Any Flash CS3 AS3 Map samples available that work in AIR?

Any Flash CS3 AS3 Map samples available that work in AIR?
Like Google or Yahoo.
The ones that I have tried fail to work when making the final
AIR app.

I changed the profile of both to AIR2.0, and it still shows AIR1.0 in the properties panel. I'm able to publish the Panel.swf now but it also generates an unwanted panel-app.xml -- unwanted because panel is not an app, it's merely a SWF to run inside the main app.
Is there a better way? And why does it still say AIR1.0 in the properties panel?

Similar Messages

  • Adding Easing to Flash CS3 AS3 UI Components

    I am working on an AS3 project where I am forced to use
    stock, out-of-the-box Flash CS3 AS3 UI Components.
    Is there any way to add easing to the UIScrollBar [ and
    the other components that use the UIScrollBar  like the List,
      ScrollPane, TileList ]
    If anyone has a solution I will name my next child after you!!
    Diane   [ aka Eugenia ]

    Hi,
    Thanks for your reply.
    Does "unlikely" mean "definately not" or "you are not sure" ?
    As I stated .....
    "I am forced to use
    stock, out-of-the-box Flash CS3 AS3 UI Components."...
    So "making my own objects" is not an option.
    Thanks again for replying,
    Diane

  • Flash CS3: AS3 - ReferenceError #1065 Variable is not defined

    I have developed several actionscript classes. Two of these
    classes are associated with MovieClip objects in the library. The
    MovieClips have their Linkage Base Classes set to their respective
    package and class locations and when I check the Linkage settings
    (using the check mark icon) Flash CS3 reports that it can find the
    associated classes for both MovieClips.
    When I check the syntax of my code there are no problems, and
    when I test the Flash movie no Compile Errors are shown. Yet, in
    the output window I get the following error:
    ReferenceError: Error #1065: Variable class1 is not defined.
    ReferenceError: Error #1065: Variable class2 is not defined.
    I have placed class1 and class2 in the above error messages
    to represent the classes that are associated with the MovieClip.
    Am I missing an import command somewhere? I have the base
    class path properly set in the preferences of Flash CS3.
    Thanks,

    It appears that this issue was due to some of my classes not
    being marked as public. I had been following examples from AS2 that
    had the classes marked as dynamic without a private or public
    identifier. Apparently, AS3 assumes all unmarked classes are
    private.

  • DateChooser Component for Flash CS3, AS3.0

    Where and how do I get the datechooser for Flash CS3, AS3.0?

    which version of flash cs3 do you have?

  • FLVplayback component mod help (Flash CS3, as3)

    can anyone help me with the actionscript needed to
    dynamically call a flv video into cs3's default
    flvplaybackcomponent with a variable?
    i have it working on as2 but the scripting must be different
    in as3 cause it dosnt work there.
    my as2 code is as follows:
    stop();
    var passed:String = video;
    player.contentPath= video;
    this allows me to use videoplayer.swf?video=[video].flv
    but i need this to work in cs3 flash9 player with the
    fullscreen support
    any help would be greatly appreciated.

    which version of flash cs3 do you have?

  • Flash CS3 deactivate option not available

    Hi,
    I have a copy of Adobe Flash CS3 Professional installed on my work desktop. I'm soon going offsite for a couple of months during which period I'd be using my work laptop instead. My laptop does not have Flash CS3 on it, so I was hoping of transferring the license to the laptop.
    I read somewhere that I need to deactivate the license on my desktop (using Help >> Deactivate license) before uninstalling it. Unfortunately, I don't see that option in the Help menu at all.
    Could someone please help??
    Thanks!
    Mohsin

    Looks like you might be using a multi-seat (or otherwise non-retail) version. You may have to contact Adobe Customer Support.
    Somewhat related threads:
    http://forums.adobe.com/thread/457835
    http://forums.adobe.com/message/2137381
    Message was edited by: Raymond Basque

  • FLASH CS3[AS3] – MICROPHONE – RECORD AND SAVE AS WAVE FILE

    HI,
    I need solution for this one.Can we record,play and save an audio using flash CS3 astion script.
    It should be something like this:http://justflash.byethost12.com/microphone/microphone_recandsave1.html
    I have searched for the soluiton but i found it in flash cs5.I need it in flash cs3.
    Looking for the solution.
    Thank You

    Hello Jeff,
    From the LabVIEW Help description:
    Sound File Write Simple (Windows, Linux)
    Writes data from an array of waveforms to a .wav file. This VI automatically opens, writes to, and closes the .wav file. Windows You must have DirectX 8.0 or later to use this VI. Linux You must have the Open Sound System (OSS) driver to use this VI.
    So, the data input to Sound File Write Simple.vi is an array of waveforms. However, if you only have one waveform, you can build an array that contains only your single waveform using the Build Array VI. As described in the LabVIEW Help description:
    Build Array
    Concatenates multiple arrays or appends elements to an n-dimensional array. You also can use the Replace Array Subset function to modify an existing array.
    So, for example, you could run your single waveform into the Build Array function and get an array of waveforms containing only your waveform. You could then wire this array of waveforms to the Sound File Write Simple.vi. This is shown in the image below.
    Message Edited by Matt A on 06-28-2007 09:58 PM
    Matt Anderson
    Hardware Services Marketing Manager
    National Instruments
    Attachments:
    Build Array.JPG ‏11 KB

  • Getting Flash CS3/CS4 AIR1.0 app to work in Flash CS5

    This is a question in regards to Flash CS5 but since it's specific to AIR I'm posting here.
    I have a Flash CS3 AIR 1.0 project and I can't get it to compile in Flash CS5. If I recall I installed some extension for Flash CS3 to be able to create AIR apps. It was an Adobe extension.
    The app involves two SWFs. The first is the main app, Main.fla, the second is a window panel template, Panel.fla. The Main app would compile and include the Panel.swf which it would instantiate and load into new windows to create a paneled app.
    I was able to open Main.fla and publish in CS5 with no problems. The profile even says AIR 1.0 in the properties panel, although when I click edit it shows AIR 2.0 selected in the dropdown, and there is no option for another version of AIR -- which version of AIR is actually being created? Not important as long as it work...
    The Panel.fla on the other hand I cannot get to compile. The profile still says AIR 1.0 in properties but the dropdown in the publish settings says Flash Player 9, and when I compile it breaks on any AIR references, for instance:
    1119: Access of possibly undefined property nativeWindow through a reference with static type flash.display:Stage.
    I have this classpath:
    $(AppConfig)/ActionScript 3.0 AIR 1.0/Classes
    But apparently that is no longer good. I've looked in all the Flash CS5 directories I could find and there is no such dir.
    The issue here is that Panel.fla is NOT an AIR app, it's a SWF which runs in an AIR app. How should get this working?

    I changed the profile of both to AIR2.0, and it still shows AIR1.0 in the properties panel. I'm able to publish the Panel.swf now but it also generates an unwanted panel-app.xml -- unwanted because panel is not an app, it's merely a SWF to run inside the main app.
    Is there a better way? And why does it still say AIR1.0 in the properties panel?

  • How do I change the default map to one that works. Apple maps nearly killed me today in Leicester as it tried to take me down 2 pedestrian areas, 1 no entry and told me to do a u turn about 6 times at no u turn junctions.

    Need to change default map on iphone. The default maps app is dangerous - it wanted to take me down pedestrian areas and through no entries whilst trying to navigate in Leicester. It needs to be removed from my phone as it is a hazard. I clicked on a link in an email and the maps app was opened and so I used it to navigate. Big mistake. This app is a serious hazard!

    I don't really want to get into a long debate here, but just to put in some background info. I travel a lot in the uk and have done for many years. For the last couple of years I have used either Nav free or waze as sat nav maps on my iphone. Whilst there has been some errors, they have been useable - and of course you have to use your common sense whilst using them.
    On this occasion someone emailed an address to me in Leicester. I wanted to drive from on point in Leicester to this address that has been emailed to me. I clicked on the address in the email and it defaulted to the apple maps and plotted a route. It was about 1 mile away and told me it would take about 8 mins.
    This was the worse journey I have experienced with a 'sat nav' - it tried to take me through 2 pedestrian areas and 1 no entry in that short journey. Clearly I didn't go I. The pedestrian areas or turn into the one way. However, the apple. Aps persisted to try and make me take these route, and I. The process kept urging me to take a u turn where it was clearly sign posted that it was illegal to do so.
    In the end, I pulled over and switched to Waze - it directed me straight to my destination without any errors.
    The point is, I am not talking about a mistake in the middle of no where. This is a major city in the UK - and fairly central ie near the city centre.
    Generally I love Apple products and don't knock them as a company.
    The original question was genuine- can I change the default mapping app so that I don't end up using the apple maps app again. It was a disaster like nothing I have seen before.
    I now know that the answer is no.
    Apple clearly need to sort this out.

  • Does any one know of an MP3 player that works on Phones?

    I'm looking for an MP3 player that works on mobile phones, multi-track player that lists out the songs. I've been using widgets from places like reverb nation, sound cloud, but I can't get them those show up on mobile phones.
    Anyone have any suggestions?

    These are playlist players which use flash.
    To get these to work on iOS devices they need to fallback to HTML5.
    The problem is that HTML5 has not been developed enough and there is no cross browser standard.
    The JW player attempts to overcome this by using two different versions of the player skin - one for HTML5 and the other for flash.
    The one shown on this page uses flash with fallback to HTML5 but I have no idea if it works on the iPhone...
    http://www.iwebformusicians.com/Website-Music-Players/XML-Playlist.html
    A test version using HTML5 with fallback to flash works in Safari but not with Chrome or Firefox.

  • Any Flash CS3 Mac users?

    Where you click something on stage, and it takes what feels
    like 2 seconds for Flash to respond with the focus selection?
    The .fla is only 1.5MB, and doesn't have that many assets in
    the library.
    Sometimes this goes on for hours. Sometimes an application
    open/close resolves the lag, others a computer restart does.
    Sometimes I vow never to work in Flash again, and go work on
    something else.
    I've tried reinstalling multiple times. I've done the regular
    OSX maintenance routines, although Flash seems to be the only
    problem, all other apps are snappy non-stop.

    quote:
    Originally posted by:
    selitaM
    I'm on an iMac Intel Core 2 Duo and I'm not experiencing any
    lag with switching from different open flash files. I'm also
    running it Bridge, Photoshop and Dreamweaver simultaneously.
    Perhaps you need more RAM. Also, try saving more often.
    Good luck with the problem.
    I'm running on Intel Core 2 Duo 2.33ghz with 3gig RAM with
    Nvidia Geforce 7600 GT, so I dont think it's the computer, i as
    well can run Illustrator Photoshop Dreamweaver and GoLive as well
    as Flash, and experience the same probelm if I only have flash
    open.. yes, it's not only when switching tabs, but typing, and
    editing symbols. It's not very practicable, since I mainly code all
    my movies, that when I type a line of code or function or what have
    you, I can finish typing and have to wait for the words to finish
    on screen.
    another reason I know it's not the computer, my Art Director
    at the firm works on Mac Pro with 2 3ghz Dual-Core Xeon processor
    8gigs of RAM and Nvidia Quadro FX.. his computer is stacked, and
    the same thing happens to him.

  • Keynote swfs not compatible with Flash cs3 As3

    I have flash timeline controls now written in AS3 but when I export swf from keynote I get a conflict- looks like keynote swf exports in as2 only. Is there anyway to change the keynote preference? Anyone know of other converters to produce swfs compatible with AS3?

    Have you tried visualhub. It is a very versatile format transformer.
    Mireille

  • Need help - problems with embedding bold fonts (Flash CS3, AS3)

    So I'm tearing my hair out over this one project where I'm
    trying to embed Arial in a project so that it can be used by two
    different dynamic text fields. Nothing I seems to do works. If I
    try embedding the font using the Properties window and set the text
    fields to bold, the text doesn't appear. If I debold the two text
    fields, the text DOES appear - but of course, without the bold. If
    I try to embed the font in the library, link it, and use two
    different TextFormat objects to format the text fields, the text
    shows up - but it isn't bold, even though I set the TextFormat.bold
    property to true.
    So what's going on here? How can I fix this?
    Thank you for your time.

    In the Library, choose 'New Font'. Select 'Arial Bold' from
    the 'Font' drop-down (don't just select Arial and click the bold
    checkbox). Select the newly added from from the Library,
    right-click and choose 'Linkage' from the context menu, and click
    'Export for ActionScript'. The Linkage field should read eg 'Arial
    Bold'.
    If you want to apply Arial Bold to an entire text field,
    select the field and, in the Font drop-down in the Property
    Inspector, look for 'Arial Bold*' (with an asterisk): this is the
    embedded version of Arial Bold that you just created.
    So, you're using a specific Bold version of the font, not
    merely setting a font to bold.

  • Flash CS3 FlvPlayback Skin Stop Button is working as pause

    Hi,
         I am using the skin for FlvPlayback player I have selected the sking from given list of skin.
         The issue is When I select the skin which is having Stop Button, Stop Button is not stopping the video is it just pause the video and after click of play button it should start from begining of the video which is expected bevhaviour of Stop button.
        any one can help me to resolve this issue.
    Thanks in advance.
    Sangati

    Yup, that is how it works. You can't control which state a button is in. So when you click on it, it will go to the down state and when you let go it will go back to over (or up if you release outside).
    Not sure exactly what the "fix" is. It depends upon what you are trying to do. Generally you would need to use MovieClips instead of buttons with event handlers to tell you "button" what to do. Very few people I know actually use buttons.

  • Have any dentists found a good intraoral camera that works with an iPad?

    I Am a veterinarian doing dental work on horses- I would like to find an intraoral camera to work with my iPad Air so as to show clients - wifi or blue tooth?? App??

    The iPad cannot print via BT.  It uses wifi with built-in AirPrint or an app from the printer manufacturer, i.e. HP, Epson, etc.  Both devices need to be on the same wifi network.
    http://support.apple.com/kb/HT4356

Maybe you are looking for