat = "%Y-%m-%d"
    ; Default time format.
    ibase.timeformat = "%H:%M:%S"
    [MySQL]
    ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
    ; http://php.net/mysql.allow_local_infile
    mysql.allow_local_infile = On
    ; Allow or prevent persistent links.
    ; http://php.net/mysql.allow-persistent
    mysql.allow_persistent = On
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/mysql.cache_size
    mysql.cache_size = 2000
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/mysql.max-persistent
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/mysql.max-links
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    ; http://php.net/mysql.default-port
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/mysql.default-socket
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysql.default-host
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysql.default-user
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    ; http://php.net/mysql.default-password
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    ; http://php.net/mysql.connect-timeout
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    ; http://php.net/mysql.trace-mode
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/mysqli.max-persistent
    mysqli.max_persistent = -1
    ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
    ; http://php.net/mysqli.allow_local_infile
    ;mysqli.allow_local_infile = On
    ; Allow or prevent persistent links.
    ; http://php.net/mysqli.allow-persistent
    mysqli.allow_persistent = On
    ; Maximum number of links. -1 means no limit.
    ; http://php.net/mysqli.max-links
    mysqli.max_links = -1
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/mysqli.cache_size
    mysqli.cache_size = 2000
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    ; http://php.net/mysqli.default-port
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/mysqli.default-socket
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysqli.default-host
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysqli.default-user
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    ; http://php.net/mysqli.default-pw
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mysqlnd]
    ; Enable / Disable collection of general statistics by mysqlnd which can be
    ; used to tune and monitor MySQL operations.
    ; http://php.net/mysqlnd.collect_statistics
    mysqlnd.collect_statistics = On
    ; Enable / Disable collection of memory usage statistics by mysqlnd which can be
    ; used to tune and monitor MySQL operations.
    ; http://php.net/mysqlnd.collect_memory_statistics
    mysqlnd.collect_memory_statistics = Off
    ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
    ; http://php.net/mysqlnd.net_cmd_buffer_size
    ;mysqlnd.net_cmd_buffer_size = 2048
    ; Size of a pre-allocated buffer used for reading data sent by the server in
    ; bytes.
    ; http://php.net/mysqlnd.net_read_buffer_size
    ;mysqlnd.net_read_buffer_size = 32768
    [OCI8]
    ; Connection: Enables privileged connections using external
    ; credentials (OCI_SYSOPER, OCI_SYSDBA)
    ; http://php.net/oci8.privileged-connect
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ; http://php.net/oci8.max-persistent
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ; http://php.net/oci8.persistent-timeout
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ; http://php.net/oci8.ping-interval
    ;oci8.ping_interval = 60
    ; Connection: Set this to a user chosen connection class to be used
    ; for all pooled server requests with Oracle 11g Database Resident
    ; Connection Pooling (DRCP). To use DRCP, this value should be set to
    ; the same string for all web servers running the same application,
    ; the database pool must be configured, and the connection string must
    ; specify to use a pooled server.
    ;oci8.connection_class =
    ; High Availability: Using On lets PHP receive Fast Application
    ; Notification (FAN) events generated when a database node fails. The
    ; database must also be configured to post FAN events.
    ;oci8.events = Off
    ; Tuning: This option enables statement

    Hi comrades,
    I use rtorrent in terminal without problems but recently I got interested in rutorrent.
    I've been following the rtorrent wiki and rutorrent wiki to get to this point.
    First of all rtorrent is working fine in terminal, but with rutorrent I only get to this far: http://i637.photobucket.com/albums/uu93 … 1403737709
    As you can see in the upeer right of the image it's trying to connect and in the log section is throwing me this:
    [25.06.2014 18:37:22] WebUI started.
    [25.06.2014 18:37:23] Bad response from server: (200 [parsererror,getplugins]) <?php require_once( "util.php" ); require_once( "settings.php" ); function pluginsSort($a, $b) { $lvl1 = (float) $a["info"]["plugin.runlevel"]; $lvl2 = (float) $b["info"]["plugin.runlevel"]; if($lvl1>$lvl2) return(1); if($lvl1<$lvl2) return(-1); return( strcmp($a["name"],$b["name"]) ); } function getFlag($permissions,$pname,$fname) { $ret = true; if(array_key_exists($pname,$permissions) && array_key_exists($fname,$permissions[$pname])) $ret = $permissions[$pname][$fname]; else if(array_key_exists("default",$permissions) && array_key_exists($fname,$permissions["default"])) $ret = $permissions["default"][$fname]; return($ret); } function getPluginInfo( $name, $permissions ) { $info = array( 'rtorrent.need'=>1, 'rtorrent.remote'=>'ok', 'rtorrent.external.warning'=>array(), 'rtorrent.external.error'=>array(), 'rtorrent.script.error'=>array(), 'rtorrent.php.error'=>array(), 'rtorrent.version'=>0x802, 'rtorrent.version.readable'=>'0.8.2', 'plugin.may_be_shutdowned'=>1, 'plugin.may_be_launched'=>1, 'plugin.runlevel'=>10.0, 'plugin.description'=>'', 'plugin.author'=>'unknown', 'plugin.dependencies'=>array(), 'php.version'=>0x50000, 'php.version.readable'=>'5.0.0', 'php.extensions.warning'=>array(), 'php.extensions.error'=>array(), 'web.external.warning'=>array(), 'web.external.error'=>array(), 'plugin.help'=>'', ); $fname = "../plugins/".$name."/plugin.info"; if(is_readable($fname)) { $lines = file($fname); foreach($lines as $line) { $fields = explode(":",$line,2); if(count($fields)==2) { $value = addcslashes(trim($fields[1]),"\\\'\"\n\r\t"); $field = trim($fields[0]); switch($field) { case "plugin.help": case "plugin.author": case "plugin.description": case "rtorrent.remote": { $info[$field] = $value; break; } case "plugin.may_be_shutdowned": case "plugin.may_be_launched": case "rtorrent.need": { $info[$field] = intval($value); break; } case "plugin.version": case "plugin.runlevel": { $info[$field] = floatval($value); break; } case "rtorrent.version": case "php.version": { $version = explode('.', $value); $info[$field] = (intval($version[0])<<16) + (intval($version[1])<<8) + intval($version[2]); $info[$field.'.readable'] = $value; break; } case "plugin.dependencies": case "rtorrent.external.warning": case "rtorrent.external.error": case "rtorrent.script.error": case "rtorrent.php.error": case "web.external.warning": case "web.external.error": case "php.extensions.warning": case "php.extensions.error": { $info[$field] = explode(',', $value); break; } // for compatibility case "author": case "description": { $info['plugin.'.$field] = $value; break; } case "remote": { $info['rtorrent.remote'] = $value; break; } case "need_rtorrent": { $info['rtorrent.need'] = intval($value); break; } case "version": case "runlevel": { $info['plugin.'.$field] = floatval($value); break; } } } } $perms = 0; if($permissions!==false) { if(!getFlag($permissions,$name,"enabled")) return(false); $flags = array( "canChangeToolbar" => 0x0001, "canChangeMenu" => 0x0002, "canChangeOptions" => 0x0004, "canChangeTabs" => 0x0008, "canChangeColumns" => 0x0010, "canChangeStatusBar" => 0x0020, "canChangeCategory" => 0x0040, "canBeShutdowned" => 0x0080, /* "canBeLaunched" => 0x0100, */ ); foreach($flags as $flagName=>$flagVal) if(!getFlag($permissions,$name,$flagName)) $perms|=$flagVal; if(!$info["plugin.may_be_shutdowned"]) $perms|=$flags["canBeShutdowned"]; } $info["perms"] = $perms; } return(array_key_exists("plugin.version",$info) ? $info : false); } function findRemoteEXE( $exe, $err, &$remoteRequests ) { $st = getSettingsPath().'/'.rand(); if(!array_key_exists($exe,$remoteRequests)) { $path=realpath(dirname('.')); global $pathToExternals; $add = ''; if(isset($pathToExternals[$exe]) && !empty($pathToExternals[$exe])) $add = " ".escapeshellarg($pathToExternals[$exe]); $req = new rXMLRPCRequest(new rXMLRPCCommand("execute", array( "sh", "-c", escapeshellarg(addslash($path)."test.sh")." ".$exe." ".escapeshellarg($st).$add))); $req->run(); $remoteRequests[$exe] = array( "path"=>$st, "err"=>array() ); } $remoteRequests[$exe]["err"][] = $err; } function testRemoteRequests($remoteRequests) { $ret = ""; foreach($remoteRequests as $exe=>$info) { $file = $info["path"].$exe.".found"; if(!is_file($file)) { foreach($info["err"] as $err) $ret.=$err; } else @unlink($file); } return($ret); } $jResult = "theWebUI.deltaTime = 0;\n"; $access = getConfFile('access.ini'); if(!$access) $access = "../conf/access.ini"; $permissions = parse_ini_file($access); $settingsFlags = array( "showDownloadsPage" => 0x0001, "showConnectionPage" => 0x0002, "showBittorentPage" => 0x0004, "showAdvancedPage" => 0x0008, "showPluginsTab" => 0x0010, "canChangeULRate" => 0x0020, "canChangeDLRate" => 0x0040, "canChangeTorrentProperties" => 0x0080, ); $perms = 0; foreach($settingsFlags as $flagName=>$flagVal) if(array_key_exists($flagName,$permissions) && $permissions[$flagName]) $perms|=$flagVal; $jResult .= "theWebUI.showFlags = ".$perms.";\n"; $jResult .= "theURLs.XMLRPCMountPoint = '".$XMLRPCMountPoint."';\n"; $jResult.="theWebUI.systemInfo = {};\ntheWebUI.systemInfo.php = { canHandleBigFiles : ".((PHP_INT_SIZE<=4) ? "false" : "true")." };\n"; if($handle = opendir('../plugins')) { ignore_user_abort(true); set_time_limit(0); makeDirectory(getTempDirectory()); if(!@file_exists($tempDirectory.'/.') || !is_readable($tempDirectory) || !is_writable($tempDirectory)) $jResult.="noty(theUILang.badTempPath+' (".$tempDirectory.")','error');"; if(!function_exists('preg_match_all')) { $jResult.="noty(theUILang.PCRENotFound,'error');"; $jResult.="theWebUI.systemInfo.rTorrent = { started: false, iVersion : 0, version : '?', libVersion : '?' };\n"; } else { $remoteRequests = array(); $theSettings = rTorrentSettings::get(true); if(!$theSettings->linkExist) { $jResult.="noty(theUILang.badLinkTorTorrent,'error');"; $jResult.="theWebUI.systemInfo.rTorrent = { started: false, iVersion : 0, version : '?', libVersion : '?', apiVersion : 0 };\n"; } else { if($theSettings->idNotFound) $jResult.="noty(theUILang.idNotFound,'error');"; $jResult.="theWebUI.systemInfo.rTorrent = { started: true, iVersion : ".$theSettings->iVersion.", version : '". $theSettings->version."', libVersion : '".$theSettings->libVersion."', apiVersion : ".$theSettings->apiVersion." };\n"; if($theSettings->mostOfMethodsRenamed) $jResult.="theWebUI.systemInfo.rTorrent.newMethodsSet = true;\n"; if($do_diagnostic) { $up = getUploadsPath(); $st = getSettingsPath(); @chmod($up,$profileMask); @chmod($st,$profileMask); @chmod('./test.sh',$profileMask & 0755); if(PHP_USE_GZIP && (findEXE('gzip')===false)) { @define('PHP_USE_GZIP', false); $jResult.="noty(theUILang.gzipNotFound,'error');"; } if(PHP_INT_SIZE<=4) { if(findEXE('stat')===false) $jResult.="noty(theUILang.statNotFoundW,'error');"; findRemoteEXE('stat',"noty(theUILang.statNotFound,'error');",$remoteRequests); } if(!@file_exists($up.'/.') || !is_readable($up) || !is_writable($up)) $jResult.="noty(theUILang.badUploadsPath+' (".$up.")','error');"; if(!@file_exists($st.'/.') || !is_readable($st) || !is_writable($st)) $jResult.="noty(theUILang.badSettingsPath+' (".$st.")','error');"; if(isLocalMode() && !$theSettings->idNotFound) { if($theSettings->uid<0) $jResult.="noty(theUILang.cantObtainUser,'error');"; else { if(!isUserHavePermission($theSettings->uid,$theSettings->gid,$tempDirectory,0x0007)) $jResult.="noty(theUILang.badTempPath2+' (".$tempDirectory.")','error');"; if(!isUserHavePermission($theSettings->uid,$theSettings->gid,$up,0x0007)) $jResult.="noty(theUILang.badUploadsPath2+' (".$up.")','error');"; if(!isUserHavePermission($theSettings->uid,$theSettings->gid,$st,0x0007)) $jResult.="noty(theUILang.badSettingsPath2+' (".$st.")','error');"; if(!isUserHavePermission($theSettings->uid,$theSettings->gid,'./test.sh',0x0005)) $jResult.="noty(theUILang.badTestPath+' (".realpath('./test.sh').")','error');"; } } if($theSettings->badXMLRPCVersion) $jResult.="noty(theUILang.badXMLRPCVersion,'error');"; } } $plg = getConfFile('plugins.ini'); if(!$plg) $plg = "../conf/plugins.ini"; $permissions = parse_ini_file($plg,true); $init = array(); $names = array(); $disabled = array(); $phpVersion = phpversion(); if( ($pos=strpos($phpVersion, '-'))!==false ) $phpVersion = substr($phpVersion,0,$pos); $phpIVersion = explode('.',$phpVersion); $phpIVersion = (intval($phpIVersion[0])<<16) + (intval($phpIVersion[1])<<8) + intval($phpIVersion[2]); $phpRequired = false; $userPermissions = array( "__hash__"=>"plugins.dat" ); $cache = new rCache(); $cache->get($userPermissions); $cantBeShutdowned = 0x0080; $canBeLaunched = 0x0100; $disabledByUser = 0x8000; $loadedExtensions = array_map("strtolower",get_loaded_extensions()); while(false !== ($file = readdir($handle))) { if($file != "." && $file != ".." && is_dir('../plugins/'.$file)) { if(!array_key_exists($file,$userPermissions)) $userPermissions[$file] = true; $info = getPluginInfo( $file, $permissions ); if($info) { if( $info["plugin.may_be_launched"] && getFlag($permissions,$file,"enabled")=="user-defined") { $info["perms"] |= $canBeLaunched; if(!$userPermissions[$file]) { $info["perms"] |= $disabledByUser; $disabled[$file] = $info; $info = false; } } else $info["perms"] |= $cantBeShutdowned; } if($info!==false) { if(!$theSettings->linkExist && $info["rtorrent.need"]) { $disabled[$file] = $info; continue; } if($info['php.version']>$phpIVersion) { $jResult.="noty('".$file.": '+theUILang.badPHPVersion+' '+'".$info['php.version.readable']."'+'.','error');"; $disabled[$file] = $info; continue; } $extError = false; foreach( $info['php.extensions.error'] as $extension ) if(!in_array( $extension, $loadedExtensions )) { $jResult.="noty('".$file.": '+theUILang.phpExtensionNotFoundError+' ('+'".$extension."'+').','error');"; $extError = true; } if($extError) { $disabled[$file] = $info; continue; } if(count($info['web.external.error']) || count($info['web.external.warning']) || count($info['rtorrent.external.error']) || count($info['rtorrent.external.warning'])) eval( getPluginConf( $file ) ); foreach( $info['web.external.error'] as $external ) { if(findEXE($external)==false) { $jResult.="noty('".$file.": '+theUILang.webExternalNotFoundError+' ('+'".$external."'+').','error');"; $extError = true; } else if($external=='php') $phpRequired = true; } if($extError) { $disabled[$file] = $info; continue; } if($theSettings->linkExist) { if($info['rtorrent.version']>$theSettings->iVersion) { $jResult.="noty('".$file.": '+theUILang.badrTorrentVersion+' '+'".$info['rtorrent.version.readable']."'+'.','error');"; $disabled[$file] = $info; continue; } foreach( $info['rtorrent.external.error'] as $external ) { findRemoteEXE($external,"noty('".$file.": '+theUILang.rTorrentExternalNotFoundError+' ('+'".$external."'+').','error'); thePlugins.get('".$file."').disable();",$remoteRequests); if($external=='php') $phpRequired = true; } foreach( $info['rtorrent.script.error'] as $external ) { $fname = $rootPath.'/plugins/'.$file.'/'.$external; @chmod($fname,$profileMask & 0755); if(!isUserHavePermission($theSettings->uid,$theSettings->gid,$fname,0x0005)) { $jResult.="noty('".$file.": '+theUILang.rTorrentBadScriptPath+' ('+'".$fname."'+').','error');"; $extError = true; } } if($extError) { $disabled[$file] = $info; continue; } foreach( $info['rtorrent.php.error'] as $external ) { $fname = $rootPath.'/plugins/'.$file.'/'.$external; @chmod($fname,$profileMask & 0644); if(!isUserHavePermission($theSettings->uid,$theSettings->gid,$fname,0x0004)) { $jResult.="noty('".$file.": '+theUILang.rTorrentBadPHPScriptPath+' ('+'".$fname."'+').','error');"; $extError = true; } } if($extError) { $disabled[$file] = $info; continue; } if(!isLocalMode()) { if($info["rtorrent.remote"]=="error") { $jResult.="noty('".$file.": '+theUILang.errMustBeInSomeHost,'error');"; $disabled[$file] = $info; continue; } if($do_diagnostic && ($info["rtorrent.remote"]=="warning")) $jResult.="noty('".$file.": '+theUILang.warnMustBeInSomeHost,'error');"; } } if($do_diagnostic) { if($theSettings->linkExist) foreach( $info['rtorrent.external.warning'] as $external ) findRemoteEXE($external,"noty('".$file.": '+theUILang.rTorrentExternalNotFoundWarning+' ('+'".$external."'+').','error');",$remoteRequests); foreach( $info['web.external.warning'] as $external ) if(findEXE($external)==false) $jResult.="noty('".$file.": '+theUILang.webExternalNotFoundWarning+' ('+'".$external."'+').','error');"; foreach( $info['php.extensions.warning'] as $extension ) if(!in_array( $extension, $loadedExtensions )) $jResult.="noty('".$file.": '+theUILang.phpExtensionNotFoundWarning+' ('+'".$extension."'+').','error');"; } $js = "../plugins/".$file."/init.js"; if(!is_readable($js)) $js = NULL; $php = "../plugins/".$file."/init.php"; if(!is_readable($php)) $php = NULL; $init[] = array( "js" => $js, "php" => $php, "info" => $info, "name" => $file ); $names[] = $file; } } } if($phpRequired) { $val = strtoupper(ini_get("register_argc_argv")); if( $val!=='' && $val!='ON' && $val!='1' && $val!='TRUE' ) $jResult.="noty(theUILang.phpParameterUnavailable,'error');"; } usort($init,"pluginsSort"); foreach($init as $plugin) { $jEnd = ''; $pInfo = $plugin["info"]; $deps = array_diff( $pInfo["plugin.dependencies"], $names ); if(count($deps)) { $jResult.="noty('".$plugin["name"].": '+theUILang.dependenceError+' ".implode(",",$deps)."','error');"; $disabled[$plugin["name"]] = $pInfo; continue; } $jResult.="(function () { var plugin = new rPlugin( '".$plugin["name"]."',".$pInfo["plugin.version"]. ",'".$pInfo["plugin.author"]."','".$pInfo["plugin.description"]."',".$pInfo["perms"].",'".$pInfo["plugin.help"]."' );\n"; if($plugin["php"]) require_once( $plugin["php"] ); else $theSettings->registerPlugin($plugin["name"],$pInfo["perms"]); if($plugin["js"]) { $js = file_get_contents($plugin["js"]); if($theSettings->isPluginRegistered($plugin["name"])) $jResult.=$js; else { if(strpos($js,"plugin.loadLang()")!==false) $jResult.="plugin.loadLang();"; } $jResult.="\n"; } $jResult.=$jEnd; $jResult.="\n})();"; } foreach($disabled as $name=>$pInfo) { $jResult.="(function () { var plugin = new rPlugin( '".$name."',".$pInfo["plugin.version"]. ",'".$pInfo["plugin.author"]."','".$pInfo["plugin.description"]."',".$pInfo["perms"].",'".$pInfo["plugin.help"]."' );\n"; $jResult.="plugin.disable(); "; if($pInfo["perms"] & $disabledByUser) $jResult.="plugin.unlaunch(); "; $jResult.="\n})();"; } $jResult.=testRemoteRequests($remoteRequests); $theSettings->store(); } closedir($handle); } cachedEcho($jResult,"application/javascript",true);
    [25.06.2014 18:37:23] Bad response from server: (200 [parsererror,getuisettings]) <?php require_once( 'util.php' ); $s = '{}'; $fname = getSettingsPath()."/uisettings.json"; $fo = fopen($fname, 'r'); if($fo!==false) { if(flock($fo, LOCK_SH)) { $s = @file_get_contents($fname); if($s==false) $s = '{}'; flock($fo, LOCK_UN); } fclose($fo); } cachedEcho($s,"application/json",true);
    For that log I believe I've a problem with permission, or rutorrent plugins.
    Here are my configuration files
    /etc/webapps/rutorrent/conf/config.php
    <?php
    // configuration parameters
    // for snoopy client
    @define('HTTP_USER_AGENT', 'Mozilla/5.0 (Windows NT 6.0; WOW64; rv:12.0) Gecko/20100101 Firefox/12.0', true);
    @define('HTTP_TIME_OUT', 30, true); // in seconds
    @define('HTTP_USE_GZIP', true, true);
    $httpIP = null; // IP string. Or null for any.
    @define('RPC_TIME_OUT', 5, true); // in seconds
    @define('LOG_RPC_CALLS', false, true);
    @define('LOG_RPC_FAULTS', true, true);
    // for php
    @define('PHP_USE_GZIP', false, true);
    @define('PHP_GZIP_LEVEL', 2, true);
    $schedule_rand = 10; // rand for schedulers start, +0..X seconds
    $do_diagnostic = true;
    $log_file = '/tmp/errors.log'; // path to log file (comment or leave blank to disable logging)
    $saveUploadedTorrents = true; // Save uploaded torrents to profile/torrents directory or not
    $overwriteUploadedTorrents = false; // Overwrite existing uploaded torrents in profile/torrents directory or make unique name
    $topDirectory = '/'; // Upper available directory. Absolute path with trail slash.
    $forbidUserSettings = false;
    $scgi_port = 5000;
    $scgi_host = "127.0.0.1";
    // For web->rtorrent link through unix domain socket
    // (scgi_local in rtorrent conf file), change variables
    // above to something like this:
    // $scgi_port = 0;
    // $scgi_host = "unix:///tmp/rpc.socket";
    $XMLRPCMountPoint = "/RPC2"; // DO NOT DELETE THIS LINE!!! DO NOT COMMENT THIS LINE!!!
    $pathToExternals = array(
    "php" => '/usr/bin/php', // Something like /usr/bin/php. If empty, will be found in PATH.
    "curl" => '/usr/bin/curl', // Something like /usr/bin/curl. If empty, will be found in PATH.
    "gzip" => '/usr/bin/gzip', // Something like /usr/bin/gzip. If empty, will be found in PATH.
    "id" => '/usr/bin/id', // Something like /usr/bin/id. If empty, will be found in PATH.
    "stat" => '/usr/bin/stat', // Something like /usr/bin/stat. If empty, will be found in PATH.
    $localhosts = array( // list of local interfaces
    "127.0.0.1",
    "localhost",
    $profilePath = '../share'; // Path to user profiles
    $profileMask = 0777; // Mask for files and directory creation in user profiles.
    // Both Webserver and rtorrent users must have read-write access to it.
    // For example, if Webserver and rtorrent users are in the same group then the value may be 0770.
    $tempDirectory = null; // Temp directory. Absolute path with trail slash. If null, then autodetect will be used.
    ~/.rtorrent.rc
    scgi_port = localhost:5000
    directory = /home/milo/Downloads
    session = /home/milo/.rutorrent/.session
    schedule = watch_directory,5,5,load_start=/home/milo/Downloads/*.torrent
    schedule = low_diskspace,5,60,close_low_diskspace=100M
    port_range = 49152-50000
    check_hash = no
    encryption = allow_incoming,try_outgoing,enable_retry
    dht = auto
    dht_port = 6881
    peer_exchange = yes
    /etc/php/php.ini
    [PHP]
    ; About php.ini ;
    ; PHP's initialization file, generally called php.ini, is responsible for
    ; configuring many of the aspects of PHP's behavior.
    ; PHP attempts to find and load this configuration from a number of locations.
    ; The following is a summary of its search order:
    ; 1. SAPI module specific location.
    ; 2. The PHPRC environment variable. (As of PHP 5.2.0)
    ; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
    ; 4. Current working directory (except CLI)
    ; 5. The web server's directory (for SAPI modules), or directory of PHP
    ; (otherwise in Windows)
    ; 6. The directory from the --with-config-file-path compile time option, or the
    ; Windows directory (C:\windows or C:\winnt)
    ; See the PHP docs for more specific information.
    ; http://php.net/configuration.file
    ; The syntax of the file is extremely simple. Whitespace and lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives following the section heading [PATH=/www/mysite] only
    ; apply to PHP files in the /www/mysite directory. Directives
    ; following the section heading [HOST=www.example.com] only apply to
    ; PHP files served from www.example.com. Directives set in these
    ; special sections cannot be overridden by user-defined INI files or
    ; at runtime. Currently, [PATH=] and [HOST=] sections only work under
    ; CGI/FastCGI.
    ; http://php.net/ini.sections
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; Directives are variables used to configure PHP or PHP extensions.
    ; There is no name validation. If PHP can't find an expected
    ; directive because it is not set or is mistyped, a default value will be used.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
    ; previously set variable or directive (e.g. ${foo})
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; ^ bitwise XOR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = None ; sets foo to an empty string
    ; foo = "None" ; sets foo to the string 'None'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; PHP comes packaged with two INI files. One that is recommended to be used
    ; in production environments and one that is recommended to be used in
    ; development environments.
    ; php.ini-production contains settings which hold security, performance and
    ; best practices at its core. But please be aware, these settings may break
    ; compatibility with older or less security conscience applications. We
    ; recommending using the production ini in production and testing environments.
    ; php.ini-development is very similar to its production variant, except it's
    ; much more verbose when it comes to errors. We recommending using the
    ; development version only in development environments as errors shown to
    ; application users can inadvertently leak otherwise secure information.
    ; This is php.ini-production INI file.
    ; Quick Reference ;
    ; The following are all the settings which are different in either the production
    ; or development versions of the INIs with respect to PHP's default behavior.
    ; Please see the actual settings later in the document for more details as to why
    ; we recommend these changes in PHP's behavior.
    ; display_errors
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; display_startup_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; error_reporting
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; html_errors
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; log_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; max_input_time
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; output_buffering
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; register_argc_argv
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; request_order
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; session.gc_divisor
    ; Default Value: 100
    ; Development Value: 1000
    ; Production Value: 1000
    ; session.hash_bits_per_character
    ; Default Value: 4
    ; Development Value: 5
    ; Production Value: 5
    ; short_open_tag
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; track_errors
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; url_rewriter.tags
    ; Default Value: "a=href,area=href,frame=src,form=,fieldset="
    ; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
    ; variables_order
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS"
    ; php.ini Options ;
    ; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
    ;user_ini.filename = ".user.ini"
    ; To disable this feature set this option to empty value
    ;user_ini.filename =
    ; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
    ;user_ini.cache_ttl = 300
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    ; http://php.net/engine
    engine = On
    ; This directive determines whether or not PHP will recognize code between
    ; <? and ?> tags as PHP source which should be processed as such. It is
    ; generally recommended that <?php and ?> should be used and that this feature
    ; should be disabled, as enabling it may result in issues when generating XML
    ; documents, however this remains supported for backward compatibility reasons.
    ; Note that this directive does not control the <?= shorthand tag, which can be
    ; used regardless of this directive.
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/short-open-tag
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    ; http://php.net/asp-tags
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    ; http://php.net/precision
    precision = 14
    ; Output buffering is a mechanism for controlling how much output data
    ; (excluding headers and cookies) PHP should keep internally before pushing that
    ; data to the client. If your application's output exceeds this setting, PHP
    ; will send that data in chunks of roughly the size you specify.
    ; Turning on this setting and managing its maximum buffer size can yield some
    ; interesting side-effects depending on your application and web server.
    ; You may be able to send headers and cookies after you've already sent output
    ; through print or echo. You also may see performance benefits if your server is
    ; emitting less packets due to buffered output versus PHP streaming the output
    ; as it gets it. On production servers, 4096 bytes is a good setting for performance
    ; reasons.
    ; Note: Output buffering can also be controlled via Output Buffering Control
    ; functions.
    ; Possible Values:
    ; On = Enabled and buffer is unlimited. (Use with caution)
    ; Off = Disabled
    ; Integer = Enables the buffer and sets its maximum size in bytes.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: Off
    ; Development Value: 4096
    ; Production Value: 4096
    ; http://php.net/output-buffering
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ; http://php.net/output-handler
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    ; http://php.net/zlib.output-compression
    zlib.output_compression = Off
    ; http://php.net/zlib.output-compression-level
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ; http://php.net/zlib.output-handler
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    ; http://php.net/implicit-flush
    ; Note: This directive is hardcoded to On for the CLI SAPI
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated. A warning appears if the specified function is
    ; not defined, or if the function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func =
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 17
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/open-basedir
    open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/:/etc/webapps/rutorrent/conf/:/usr/share/webapps/rutorrent/php/:/usr/share/webapps/rutorrent/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-functions
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    ; http://php.net/disable-classes
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ; http://php.net/syntax-highlighting
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long requests, which may end up
    ; being interrupted by the user or a browser timing out. PHP's default behavior
    ; is to disable this feature.
    ; http://php.net/ignore-user-abort
    ;ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; http://php.net/realpath-cache-size
    ;realpath_cache_size = 16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; http://php.net/realpath-cache-ttl
    ;realpath_cache_ttl = 120
    ; Enables or disables the circular reference collector.
    ; http://php.net/zend.enable-gc
    zend.enable_gc = On
    ; If enabled, scripts may be written in encodings that are incompatible with
    ; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
    ; encodings. To use this feature, mbstring extension must be enabled.
    ; Default: Off
    ;zend.multibyte = Off
    ; Allows to set the default encoding for the scripts. This value will be used
    ; unless "declare(encoding=...)" directive appears at the top of the script.
    ; Only affects if zend.multibyte is set.
    ; Default: ""
    ;zend.script_encoding =
    ; Miscellaneous ;
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    ; http://php.net/expose-php
    expose_php = On
    ; Resource Limits ;
    ; Maximum execution time of each script, in seconds
    ; http://php.net/max-execution-time
    ; Note: This directive is hardcoded to 0 for the CLI SAPI
    max_execution_time = 30
    ; Maximum amount of time each script may spend parsing request data. It's a good
    ; idea to limit this time on productions servers in order to eliminate unexpectedly
    ; long running scripts.
    ; Note: This directive is hardcoded to -1 for the CLI SAPI
    ; Default Value: -1 (Unlimited)
    ; Development Value: 60 (60 seconds)
    ; Production Value: 60 (60 seconds)
    ; http://php.net/max-input-time
    max_input_time = 60
    ; Maximum input variable nesting level
    ; http://php.net/max-input-nesting-level
    ;max_input_nesting_level = 64
    ; How many GET/POST/COOKIE input variables may be accepted
    ; max_input_vars = 1000
    ; Maximum amount of memory a script may consume (128MB)
    ; http://php.net/memory-limit
    memory_limit = 128M
    ; Error handling and logging ;
    ; This directive informs PHP of which errors, warnings and notices you would like
    ; it to take action for. The recommended way of setting values for this
    ; directive is through the use of the error level constants and bitwise
    ; operators. The error level constants are below here for convenience as well as
    ; some common settings and their meanings.
    ; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
    ; those related to E_NOTICE and E_STRICT, which together cover best practices and
    ; recommended coding standards in PHP. For performance reasons, this is the
    ; recommend error reporting setting. Your production server shouldn't be wasting
    ; resources complaining about best practices and coding standards. That's what
    ; development servers and development settings are for.
    ; Note: The php.ini-development file has this setting as E_ALL. This
    ; means it pretty much reports everything which is exactly what you want during
    ; development and early testing.
    ; Error Level Constants:
    ; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; E_DEPRECATED - warn about code that will not work in future versions
    ; of PHP
    ; E_USER_DEPRECATED - user-generated deprecation warnings
    ; Common Values:
    ; E_ALL (Show all errors, warnings and notices including coding standards.)
    ; E_ALL & ~E_NOTICE (Show all errors, except for notices)
    ; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
    ; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
    ; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
    ; Development Value: E_ALL
    ; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; http://php.net/error-reporting
    error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
    ; This directive controls whether or not and where PHP will output errors,
    ; notices and warnings too. Error output is very useful during development, but
    ; it could be very dangerous in production environments. Depending on the code
    ; which is triggering the error, sensitive information could potentially leak
    ; out of your application such as database usernames and passwords or worse.
    ; It's recommended that errors be logged on production servers rather than
    ; having the errors sent to STDOUT.
    ; Possible Values:
    ; Off = Do not display any errors
    ; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout = Display errors to STDOUT
    ; Default Value: On
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-errors
    display_errors = Off
    ; The display of errors which occur during PHP's startup sequence are handled
    ; separately from display_errors. PHP's default behavior is to suppress those
    ; errors from clients. Turning the display of startup errors on can be useful in
    ; debugging configuration problems. But, it's strongly recommended that you
    ; leave this setting off on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/display-startup-errors
    display_startup_errors = Off
    ; Besides displaying errors, PHP can also log errors to locations such as a
    ; server-specific log, STDERR, or a location specified by the error_log
    ; directive found below. While errors should not be displayed on productions
    ; servers they should still be monitored and logging is a great way to do that.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: On
    ; http://php.net/log-errors
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    ; http://php.net/log-errors-max-len
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line unless ignore_repeated_source is set true.
    ; http://php.net/ignore-repeated-errors
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ; http://php.net/ignore-repeated-source
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    ; http://php.net/report-memleaks
    report_memleaks = On
    ; This setting is on by default.
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean). Setting this value
    ; to On can assist in debugging and is appropriate for development servers. It should
    ; however be disabled on production servers.
    ; Default Value: Off
    ; Development Value: On
    ; Production Value: Off
    ; http://php.net/track-errors
    track_errors = Off
    ; Turn off normal error reporting and emit XML-RPC error XML
    ; http://php.net/xmlrpc-errors
    ;xmlrpc_errors = 0
    ; An XML-RPC faultCode
    ;xmlrpc_error_number = 0
    ; When PHP displays or logs an error, it has the capability of formatting the
    ; error message as HTML for easier reading. This directive controls whether
    ; the error message is formatted as HTML or not.
    ; Note: This directive is hardcoded to Off for the CLI SAPI
    ; Default Value: On
    ; Development Value: On
    ; Production value: On
    ; http://php.net/html-errors
    html_errors = On
    ; If html_errors is set to On *and* docref_root is not empty, then PHP
    ; produces clickable error messages that direct to a page describing the error
    ; or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://php.net/docs
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot. PHP's default behavior is to leave these settings empty, in which
    ; case no links to documentation are generated.
    ; Note: Never use this feature for production boxes.
    ; http://php.net/docref-root
    ; Examples
    ;docref_root = "/phpmanual/"
    ; http://php.net/docref-ext
    ;docref_ext = .html
    ; String to output before an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-prepend-string
    ; Example:
    ;error_prepend_string = "<span style='color: #ff0000'>"
    ; String to output after an error message. PHP's default behavior is to leave
    ; this setting blank.
    ; http://php.net/error-append-string
    ; Example:
    ;error_append_string = "</span>"
    ; Log errors to specified file. PHP's default behavior is to leave this value
    ; empty.
    ; http://php.net/error-log
    ; Example:
    ;error_log = php_errors.log
    ; Log errors to syslog (Event Log on Windows).
    ;error_log = syslog
    ;windows.show_crt_warning
    ; Default value: 0
    ; Development value: 0
    ; Production value: 0
    ; Data Handling ;
    ; The separator used in PHP generated URLs to separate arguments.
    ; PHP's default setting is "&".
    ; http://php.net/arg-separator.output
    ; Example:
    ;arg_separator.output = "&amp;"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; PHP's default setting is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ; http://php.net/arg-separator.input
    ; Example:
    ;arg_separator.input = ";&"
    ; This directive determines which super global arrays are registered when PHP
    ; starts up. G,P,C,E & S are abbreviations for the following respective super
    ; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
    ; paid for the registration of these arrays and because ENV is not as commonly
    ; used as the others, ENV is not recommended on productions servers. You
    ; can still get access to the environment variables through getenv() should you
    ; need to.
    ; Default Value: "EGPCS"
    ; Development Value: "GPCS"
    ; Production Value: "GPCS";
    ; http://php.net/variables-order
    variables_order = "GPCS"
    ; This directive determines which super global data (G,P,C,E & S) should
    ; be registered into the super global array REQUEST. If so, it also determines
    ; the order in which that data is registered. The values for this directive are
    ; specified in the same manner as the variables_order directive, EXCEPT one.
    ; Leaving this value empty will cause PHP to use the value set in the
    ; variables_order directive. It does not mean it will leave the super globals
    ; array REQUEST empty.
    ; Default Value: None
    ; Development Value: "GP"
    ; Production Value: "GP"
    ; http://php.net/request-order
    request_order = "GP"
    ; This directive determines whether PHP registers $argv & $argc each time it
    ; runs. $argv contains an array of all the arguments passed to PHP when a script
    ; is invoked. $argc contains an integer representing the number of arguments
    ; that were passed when the script was invoked. These arrays are extremely
    ; useful when running scripts from the command line. When this directive is
    ; enabled, registering these variables consumes CPU cycles and memory each time
    ; a script is executed. For performance reasons, this feature should be disabled
    ; on production servers.
    ; Note: This directive is hardcoded to On for the CLI SAPI
    ; Default Value: On
    ; Development Value: Off
    ; Production Value: Off
    ; http://php.net/register-argc-argv
    register_argc_argv = Off
    ; When enabled, the ENV, REQUEST and SERVER variables are created when they're
    ; first used (Just In Time) instead of when the script starts. If these
    ; variables are not used within a script, having this directive on will result
    ; in a performance gain. The PHP directive register_argc_argv must be disabled
    ; for this directive to have any affect.
    ; http://php.net/auto-globals-jit
    auto_globals_jit = On
    ; Whether PHP will read the POST data.
    ; This option is enabled by default.
    ; Most likely, you won't want to disable this option globally. It causes $_POST
    ; and $_FILES to always be empty; the only way you will be able to read the
    ; POST data will be through the php://input stream wrapper. This can be useful
    ; to proxy requests or to process the POST data in a memory efficient fashion.
    ; http://php.net/enable-post-data-reading
    ;enable_post_data_reading = Off
    ; Maximum size of POST data that PHP will accept.
    ; Its value may be 0 to disable the limit. It is ignored if POST data reading
    ; is disabled through enable_post_data_reading.
    ; http://php.net/post-max-size
    post_max_size = 8M
    ; Automatically add files before PHP document.
    ; http://php.net/auto-prepend-file
    auto_prepend_file =
    ; Automatically add files after PHP document.
    ; http://php.net/auto-append-file
    auto_append_file =
    ; By default, PHP will output a character encoding using
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    ; http://php.net/default-mimetype
    default_mimetype = "text/html"
    ; PHP's default character set is set to empty.
    ; http://php.net/default-charset
    ;default_charset = "UTF-8"
    ; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
    ; to disable this feature. If post reading is disabled through
    ; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
    ; http://php.net/always-populate-raw-post-data
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; Windows: "\path1;\path2"
    ;include_path = ".;c:\php\includes"
    ; PHP's default setting for include_path is ".;/path/to/php/pear"
    ; http://php.net/include-path
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    ; http://php.net/doc-root
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    ; http://php.net/user-dir
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    ; http://php.net/extension-dir
    extension_dir = "/usr/lib/php/modules/"
    ; On windows:
    ; extension_dir = "ext"
    ; Directory where the temporary files should be placed.
    ; Defaults to the system default (see sys_get_temp_dir)
    ; sys_temp_dir = "/tmp"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    ; http://php.net/enable-dl
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; http://php.net/cgi.force-redirect
    ;cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request. PHP's default behavior is to disable this feature.
    ;cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; http://php.net/cgi.redirect-status-env
    ;cgi.redirect_status_env =
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    ; http://php.net/cgi.fix-pathinfo
    ;cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; http://php.net/fastcgi.impersonate
    ;fastcgi.impersonate = 1
    ; Disable logging through FastCGI connection. PHP's default behavior is to enable
    ; this feature.
    ;fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ; http://php.net/cgi.rfc2616-headers
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    ; http://php.net/file-uploads
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ; http://php.net/upload-tmp-dir
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    ; http://php.net/upload-max-filesize
    upload_max_filesize = 2M
    ; Maximum number of files that can be uploaded via a single request
    max_file_uploads = 20
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-fopen
    allow_url_fopen = On
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    ; http://php.net/allow-url-include
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address). PHP's default setting
    ; for this is empty.
    ; http://php.net/from
    ;from="[email protected]"
    ; Define the User-Agent string. PHP's default setting for this is empty.
    ; http://php.net/user-agent
    ;user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    ; http://php.net/default-socket-timeout
    default_socket_timeout = 60
    ; If your scripts have to deal with files from Macintosh systems,
    ; or you are running on a Mac and need to deal with files from
    ; unix or win32 systems, setting this flag will cause PHP to
    ; automatically detect the EOL character in those files so that
    ; fgets() and file() will work regardless of the source of the file.
    ; http://php.net/auto-detect-line-endings
    ;auto_detect_line_endings = Off
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, on Windows:
    ; extension=msql.dll
    ; ... or under UNIX:
    ; extension=msql.so
    ; ... or with a path:
    ; extension=/path/to/extension/msql.so
    ; If you only provide the name of the extension, PHP will look for it in its
    ; default extension directory.
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    extension=curl.so
    ;extension=dba.so
    ;extension=enchant.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=gmp.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=intl.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mssql.so
    ;extension=mysqli.so
    ;extension=mysql.so
    ;extension=odbc.so
    ;zend_extension=opcache.so
    ;extension=openssl.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=phar.so
    ;extension=posix.so
    ;extension=pspell.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite3.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    ; Module Settings ;
    [CLI Server]
    ; Whether the CLI web server uses ANSI color coding in its terminal output.
    cli_server.color = On
    [Date]
    ; Defines the default timezone used by the date functions
    ; http://php.net/date.timezone
    ;date.timezone =
    ; http://php.net/date.default-latitude
    ;date.default_latitude = 31.7667
    ; http://php.net/date.default-longitude
    ;date.default_longitude = 35.2333
    ; http://php.net/date.sunrise-zenith
    ;date.sunrise_zenith = 90.583333
    ; http://php.net/date.sunset-zenith
    ;date.sunset_zenith = 90.583333
    [filter]
    ; http://php.net/filter.default
    ;filter.default = unsafe_raw
    ; http://php.net/filter.default-flags
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [intl]
    ;intl.default_locale =
    ; This directive allows you to produce PHP errors when some error
    ; happens within intl functions. The value is the level of the error produced.
    ; Default is 0, which does not produce any errors.
    ;intl.error_level = E_WARNING
    [sqlite]
    ; http://php.net/sqlite.assoc-case
    ;sqlite.assoc_case = 0
    [sqlite3]
    ;sqlite3.extension_dir =
    [Pcre]
    ;PCRE library backtracking limit.
    ; http://php.net/pcre.backtrack-limit
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ; http://php.net/pcre.recursion-limit
    ;pcre.recursion_limit=100000
    [Pdo]
    ; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
    ; http://php.net/pdo-odbc.connection-pooling
    ;pdo_odbc.connection_pooling=strict
    ;pdo_odbc.db2_instance_name
    [Pdo_mysql]
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/pdo_mysql.cache_size
    pdo_mysql.cache_size = 2000
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/pdo_mysql.default-socket
    pdo_mysql.default_socket=
    [Phar]
    ; http://php.net/phar.readonly
    ;phar.readonly = On
    ; http://php.net/phar.require-hash
    ;phar.require_hash = On
    ;phar.cache_list =
    [mail function]
    ; For Win32 only.
    ; http://php.net/smtp
    SMTP = localhost
    ; http://php.net/smtp-port
    smtp_port = 25
    ; For Win32 only.
    ; http://php.net/sendmail-from
    ;sendmail_from = [email protected]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ; http://php.net/sendmail-path
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    ; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
    mail.add_x_header = On
    ; The path to a log file that will log all mail() calls. Log entries include
    ; the full path of the script, line number, To address and headers.
    ;mail.log =
    ; Log mail to syslog (Event Log on Windows).
    ;mail.log = syslog
    [SQL]
    ; http://php.net/sql.safe-mode
    sql.safe_mode = Off
    [ODBC]
    ; http://php.net/odbc.default-db
    ;odbc.default_db = Not yet implemented
    ; http://php.net/odbc.default-user
    ;odbc.default_user = Not yet implemented
    ; http://php.net/odbc.default-pw
    ;odbc.default_pw = Not yet implemented
    ; Controls the ODBC cursor model.
    ; Default: SQL_CURSOR_STATIC (default).
    ;odbc.default_cursortype
    ; Allow or prevent persistent links.
    ; http://php.net/odbc.allow-persistent
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    ; http://php.net/odbc.check-persistent
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/odbc.max-persistent
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/odbc.max-links
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    ; http://php.net/odbc.defaultlrl
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of odbc.defaultlrl and odbc.defaultbinmode
    ; http://php.net/odbc.defaultbinmode
    odbc.defaultbinmode = 1
    ;birdstep.max_links = -1
    [Interbase]
    ; Allow or prevent persistent links.
    ibase.allow_persistent = 1
    ; Maximum number of persistent links. -1 means no limit.
    ibase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ibase.max_links = -1
    ; Default database name for ibase_connect().
    ;ibase.default_db =
    ; Default username for ibase_connect().
    ;ibase.default_user =
    ; Default password for ibase_connect().
    ;ibase.default_password =
    ; Default charset for ibase_connect().
    ;ibase.default_charset =
    ; Default timestamp format.
    ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
    ; Default date format.
    ibase.dateformat = "%Y-%m-%d"
    ; Default time format.
    ibase.timeformat = "%H:%M:%S"
    [MySQL]
    ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
    ; http://php.net/mysql.allow_local_infile
    mysql.allow_local_infile = On
    ; Allow or prevent persistent links.
    ; http://php.net/mysql.allow-persistent
    mysql.allow_persistent = On
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/mysql.cache_size
    mysql.cache_size = 2000
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/mysql.max-persistent
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ; http://php.net/mysql.max-links
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    ; http://php.net/mysql.default-port
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/mysql.default-socket
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysql.default-host
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysql.default-user
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    ; http://php.net/mysql.default-password
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    ; http://php.net/mysql.connect-timeout
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    ; http://php.net/mysql.trace-mode
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of persistent links. -1 means no limit.
    ; http://php.net/mysqli.max-persistent
    mysqli.max_persistent = -1
    ; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
    ; http://php.net/mysqli.allow_local_infile
    ;mysqli.allow_local_infile = On
    ; Allow or prevent persistent links.
    ; http://php.net/mysqli.allow-persistent
    mysqli.allow_persistent = On
    ; Maximum number of links. -1 means no limit.
    ; http://php.net/mysqli.max-links
    mysqli.max_links = -1
    ; If mysqlnd is used: Number of cache slots for the internal result set cache
    ; http://php.net/mysqli.cache_size
    mysqli.cache_size = 2000
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
    ; at MYSQL_PORT.
    ; http://php.net/mysqli.default-port
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    ; http://php.net/mysqli.default-socket
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysqli.default-host
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    ; http://php.net/mysqli.default-user
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    ; http://php.net/mysqli.default-pw
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mysqlnd]
    ; Enable / Disable collection of general statistics by mysqlnd which can be
    ; used to tune and monitor MySQL operations.
    ; http://php.net/mysqlnd.collect_statistics
    mysqlnd.collect_statistics = On
    ; Enable / Disable collection of memory usage statistics by mysqlnd which can be
    ; used to tune and monitor MySQL operations.
    ; http://php.net/mysqlnd.collect_memory_statistics
    mysqlnd.collect_memory_statistics = Off
    ; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
    ; http://php.net/mysqlnd.net_cmd_buffer_size
    ;mysqlnd.net_cmd_buffer_size = 2048
    ; Size of a pre-allocated buffer used for reading data sent by the server in
    ; bytes.
    ; http://php.net/mysqlnd.net_read_buffer_size
    ;mysqlnd.net_read_buffer_size = 32768
    [OCI8]
    ; Connection: Enables privileged connections using external
    ; credentials (OCI_SYSOPER, OCI_SYSDBA)
    ; http://php.net/oci8.privileged-connect
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ; http://php.net/oci8.max-persistent
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ; http://php.net/oci8.persistent-timeout
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ; http://php.net/oci8.ping-interval
    ;oci8.ping_interval = 60
    ; Connection: Set this to a user chosen connection class to be used
    ; for all pooled server requests with Oracle 11g Database Resident
    ; Connection Pooling (DRCP). To use DRCP, this value should be set to
    ; the same string for all web servers running the same application,
    ; the database pool must be configured, and the connection string must
    ; specify to use a pooled server.
    ;oci8.connection_class =
    ; High Availability: Using On lets PHP receive Fast Application
    ; Notification (FAN) events generated when a database node fails. The
    ; database must also be configured to post FAN events.
    ;oci8.events = Off
    ; Tuning: This option enables statement

  • Need help with overlapping divs!

    Hey everyone,
    I'm working on another website and I have come up against a common problem for newbie designers from what I hear, the dreaded overlapping div problem!  I have a 2 column fixed layout with a floating left div.  My left div has my nav bar and various images.  When my main content div has more content than the left floating div, the left div border does not reach the footer!  Until now, I have gotten by with just hitting return in my left column div until it reaches the footer.  I am sure it is not the right way to do it but it has worked so far.  The problem is, now one of the pages has the left column div overlapping onto the footer!  I did some reading and I am guessing it involves either the box properties or clear float which I am not too familiar with.
    Any advice would be stellar!  I know this is just another stumbling block to get over but I would feel so much better if I was doing it the right way. 
    Here are screens of my issue,
    And here is my code for the page in question.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <link rel="shortcut icon" href="http://www.xldesignsonline.com/fchi/favicon.ico">
    <title>Full Circle Home Inspections</title>
    <link href="_css/main.css" rel="stylesheet" type="text/css" /><!--[if IE 5]>
    <style type="text/css">
    /* place css box model fixes for IE 5* in this conditional comment */
    .twoColFixLtHdr #sidebar1 { width: 230px; }
    </style>
    <![endif]--><!--[if IE]>
    <style type="text/css">
    /* place css fixes for all versions of IE in this conditional comment */
    .twoColFixLtHdr #sidebar1 { padding-top: 30px; }
    .twoColFixLtHdr #mainContent { zoom: 1; }
    /* the above proprietary zoom property gives IE the hasLayout it needs to avoid several bugs */
    </style>
    <![endif]-->
    <style type="text/css">
    <!--
    body {
         background-color: #FFF;
    .paragraphLead {
         font-size: 110%;
         font-weight: bold;
    a:link {
         text-decoration: none;
         color: #CF0;
    a:visited {
         text-decoration: none;
    a:hover {
         text-decoration: none;
    a:active {
         text-decoration: none;
    #apDiv1 {
         position:absolute;
         width:236px;
         height:157px;
         z-index:1;
         left: 692px;
         top: 372px;
    #apDiv2 {
         position:absolute;
         width:200px;
         height:192px;
         z-index:2;
         left: 697px;
         top: 1443px;
    #apDiv3 {
         position:absolute;
         width:158px;
         height:204px;
         z-index:2;
         left: 643px;
         top: 1502px;
    -->
    </style>
    <script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
    </head>
    <body class="twoColFixLtHdr">
    <div id="container">
      <div id="header">
        <h1><!-- end #header -->
      </h1></div>
      <div id="sidebar1">
        <h3 align="center">
          <object id="FlashID" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="200" height="620">
            <param name="movie" value="_assets/menu.swf" />
            <param name="quality" value="high" />
            <param name="wmode" value="opaque" />
            <param name="swfversion" value="6.0.65.0" />
            <!-- This param tag prompts users with Flash Player 6.0 r65 and higher to download the latest version of Flash Player. Delete it if you don’t want users to see the prompt. -->
            <param name="expressinstall" value="Scripts/expressInstall.swf" />
            <!-- Next object tag is for non-IE browsers. So hide it from IE using IECC. -->
            <!--[if !IE]>-->
            <object type="application/x-shockwave-flash" data="_assets/menu.swf" width="200" height="620">
              <!--<![endif]-->
              <param name="quality" value="high" />
              <param name="wmode" value="opaque" />
              <param name="swfversion" value="6.0.65.0" />
              <param name="expressinstall" value="Scripts/expressInstall.swf" />
              <!-- The browser displays the following alternative content for users with Flash Player 6.0 and older. -->
              <div>
                <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
                <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" width="112" height="33" /></a></p>
              </div>
              <!--[if !IE]>-->
            </object>
            <!--<![endif]-->
          </object>
        </h3>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.nachi.org/"><img src="_images/interNACHI.png" alt="InterNACHI" width="190" height="164" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.nachi.org/education.htm"><img src="_images/education-seal-small.gif" alt="education seal" width="150" height="150" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.iac2.org/"><img src="_images/iac2-all.gif" width="174" height="126" alt="IAC" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.inspectopia.com/profile.b.507.r.16181.u.03bcfb.html"><img src="_images/logo_top.png" alt="Inspectopedia" width="190" height="45" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.energystar.gov/"><img src="_images/img_energy_star_partner.jpg" width="160" height="191" alt="Energy Star Partner" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://cjenterprises.myshaklee.com/us/en/welcome.html#"><img src="_images/Shaklee.gif" alt="Shaklee" width="119" height="160" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://activerain.com/"><img src="_images/ARLogoSmall.gif" alt="Active Rain" width="135" height="36" border="0" /></a></p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"><a href="http://www.insiderpages.com/b/15246780294"><img src="_images/insider_pages.gif" alt="Insider Pages" width="89" height="37" border="0" /></a></p>
    <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
        <p align="center"> </p>
      </div>
      <div id="mainContent">
        <h2>Radon Gas Inspection</h2>
        <div id="paragraphFloat">
          <h5>What Is Radon?</h5>
          <p> Radon is a cancer causing radioactive gas. You cannot see, smell or taste radon, but it may be a problem in your home. The Surgeon General has warned that radon is the second leading cause of lung cancer in the United States today. </p>
          <div id="apDiv1">
        <div align="center"><a href="http://www.epa.gov/radon/video/epa-epu.wmv"><img src="_images/psa_revised.jpg" alt="What Is Radon?" width="200" height="172" border="0" /></a></div></div></div>
        <p>If you smoke and your home has high radon levels, you're at high risk for developing lung cancer. Some scientific studies of radon exposure indicate that children may be more sensitive to radon. This may be due to their higher respiration rate and their rapidly dividing cells, which may be more vulnerable to radiation damage. </p>
    <p> </p>
        <h5>Why Is It Dangerous?</h5>
    <p> The U.S. Environmental Protection Agency (US EPA) and the Surgeon General's Office have estimated that as many as 20,000 lung cancer deaths are caused each year by radon. Radon is the second leading cause of lung cancer. Radon-induced lung cancer costs the United States over $2 billion dollars per year in both direct and indirect health care costs.</p>
    <p>According to the US EPA, nearly 1 in 3 homes checked in seven states and on three Indian lands had screening levels over 4 pCi/L, the EPA's recommended action level for radon exposure.</p>
    <p>The alpha radiation emitted by radon is the same alpha radiation emitted by other alpha generating radiation sources such as plutonium.</p>
    <p>A family whose home has radon levels of 4 pCi/l is exposed to approximately 35 times as much radiation as the Nuclear Regulatory Commission would allow if that family was standing next to the fence of a radioactive waste site. (25 mrem limit, 800 mrem exposure)</p>
    <p> At the 4 pCi/l EPA action guideline level, radon carries approximately 1000 times the risk of death as any other EPA carcinogen. It is important to note that the action level is not a safe level, as there are no &quot;safe&quot; levels of radon gas.</p>
    <p> </p>
    <h5>How Does It Get Into My Home?</h5>
    <p> Radon is a radioactive gas. It comes from the natural decay of uranium that is found in nearly all soils. It typically moves up through the ground to the air above and into your home through cracks and other holes in the foundation. Your home traps radon inside, where it can build up. Any home may have a radon problem. This means new and old homes, well-sealed and drafty homes, and homes with or without basements.</p>
    <p> Radon from soil gas is the main cause of radon problems. Sometimes radon enters the home through well water. In a small number of homes, the building materials can give off radon, too. However, building materials rarely cause radon problems by themselves.</p>
    <p><strong>Radon gets in through:</strong></p>
    <ul>
      <li>Cracks in solid floors
        <div id="apDiv3">
          <div align="center"><a href="http://www.fullcirclehomeinspections.com/_assets/CitizensGuideRadon.pdf"><img src="_images/citguidecoverradon.jpg" alt="Guide To Radon" width="154" height="200" border="0" /></a></div>
        </div>
      </li>
      <li>Construction joints</li>
      <li>Cracks in walls</li>
      <li>Gaps in suspended floors</li>
      <li>Gaps around service pipes</li>
      <li>Cavities inside walls</li>
      <li>Surrounding water supply</li>
    </ul>
    <p> </p>
    <h5>What Can I Do?</h5>
    <p> Radon is a national environmental health problem. Elevated radon levels have been discovered in every state. The US EPA estimates that as many as 8 million homes throughout the country have elevated levels of radon. Current state surveys show that 1 home in 5 has elevated radon levels.</p>
    <p> Testing is the only way to know your home's radon levels. There are no immediate symptoms that will alert you to the presence of radon. It typically takes years of exposure before any problems surface. </p>
    <p>Let <strong>Full Circle Home Inspections</strong> ensure your family and your home are protected and safe from radon exposure!</p>
    <p> </p>
    <h5>Radon Myths</h5>
    <p><strong><em>MYTH:</em> Scientists are not sure that radon really is a problem.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Although some scientists dispute the precise number of deaths due to radon, all the major health organizations (like the Centers for Disease Control and Prevention, the American Lung Association and the American Medical Association) agree with estimates that radon causes thousands of preventable lung cancer deaths every year. This is especially true among smokers, since the risk to smokers is much greater than to non-smokers.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Radon testing is difficult, time-consuming and expensive.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Radon testing is easy. You can test your home yourself or hire a qualified radon test company. Either approach takes only a small amount of time and effort.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Homes with radon problems can't be fixed.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> There are simple solutions to radon problems in homes. Hundreds of thousands of homeowners have already fixed radon problems in their homes. Most homes can be fixed for about the same cost as other common home repairs; check with one or more qualified mitigators. Call your <a href="http://www.epa.gov/radon/whereyoulive.html">state radon office</a> for help in identifying qualified mitigation contractors.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Radon affects only certain kinds of homes.</strong></p>
    <blockquote>
      <p><strong><em>FACT: </em></strong>House construction can affect radon levels. However, radon can be a problem in homes of all types: old homes, new homes, drafty homes, insulated homes, homes with basements, and homes without basements. Local geology, construction materials, and how the home was built are among the factors that can affect radon levels in homes.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Radon is only a problem in certain parts of the country.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> High radon levels have been found in every state. Radon problems do vary from area to area, but the only way to know your radon level is to test.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> A neighbor's test result is a good indication of whether your home has a problem.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> It's not. Radon levels can vary greatly from home to home. The only way to know if your home has a radon problem is to test it.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Everyone should test their water for radon.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Although radon gets into some homes through water, it is important to first test the air in the home for radon. If your water comes from a public water supply that uses ground water, call your water supplier. If high radon levels are found and the home has a private well, call the Safe Drinking Water Hotline at 1-800-426-4791 for information on testing your water.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> It's difficult to sell homes where radon problems have been discovered.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em></strong> Where radon problems have been fixed, home sales have not been blocked or frustrated. The added protection is some times a good selling point.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> I've lived in my home for so long, it doesn't make sense to take action now.</strong></p>
    <blockquote>
      <p><strong><em>FACT: </em></strong>You will reduce your risk of lung cancer when you reduce radon levels, even if you've lived with a radon problem for a long time.</p>
    </blockquote>
    <p><strong><em>MYTH:</em> Short-term tests can't be used for making a decision about whether to fix your home.</strong></p>
    <blockquote>
      <p><strong><em>FACT:</em> </strong>A short-term test, followed by a second short-term test* can be used to decide whether to fix your home. However, the closer the average of your two short-term tests is to 4 pCi/L, the less certain you can be about whether your year-round average is above or below that level. Keep in mind that radon levels below 4 pCi/L still pose some risk. Radon levels can be reduced in most homes to 2 pCi/L or below.</p>
      <p> </p>
      <p> </p>
      <p> </p>
      <p align="center"><img src="_images/CA-3.jpg" width="520" height="207" /></p>
    </blockquote>
      </div>
      <div id="footer">
        <p align="center"><strong>© 2009 XL Designs Online - All Rights Reserved </strong></p>
      </div>
    <!-- end #container --></div>
    <script type="text/javascript">
    <!--
    swfobject.registerObject("FlashID");
    //-->
    </script>
    </body>
    </html>
    And here is my CSS if needed,
    @charset "utf-8";
    body  {
         font: 100% Verdana, Arial, Helvetica, sans-serif;
         background: #666666;
         margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
         padding: 0;
         text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
         color: #000000;
    .twoColFixLtHdr #container {
         width: 950px; /* the auto margins (in conjunction with a width) center the page */
         border: 1px solid #000000;
         text-align: left; /* this overrides the text-align: center on the body element. */
         margin-top: 20px;
         margin-right: auto;
         margin-bottom: 20px;
         margin-left: auto;
         background-color: #557050;
    .twoColFixLtHdr #header {
         border-bottom: 1px solid #000000;
         height: 250px;
         background-color: #DDDDDD;
         padding-top: 0;
         padding-right: 10px;
         padding-bottom: 0;
         padding-left: 20px;
         background-image: url(../_images/homebanner1.png);
    .twoColFixLtHdr #header h1 {
         margin: 0; /* zeroing the margin of the last element in the #header div will avoid margin collapse - an unexplainable space between divs. If the div has a border around it, this is not necessary as that also avoids the margin collapse */
         padding: 20px 0; /* using padding instead of margin will allow you to keep the element away from the edges of the div */
         text-align: center;
         font-size: 48px;
         font-family: Tahoma, Geneva, sans-serif;
         color: #000;
    .twoColFixLtHdr #sidebar1 {
         float: left; /* since this element is floated, a width must be given */
         width: 200px;
         border-right: 1px solid #000000;
         background-color: #557050;
         padding-top: 0px;
         padding-right: 10px;
         padding-bottom: 15px;
         padding-left: 10px;
    .twoColFixLtHdr #mainContent {
         margin-top: 0;
         margin-right: 0;
         margin-bottom: 0;
         margin-left: 250px;
         padding-top: 0;
         padding-right: 20px;
         padding-bottom: 0;
         padding-left: 20px;
         text-align: left;
    .twoColFixLtHdr #mainContent h1 {
         font-size: 48px;
         font-family: "Arial Rounded MT Bold";
         font-weight: bold;
    .twoColFixLtHdr #mainContent h2 {
         font-family: "Arial Rounded MT Bold";
         font-size: 32px;
    .twoColFixLtHdr #mainContent h3 {
         font-family: Georgia, "Times New Roman", Times, serif;
         font-style: italic;
         color: #CF0;
         font-size: 125%;
    .twoColFixLtHdr #mainContent h5 {
         font-size: 120%;
    .twoColFixLtHdr #footer {
         padding: 20px 10px 20px 20px;
         border-top: 1px solid #000000;
         background-color: #A3A3A3;
         font-family: Arial, Helvetica, sans-serif;
    .twoColFixLtHdr #footer p {
         margin: 0; /* zeroing the margins of the first element in the footer will avoid the possibility of margin collapse - a space between divs */
         padding: 10px 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
    .fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
         float: right;
         margin-left: 8px;
    .fltlft { /* this class can be used to float an element left in your page */
         float: left;
         margin-right: 8px;
    .clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
         clear:both;
        height:0;
        font-size: 1px;
        line-height: 0px;
    #paragraphFloat {
         width: 350px;
    #paragraphFloat2 {
         width: 350px;
    Please if anyone knows what I'm doing wrong please please let me know!  Since I am learning, I really want to get main concepts like this down so I am not constantly doing things the hard way!  Thank you! 
    Jayson

    1) Regarding validation, what does it do?
    It validates by telling you where your code isn't er... valid.  Sometimes the results are a bit jumbled but if you work through them one at a time and revalidate, it's a good way to learn.  If you fix all of the errors shown up through the validator you should end up with standards compliant code.  Not necessarily the best, most efficient code you can write but at least it will be valid and it helps you spot errors that hours of code-staring never seems to find.
    I don't use the DW validation tool because I find the W3c one easier.
    The W3c validator has a check box of HTML Tidy which can tidy up your code but it's not always as easy to see what changes.
    2) I know the <p> tag for spacing is wrong, I could just feel it in my bones.  I just didn't know what else to do.  If I <br> all the way down won't the code be just as cluttered?
    You're obviously a born web coder!
    <br> will bloat your page if you use them to position elements.
    Here you need to get used to a) the Block Model and b) CSS positioning.  Once you crack these, CSS opens up for you and becomes a little more intuitive.
    if you have two elements on top of each other rather than push them apart with other elements you do it with padding and/or margin.  There are things to watch out for here namely, collapsing margins but if you start to read up on the above, you'll get it.
    I just thought of something.  If I add a div in main content, align it to the bottom center with CSS, use a line break between it and the text above, and add the image in question in the new div, will the spacing between the text and image work itself out?  I just really want to get out of the <p> bad habit.
    Keep thinking!  Web design is not like desktop publishing or print.  Elements on a HTML page don't behave like paragraphs on a page.  Once you begin to figure out why not it all gets a little easier.
    If you want an image at the bottom an element you put that at the end of the content in that element.  Then you need to ensure there is no margin, padding or border between the img element and the next element (your footer).  HTML elements come with some styling that is applied by default in the browser.  Many web developers include a rule like this:
    body {
    margin: 0;
    padding:0;
    This sets the margin and padding to zero of course and it's purpose is to override the defaults.  Some people advocate applying similar rules to all elements and if your interested try googling Eric Meyer who has written about it online.
    One of the key purposes of CSS is to take styling out of the page.  It's leaner, more efficient for the viewer and the coder and helps with site management.
    3) AP divs are weird, and I did only use as a last resort.
    See? You're a natural!
    The reason is I am confused by the float and clear float classes.  My left column is floated left and that element is what I was having problems understanding.  I tried to make new divs and float right but I screwed it all up.  I am sure I am just not applying the clear float in the right places.
    Getting the hang of floating is key to CSS positioning.  You use a float if you want two elements to sit side by side on the page.  It disrupts the "document flow."  Ordinarily HTML elements are rendered one after the other, on top of each other.  Floating an element takes it out of the document flow and allows other elements to occupy its space.  When you float an element it should always have a width.  If the element below it also has a width, that width has to be sufficiently narrow to allow it to occupy the space.  In short, floated elements can't be wider than their containing element.
    The clear property is used after a float to stop an element occupying the space left by a floated element.  It works but confuses the heck out of me!
    So that leads me to my final point.  I am a novice too!  I might have fluffed a few of the technical points above but it's pretty much there.
    Regards
    Martin

  • I need Help with a website I've created

    I need help with a website I've created (www.jonathanhazelwood.com/lighthouse) I created the folowing site with dreamweaver at my current resolution 1366 by 768. Looks great on my screen resolution but if it is viewed on other resolutions the menu moves and some of the text above and below. How can I keep all content centered and working like it does on 1366 by 768 on all resolutions. The htm to my site is below I started off with a blank template through dreamweaver CS5.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>The Lighthouse Church</title>
    <style type="text/css">
    <!--
    body {
        font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
        background: #42413C;
        margin: 0;
        padding: 0;
        color: #000;
        background-color: #000;
    /* ~~ Element/tag selectors ~~ */
    ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
        padding: 0;
        margin: 0;
    h1, h2, h3, h4, h5, h6, p {
        margin-top: 0;     /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
        padding-right: 15px;
        padding-left: 15px; /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
    a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
        border: none;
    /* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
    a:link {
        color: #42413C;
        text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
    a:visited {
        color: #6E6C64;
        text-decoration: underline;
    a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
        text-decoration: none;
    /* ~~ this fixed width container surrounds all other elements ~~ */
    .container {
        width: 960px;
        background: #FFF;
        margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
    /* ~~ This is the layout information. ~~
    1) Padding is only placed on the top and/or bottom of the div. The elements within this div have padding on their sides. This saves you from any "box model math". Keep in mind, if you add any side padding or border to the div itself, it will be added to the width you define to create the *total* width. You may also choose to remove the padding on the element in the div and place a second div within it with no width and the padding necessary for your design.
    .content {
        padding: 10px 0;
    /* ~~ miscellaneous float/clear classes ~~ */
    .fltrt {  /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
        float: right;
        margin-left: 8px;
    .fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
        float: left;
        margin-right: 8px;
    .clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the overflow:hidden on the .container is removed */
        clear:both;
        height:0;
        font-size: 1px;
        line-height: 0px;
    #apDiv1 {
        position:absolute;
        width:352px;
        height:2992px;
        z-index:1;
        top: 171px;
        left: 507px;
    #apDiv2 {
        position:absolute;
        width:961px;
        height:1399px;
        z-index:1;
        left: 187px;
        top: 1px;
    #apDiv3 {
        position:absolute;
        width:961px;
        height:1001px;
        z-index:1;
        top: -2px;
    #apDiv4 {
        position:absolute;
        width:963px;
        height:58px;
        z-index:1;
        left: 0px;
        top: 101px;
    #apDiv5 {
        position:absolute;
        width:961px;
        height:1505px;
        z-index:1;
        top: -5px;
    #apDiv6 {
        position:absolute;
        width:962px;
        height:150px;
        z-index:1;
        left: 0px;
        top: -1px;
    #apDiv7 {
        position:absolute;
        width:361px;
        height:25px;
        z-index:2;
        left: 35px;
        top: 1308px;
    #apDiv8 {
        position:absolute;
        width:320px;
        height:24px;
        z-index:2;
        left: 200px;
        top: 1479px;
    #apDiv9 {
        position:absolute;
        width:962px;
        height:63px;
        z-index:3;
        left: -10px;
        top: -1292px;
    #apDiv10 {
        position:absolute;
        width:270px;
        height:27px;
        z-index:2;
        left: 200px;
        top: 1478px;
    #apDiv11 {
        position:absolute;
        width:961px;
        height:44px;
        z-index:3;
        left: 195px;
        top: 183px;
    -->
    </style>
    <script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
    <link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
    <style type="text/css">
    #apDiv12 {
        position:absolute;
        width:295px;
        height:23px;
        z-index:4;
        left: 198px;
        top: 1px;
    #apDiv13 {
        position:absolute;
        width:135px;
        height:22px;
        z-index:5;
        left: 1001px;
        top: 3px;
    #apDiv14 {
        position:absolute;
        width:309px;
        height:992px;
        z-index:1;
        left: 33px;
        top: 479px;
    #apDiv15 {
        position:absolute;
        width:327px;
        height:999px;
        z-index:1;
        left: 324px;
    #apDiv16 {
        position:absolute;
        width:262px;
        height:1000px;
        z-index:2;
        left: 674px;
        top: 477px;
    #apDiv17 {
        position:absolute;
        width:85px;
        height:34px;
        z-index:1;
        left: -379px;
        top: 1001px;
    #apDiv18 {
        position:absolute;
        width:200px;
        height:115px;
        z-index:6;
    #apDiv19 {
        position:absolute;
        width:168px;
        height:31px;
        z-index:3;
        left: 448px;
        top: 1451px;
    #apDiv20 {
        position:absolute;
        width:94px;
        height:33px;
        z-index:3;
        left: 384px;
        top: 1477px;
    body {
        background-color: #000;
        margin-left: 0px;
        margin-right: 0px;
    #apDiv21 {
        position:absolute;
        width:920px;
        height:200px;
        z-index:4;
        left: 19px;
        top: 233px;
    </style>
    </head>
    <body>
    <div class="container">
      <div class="content">
        <div id="apDiv5">
          <div id="apDiv16">
            <div id="apDiv17">
              <map name="Map2" id="Map2">
                <area shape="rect" coords="4,2,77,28" href="http://www.myspace.com/lighthousechurch1" />
              </map>
              <img src="paypal-donate-button.png" width="83" height="33" border="0" usemap="#Map" />
              <map name="Map" id="Map">
                <area shape="rect" coords="2,2,80,30" href="https://www.paypal.com/us/cgi-bin/webscr?cmd=_flow&SESSION=HgApKd0bxyPQv1ixwBW3HgWXaLxPIiT Po9gSsRELLQp72IZ2-_8uvSmCLRO&dispatch=5885d80a13c0db1f8e263663d3faee8d9384d85353843a619606 282818e091d0" />
              </map>
            </div>
          </div>
          <div id="apDiv21">
            <blockquote>
              <blockquote>
                <blockquote>
                  <blockquote>
                    <blockquote>
                      <blockquote>
                        <p><img src="faithexplosion.png" width="314" height="225" /></p>
                      </blockquote>
                    </blockquote>
                  </blockquote>
                </blockquote>
              </blockquote>
            </blockquote>
          </div>
          <div id="apDiv14">
            <div id="apDiv15">
              <div>
                <div>
                  <p> Special Message from Perry Stone </p>
                  <h2> Was Jesus Born on December 25?</h2>
                  <p> 12/20/2010 </p>
                  <p><img alt="iStock_000003631829XSmall" src="http://www.voe.org/images/iStock_000003631829XSmall.jpg" width="300" height="234" /></p>
                  <p>Last   year, in response to the growing number of Christians who celebrate   Hanukkah but hate Christmas, I wrote an article for this website titled   &ldquo;Hanukkah or Christmas?&rdquo; I explained why I think Jesus was either   conceived or birthed on December 25.</p>
                </div>
              </div>
              <div>
                <div><a href="http://www.voe.org/Prophecy-Update/what-happened-to-global-warming.html"> READ MORE</a>
                  <p> Prophecy Update </p>
                  <h2> What Happened to Global Warming?</h2>
                  <p> 12/17/2010 </p>
                  <p> </p>
                </div>
              </div>
              <div>
                <div></div>
              </div>
              <div>
                <div></div>
              </div>
            </div>
            <div>
              <p><font size="2">Special Word</font></p>
              <p><font size="2">January 7th, 2011</font></p>
              <p> <font size="2">Dear Viewers:</font></p>
              <p><font size="2">We have now entered into one of the most trying times; but also one of the most glorious            times in church history.  Many things are coming upon the world and also upon the church and we (the church) must be totally            prepared to take up our cross daily and venture out into the lost and</font></p>
              <p>  <a href="http://sermon.lighthousechurchinc.org/2011/01/07/special-word-1711-evangelist-barbara-lync h.aspx" target="_parent">Click Here for More</a></p>
            </div>
            <p> </p>
            <div></div>
            <div>
            <!--//              weAddFlash("lhi09hdr.swf",800, 100,"true","true","high","showall","true","#ffffff");              //--></div>
            <div></div>
            <p> </p>
          </div>
          <img src="lighthousegraphic2.jpg" width="960" height="1509" />
          <div id="apDiv20"><img src="myspacebutton.jpg" width="89" height="30" border="0" usemap="#Map3" />
            <map name="Map3" id="Map3">
            <area shape="rect" coords="3,2,87,28" href="http://www.myspace.com/lighthousechurch1" />
          </map>
      </div>
        </div>
      <p> </p>
      </div>
    <!-- end .container --></div>
    <div id="apDiv10"><font size="1"><font color="#FFFFFF">Copyright 2011 The Lighthouse Church Inc.</font></font></div>
    <div id="apDiv11">
      <ul id="MenuBar1" class="MenuBarHorizontal">
        <li><a href="#">Home</a>    </li>
        <li><a href="#" class="MenuBarItemSubmenu">Our Pastor</a>
          <ul>
            <li><a href="#">Fresh Word</a></li>
            <li><a href="#">Itinerary</a></li>
            <li><a href="#">Prophetic Word</a></li>
            <li><a href="#">Sermons</a></li>
            <li><a href="#">Special Words</a></li>
            <li><a href="#">Word of Month</a></li>
          </ul>
        </li>
        <li><a href="#">Men Ministry</a></li>
        <li><a href="#" class="MenuBarItemSubmenu">Ministers</a>
          <ul>
            <li><a href="#">Chris Gore</a></li>
    </ul>
        </li>
        <li><a href="#" class="MenuBarItemSubmenu">Our Church</a>
          <ul>
            <li><a href="#">Contact Us</a></li>
            <li><a href="#">Donate</a></li>
            <li><a href="#">Events</a></li>
            <li><a href="#">Our Store</a></li>
            <li><a href="#">Prayer Request</a></li>
            <li><a href="#">Salvation</a></li>
            <li><a href="#">Subscribe</a></li>
            <li><a href="#">Vision</a></li>
            <li><a href="#">We Believe</a></li>
          </ul>
        </li>
        <li><a href="#" class="MenuBarItemSubmenu">Resources</a>
          <ul>
            <li><a href="#">Prepare for Disaster</a></li>
            <li><a href="#">How to Fast</a></li>
            <li><a href="#">Heaven &amp; Hell</a></li>
            <li><a href="#">Warfare Prayers</a></li>
            <li><a href="#">Wisdom Words</a></li>
          </ul>
        </li>
        <li><a href="#" class="MenuBarItemSubmenu">Prophetic</a>
          <ul>
            <li><a href="#">Article Archive</a></li>
            <li><a href="#">Audio Prophecies</a></li>
            <li><a href="#">Color for Year</a></li>
            <li><a href="#">Major Articles</a></li>
            <li><a href="#">Prophecy Archive</a></li>
            <li><a href="#">Prophetic Articles</a></li>
            <li><a href="#">Word for Year</a></li>
          </ul>
        </li>
      </ul>
    </div>
    <div id="apDiv12"><font size="1"><font color="#FFFFFF">6 South Railroad Ave Wyoming,DE 19934</font></font></div>
    <div id="apDiv13"><font size="1"><font color="#FFFFFF">Phone:(302) 697-1472</font></font></div>
    <script type="text/javascript">
    var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgDown:"SpryAssets/SpryMenuBarDownHover.gif", imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
    </script>
    </body>
    </html>

    Look at all the apdiv's you have.  Those are absolutely positioned layers.  I'm assuming by your post that you are very new to Dreamweaver and HTML and CSS.  I would highly recommend not using absolutely positioned layers until you have a better grasp on HTML and CSS.
    Looking at your code I would suggest that you consider using one of Dreamweaver's built in, or downloadable templates as a starting point and work from there. 
    http://www.adobe.com/devnet/dreamweaver/articles/dreamweaver_custom_templates.html

  • Need help with calculator project for an assignment...

    Hi all, I please need help with my calculator project that I have to do for an assignment.
    Here is the project's specifications that I need to do"
    """Create a console calculator applicaion that:
    * Takes one command line argument: your name and surname. When the
    program starts, display the date and time with a welcome message for the
    user.
    * Display all the available options to the user. Your calculator must include
    the arithmetic operations as well as at least five scientific operations of the
    Math class.
    -Your program must also have the ability to round a number and
    truncate it.
    -When you multiply by 2, you should not use the '*' operator to perform the
    operation.
    -Your program must also be able to reverse the sign of a number.
    * Include sufficient error checking in your program to ensure that the user
    only enters valid input. Make use of the String; Character, and other
    wrapper classes to help you.
    * Your program must be able to do conversions between decimal, octal and
    hex numbers.
    * Make use of a menu. You should give the user the option to end the
    program when entering a certain option.
    * When the program exits, display a message for the user, stating the
    current time, and calculate and display how long the user used your
    program.
    * Make use of helper classes where possible.
    * Use the SDK to run your program."""
    When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
    when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
    Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
    Here is the programs code that I've written so far:
    {code}
    import java.io.*;
    import java.util.*;
    import java.text.*;
    public class Project {
         private static String nameSurname = "";     
         private static String num1 = null;
         private static String num2 = null;
         private static String choice1 = null;
         private static double answer = 0;
         private static String more;
         public double Add() {
              answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
              return answer;
         public double Subtract() {
              answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
              return answer;
         public double Multiply() {
              answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
              return answer;
         public double Divide() {
              answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
              return answer;
         public double Modulus() {
              answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
              return answer;
         public double maximumValue() {
              answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
              return answer;
         public double minimumValue() {
              answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
              return answer;
         public double absoluteNumber1() {
              answer = (Math.abs(Double.parseDouble(num1)));
              return answer;
         public double absoluteNumber2() {
              answer = (Math.abs(Double.parseDouble(num2)));
              return answer;
         public double Squareroot1() {
              answer = (Math.sqrt(Double.parseDouble(num1)));
              return answer;
         public double Squareroot2() {
              answer = (Math.sqrt(Double.parseDouble(num2)));
              return answer;
         public static String octalEquivalent1() {
              int iNum1 = Integer.parseInt(num1);
    String octal1 = Integer.toOctalString(iNum1);
    return octal1;
         public static String octalEquivalent2() {
              int iNum2 = Integer.parseInt(num2);
              String octal2 = Integer.toOctalString(iNum2);
              return octal2;
         public static String hexadecimalEquivalent1() {
              int iNum1 = Integer.parseInt(num1);
              String hex1 = Integer.toHexString(iNum1);
              return hex1;
         public static String hexadecimalEquivalent2() {
              int iNum2 = Integer.parseInt(num2);
              String hex2 = Integer.toHexString(iNum2);
              return hex2;
         public double Round1() {
              answer = Math.round(Double.parseDouble(num1));
              return answer;
         public double Round2() {
              answer = Math.round(Double.parseDouble(num2));
              return answer;
              SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
         Date now = new Date();
         SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
         static Date timeIn = new Date();
         public static long programRuntime() {
              Date timeInD = timeIn;
              long timeOutD = System.currentTimeMillis();
              long msec = timeOutD - timeInD.getTime();
              float timeHours = msec / 1000;
                   return (long) timeHours;
         DecimalFormat decimals = new DecimalFormat("#0.00");
         public String insertNameAndSurname() throws IOException{
              boolean inputCorrect = false;
                   while (inputCorrect == false) {
                        while (nameSurname == null || nameSurname.length() == 0) {
                             for (int i = 0; i < nameSurname.length(); i++) {
                             if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
                                       inputCorrect = true;
                        else{
                        inputCorrect = false;
                        break;
                        try {
                             BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                             System.out.print("Please enter your name and surname: ");
                             nameSurname = inStream.readLine();
                             inputCorrect = true;
                        }catch (IOException ex) {
                             System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
                             inputCorrect = false;
                        System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
                        System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
                        return nameSurname;
              public String inputNumber1() throws IOException {
              boolean inputCorrect = false;
                   while (inputCorrect == false) {
                        try {
                             BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
                             System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
                             num1 = br.readLine();
                             double number1 = Double.parseDouble(num1);
                             System.out.println("\nThe number you have entered is: " + number1);
                             inputCorrect = true;
                        } catch (NumberFormatException nfe) {
                             System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
                             inputCorrect = false;
                        return num1;
         public String calculatorChoice() throws IOException {
              System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
              System.out.println("\n*********************************************");
              System.out.println("---------------------------------------------");
              System.out.println("Please select an option from the list below: ");
              System.out.println("---------------------------------------------");
              System.out.println("1 - Add");
              System.out.println("2 - Subtract");
              System.out.println("3 - Multiply");
              System.out.println("4 - Divide (remainder included)");
              System.out.println("5 - Maximum and minimum value of two numbers");
              System.out.println("6 - Squareroot");
              System.out.println("7 - Absolute value of numbers");
              System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
              System.out.println("9 - Round numbers");
              System.out.println("0 - Exit program");
              System.out.println("**********************************************");
              boolean inputCorrect = false;
                   while (inputCorrect == false) {
                        try {
                             BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
                             System.out.print("Please enter your option and hit <ENTER>: ");
                             choice1 = inStream.readLine();
                             int c1 = Integer.parseInt(choice1);
                             System.out.println("\nYou have entered choice number: " + c1);
                             inputCorrect = true;
                        } catch (NumberFormatException nfe) {
                             System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
                             inputCorrect = false;
                        return choice1;
         public String inputNumber2() throws IOException {
              boolean inputCorrect = false;
                   while (inputCorrect == false) {
                        try {
                             BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
                             System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
                             num2 = br2.readLine();
                             double n2 = Double.parseDouble(num2);
                             System.out.println("\nThe second number you have entered is: " + n2);
                             System.out.println("\nYour numbers are: " + num1 + " and " + num2);
                             inputCorrect = true;
                        } catch (NumberFormatException nfe) {
                             System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
                             inputCorrect = false;
                        return num2;
         public int Calculator() {
              int choice2 = (int) Double.parseDouble(choice1);
              switch (choice2) {
                        case 1 :
                             Add();
                             System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
                             break;
                        case 2 :
                             Subtract();
                             System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
                             break;
                        case 3 :
                             Multiply();
                             System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
                             break;
                        case 4 :
                             Divide();
                             System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
                             Modulus();
                             System.out.print(" and the remainder is " + decimals.format(answer));
                             break;
                        case 5 :
                             maximumValue();
                             System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                             minimumValue();
                             System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
                             break;
                        case 6 :
                             Squareroot1();
                             System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
                             Squareroot2();
                             System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
                             break;
                        case 7 :
                             absoluteNumber1();
                             System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
                             absoluteNumber2();
                             System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
                             break;
                        case 8 :
                             octalEquivalent1();
                             System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
                             octalEquivalent2();
                             System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
                             hexadecimalEquivalent1();
                             System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
                             hexadecimalEquivalent2();
                             System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
                             break;
                        case 9 :
                             Round1();
                             System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
                             Round2();
                             System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
                             break;
                        case 0 :
                             if (choice2 == 0) {
                                  System.exit(1);
                             break;
                   return choice2;
              public String anotherCalculation() throws IOException {
                   boolean inputCorrect = false;
                   while (inputCorrect == false) {
                             try {                              
                                  BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
                                  System.out.print("\nWould you like to do another calculation? Y/N ");
                                  more = br3.readLine();
                                  String s1 = "y";
                                  String s2 = "Y";
                                  if (more.equals(s1) || more.equals(s2)) {
                                       inputCorrect = true;
                                       while (inputCorrect = true){
                                            inputNumber1();
                                            System.out.println("");
                                            calculatorChoice();
                                            System.out.println("");
                                            inputNumber2();
                                            System.out.println("");
                                            Calculator();
                                            System.out.println("");
                                            anotherCalculation();
                                            System.out.println("");
                                            inputCorrect = true;
                                  } else {
                                       System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
                                       System.out.println("the program will now exit, Goodbye.");
                                       System.exit(0);
                             } catch (IOException ex){
                                  System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
                                  inputCorrect = false;
              return more;
         public static void main(String[] args) throws IOException {
              Project p1 = new Project();
              p1.insertNameAndSurname();
              System.out.println("");
              p1.inputNumber1();
              System.out.println("");
              p1.calculatorChoice();
              System.out.println("");
              p1.inputNumber2();
              System.out.println("");
              p1.Calculator();
                   System.out.println("");
                   p1.anotherCalculation();
                   System.out.println("");
    {code}
    *Can you please run my code for yourself and have a look at how this program is constructed*
    *and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
    Your help will be much appreciated.
    Thanks in advance

    Smirre wrote:
    Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
    What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
    AND you might want to ask yourself why the heck a calculator needs to know the users Name.

  • Need help with PS CS5 crashing while openinng specific document!

    Good morning all, I am the network admin at my company, and i have a user expereicneing a strange issue.  I do not know much about PS, other than how to install it, so i am at a loss to troublshoot this issue.  Any help would be greatly appreciated.
    Background: Computer is a Dell Precision 690 with 4GB RAM, running windows 7 pro x64 with SP1 (this was happening before SP1 was applied as well). Video card is nVidia Quadro NVS 285 .  I have fully updated and patched everything i can find, including using the most up to date, and "performance" drivers from nVidia (neither driver solved the problem) for the video card.  I could not find a partner certified driver for this partticular card.  The software is Photoshop CS5 version Version: 12.0.3 (12.0.3x20101211 [20101211.r.1222 2010/12/11:02:00:00 cutoff; r branch]) x64.
    I have another user, with the exact same computer, and exact same software (they were made form the same image) whom does not have this problem.
    The issue:  Basically, when opening this one particular image (from the users desktop) PS crashes and throws up the following error.  Sometimes it will actually display the image, then crash as soon as you try to even so much as click anywhere on the image.  Other times it conks out before the image is even displayed.
    Problem signature:
    Problem Event Name:     APPCRASH
    Application Name:     Photoshop.exe
    Application Version:     12.0.3.0
    Application Timestamp:     4d035d7d
    Fault Module Name:     CoolType.dll
    Fault Module Version:     5.7.83.10783
    Fault Module Timestamp:     4cab0d45
    Exception Code:     c0000005
    Exception Offset:     0000000000033a38
    OS Version:     6.1.7601.2.1.0.256.48
    Locale ID:     1033
    Additional Information 1:     3a1d
    Additional Information 2:     3a1d09b5925693dbcbec7b77fa814510
    Additional Information 3:     bce7
    Additional Information 4:     bce7b9096fa4d3e33239f38f9b4cacd0
    My user says there is nothing fancy or odd about this image, and the filesize wasn't any bigger than anything else he works on.  What really baffles me is that the other user with the same setup has no issue...  Thanks in advance!
    -Jim

    Since CoolType is implicated, it seems likely that user has installed a font that throws Photoshop for a loop.  The recourse in that case is to try to figure out which one it is and remove it from the system (and/or reinstall an un-corrupted copy of that font).
    Some tricks to try to figure out which font it is:
    1.  Look in the document that's failing to open with the other user's copy of Photoshop.  See what fonts are there.
    2.  Create a new document on the offending machine, invoke the Horizontal Type Tool, then open the font list.  You might find the list stops abruptly before the offending font.
    3.  Remove all fonts except the Windows standard ones, see if the problem goes away, then add them back piecemeal until the problem recurs.
    If the above doesn't get you success, another thing to think about when a problem is user-specific:   You might reset their Photoshop preferences to out-of-box defaults.  To do that you press and hold Control-Shift-Alt immediately after starting Photoshop from its menu entry or shortcut.  You have to be very quick, and if you do get its attention it will prompt and ask whether the preferences should be reset.  Keep in mind some Photoshop reconfiguration will need to happen after you do this, so it's not something to do lightly or you might get your users upset at you.
    Best of luck.
    -Noel

  • Help with Reconnecting Files

    Over this past weekend I was moving, via Relocate Masters, large numbers of images from managed status on my MacBook Pro to referenced status on an external drive (an Air Disk, to be precise). This had gone fine for thousands of images, but Sunday night I returned to the computer to find that it was completely locked up in mid-Relocate, and seemed to have been locked up for a while. I'm not sure what happened, but it seemed bad -- I couldn't get to the Force Quit dialog, or anywhere else. I powered down by holding in the power button.
    Upon resurrecting things, Aperture would not open the library. Long story shorter, I rebuilt the database and was then able to see the library contents again. But then I noticed that many files were "offline." Digging further, and using the Manage Referenced Files box, I discovered that some 3500 files need to be reconnected.
    The Reconnect All button did a little bit of magic for me, but now I've gotten to a point where using Reconnect All only reconnects one file at a time. I was renaming files as I Relocated Masters, and my fear is that this is what has caused the disconnect. *So first,* can anyone tell me that this is what has caused the problem (the problem being my apparent need to now reconnect 3400 files, one-by-one)?
    *Second, and more importantly to me, do I have any recourse beyond reconnecting one-by-one?* Again, the problem seems to me to be that the library file expects a file named image.jpg (or whatever), because the change of the file name to greatimage.jpg that occurred during Relocation did not get written to the library file.
    Many thanks for all help and suggestions.

    Homme dArs wrote:
    I hope someone else can join in with a definitive answer to your problem, but I don't believe you will be happy using the configuration you are attempting to set up.
    Having Aperture access your images via wireless is going to be very very slow, and any connection problems will be very frustrating. I have even abandoned the idea of using wireless backup of image files because it so slow.
    Perhaps someone can help with your immediate problem, but I would strongly suggest you find a way to store your referenced files locally (a firewire drive would be ideal).
    Thanks. I certainly appreciate your thought, and before trying it myself, my instinct was the same as yours. That said, until the present problem cropped up, I have to say it has been quite a good solution. My network is 802.11n, and I've noticed no real lag in accessing the files or otherwise using Aperture with a library stored as this is.
    But yes, I hope someone is able to help me get these 3400-some files reconnected short of one-by-one.
    Thank you for your comments.

  • Help with PAL settings for Sequence

    Hi –
    I’m having some issues with a PAL project and need some help with the right sequence settings. I have 3 camera angles that are all PAL that I am trying to edit together in a multi-clip sequence and everytime I add anything to the timeline I am getting the red render bar. I've tried all different PAL settings but nothing is working. Here are the specs of the DV clips:
    Frame Size : 720 X 576
    Vid Rate – 25 FPS
    Compressor DV-PAL
    Data Rate – 6.9mb/sec
    Pixel Aspect – PAL – CCIR-601
    Audio 48Khz
    Aud Format – 32bit – Floating Point.

    From the menu bar: Final Cut Pro > Easy Setup. What setting is selected there?
    From the menu bar: Sequence > Settings. What setting is selected there?
    In both cases they should be set to DV PAL.

  • Need help with effect / function stop!

    Hi all!
    I tried to build some kind of custom pop-up-menu with fade
    in/out effect, however the menu sometimes (< very often, but not
    always) disappears while the mouse is still over it.
    So i defined a function to stop/abort the effects, but this
    doesn't work right.
    Could anybody please tell me, how to stop all functions,
    while the mouse is over a link?
    /// This is the container to appear / disappear:
    <div id="navislide" style="height:292px;
    overflow:hidden;">
    <a href="mylink.html" onMouseOver="killall();"
    onMouseOut="hideit();">mylink</a>
    </div>
    /// This is the link to show the container:
    <a href="#"
    onMouseOver="slidefadein.start();">mylink</a>
    <script type="text/javascript">
    function displayblock() {
    var thediv = document.getElementById('navislide');
    thediv.style.display= "block";
    slidetimer = setTimeout('slidefadeout.start();', 2000);
    hideit = function() {
    slidetimer = setTimeout('slidefadeout.start();', 2000);
    function displaynone() {
    var thediv = document.getElementById('navislide');
    thediv.style.display= "none";
    killall = function() {
    clearTimeout(slidetimer);
    slidefadeout.stop();
    slidefadein.stop();
    displayblock();
    slidefadeup.start();
    var slidefadein = new Spry.Effect.Fade("navislide", {from:0,
    to:100, toggle:false, setup:displayblock, finish:hideit});
    var slidefadeout = new Spry.Effect.Fade("navislide",
    {from:100, to:0, toggle:false, finish:displaynone});
    var slidefadeup = new Spry.Effect.Fade("navislide",
    {from:100, to:100, toggle:false});
    </script>
    Probably, its all about the "killall"-function, because when
    the mouse moves over the link, the function to abort all other
    effects, does not take effect.
    Thank you so much vor any kind of help or hint!!
    Cheers,
    idefix

    I would be most interested in a reply to this for I asked
    weeks ago how to use an onClick stop() function for the links in my
    page. I was given the stop function by VFusion (it is to stop
    panels from rotating), but I could never figure out how to actually
    get the function to stop the panels and could not get it no matter
    what I tried, eventually had to take the panel rotation out.

  • Need Help with a Flash Web Project

    Hello, everyone. I am trying to use Flash to make a two-step
    system. I want the flash document to, first, allow a person to
    upload multiple image files and then, second, for the flash
    document be able to create a slideshow with the uploaded images and
    fade in and out from each image until the slideshow is over. I want
    it to be where the flash document creates its own slideshow with
    the images that are uploaded in the first step that I mentioned. I
    want it to do it completely on its own so I need to know how to
    give it the proper AI so that it can do this task.
    So, are there any tips that anyone has on how to do this? Can
    anyone tell me exactly how to do this? I really need help with this
    for my new website project. Thanks in advance, everyone!

    The problem with the text not appearing at all has to do with you setting the alpha of the movieclip to 0%.  Not within the movieclip, but the movieclip itself.  The same for the xray graphic, except you have that as a graphic symbol rather than a movieclip.  To have that play while inhabiting one frame you'll need to change it to a movieclip symbol.
    To get the text to play after the blinds (just a minor critique, I'd speed up the blinds), you will want to add some code in the frame where you added the stop in the blinds animation.  You will also need to assign instance names for the text movieclips in the properties panel, as well as place a stop(); in their first frames (inside).
    Let's say you name them upperText and lowerText.  Then the code you'd add at the end of the blinds animation (in the stop frame) would be...
    _parent.upperText.play();
    _parent.lowerText.play();
    The "_parent" portion of that is used to target the timeline that is containing the item making the command, basically meaning it's the guy inside the blinds telling the guy outside the blinds to do something.
    You'll probably want to add stops to the ends of the text animations as well.
    If you want to have the first text trigger the second text, then you'd take that second line above and place it in the last frame of the first text animation instead of the blinds animation.
    Note, on occasion, undeterminably, that code above doesn't work for some odd reason... the animation plays to the next frame and stops... so if you run into that, just put a play(); in the second frame to help push it along.
    PS GotoandPlay would actually be gotoAndPlay, and for the code above you could substitute play(); with gotoAndPlay(2);

  • Help with systemd problems/reply to closed thread

    @Everyone; as the previopus topic was closed, I am opening a new one here, partly to reply to some things that was said to me in the previous thread/topic (and I do not like to leave people hanging), but mainly to try and get some help with my systemd config (that I was not able to find help with in the wiki or manpages).
    @czubek; eww, that sounds rather similiar to some other operating systems I've heard of (not just, but obviously including, windows)... For me, subjectively, that is not very attractive, as being able to have a single application do a single thing, and then mixing and matching as I personally see fit is a great thing.
    @tomegun: I can indeed see your point, but if I made direct quotes on all the things I reply too, my posts would reach biblical proportions.
    Mmm-hmm, I do indeed know of "the Arch Way"; however, the system that you expose can be of varying complexity as well, and I found that the system that was presented to me by way of Sysvinit/initscripts was a way simpler system than that presented to me by systemd.
    Indeed, and I do like that; I enjoy knowing how my system works and learning more about it; however, the truth is that reading manpages and the wiki isn't always enough. And I use the numbers instead of letters in certain places as a jest, please, do not get offended by that; if you have to, get offended by my opinions.
    Ah, I have now scanned the wiki, the manpages, and have already faced problems. While part of me is saddened by this fact (as I was hoping for a smooth transition to systemd), part of me is glad that I can at least prove that everything isn't quite as simple as some people would make it out to be. More on this later in this post, as I do need help with the problems I have faced.
    And I wouldn't say that the new and old way are equally trivial, as I immediatley faced problems with "the new way". More on this later.
    Ok, I find that if the debate is polarized, then there is nothing wrong with describing it as such. I spell what I see.
    Oh my... Ignored as a matter of principle? I would say that that is an excellent way to stagnate; by that logic, moviemakers, gamemakers etcetera should ignore any and all criticism they recieve, as the critics are not contributing.... Wouldn't that lead to a complete halt in development? Isn't criticism (so long as it is constructive, obviously) a key component of (media/software) evolution?
    Ah, I see, then I  misunderstood the current state of the install media
    "Some adjustements"... Well, I guess we'll have to see how that goes, then. Hopefully it'll be smooth.
    @Everyone; Awebb possesses stunning accuracy as far as his observations go.
    @zb3; My point exactly.
    @tomegun; I believe you to be wrong; complaining (but not whining) is the first step towards improvement, as I think that I and zb3 has shown.
    Further, your last point (where you talk about "deep understanding of Y" and whatnot) is basically saying that only devs and programmers can contribute, so zb3's observation would be correct.
    Also, making suggestions is part of constructive criticism; you can do that even if you can't code, e.g. by saying "X works badly because it makes Y crash; couldn't we replace X with something akin to Z?". This is a valid point even if you have no intricate understanding of X, Y or Z, and if it is impossible to replace X for one reason or the other, it's not hard to reply with "Replacing X is impossible because of reason Q", and then see if someone can solve reason Q etcetera.
    zb3's example is obviously helping; for one, it would allow people to know taht they can't boot with systemd in certain cases, or that installing/runing systemd can break their system. I would consider that rather important information.
    @Everyone; Now then, to see if I can (or rather, if I can get help to) shed some light on some problems I've been having.
    My transition to systemd went pretty smooth (besides the fact that I couldn't use 'systemctl' to set anything, and neither duckduckgo nor any posts in the forums could help me (the error I continously got was "Failed to issue method call: Launch helper exited with unknown return code 1") and that there are no manpages/tips on how to configure the files for "localtime" and "adjtime", which would've been good considering some syntax have changed) to about halfway through, to the point where I was supposed to start using systemd for my daemons.
    Now then, to the main problem; first, I tried running
    "systemctl enable syslog-ng.service"
    and got the following message;
    "ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
    ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
    Since it doesn't exclusively say that something went wrong (at least as far as I can understand), I pondered the message a bit, but moved on to try and start dbus by issuing
    "systemctl enable dbus.service",
    to which I got the reply
    "The unit files have no [Install] section. They are not meant to be enabled using systemctl."
    This I can only assume is an error message of some sort, especially seeing as it says "not meant to be enabled using systemctl", but the wiki rather explicitly states that that is what I am supposed to do.
    I dare not move on (or attempt to start other daemons) without further advice, as I fear I might break my system. Any ideas as to how to solve this would be greatly appreciated.

    tcmdvm wrote:
    The message;
    "ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/syslog.service'
    ln -s '/usr/lib/systemd/system/syslog-ng.service' '/etc/systemd/system/multi-user.target.wants/syslog-ng.service'"
    indicates that running "systemctl enable syslog.service" is now enabled.
    If you try running sytemtctl enable <whatever>.service and get
    "The unit files have no [Install] section. They are not meant to be enabled using systemctl." means there is no <whatever>.service file available to enable.
    The dbus.service as far as I know is already enabled when installing systemd and doesn't require any action.
    Ah, right, systemd is chatty (I'm of the old skool; if nothing is/goes wrong, a program should keep quiet).
    Oh ok, then I should dare more on.
    ZekeSulastin wrote:To be a bit more precise, it means the service is there but it's only used as a dependency for something else; the [Install] section of the file is what tells systemctl where to link it and such.  Also, where exactly in the wiki were you told explicitly to 'systemctl enable dbus.service'?  I can easily point you to the sections in both installation guides that tell you how to set things like /etc/localtime et. al (also `man 7 archlinux`), but not the one that said to manually enable dbus.
    Ah, I see; and well, I was told right here, going from the top, to "Enable Daemons formerly listed in rc.conf [...] For a translation of the daemons from /etc/rc.conf to systemd services, see: List of Daemons and Services.", and, using the list, dbus is mentioned there, as you can see. Since I started from the top, I did not know that you didn't need to enable that service. Perhaps it could be added to the descriptions of the relevant services in the Wiki which ones are autostarted?
    ZekeSulastin wrote:Lastly, I don't think trying to continue conversations from a closed thread is a very good idea, let alone doing it in a giant undivided wall of text that makes it quite difficult to pick out much any single topic.
    Meh, I directly refer to the relevant people, they can easily see their own old posts in the previous thread, etcetera... I think te ones who have something to say will be able to find my replies to their previous statements (or so I hope). For now, as everyone can see, I quote stuff (but man might I make some huge posts if I ever post again in the future, if I quote what I reply to).
    fsckd wrote:This is not really a technical support subforum. Moving from Arch Discussion to Newbie Corner.
    Ah ok, thanks (or perhaps a cautious thanks? Moving it to "newbie corner" might, after all, be a subtle insult...).
    tomegun wrote:It is not really possible to follow your message as you don't quote what you are replying to. Moreover, as the thread was closed I think that means we should stop the discussion ;-)
    Hmm, I think it means cop-out for lack or proper arguments/responses... But ok, I'll let it slide, for now (mainly as I can't do much else).
    tomegun wrote:You are not meant to enable dbus.service as it is enabled unconditionally. To check the enabled/disabled state of your services try "systemctl list-unit-files". "static" means that you are not supposed to enabled/disable it.
    Ah ok, thank you. Now, having abandoned all hope, I'll start configuring again and see how it goes... May the void protect me. If I die, grieve not for me, but remember me in the fight against hard-to-configure applications.
    (edit/addon)
    Actually, what am I supposed to do with "hwclock"? the List of Daemons only says that I shouldn't run that in tandem with ntpd, but I'm not running ntpd, so... How do I get hwclock with systemd?
    Edited for additional question.
    Last edited by incassum (2012-11-07 08:44:42)

Maybe you are looking for