FLVplayback component mod help (Flash CS3, as3)

can anyone help me with the actionscript needed to
dynamically call a flv video into cs3's default
flvplaybackcomponent with a variable?
i have it working on as2 but the scripting must be different
in as3 cause it dosnt work there.
my as2 code is as follows:
stop();
var passed:String = video;
player.contentPath= video;
this allows me to use videoplayer.swf?video=[video].flv
but i need this to work in cs3 flash9 player with the
fullscreen support
any help would be greatly appreciated.

which version of flash cs3 do you have?

Similar Messages

DateChooser Component for Flash CS3, AS3.0

Where and how do I get the datechooser for Flash CS3, AS3.0?

which version of flash cs3 do you have?

Customize "FLVPlayback.as" provided by Flash CS3

How can we modify & recompile "FLVPlayback.as" provided
by Flash CS3 located at [C:\Program Files\Adobe\Adobe Flash
CS3\en\Configuration\Component Source\ActionScript
3.0\FLVPlayback\fl\video]
Thanks in advance,
Siraj Khan
[email protected]

Link
to same question
Please don't cross post.

Flex Component Kit for Flash CS3

Hi,
I created a flex component using the component kit for Flash
CS3. The component contains a vector image wrapped as a MovieClip.
In my flex application I add the component as child to a
Canvas. It works well if i add it like -
<mx:Canvas id="container" >
<local:MyComponent />
</mx:Canvas>
or like -
container.addChild (new MyComponent()); //DISPLAYED
However, the component is not displayed when I do the
following -
var array:Array = new Array(new MyComponent());
container.addChild(array[0]); //NOT DISPLAYED
Can somebody tell me why this is so?
I would also like to know if such components can be
instantiated using flash.utils.getDefinitionByName.
I tried it but I get Error #1065: Variable 'componentName' is
not defined
Could somebody please tell me what is going on?

Hi bolaughlin,
Thanks for you reply.
Error 1065:
import MyComponent;
var comp:MyComponent = new MyComponent(); //Error 1065
//Where MyComponent is the Flash CS3 clip that was converted
to Flex component
I have a workaround for this -
I first add the component as an Mxml tag with visibility
false and then remove the component
with actionscript. Now all instantiations work normally (this
includes all components in the SWC).
<mx:Canvas id="container" >
<local:MyComponent visible="false" />
</mx:Canvas>
and in <mx:Script>
container.removeAllChildren();
var comp:MyComponent = new MyComponent(); //Works
var anotherComp:MyOtherComponent = new MyOtherComponent();
//From the same swc; This also works.
I have a feeling this problem is similar to the 'shared
fonts' problem that
existed with Flash MX and below.
Anyway, even though I don't really know whats happening, my
project can
move ahead. Hopefully some Guru will explain this.
Until then...thank you very much.

Adding Easing to Flash CS3 AS3 UI Components

I am working on an AS3 project where I am forced to use
stock, out-of-the-box Flash CS3 AS3 UI Components.
Is there any way to add easing to the UIScrollBar [ and
the other components that use the UIScrollBar like the List,
ScrollPane, TileList ]
If anyone has a solution I will name my next child after you!!
Diane [ aka Eugenia ]

Hi,
Thanks for your reply.
Does "unlikely" mean "definately not" or "you are not sure" ?
As I stated .....
"I am forced to use
stock, out-of-the-box Flash CS3 AS3 UI Components."...
So "making my own objects" is not an option.
Thanks again for replying,
Diane

Any Flash CS3 AS3 Map samples available that work in AIR?

Any Flash CS3 AS3 Map samples available that work in AIR?
Like Google or Yahoo.
The ones that I have tried fail to work when making the final
AIR app.

I changed the profile of both to AIR2.0, and it still shows AIR1.0 in the properties panel. I'm able to publish the Panel.swf now but it also generates an unwanted panel-app.xml -- unwanted because panel is not an app, it's merely a SWF to run inside the main app.
Is there a better way? And why does it still say AIR1.0 in the properties panel?

How to change Layer Mode in Flash CS3?

Hello,
I would like to know how to change the layer mode to
"multiply" with flash.
I usually use photoshop CS2 to color my lineart. I set the
top layer (the lines) to "multiply" to make the white transparent,
and then apply color on layers underneath.
I want to learn how to color my art on Flash, but I'm still a
noob. I imported my bitmap lineart (inked by hand) and turned it
into vectors (modify>bitmap>trace bitmap). Then I created a
second layer underneath for the color, just like I would do in
photoshop.
But, the first layer's white areas are not transparent, so
the color is not visible.
So basically I just need to know how to change the top
layer's mode to "multiply" so I can see through the white areas .
Any help will be very appreciated.

Nicochi,
> So basically I just need to know how to change the
> top layer's mode to "multiply" so I can see through
> the white areas.
Convert the top layer's artwork (raster or vector, doesn't
matter) into
a movie clip symbol -- select the artwork and go to Modify
> Convert to
Symbol -- and you'll be set. Once the symbol exists, you'll
see mode
choices in the Property inspector.
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design."

Video not displayed in fullscreen mode in Flash CS3..

Hi, I am bit new to flash. I had designed a flash interactive material and in it when gone to video section the screen goes black in full screen mode when the output in made into windows projector (.exe). But in normal mode the viedo runs smoothly. I am using Flash CS3. What might be the reason? Thzz....

hello niunaiwehua, you will probably get more helpful answers, when you post your question in a forum specialised on flash development like [http://forums.adobe.com/community/flash]. thank you

Flash CS3: AS3 - ReferenceError #1065 Variable is not defined

I have developed several actionscript classes. Two of these
classes are associated with MovieClip objects in the library. The
MovieClips have their Linkage Base Classes set to their respective
package and class locations and when I check the Linkage settings
(using the check mark icon) Flash CS3 reports that it can find the
associated classes for both MovieClips.
When I check the syntax of my code there are no problems, and
when I test the Flash movie no Compile Errors are shown. Yet, in
the output window I get the following error:
ReferenceError: Error #1065: Variable class1 is not defined.
ReferenceError: Error #1065: Variable class2 is not defined.
I have placed class1 and class2 in the above error messages
to represent the classes that are associated with the MovieClip.
Am I missing an import command somewhere? I have the base
class path properly set in the preferences of Flash CS3.
Thanks,

It appears that this issue was due to some of my classes not
being marked as public. I had been following examples from AS2 that
had the classes marked as dynamic without a private or public
identifier. Apparently, AS3 assumes all unmarked classes are
private.

FLVPlayback Memory Leak in Flash CS3

Hi There,
I' making a flash file with AS2 in Flash CS3. I put a FlVPlayback in stage and let it load a couple of FLV files from my local HDD and playing continuously. I use "addEventListener" to check the current running flash movie is completed. After complete event occur, I load another flv movie to paly again.Here, I noticed that memory usage is increasing every time a new flv file is loaded and played. I heard "addEventListener" in CS3 is causing the memory leak and not being detected by GC.
Please let me know if there is a solution to solve the memory leak issue. I posted my codes here to know something I'm doing wrong.
Thanks in advance...
================================
onClipEvent (load)
    function _fun_complete(eventObj)
        this.autoRewind = "true";
        var _v1 = _root.v;
        var _v2 = _root.FLVlists.length;
        --__v2;
        if (_v1 < _v2)
            ++_v1;
        else
            _v1 = 0;
        this.contentPath = _root.FLVlists[_v1].path;
        var _v3 = _root.listVids[_v1].width;
        var _v4 = (stage._width - _v3) / 2;
        this._x = _v4;
        _root.v = _v1;
        this.play();
    this.addEventListener("complete", _fun_complete);

Helllo Friend,
Thanks for your feedback. The problem with removeEventListener is that , the player stops and not playing anymore. In my application, I nned to loop and play one FLV files after another. For example, I need to play 3 flv files, File1.flv, File2.flv, File3.flv. I load and play File1.flv first. Once complete event trigger from "addEventlisterner" , then I load File2.flv and then File3.flv and then Flie1.flv. So it needs play continuously and causing memory leak. Please let me know if there is another way of working around.
Regards

FLASH CS3[AS3] – MICROPHONE – RECORD AND SAVE AS WAVE FILE

HI,
I need solution for this one.Can we record,play and save an audio using flash CS3 astion script.
It should be something like this:http://justflash.byethost12.com/microphone/microphone_recandsave1.html
I have searched for the soluiton but i found it in flash cs5.I need it in flash cs3.
Looking for the solution.
Thank You

Hello Jeff,
From the LabVIEW Help description:
Sound File Write Simple (Windows, Linux)
Writes data from an array of waveforms to a .wav file. This VI automatically opens, writes to, and closes the .wav file. Windows You must have DirectX 8.0 or later to use this VI. Linux You must have the Open Sound System (OSS) driver to use this VI.
So, the data input to Sound File Write Simple.vi is an array of waveforms. However, if you only have one waveform, you can build an array that contains only your single waveform using the Build Array VI. As described in the LabVIEW Help description:
Build Array
Concatenates multiple arrays or appends elements to an n-dimensional array. You also can use the Replace Array Subset function to modify an existing array.
So, for example, you could run your single waveform into the Build Array function and get an array of waveforms containing only your waveform. You could then wire this array of waveforms to the Sound File Write Simple.vi. This is shown in the image below.
Message Edited by Matt A on 06-28-2007 09:58 PM
Matt Anderson
Hardware Services Marketing Manager
National Instruments
Attachments:
Build Array.JPG ‏11 KB

Problem Installing Flex Component Kit for Flash CS3

i have downloaded the mxp files from here:
http://www.adobe.com/cfusion/entitlement/index.cfm?e=flex_skins
And installed them using the extension manager (flash cs4) but i don't get the new commands added (rebooted flash cs4, of course...)
Any ideas please?

Would you mind posting your question on the Flex Kit for
Flash CS3 discussion page on Adobe Labs? This way the engineers
developing the kit can respond.
Here's the link:
Flex
Kit Discussion

Need help - problems with embedding bold fonts (Flash CS3, AS3)

So I'm tearing my hair out over this one project where I'm
trying to embed Arial in a project so that it can be used by two
different dynamic text fields. Nothing I seems to do works. If I
try embedding the font using the Properties window and set the text
fields to bold, the text doesn't appear. If I debold the two text
fields, the text DOES appear - but of course, without the bold. If
I try to embed the font in the library, link it, and use two
different TextFormat objects to format the text fields, the text
shows up - but it isn't bold, even though I set the TextFormat.bold
property to true.
So what's going on here? How can I fix this?
Thank you for your time.

In the Library, choose 'New Font'. Select 'Arial Bold' from
the 'Font' drop-down (don't just select Arial and click the bold
checkbox). Select the newly added from from the Library,
right-click and choose 'Linkage' from the context menu, and click
'Export for ActionScript'. The Linkage field should read eg 'Arial
Bold'.
If you want to apply Arial Bold to an entire text field,
select the field and, in the Font drop-down in the Property
Inspector, look for 'Arial Bold*' (with an asterisk): this is the
embedded version of Arial Bold that you just created.
So, you're using a specific Bold version of the font, not
merely setting a font to bold.

Need help flash cs3

Hi all,
I have a very basic 5 rotating images with a simple script to link to a company website when a person click on the pictures.
My question is when i have uploaded it onto my website it works for a few days perfectly, then all i get is a white blank square where the flash ad should be. I have to rename the .swf file then upload it again and it works fine again for a few days.
I have other flash ads on my website and they all work fine except for this one. I cant keep changing it every few days as it is driving me crazy.
Any help would be greatly appreciated.
Thanks
Ken

By the way if you read pc magazines norton internet security
came 2nd last in the detetion rate! (Luckily for me it came with a
6month trial of kasperspy!! No more norton for me). All the big
brands were at the bottom of the list and ill try to take a pic of
it. So there MIGHT be a virus, who knows?

Keynote swfs not compatible with Flash cs3 As3

I have flash timeline controls now written in AS3 but when I export swf from keynote I get a conflict- looks like keynote swf exports in as2 only. Is there anyway to change the keynote preference? Anyone know of other converters to produce swfs compatible with AS3?

Have you tried visualhub. It is a very versatile format transformer.
Mireille

FLVplayback component mod help (Flash CS3, as3)

Similar Messages

Maybe you are looking for