FM BBP_PD_SC_STATUS_CHANGE Accept Changes activity not allowed

Hello all
I am investigating the possibility to create a program which will Accept Changes on all rejected Shopping Carts in mass.
I tried to run FM BBP_PD_SC_STATUS_CHANGE but it gives me error message activity not allowed.
Table TJ05 holds permitted activities for Shopping Cart,
How is it possible to customize the table TJ05???
Accept Changes activity is done usually by SC Requestor after it was rejected by approver.
Does have anybody a hint on this topic?
Thank you
Imrich

Hi,
I also have same requirement. Can you help me how you have managed with this?
Thanks,
Vishnu

Similar Messages

IOS5 Reminders, location disabled if location changes are not allowed

Hi,
the location feature of Reminders works, but as soon as I don't allow changes to Location, I can't add or remove a location to a reminder.
Location service for Reminders is enabled, just changes are not allowed under Restrictions.
This looks like a bug.
thanks for any help,
cheers,
-g
iPhone4, iOS5

Same problem here. (iOS 5 / iPhone 4)
Location reminders enabled in location service, changed in restrictions not allowed.
Now I can only use time settings in the reminders app, the location function is disabled (grey).
I do not want to leave the system open and allow changes to the location services - especially Find My iPhone - just to use this feature, but I would like a fix for this.
Anyway to send a bug report for this somewhere?

INFO-RECORD CHANGE MODE NOT ALLOWING.

Hi,
Transaction Code= ME12
Vendor= xx
Material= xxxxxx
Purch. Org= xx
Plant= x
Info rec="blank--"
Info Category= standard
Error Msg displayed-
Missing authorization:Info rec change plant xx
ABOVE THE ERROR WHAT COULD BE THE REASON?
BUT that vendor and another material are allowing,but above particular combination is not allowing.i checked source list ,MM-basic1 view there is no check and block.
THANKS,
KUMAR.

Hi
Are you sure that the other vendor and material that you are using or the same vendor and other material that you are using are all from the same plant.
The error message specificaly says that user does not have authorisation for that Plant. So check with some other combinations in that plant.
Also, on the screen on which it is giving this error message, in the address bar where you write the tcode, type SU53 and enter. It will take you to authorisation check screen and will display which authorisation are missing for the user. You can take this to your basis team and get the required authorisation.
Regards,
Vishal

Material Master changes are not allowing (MM02)

Dear All,
we have done year end activities successfully for the 2010 fiscal year. we are following January to December. In 2011 January 9th date we have activated Material ledger. after that when we try to go to material master the system is giving this error.
"Currency was not defined at production startup
Message no. C+040
Diagnosis
You have set the material ledger to productive in valuatione area DEL1. Nevertheless, information about the currency settings at the time of production startup are missing.
System Response
The system cannot ensure data consistency, since it is not possible to compare the current currency settings with those made at production startup.
Procedure
1. Make sure that the currency settings have not been changed since material ledger production startup in valuation area DEL1.
2. Inform your system administrator."
Even when I try to create the new material master it is showing the same error.
Could anybody guide me how to solve this.
Thanks and regards,
Mr.Rao

Hi Mr Rao ,
Your ML currency settings are incorrect .. which is causing the issue..
A . Have you checked the following notes which give a detailed information about Material Ledger activation: 596558 Material ledger production startup 384145 Advice note on material ledger production startup 165844 Material ledger production startup Please, check attached note 596558, which provides recommendations on Material Ledger production startup: ...before ML activation .. i hope not ..
B Always activate the material ledger for a complete company code and copy all currencies from FI. This is the only way to ensure the reconciliation with FI. c) In addition, it is recommended that you activate the material ledger for a complete company code because the invoice verification can neither store invoices that contain materials from plants the material ledgers of which are active nor more materials from plants the material ledger of which is not active. ... Please, consider that only transactions performed after the startup will be taken into account for the actual price calculation.
C .Now to correct it .. you have to deactive ML and correct the currencies and then re-activate ML . Have a look into SAP : Note 53947 - Changing currencies after production startup. Now , are e the actual activities now posted and production is active .. if yes .. the deactivating ML is a pain.
D .If the Material ledger is already set to u201CProductiveu201D, run the report SAPRCKMJX using SE38. This report should only be run in Development or Testing environment. It is not recommended to be used in Production. It may be used in case there is no activity in the plant (no stock, no movements have happened ever). SAP recommends use of their CO-PC development support for this (OSS Note 108374).
Please revert back for any further clarifications
Regards
Sarada

Display of emails has changed, does not allow reply or forward ?

Inbox shows emails with a wide blue horiz band...shows whole thread but there is no way to reply ? How can I go back to the old way
Why on earth do you want to change things
Cheerz
Roy

Is there not reply button on the toolbar in the message window? If you use the message pane, is there no reply button in the customize window that you can put on the toolbar?

FRM-40403 A CALLING FORM HAS UNAPPLIED CHANGES SAVE NOT ALLOWED .

Dear Friends
I have order data entry screen form when the order item is not yet defined
then I am using this script for calling the item definition form
DECLARE
     l_n_curr_rec NUMBER;
BEGIN
BEGIN
     :global.l_n_curr_rec2 := :COP_ORDER_DETAILS.LINE_NO;
     :GLOBAL.CLASS_CODE := :CLASS_CODE;
     :GLOBAL.LINE_NO := :LINE_NO;
:GLOBAL.USER_ID := '1';
END;
:global.cop_order_code := :cop_order_details.cop_order_code;
:global.ord_date := :cop_order_details.ord_date;
:global.command_line := 'c:\sales\new_items.fmx';
call_form(command_line);
go_block('cop_order_details');
go_record(:global.l_n_curr_rec2);
:cop_order_details.item_code := :global.item_code_var;
END;
And this script is used in the item definition ,that is the called form
BEGIN
INSERT INTO IM_INVETORY
(ITEM_CODE,ITEM_NAME_A,ITEM_NAME_E,STOCK_ITEM,ITEM_CLASS)
VALUES(:IM_NEW_ITEMS.ITEM_CODE,:IM_NEW_ITEMS.ITEM_NAME_A,:IM_NEW_ITEMS.ITEM_NAME_E,'1',:IM_NEW_ITEMS.ITEM_CLASS)
COMMIT_FORM;
Wating for your valuable aswer.
Best regards
Jamil

Hello,
Go to the help -> display last error option menu to get the complete error message.
Francois

Credit card change is not allowed ?

I lost my credit card few weeks ago and since this time, I am trying to change the credit card number with new one in order to pay my month fee.
I followed all the steps from the help section, and tried with 2 different numbers but unsuccessfully.
I also tried to send an email to adobe, but it remains without any answer...
Please, can you let me how to fix this problem?
thank you
Sebastien

Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html

Payment term is not allowed to change in MIRO.

Dear all,
When I do a inovice verification for a PO via MIRO. I find that the payment term is from the PO, which is correct. However, i want to change the payment term manually, the system doesn't allowed. The payment term will be always changed back to the one in PO.
Can anyone tell me why the change is not allowed in MIRO.
Thank you so much.
Christina.

Hi Kishore,
Thank you for your reply.
For the document which I have already posted, I will change them manually via FB02.
However, for the new coming invoice, i would like to change the payment term in MIRO directly, i don;t want to change it again after I posted.
Besides, in the other SAP system I have used, the payment term in MIRO can be changed successfully. I want to know if there is any setting can impact this?
Thanks again.

Accept Changes button visible in Approval link but not in Check Status

Dear Experts,
We are on SRM 4.0 .
After a SC is rejected partially the requester can see the SC under Check Status link with the status In Your Inbox
When the user clicks on the Detail icon, there is only CHANGE button but when the user clicks on Approval Link
he can see Description as 'Your Shopping Cart xxxxxxxxx was change/rejected in part.Please Check' and when he click on the Detail icon there are two buttons at botton Accept Changes and Change .
Why is the Accept Changes button not there in detail display of SC under check status link?
Thanks,
Anubhav

Hello,
This is the standard behaviour of SRM4.0.
When a SC has been partially rejected the the SC goes to the requestor approval inbox. Requestor can either accept the change or he/she can change the SC and order again.
If requestor accept the change that means requestor has been accept the rejection, so requestor will not be able to create the PO for that line item. He/she needs to change the SC depending on the approval note and order again.
Check status transation is used for check the status of the shopping carts. Due to that reason the Accept change button is not exist there.
Regards,
Anindya

HT202274 Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions. I recently upgraded to OSX Yosemite 10.10.1. I also have an Apple ID that works with iTunes and would like to keep i

Apple ID has my old email address. It will not allow me to change the address and will not accept my password or ID questions. I recently upgraded to OSX Yosemite 10.10.1. I also have an Apple ID that works with iTunes and would like to keep it as my primary.

To change the iCloud ID on your devices you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted (if using iOS 7), then sign back in with your current ID.
If you don't know the password for your old ID, or if it isn't accepted, you will have to temporarily recreate it in order to delete the existing account. To do this, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How to spend 0.20 in itunes? I need to change my country and itunes does not allow me because I have 0.20 left to spend. I can't purchase any more credit because I'm not in the US any more and Itunes just accept those. I need help!

I need to change my country and itunes does not allow me because I have 0.20 left to spend. I can't purchase any more credit because I'm not in the US any more and Itunes just accept those. I need help!

Click here and request assistance.
(65879)

NWDS does not allow file change.

Hello friends,
I am developing an Netweaver ISA eCommerce application. I got a problem to change one file of this application. I have opened my NWDS and I changed some files (the activity was created to put the changes) but one of the files that I must change does not accept the modification. I mean, I can not edit that file. If I remove the write protection, the NWDS allows the change, but this way is not correct because the file changed does not go to the activity.
I have already seen this problem before and I solved it through an "edit" command on DTR perspective (right button over the file). But this option is not available at this time.
Can anyone help me?
Thanks!
Rodrigo.

I have found a good way to solve the problem. I removed the DC from client and I created it again. After that, NWDS allowed the file editing.
I do not know why it happened but it seems to be a bug on Developer Studio.
Regards,
Rodrigo.

Hello. I would like to activate my CS3 Educational Program (version 2007) on my new computer. Unfortunatly he is not accepting my serial number. What can I do? I have delated the program on my old computer but it doesn't accept the activation on the new l

Hello. I would like to activate my CS3 Educational Program (version 2007) on my new computer. Unfortunatly he is not accepting my serial number. What can I do? I have delated the program on my old computer but it doesn't accept the activation on the new laptop.

Make sure you are using the correct serial number. Find your serial number quickly
If you did not deactivate the original installation then it is possible your two allowed activations have been used and you need to reset your activation count. To do that you need to contact Adobe Support thru chat and ask them to reset your activations. If you ask for more than that they will tell you they cannot offer you any support.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Error in NWDS Creating activity is not allowed

Hi all,
I received this error and can't use the NWDI fully...
the error message is:
FAILED: Creating activity is not allowed because workspace is not modifiable
all properties in .dtc, .metadata, NWDS folder, and project folders are not set to read only..
where i need to change to work that??
Thanks in advanced!

Hi Bruno Ricciardi,
While creating the project from DTR, did you create the project from Inactive DC's?
You should not create a project from Active Dc's.
Regards,
Jaya.

The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help.

I have a user who's Active Directory password is going to expire. I had her reset her password by going to apple > system prefs > user > and clicking change password. She received the error "The password for the account "account name" was not changed. Your system administrator may not allow you to change your password or there was some other problem with your password. Contact your system administrator for help."
I had her change her password via the kpasswd command in terminal and that changed her password on the server sucessfully however the laptop has FileVault on it. Filevault is not recognizing the new password just the old password.
I have deleted the keychain which didn't resolve and now I am going to decrypt and reencrypt the drive. I'm hoping this is an isolated issue I have over 25 laptops configured like this.

I "think" the trick was unbinding and rebinding the computer account.
After unencrypting and trying to reencrypt Filevault would still not take the new password.
Rebooted the prompt to update the keychain appeared. Updated the keychain. Filevault would still not take the new password.
Unbinded and rebinded the computer account. It worked and let me add the user to filevault.

FM BBP_PD_SC_STATUS_CHANGE Accept Changes activity not allowed

Similar Messages

Maybe you are looking for