Fm to create 2 sheets in xls

hi all,
Is there any fm to create TWO SHEETS in xls file from two internal tables.
regards
vijay

Hi,
Use OLE .
Check this links for sample code:
download to multiple excel sheets
Download to multiple sheets in Excel
Regards
Adil

Similar Messages

  • How to create new Sheet in Excel file and write into it

    Hi to all, my requirement is this:
    I have an excel file (.xls) with multiple sheets (three sheets for precision: sheet1, sheet2 and sheet3).
    I must create in the same excel file new sheet, say sheet4, read data from sheet1, sheet2 and sheet3 and write them into sheet4.
    How to realize this in SSIS?
    Expecially, Is it possible to realize this in SSIS?
    thanks in advance.

    You need to create the sheet with the required metadata. There's no use creating blank sheet.
    Also metadata has to be fixed using a sample sheet prior to start of the package for setting the mapping. You may create a excel template for this purpose to just set the mapping at design time.
    At runtime pass actual excel sheet path for ExcelFilePath property of the source to point to correct file.
    Also the create table statement should include the same metadata info (columns)
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
    Hi, well it works fine! I have used a sample sheet prior to start of the package for setting the mapping.
    Next at run time  pass actual excel sheet path for ExcelFilePath property of the source to point to correct file.
    However I have set also ValidateExternalMetadata properties of the Excel Destination to false and DelayValidation properties of the package to true.
    Now my problem is the following:
    I stored the three sheets name (sheet1, sheet2, sheet3) in the Object type user variable through a script task and the foreach loop loops through the three sheets stored in the variable.
    Now, I want that at each iteration the CURRENT VALUE of the Object type user variable is mapped into another user variable wich in turn is given in input to the Excel Source.
    Resuming:
    -) I have to copy the content of three sheets (sheet1, sheet2, sheet3) of excel file into another new sheet,   sheet4.
    -) I stored the three sheets name (sheet1, sheet2, sheet3) in the Object type user variable.
    -) With a  foreach loop container I loops the three sheets stored in the Object type user variable.
    -) Within a foreach loop container I have a Data Flow Task that transfer data from source sheet (sheet1, sheet2, sheet3) into destination sheet, sheet4.
    -) PROBLEM: how to change dinamically at each iteration of the foreach loop the name of source sheet? In the destination excel Task the sheet is always the same at each iteration, sheet4. But in the source excel task the name of sheet musts change at each
    iteration. In particular at the first iteration the name of the source sheet must be "sheet1$", at the second iteration "sheet2$", in the last iteration "sheet3$".
    How to change sheet name dinamically at each iteration?
    thanks.

  • How can i create  excel sheet with multiple tabs using utl file?

    how can i create excel sheet with multiple tabs using utl file?
    any one help me?

    Jaggy,
    I gave you the most suitable answer on your own thread yesterday
    Re: How to Generating Excel workbook with multiple worksheets

  • Create Excel sheet

    I tried to use the Bi Beans to create Excel sheet using CSV for the current used crosstab, no hope...here is the code i used...
    public void writeExcelFile(DataAccess dataAccess, DataDirector dataDirector){                         
    try{
    PrintWriter out = new PrintWriter(new BufferedWriter(new FileWriter("foo.txt")));
    TextExport exportExcelFile = new TextExport(dataAccess, dataDirector, out);
    exportExcelFile.setExportFormat(exportExcelFile.EXPORT_FORMAT_CSV);
    exportExcelFile.setExportRange
    (exportExcelFile.EXPORT_PAGEDIM_CURRENT);
    exportExcelFile.setLayerMetadataLabelType(
    LayerMetadataMap.LAYER_METADATA_MEDIUMLABEL);
    int []array;
    Object []ob = null;
    array = dataAccess.getLastHPos(DataDirector.COLUMN_EDGE);
    Vector x = new Vector();
    for (int i=0; i<array.length; i++)
    ob[i] = Integer.toString(array);
    exportExcelFile.setExportHPos(new Vector(Arrays.asList(ob)));
    exportExcelFile.export();
    }catch(Exception e){
    when i do open the file created is EMPTY, is there something stupid i did

    Your answer can be found here:
    Re: Webutil.host and space in filename ....

  • Creating Style Sheets for Existing Text

    Can I get some advice on what would be the easiest way to create and apply style sheets to a document that was layed out w/o any? My Art Director layed out a dozen pages of actual type w/o any style sheets. It's a pretty basic layout with Headers, Sub-heads and body copy. There are no "space afters" applied to any of the hard paragraph breaks after sub heads, and nothing has style sheets applied to it. All text has Basic Paragraph applied. I know how to create style sheets based on what he created, but then how would I apply to the rest of the pages w/o having to physically format it all? Thanks for any help with this.

    SIcsempertyrannis schrieb:
    Your flippant response to my question was to send my Art Director for basic computer training. How exactly is that polite or helpful? And if you know the difference between a hard and soft return then why did you ask if I meant shift+return when I clearly stated there were no space-afters applied to any hard paragraph breaks?
    Your initial response was laden with typos and sarcasm, as is your second. If you dont want to be bashed then practice what you preach. Again, and for the last time, if you dont have an answer to a question you should refrain from posting.
    No "space after" does not mean that it is shift-return! The space is depending on the settings of the Paragraph (Style) in Intends and Spacing. And sorry, a lot of people here mean with the same words different things.
    And yes, send your Art Director to a training, because when smeone uses shift-return instead of properly paragraphs he has not enough knowledge to do word processing.
    Thanks for the typos you have found. But you can keep them and all others you will find here. And no, I had no sarcasm.
    I decide myself if I refrain from posting, it is not your job.

  • Creating balance sheet report without using hierarchies

    Hi all,
    Is it possible to create balance sheet report with a fixed layout, without using hierarchies? If yes, how?
    Thanks
    Nitika

    I see....  I guess in that case you shoul use also Cell Definition.  Let me explain you step by step.
    You´ve already created a structure at ROW level.
    1) Create another structure at COLUMN level and name it, for instance, "Balance KF".
    2) Within the new structure, create 1 selection field filtering the apropiate key figure.  Give it an auxiliar name "auxiliar", cause it´s going to be used just for calculations (not visible in queries).
    3) Set properties of this selection as Hidden.
    4) Create 2 new selection filds within the same structure.  Name them but don´t make any selection of characteristics, cause we´re going to assign values with cell option (these are col 1 and col 2 in my previous example).
    5) In the tool bar you will find a "Cells" button.
    6) You have to write formulas en col 1 and col 2 (as you were working in an workbook), making reference to the values in hidden column.  In column 1 make reference to account level values; in column 2 make reference to total level values.
    If you have problems defining reference cells, let me know, but this will solve your issue.
    Regards, Leticia

  • Create new sheets in report with script?

    Is it possible to create new sheets in the report using VBscripts?
    I am writing a script that will create a report with different sheets. The number of sheets in the report will change in each report depending on the number of groups added in the data portal. For example: If there are 3 channel groups in the data portal I will need 3 sheets in the report.
    I searched for the instructions but I could not find how to do it.
    And another question: how can I insert the name of a channel group in the report?
    I am using DIAdem 9.0.
    Thank you very much!

    For all with the same problem: You can copy the Picture an paste it automaticaly in ms word.
    Here my code:
    Call PicPrint("WinClip") ' Copy picture to clipboard
    'open Word document
    ' Start Word via OLE.
      ' Always a new instance of Word will be created.
      Set Word = CreateObject("Word.Application")
      ' Make Word visible. Until now Word was not visible.
      Word.Visible = True
      ' Maximize Word-window.
      Word.WindowState = wdWindowStateMaximize
    ' Create new Word-document based on prepared template.
       AutoDrvLibr="C:\......"    'direction of the Word ducument
       Const DiademWordTemplate = ".....doc"                                'ducument name
       Word.Documents.Add AutoDrvLibr & DiademWordTemplate, false
        ' Maximize document-window.
    call copy_to_Word
    Private Sub copy_to_Word
      Word.ActiveWindow.WindowState = wdWindowStateMaximize
      ' Activate fullpage mode in Word.
      Word.ActiveWindow.ActivePane.View.Zoom.PageFit = wdPageFitFullPage
      ' Set reference to Word-document.
      ' With the help of this reference you can easily acess the Word-document.
      Set WordDoc = Word.ActiveDocument
    Const wdPasteMetafilePicture = &H3
    'Paste picture
      Word.Selection.Range.PasteSpecial , , , , wdPasteMetafilePicture
      Word.Selection.EndKey 5                 'Set Courser to end of page
      Word.Selection.Range.InsertBreak(&H1)   'paste new sheet
      Word.Selection.MoveDown 5,1             'move ohne row down to set the courser to the next page
    end sub

  • How to create PI sheet?

    How to create PI Sheet?

    Hi
    There are plenty of wiki and forum solution on this topic .I would request you to search those items .
    However , following are readily available :
    Process Instruction Sheets (PI Sheets) (SAP Library - Process Management (PP-PI-PMA))
    SAP PPPI Process Instruction Category Page 1 - SAPs'WORD - We SAP For Your Cause
    Regards
    JH

  • Create Contact Sheet II missing

    Hi,
    I'm trying to create a contact sheet in CS4 using <File><Automate><Create Contact Sheet II>
    The trouble is that <Create Contact Sheet II> is missing from the drop-down menu. This is the first time I've tried this since downloading and installing CS4, but I've done it often using CS3.
    How do I find/retrieve this menu option?
    Thanks

    c.pfaffenbichler wrote:
    Please read up on the changes in CS4.
    Contact Sheets can be created in Bridge now.
    Yes but they are not satisfactory for many reasons.
    You can get the legacy plug-ins from the Goodies folder or download them from the Adobe site.
    See http://www.adobe.com/go/kb404900

  • Applescript create contact sheet Error

    Hi all,
    I'm using Applescript to filter my images and create a contact sheet from those filtered images. Now I'm stuck at creating the contact sheet. The error I get is:
    error "Can’t get list of {alias \"Macintosh HD:Users:stopar:Desktop:sorted:OA0001-1.jpg\", alias \"Macintosh HD:Users:stopar:Desktop:sorted:OA0002-1.jpg\"....
    My script looks like this:
    tell application "Finder"
    set sourceFolder to choose folder  -- temporary testing by selecting a folder. File filter script will be placed here
    set filesList to (files of entire contents of sourceFolder) as alias list
    end tell
    tell application "Adobe Photoshop CS4"
    activate
    create contact sheet from files list of filesList
    end tell

    It looks at first glance that you are asking for a list twice… This worked for me… Just tested with a bunch of TIFFs. Put a basic filter in there too.
    tell application "Finder"
    set sourceFolder to choose folder
    set filesList to (files of entire contents of sourceFolder whose file type is "TIFF") as alias list
    end tell
    tell application "Adobe Photoshop CS2"
    activate
    create contact sheet from files filesList
    end tell
    and as if by magik Im back to the other me… again…

  • "Numbers" when creating a sheet the max number of rows is only 255, is this correct because i thorght is was something like 65,000

    "Numbers" when creating a sheet the max number of rows is only 255, is this correct because i thorght is was something like 65,000

    max columns is 255
    max rows should be 65535

  • Creating Contact Sheets by selecting images in sub-folders

    I'm new to scripting, so not sure whether this is within the realms of possiblity, but hope that there's an expert out there up to the challenge!
    My goal is to develop a script to automate the process of creating contact sheets for each pupil of a school photoshoot.  The folder structure being used presently is:
    1st level folder:     School name (e.g. "Southbridge School")
    2nd level folders:     Class teachers name (e.g. "Smith")
    In each 2nd level folder (i.e. representing each class) there are always 3 images per child (post processed, so ready to convert to contact sheets).  The image numbers run sequentially, so the first 3 image numbers in the folder are of the 1st child, the next 3 are of the 2nd child, and so on....
    The script I'm looking for would allow me to point Photoshop to the 1st level folder and then automatically create a contact sheet for all children 'found' in the sub-folders.  To do this the script would need to do the following:
    Taking each 2nd level folder in turn, recognise each 'child' is represented by 3 consecutive images - and starting with the 1st 3 images in the folder create a contact sheet.  Then, move on to the next 3 images in sequence and create the next contact sheet, and finish after it completes the final 3 images in the folder.  Then, move on to the next 2nd level folder...
    Create each contact sheet with the 3 images in colour and then the same 3 images in black and white (so 6 images per contact sheet), including the image number under each and a copyright watermark
    Save all contact sheets generated from all of the classes all together in 1 new folder at the 2nd level called "Contact Sheets"
    Give each contact sheet a unique name in the format "<Class teachers name> - xxx"   (e.g. "Smith-1", "Smith-2" etc...)
    So, are there any Photoshop masters out there up to this challenge?!  Your help would be greatly appreciated because the learning curve on this one looks v. steep!
    Alternatively, if you can think of a better way of doing this I would also be keen to hear!
    Thanks

    Awesome! I didnt even know aperture could do that
    Now another quick question on this topic, if im using RAW files, does aperture need to convert the file to jpeg or tiff (like it does if you export version as jpeg)?
    If it does, that may be a problem as it takes forever for aperture on my macbook to convert raws and save as jpegs, like a good minute or two per photo, and if i have 200odd photos....not good, people will crack it waiting and leave.
    Or does it print as raw? Cause im pretty sure my printer (or any printer) can not print raw files. Will try it tonight on my printer but a heads up will be useful.
    I could just shoot in hi-res jpeg, but id rather shoot raw incase they want a large poster size print etc.
    Thanks.

  • When creating entry sheet,the error raise:purchase order incomplete(parked)

    dear all:
    When I create entry sheet of one po with tcode ml81n,the error raise:purchase order incomplete(parked)message id:se215.
    How to solve this?Thank you!
    maojian

    hi Jian,
    Go into the PO using ME22N, check whether there is any warning message in it.Complete the PO and then only save it.
    Also check whether the PO is to be released,if it is yes then Release it and then create Entry Sheet using ML81N.wrt PO.
    Also check whether you are referencing a park or hold PO.
    Hope it will help you.
    Cheers
    Manoj K Singh

  • Is it possible to create Excel Sheet using OLE automation in App server

    Hi,
       Is it possible to create Excel Sheet using OLE automation in Application server(Open Dataset)
    Thanks in advance...

    Unless your application server is on Windows OS, or it is connected to a Windows server by RFC. What is the requirement exactly, I don't understand?

  • Creating Contact Sheets

    Has anyone had trouble creating contact sheets through Bridge/Elements 8 (Mac)? It is driving me crazy!
    Many Thanks!
    Jennifer

    Can you please specify the exact problem that you are facing here.
    Regards,
    Chhaya

Maybe you are looking for