FLV -- new troubleshooting doc

There have been many, many posts about problems with displaying FLV files. We've just updated the CS4 documentation to include a new troubleshooting section that might help a lot of you who are having problems. As this is a much-talked-about issue, please publicize this troubleshooting information as much as possible on other blogs and forums if you're able to do that.
Here is a link to the new FLV troubleshooting section in Dreamweaver CS4 Help:
http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WSc78c5058ca073340dcda9110b1f693f21-7c9 ea.html#WS42d4a1c0291fbe4e-3262ef8e1232fbff0d3-8000
Special thanks to David Powers who originally alerted us to the need for such a doc.
The doc does not and cannot cover all issues. There are still many users for whom this doc won't provide a solution. But hopefully, the information provided will be able to help a good majority of people having trouble with FLV.
Thanks everyone!
Jon

Sure, feel free to add WIKI pages. I guess the best place for that would be the ES WIKI.
The troubleshooting and solutions that I added here focused solely on VC, but as it's a WIKI, anybody with troubleshooting solutions can create entries.

Similar Messages

  • How can I transfer text and format from a Word Doc to a new Pages Doc?

    How can I transfer text and format from a Word Doc to a new Pages Doc?

    Select, and Copy in the Word doc and Paste in the Pages doc. It may not be perfect. Importing (Opening) the Word doc is probably better than using Copy/Paste for large amounts of content.
    Jerry

  • Activating New GL & Doc Splitting

    Hi
    Can anyone suggest me a solution:
    We are working in ECC 6.0, New GL & Doc Splitting is not acvtivated. We are already in Production, can I activate it now, if not what is the procedure. We are just 3 months after live.
    SAP suggests a migration procedure, I could not understand.
    Can anyone explain
    thanks

    Hello,
    Note 891144 describes the risks of activating doc-split subsequently.
    Activating doc-split after going live is not allowed at the moment. There are some tables that are updated only under active doc-split. These tables can not be subsequently updated with exisiting documents, and business processes like clearing, VAT report, FC valuation etc.. could end up with error. 
    SAP dev. is currently testing a tool to cater this situation so that exisiting documents can be updated in necessary doc-split related tables. However the tool is not released for general use yet and this "migration" will probably be carried out on project basis only with support from SAP. Please keep an eye on note 1070629 as well as [http://service.sap.com/GLMIG|http://service.sap.com/GLMIG].
    The same can be said for NewGL as NewGL related tables must be updated with exisiting data.
    NewGL migration service SAP offers at the moment is for a specific scenario - system upgrade from older release (classical GL used) to new release ECC5.0 or 6.0 with NewGL.
    Kyoko
    Edited by: Kyoko Ushiki on Jan 17, 2008 8:36 AM

  • PO line item copy to new PO doc.

    Hi , one question PO line item copy to new PO doc.
    if i made on PO docuemnt as bleow
    10  Item1    20unit
    20  Item2    10 unit
    30   Intem3   20 Uni
    and when I need to create new PO , if i wanna creat PO inclue only line time 10 ,20
    how can i do it? could you pls kinldy adivse?
    just copy POC totlay to new PO is very easy.. I already know that..

    Hello.
    thanks so much for your answer.
    I tried to create new PO as you told, but I failed again.
    I could copy only one item into new PO document   ( there are serveral item (material item , comsumer itme , )
    but only material item copied to new PO (select item and adopt)
    Could you pls kindly adivse?
    I would like to copy several items from the old PO document and pastes those items on one new PO document
    Step 1 - Type ME21N - Create Purchase order
    Step 2 - Select PO document type, Vendor & PO date.
    =================================================== ( by step 2 , this is just create new PO===
    Step 3 - Click Document Overview button and open new window menu in PO screen left side
    (Do you mean just clike Document overview? in the left screen? )
    Answer : Yes, click on the Document Overview ON button and then open left side one small window.
    Step 4 - Click Selection Variant button in the left side window menu and then select Purchase Order option.
    (do you mean just select "my purchase order" button i the selection options?)
    Answer : No, click on the 'Purchase Order' first option.
    Step 5 - Now next screen open and give OLD Purchase Order document number in Purchasing Document ______ input field &
    other input data filed is empty.
    ( I dont understand exactly what you mean, what's next screen? do mean open new session? or
    just select old PO document via document overview window in the left side? )
    Answer : Yes, after click 'Purchase Order' first option, it will open new session screen and on the screen input option is 'Purchasing Document ___________ . Here, you will give copy of the old PO number remaining input options data are empty.
    Step 6 - Now Execute the screen and shown old PO number 3 times shown (10,20,30)
    (What exactly do you mean? do you mean just click old PO number shown on the document overview? )
    Answer : Yes, after execute the old PO number shown on the document overview screen.
    ( we can do if there is still PO number in the left pane , just clicking po number )
    Step 7 - In the OLD PO first 2 line items are to be create new PO, Select 1st line using mouse and then adopt button click
    (Selection variant next button), 2nd line select & adopted to new purchase order line item from old PO line item 10 & 20 copied.
    (I wonder this answer , I followed as your instuction same way.. select itme 10 and adopt , and select item 20 and adopt
    and in the new PO document just click adopt , in that case, only one item copied..
    Could you pls make clear it? )
    Step 8 - Click Document overview button, the left side window menu closed.
    Step 9 - Adopted 2 line item rate, qty and tax details to be provide and then SAVE as new Purchase Order.
    Hello, my answer provided for you question. Now, you are clear and resolved of old PO to new PO for the particular line items.
    Regards,
    K.Rajendran
    Edited by: SAP toddler on May 14, 2011 9:50 AM

  • Stream FLVs - new setup

    Hi folks. Very new to the Flash Media Server. Have 2.0.3
    installed on a W2k3 box. Pretty much spent all day looking for
    documentation to help me stream .flvs. I though the docs for CF
    were bad. :(
    I have no problem with the concept of getting a action script
    to call the server. However, everytime I try calling the server it
    tells me that the application isn't setup. So I go searching
    through the PDF that came with the install of the server, and it
    doesn't really talk about creating applications other than to click
    the button in the administrator to add a new instance. When I do
    that, nothing happens.
    Can anyone point me to the next step to do after the server
    is installed and is up and running?
    Also, I don't want this server to be an edge server. However,
    it seems to think it is one (maybe this is normal?). All the
    activity is going on in my edge.00.log files.
    Some of this is vague, I know, but I'm at a loss as to where
    to go next (short of calling support) to get this server up and
    running.

    I am sorry to hear you don't like our documentation. I may be
    a bit biased
    but I actually think the documentation is pretty
    good. Please do me a favor and give it a second chance.
    I suggest to start with flashmediaserver_developing.pdf (in
    your documentation subdirectory of the FMS root) - it gets
    interesting on page 14 et sqq.
    In short, this is what you have to do:
    - create a subdirectory in [FMS_ROOT]\applications
    the name of the directory is the name of your application.
    Let's call it "foo":
    [FMS_ROOT]\applications\foo
    - this is where your server side scripts go to
    - if you want to stream FLVs and MP3s, you need a directory
    called "streams":
    [FMS_ROOT]\applications\foo\streams
    - Now the media content needs to sit in an application
    instance. You may put this into the default instance:
    [FMS_ROOT]\applications\foo\streams\_definst_ (please create
    it - it won't be created automatically)
    or create another instance:
    [FMS_ROOT]\applications\foo\streams\bar
    - When you code your client, you need to make a netconnection
    to:
    rtmp://yourfmshost/yourapplication/yourinstance
    please note that the streams directory does not show up here
    In our case it's:
    rtmp://yourfmshost/foo/bar
    or for the default instance
    rtmp://yourfmshost/foo/_definst_
    but because it's the default instance you may omit it as
    well:
    rtmp://yourfmshost/foo
    - When the NetConnection is established you need to create a
    stream on this connection and play your video.
    Please also have a look at the Devcenter for FMS - there are
    many samples and easy to use step-by-step tutorials there that will
    be of help for you.
    http://www.adobe.com/devnet/flashmediaserver
    Regarding your concerns about the edge process:
    Every FMS Server always runs 3 processes: master, core and
    edge. In short, the edge is the process which talks to the client,
    the core runs the actual application and the master looks after
    them - more details are in the docs
    so it's nothing to worry about.
    The edge
    server is something else, i.e. a FMS install that can act as
    a proxy to an origin server. This is part of the enterprise version
    of FMS (also referred to as "Origin / Edge").
    Have fun using Flash Media Server!

  • How do I copy parts of layers from one AI doc into a new AI doc and keep/create same layer names?

    How do I copy PARTS of layers containing many objects from one CS5 AI (v.15.0.2) doc into a new CS5 AI doc and keep/create the same layer names?
    To start with, I have one fairly complex AI document with 100 layers,  with several hundred items in each layer. For example, one layer named "Stars" contains  400 separate stars (not grouped), another layer named "Crosses" contains 300 separate crosses, and a 3rd layer named "Text" contains 200 separate words (not outlined).
    If I select, by marqueeing a section of the image/artboard, some (but not all) of the individual items contained in the several layers, then  paste that selection into a new CS5 AI doc, I cannot get them to  create new layers of the same name. Instead they go into one general layer (e.g. "Layer 101") as a jumble of discrete, but unorganized objects (no layers or sublayers). In other words, I have lost the 3 main layers from which I selected a bunch of objects.
    Checking "Paste Remembers Layers" has no effect on this result. In fact "Paste Remembers Layers" does not remember layers at all. Only if I select ALL the items in the several layers will it paste those layers by those names into the new doc (or create new layers of the same names).
    Of course it is a COLOSSAL waste of time copying the ENTIRE document, then pasting the WHOLE thing into the new doc (with layers retained), then deleting the parts I DON'T need, so please don't suggest that as the solution.

    No Monica, nothing in Plug-ins other than the standard installed items (extensions, filters, formats, etc.). No 3rd-part clipboard extension on my computer that I'm aware of, either. All frustratingly basic. And my other CS5 Adobe programs appear to work well, at least to the extent that I am familiar with them.
    So, from what I can tell of the various comments (thanks to all of you), am I correct in thinking that it seems I can't, in fact, do what all of you can do (that is, copy some objects from some layers in one doc and paste into another doc preserving those same layers by name and organization, and each containing the correct objects from each original layer)?
    If so, that solves half my issue - "is it supposed to be possible to do it"; leaving just the other half - "why can't I do it too".
    I'll get those screenshots made and posted later just in case I haven't adequately described the issue, or y'all haven't understood it.

  • New GL - Doc Splitting - Profit Center not hitting the Zero Balance GL

    Dear SAP New GL Gurus,
    I am trying to activate the doc splitting where the system uses a GL Account to ensure that Profit Center wise Trial Balances are tallied.
    I have done the following configuration till now, and I feel that these steps should ideally split the doc and post the PCA Adjustment Account Entry - I think its the Zero Balance Clearing account that the system should ideally be using.
    I am not sure what I am missing here - This is what is done till now:
    1. Activated Document Splitting - Used Standard Method 0000000012.
    2. Classified GL Accounts for Doc Splitting as per standard SAP categories.
    3. Classify Doc Types with assignments of Transaction and Variant. Done as per standard, no changes made.
    4. Defined Zero Balance Clearing Account.
    5. Define Document Splitting Characteristics for General Ledger Accounting - Made Profit Center field as Mandatory
    6. Define Document Splitting Characteristics for Controlling - Left it BLANK as Point No. 5 is done for GL Accounting.
    7. Define Post-Capitalization of Cash Discount to Assets - Ignored
    8. Edit Constants for Nonassigned Processes - Ignored
    Under Real-Time Integration of Controlling with Financial Accounting:
    1. Standard variant 0001 used.
    2. Assigned 0001 variant on the Co Code.
    3. Define Rules for Selecting CO Line Items - Ignored
    4. Define Account Determination for Real-Time Integration - Ignored
    Accouting Entry posted by me - Both lines are Balance Sheet items:
    DR     Bank GL     Profit Center X
    CR     Bank GL     Profit Center Y
    Please help me out here.
    I will assign full points.
    Many Thanks
    Bob

    Hi,
    Yes. Very much. you need to assign scenarios even if you are using leading ledger.
    In any enty there will be minimum two views, Entry view and Ledger View
    Ex.
    Entry view
    Account    Amt    A/c Assig objects - Profit Center
    Customer  400                                   
    Sale A/c  -400                                     2000
    Gl View
    Account                    Amt    A/c Assig objects - Profit Center
    Customer Recon A/c  400                                   
    Sale A/c                   -400                                     2000
    If you dont assign Profit center in the scenario to the leading ledger, in gl view you will not be able to see profit center against the sales line item
    Assign points if useful
    Regards
    Raghu Ram

  • Why can't I type in my new word doc that I changed from PDF?

    I need help! I can't type in my word doc that I converted from PDF.

    You may have visited a website that has disabled the location bar.<br />
    Try to open a new window to see if that gives you a working location bar.<br />
    If that works then close the not working window and close and restart Firefox to see if that stays.<br />
    * http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
    * http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings

  • Why does new Illustrator doc have XMP OriginalDocumentId?

    When I create a new doc in Illustrator and immediately view the XMP metadata, this document always has a xmpMM:OriginalDocumentID and a xmpMM:DerivedFrom structure. Why is that? I would expect that this document only gets a xmpMM:DocumentID and a xmpMM:InstanceID.
    Even worse, all new Illustrator documents have the same xmpMM:OriginalDocumentID. So maybe that's happening, because they are internally all derived from the same template? But from an XMP perspective, this means they are all based on the same original work, which is, of course, not true.
    This is not happening in Photoshop. A new document has no xmpMM section at all and only gets one when it is saved (but without xmpMM:OriginalDocumentID and no xmpMM:DerivedFrom structure).
    The Illustrator behaviour seems to be inconsistent and breaks my XMP-based workflow. Is there any reason for this strange behaviour?
    I'm using Adobe CS.

    I think the startup profiles are part of the problem. They probably have their own xmpMM:DocumentID and when creating a new file based on such a profile, the new file inherits the template's DocumentID as OriginalDocumentID.
    Also, there is no way in Adobe UIs to delete those OriginalDocumentIDs. I probably would need to use a command-line tool such as exiftool. But this is hopefully not the intended way of working with it.

  • New sales doc. type scenario-Urgent

    Hi all,
    I have got a scenario:
    A customer complaint order type has to be made which will take the reference of a Billing doc. Now, based on that Customer complaint order type, Credti memo request and returns order going to be made.
    I have made a customer complaint order type Zcut and maintain Item category as Zcat.
    In vov8, i have maintained:
    created no. range for the doc. type
    Check reference mandatory field with "M"
    Billing Block field with "06" sign & approval.
    In vov7, i have maintained:
    Billing relevance "F'
    Pricing "X"
    I have also maintained copycontrol measures between Biiling doc. and sales doc. with VTAF and between Sales doc. & Sales doc. with VTAA.
    Now, when iam creating this doc. type with reference to the Billing doc. , it is not doing following things:
    1.no customer name, quantity, amount is getting copied
    2. required del. Date is coming as mandatory
    can anyone give solution for it. it is urgent
    Thanx in advance,
    Sourav

    Pls check..for VTAF
    =>Header level--between ur billing type which i assume is F2 and complaint SO e.g. ZCUT
    three routine
    DataT 052 Billing doc.header----use for data transfer from VBAK
    DataT 103 Bus Data Hdr Billing---use for copying business data
    DataT 003 Bill.header partner-----use for copying business partners
    => At item level u wll see TAN which i assume ur using while issue goods..duoble click on TAN...in new screen
    ur "ItemCat Proposa" at target sales doc type ZCUT should have ZCAT ie ur return item category
    also check following routine
    DataT 153 Item from BillingDoc-----use for VBAP data transfer
    DataT 104 Bus Data Item Billng-- --use for business data transfer at item level
    DataT 004 Bill.item partner-----use for business partners transfer at item level
    Copying requirements    303 "Always an item"
    Pos./neg. quantity         Blank   
    Pricing type                  D
    Regards
    Jagdish

  • Saving a new .pdf doc that is (a)chapter(s) of a large doc

    Is there a way to save only certain chapters from a .pdf doc?
    These documents have chapters.
    http://support.spss.com/ProductsExt/SPSS/Documentation/Manuals/16.0/SPSS%20Base%20User's%2 0Guide%2016.0.pdf
    There is an index on the left. It is possible to select a few chapters and print them. Is there a way to save only those chapters to a new .pdf document?

    > It is possible to select a few chapters and print them.
    Yes, in the print dialog you can specify a print range.
    > Is there a way to save only those chapters to a new .pdf document?
    Possible with Adobe Acrobat, not Adobe Reader.

  • Generate new winword docs and save them dynamically to tmp folder

    Hi All,
    Is there any possible way to create a new doc file and save it in a temporary folder?
    Thanks
    Bala

    Yes, there are lots of possible solutions. You have not specified your specific need, but probably you could use POI to do what you want.
    http://jakarta.apache.org/poi/

  • 9i New Features Doc???

    I am planning the rollout of Discoverer. Currently we have 9iAS 1.0.2.2 installed which correlates to Disco 4i. I am looking to see if there are compelling reasons upgrade to Disco 9i (v5), but can not find any documents that list the new features. I will need to justify based on Disco features not 9iAS R2.
    Has anyone seen a doc like this, or have you made your own comparison and willing to share?
    thx,
    r.b.

    Check out the following URL to the Oracle Forms 9i technical pages on OTN. I'm sure you'll find what you need here.
    http://otn.oracle.com/products/forms/techlisting9i.html
    Regards,
    Theo Tol
    http://www.oracledeveloper.nl/

  • Configuration for new po doc type

    Hi guys,
    We are on a roll-out project.  We want to use new doc types for Purchase Orders and scheduling agreements for the new plant.  What are all the configurations required for printing of these new doc types?
    Thanks in advance,
    Chintu

    Hi chintu,
    If you have copied new document type NB, No specific configuration is required , maintain a condition record in MN04 for your document type it will generate print based on settings in MN04, if you give out put to be triggered with own transaction use ME9F for taking print out, if you use immediate o/p in Mn04 , once you save the PO it generates a Print
    Settings required to trigger the output/type
    Copy Message type NEU and create your OWN , and assign new form to this message type , insert this message type in Message Schema
    Below is the path :
    SAP Customizing Implementation Guide >Materials Management>Purchasing>Messages>Output Control>Message Types>Define Message Types for Purchase Order : Here you can assign your new form and maintain all the setting like NEU
    Message Determination Schemas -->Define Message Schema for Purchase Order
    Insert your message type here
    In order to trigger the Print at document level automatically you have to maintain Condition records
    Hope it will help u
    Regards
    Hareesha

  • HT202879 Pages from iWork09 on older Mac and using new Pages doc. on it

    I have Pages [iWork09] on my MacPro [main machine] which is older and runs 10.7.5....I have Pages 5.1 on my MacBookPro which is running Mavericks - the problem arises because once I open a Pages doc. in my MBP it becomes a newer version and when I save it back to the MP, I can't open it =  I tried to download and install the new Pages on the MP and it won't because it requires ver. 10.9 - but I can't get that on my MP == so what do I do to work with documents worked on the MBP and yet saved to the MP?

    Pages v5+ document format is entirely different from previous versions and Pages ’09 v4.n cannot open it. Since Pages v5+ is missing about 100+ features from the previous v4.n, you have no assurance that content you create in the older version will survive intact into Pages v5+, or via roundtrip by Pages v5+ exporting to Pages ’09 document format.
    If you had iWork ’09 installed on the MBP before installing the Pages v5+ application, the iWork bits will remain unscathed in /Applications/iWork '09 folder. If true, I would standardize on Pages v4.n on both platforms for now. If you only have Pages v5+ on your MBP, then I would recommend 1) export to Pages ’09, for sort of compatibility with your iWork on the MacPro. Or, you could simply standardize on .doc between the two. Pages v5+ defaults to .docx on export, both this is selectable to .doc.
    Any Pages document that you double-click to open on Mavericks will be opened (and mangled) by Pages v5+. A right-click on the icon, then choosing Open With... Pages (4.3) would keep things sane.

Maybe you are looking for