FM RSDRC_INFOPROV_READ - Does not give an error neither returns results !!!
Hi,
Our BI system has been upgraded from 3.0 to 7.0 recently. There was a dump in one of the function modules - RSDPL_CUBE_DATA_READ . it was giving an Inherited error exception...
I tried the newer FM RSDRC_INFOPROV_READ in place of that. it works for a particular cube and returns the data alright but for another one it does not return anything in the return table and the sy-subrc is also 0 !!.. there is data in the cube(available for reporting) which satisifies the input restrictions/conditions I have mentioned, so I should ideally see the cube data... No messages can be seen in the message table used inside the function module as well.. Anyone faced such a problem before ???
Only point to make here is that there are several requests in the cube (in green though) whereas another cube which worked had only one. Shouldn't make a difference really right ?
Any comments will be appreciated.
Thanks,
Raj
Hi,
I faced a similar issue a while back. That was due to a inconsistency of the entries in tables i_th_sfc and i_th_sfc, so the fields to be read and returned and the structure of e_t_data. I could fix it with having the same fields and fieldnames here and there.
Siggi
Similar Messages
-
I am unable to update my software in settings, just says an error occured. I am alsos unable to connect to the app and itunes store. (no error message occured) just says unable to connect. I am using cellular data and its turned on. Help me please
Lyndsay237 wrote:
This device does not have a sim card in it. Could this be the reason or am I missing something when I am trying to update.
Yes. You can't update or restore any GSM iPhone without a valid sim card installed in the phone. The sim card need not be activated, but it must be valid & present. If you want to update, you need to get a sim card. -
I dont know know what to do . I wont give me a error code it keeps saying that its missing something. Its not specific! It says the installer package is missing something to keep it from installing. I have downloaded it again and its says the same Dx
It says the installer package is missing something to keep it from installing.
Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
NonLinearFitWithMaxIters does not give correct results for phase
Dear all,
I am trying to fit a sin cuve with NonLinearFitWithMaxIters function of labwindows, but the results given by this function are dispersed a lot (the function does not give same results).
In fact, I have two waveforms signals v and i (of 104 points), and I find the phase between the two signals with NonLinearFitWithMaxIters.
The two singals v and i are measured with an osciloscope.
I use the following fit functions :
v=p1*sin(wt+p2) ;
i=p3*sin(wt+p4) ;
I use the NonLinearFitWithMaxIters function to fit the data and to have the parameters p1, p2, p3, p4. Then, the phase is claculated as follow phase=p4-p3.
The problem is that the phase calculted between the two signals (v and i) is different for each run for the same conditions.
In fact, for a same condition, I measure different times the signals v and i, and I calculate the phase p4-p3, using NonLinearFitWithMaxIters. The goal is to calculate a mean of phases for the same condition. For example, there are cases where the phase=-5 degree, and other cases when phase=12 degree.
For ten measures of v and i, the phase calculated is different. I get a big dispersion between the phases.
I would like to know please why I have a big difference in phases calculated with the same condition?whern using NonLinearFitWithMaxIters.
I read that this function does not give all time the correct results, is there a way to know when the results are not corrects and when they are correct ?
And is there any solution to find accuratly the phase between the two waveforms.
Thank you for your precious answer.The pseudocode which I am using is :
v_err=NonLinearFitWithMaxIters(array_x,array_v,v_y_fit,1252,100,sinus,v_coef,2,&v_mean_squareError);
The fit function is
double sinus(double x, double a[],int noef){
return (a[0]*sin((w*x)+a[1]));
I use the same inital coeficient of v_coef for each run :
v_coef[0]=0.03;
v_coef[1]=0.2;
These coeficient are choosen arbitrary.
In this case, the number of points of the data is 1252 (the data of array_v).
The number of iterations is 100.
For the array_x, the distance between adjacents values of the array is dt=0.4*1e-9(difference between array_x[i] anv array_x[i+1]=dt=0.4*1e-9 ).
for (i=0;i<1252;i++){
array_x[i]=i*(0.4*1e-9);
The means square error returnned by the function when it is complished is small, of the order of 0,001.
I read the help
« From the help:
You must pass a pointer to the nonlinear function f(x,a) along with a set of initial guess coefficients a. NonLinearFitWithMaxIters does not always give the correct answer. The correct output sometimes depends on the initial choice of a. It is very important to verify the final result.
That means that the function cannot be used, as it does not give correct results. How
can we check if the results are good or not ? in my case.
I think that in my case, the function does not give correct results, but how can I check if the results are good, or not ? The mean square error is small. -
When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
The only options offered are "ignore" or "eject"
Disk Utility sees the disc but does not give a repair option.
What can I do?The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
https://www.google.com/#q=raid+backup+mac
Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
Anyway, I am going on and on, yet not really saying anything.
My ideas would not be all that interesting to follow as a backup
plan when matching available newer hardware to task, but you
can get some into better ideas if you are not in a rush. Get a
good setup and then look into more an betterer stuff.
Good luck & happy computing! -
I can't log in to my itunes account, and it does not give me any errors.
I can't log in to my itunes account. When I try, the login screen disappears for a moment. It then pops up requesting I log in. It does not include any error messages.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
Cheers, Tom -
Netctl fails to connect to a wireless network and does not give detail
If I try to connect to a wireless network (WEP, DHCP) using netctl I get "Jon for netctl@wlp2s0\x2dnetworkname.service failed." and two commands (journalctl -xn and systemctl status ...) that should give details about the error.
However, both of them give the following lines:
oct 05 14:44:25 laptop network[422]: Starting network profile 'wlp2s0-networkname'...
oct 05 14:44:30 laptop network[422]: Failed to bring the network up for profile 'wlp2s0-networkname'
oct 05 14:44:30 laptop systemd[1]: netctl@wlp2s0\x2dnetworkname.service: main process exited, code=exited, status=1/FAILURE
oct 05 14:44:30 laptop systemd[1]: Failed to start Networking for netctl profile wlp2s0-networkname.
oct 05 14:44:30 laptop systemd[1]: Unit netctl@wlp2s0\x2dnetworkname.service entered failed state.
Just one line saying that it was trying to connect and four lines repeating the same thing (connecting failed), but it does not give any detail at all.
The netctl profile is:
Interface=wlp2s0
Connection=wireless
Security=wep
ESSID=networkname
IP=dhcp
Key=\"hex-password
Last edited by eduardosm (2014-10-05 14:01:02)MoonSwan wrote:Either this Key=\"hex-password was a typo when you cut & pasted that code or your issue is that you need a closing " symbol. So your line should read: Key=\"hex-password".
If you look at the netctl.profile man page, it explains some special quoting rules at the end. The literal double-quote (or escaped double-quote) actually just results in a non-quoted string when passed from netctl to the underlying supporting software. This is apparently necessary if the WEP key is in hexadecimal. -
The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
My iPad locked after 1 incorrect passcode entry and I tried what a senior advisor told my to do, but it could not download the info unless I entered the correct pass code, which I can not do since it does not give me the opportunity. How do I get the window to enter my pass code?
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Does not print the error message at my behest???
I have a program which works but I want to give appropriate error handling to the user of application.
So basically a simple html page asks for servername, username and password and this is passed onto this .jsp page.
When the correct servername, username and password is entered program is okay but when for example incorrect servername is given it does not print the error message at my behest???????
Here is a ftp page:
<!-- processftplogin.jsp -->
<html>
<head>
<title> FTP Login </title>
</head>
<body>
<%@ page import= "ftp.* " %>
<jsp:useBean class="ftp.FtpBean" id="ftpbean" scope="session" />
<% try
String servername = request.getParameter("servername");
String username = request.getParameter("username");
String password = request.getParameter("password");
ftpbean.ftpConnect(servername, username, password);
catch(Exception e)
out.println("There has been an error with logging into system");
out.println("please check Servername");
out.println("Please check username");
out.println("Please check password");
%>
<h1> You have successfully logged in. </h1>
</body>
</html>Why does it print:
Error: 500
Location: /myJSPs/jsp/grid-portal-project/processftplogin.jsp
Internal Servlet Error:
javax.servlet.ServletException
at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:460)
at jsp.grid_0002dportal_0002dproject.processftplogin_2._jspService(processftplogin_2.java:120)
instead of:
There has been an error with logging into system
Please check Servername
Please check username
Please check passwordman do one thing
first tell me the book u are using for JSP.
cos even i would like to purchase.
u mailed me before
but this time make a good description
of your project write it in a file
then zip it along with your project
source(if possible)...
then in that project report
also give the description of using the JSP tomcat
and all (cos i dont know for windows...or linux)
this will be all... -
How do i delete songs from my iphone when they don't show up in itunes? Swiping across the song on the iphone does not give me a delete button.
Hello audreywisc,
Songs can be removed from your iPhone by tapping 'Songs,' then swiping the song, then tapping Delete.
Remove a song from iPhone. Tap Songs, swipe the song, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud.
iPhone User Guide - Playlists
http://help.apple.com/iphone/8/
Cheers,
Allen -
How do I Restore my iPhoto library from my time machine if it does not give me the restore option?
How do I Restore my iPhoto library from my time machine if it does not give me the restore option?
When I go into my backups and click on the iPhoto library it does not come up with an option to restore it just says open and of course then won't let me open it because it is a back up in time machine? I need these photo very important.Mac Basics: Time Machine backs up your Mac - Apple Support
For detailes TM support post in the forum for your OS rather than the iphoto forum
LN -
I am trying to authorise my new macbook air for i-tunes and it won't let me. I try to de-authorise all the other computers and it says I can only do this once a year and have to wait until the 7th Feb. It does not give me an option to authorise this computer
Always remember to 'de-authorize' you computer when selling or sending for service. If sending for repairs you might not get the same mother board or HD back and some how this counts as an authorized computer against your count.
MJ -
I would like to make an in app purchase using the $20.00 credit that I have on itunes. I am using my i phone5. It does not give me the option of using the credit that I already have, only of using a credit card. How can I use the credt that I already have instead of a credit card?
Is Settings > General > Restrictions > In-App Purchases: ON (green)?
Some In-App Purchases works only with credit card. -
I have had MyWebSearch install itself as my primary browser....I have needed to reset Firefox in safe mode but I am not sure that the changes have actually been done! In Options in the Options menu the window displays all the add on's and features that are on Firefox....I have two zipped folders here One allows me to see inside the other does not. How do I access this one that does not give me the option to as I want to know what is inside...as this "MyWebSearch has been an enormous hassle...and needless to say has compromised my PC and the security of all of my passwords.....I want to be sure that the resetting the browser default has actually worked and that MyWebSearch is gone!
Regards
CocoAre you talking about MyWebSearch toolbar (http://help.mywebsearch.com/sbar2.html#q1) which offers apps such as Smiley Central, Cursor Mania???
If yes, uninstallation instructions are here - (http://help.mywebsearch.com/sbar2.html#q4). Could you provide me some details about the ZIP folders. If I get a screenshot, I can help you very well.
Maybe you are looking for
-
It seems to me that in a previous version of Firefox that one could add a bookmark to the Bookmarks Toolbar and have it stay there. I like to keep things neat and tidy. Now when I delete this bookmark from the Recently Bookmarked list (or the Unsorte
-
I'm opening dinamically some VIs with "Open VI reference" on a FieldPoint 2210. I did it many times with 7.1 and 8.2, but now with 8.6 i get error 1124: LabVIEW: VI is not loadable. In a built application, this error might occur because the VI being
-
My itouch doesn't recognize our wi-fi?
I bought our kids an ITouch. We have an Airport Extreme. The iTouch doesn't recognize the Network. I know it works, however, because it recognizes other networks. My Ipad recognizes our Home Network. What do we need to do?
-
The share operation master file has failed error -1
I can not export. I keep getting this message. Can anyone help me? I am running Final Cut Pro X.
-
Provisioning Allowed and Allow Auto-provisioning YES Role exists No
Hello, I am unable to select the roles while submitting the user provisioning request. The role additional details are set Yes for Provisioning Allowed and Allow Auto-provisioning But Role exists is showing No; i have tried updating the roles in many