FM to display switch document

Hi,
I need a FM to display a switch document (like in TA ESWTMON01).
Thanks in advance.
Regards Shiva

Hi Shiva,
you can use Fm ISU_S_IDE_SWITCHDOC_DISPLAY.
Hope that helps.
KR Alexander

Similar Messages

Unable to display customs document in SAP GTS

Hello,
I am using SAP GTS 7.2 Compliance services. SPL and Embargo services are working well (I am not using License determination).
Indeed, when I save a sales order in ERP, it is effectively checked for compliance, as I receive a message when it is blocked by GTS..
In GTS, I can check that concerning business partners are effectively blocked, using:
"Display Blocked Business Partners" and "Display Business Partners with Embargo Situation".
But I cannot display any customs document in SAP GTS, using transaction /SAPSLL/CUHD_DISPLAY (Display all documents) or SAPSLL/CON_BLOCKED_DOCS_EXP (Display blocked documents).
I get the following error message "No data was found for the selection criteria specified".
As I understood, SAP GTS performs the compliance checks not on ERP documents but on corresponding GTS customs document. Thus I guess they are effectively created somewhere! If it was not the case, I guess the process should not work.
When I look in the audit trail of SPL for documents, I can see all the SPL checks that have been performed. Looking in the corresponding table "/SAPSLL/SPLAUD", I can even find the numbers of the different customs documents...
But there is nothing in table "/SAPSLL/CUHD", where they should be copied... The only entries I found concern biling documents that were transferred for customs purposes...
Could you please help me on this matter?
Many thanks,

Hi Sameer,
Thank you for your fast answer. I checked in the debug mode creating a breakpoint at statement RFC and it effectively stops at RFC /SAPSLL/API_6800_SYNCH.
But when I check the log in transaction SLG1, nothing appears concerning /SAPSLL/API_6800_SYNCH.
I think the customs document is effectively created in GTS as I can see it has a number assigned in the audit trail for SPL screening. And compliance services work.
Though when going through the transaction of displaying all documents in GTS there is nothing. Table "/SAPSLL/CUHD" is empty (except some billing documents that were transferred for customs purposes).
This is really weird... Anyway, thank you for your help.
Kind Regards,

Report to display accounting documents

What is the report to display accounting documents
Moderator: Please, avoid asking basic questions

S_ALR_87012287 - Document Journal
S_ALR_87012289 - Compact Document Journal

Is it possible to display the document link for each record in Report ?

Hi,
     Is it possible to display the document or Image link for each master record in the Report with the help of RSA1->Document->Master Data.
Usefull answers are really helpfull.
Advance Thanks for the userful answers.
Regards,
MRC.

Hi JAYASHREE PARASMAL ,
      Thanks for your valuable answers.
      Now i got the document in my Report,while executing the report through query designer as per your suggestion done on Setting Tab option.
      But i can't able to get the same thing,while i executing the Repory through WAD.
      What setting i need follow in the WAD for getting the same thing.
      Kindly give your suggestion to get the document in my Report,while i am executing through my WAD.
      Once again thanks for your helpful answer and awaiting for your suggestion.
Regards,
MRC.

Displaying XML Document in new browser window

Hi,
I have a hyperlink on my page. When I click on it, it will open a new IE window and display xml document.
The new window is displaying some of the xml and at the end displaying the following:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
End element was missing the character '>'. Error processing resource 'http://localhost:28080/benchmark/faces/displayXMLDocu...
However, I cut and paste the xml String where I write it to the HTTPServletResponse to XMLSPY and it displays correctly.
Please let me know.
Rgrds

Here are the steps:
1. I created page1 that has a hyperlink.
2. Hyperlink property are set to display page2 in a new window. (popup).
3. page2.prerender() method, I set the response to the following:
public void prerender() {
javax.faces.context.ExternalContext ec = this.getExternalContext();
HttpServletResponse response = (HttpServletResponse)ec.getResponse();
response.setHeader("Cache-Control","no-cache");
response.setHeader("Cache-Control","no-store");
response.setHeader("Cache-Control","must-revalidate");
response.setHeader("Cache-Control","max-age=0");
response.setHeader("Pragma","no-cache");
response.setHeader("Expires","0");
response.setContentType("text/xml");
response.setBufferSize(5000);
String xmlString = getRequestBean1().getBookingPnrDetailsXML();
try{
xmlString="<?xml version=\"1.0\" encoding=\"UTF-8\"?><root><test1>this is a test</test1><victor>Hello Victor</victor></root>";
PrintWriter out = new PrintWriter(response.getOutputStream());
log(xmlString);
out.print(xmlString);
}catch(IOException io){
System.out.println("" + io.getMessage());
io.printStackTrace();
4.page2.jsp code is the following:
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:ui="http://www.sun.com/web/ui">
<jsp:directive.page contentType="text/xml;charset=UTF-8" pageEncoding="UTF-8"/>
<f:view/>
<ui:page binding="#{displayXMLDocument.page1}" id="page1"/>
<ui:html binding="#{displayXMLDocument.html1}" id="html1"/>
<ui:head binding="#{displayXMLDocument.head1}" id="head1"/>
<ui:link binding="#{displayXMLDocument.link1}" id="link1"/>
<ui:body binding="#{displayXMLDocument.body1}" id="body1"/>
<ui:form binding="#{displayXMLDocument.form1}" id="form1"/>
</jsp:root>
please let me know.
Rgrds.

HT4689 With mission control in Mountain Lion, is there a setting that displays a document name when it is selected?

For example, if I have 4 word documents open, and go to mission control so they are all displayed, can I turn a feature on that displays the document name when my mouse is over each document?
Like in the picture, if I have my mouse over a document, the name of the document isn't displayed. Can I change this?

Hey!
I just got a new mac and was trying to figure out the same thing today!! I went from an older version to this 10.9. I called apple support, the tech had no idea what I was talking about. I was transferred to a manager who told me that it is not feature available on the new models. After a 40 minute conversation I was about to let it go and then I saw this post and became determined LOL ... and I figured it out (SMH apple support). So here is how you do you it:
system preferences > trackpad > you want to make sure the "App Expose" is checked off > and you're done!!
I am not able to upload a 2 photos so I will post a second screenshot of what it looks like once the preferences are set.

How can I display Excel document saved as html in ebDynpro Office Contol?

Hello,
I have a problem with displaying of Excel document saved as html inside WebDynpro Office Control.
Could you explain why OfficeControl cannot display Excel document with content type =text/htm?
How you know, control must be bound to binary data. And then mime type is set as
bin.setMimeType(new WebResourceType("html", "text/html", false));
The empty document is displayed always.
Nevertheless, excel file is displayed perfect, when
bin.setMimeType(new WebResourceType("xls ", "application/msexcel", false));

The OfficeControl UI element is made available as an ActiveX control, so that the UI element can be displayed in browsers that support ActiveX controls.
The ActiveX control enables display of the following documents:
1.Microsoft Word documents with the doc file extension
2.Microsoft Excel documents with the xls file extension
This is the reason why document with other content types are not displayed.
Data source must be bound to binary data because files are read as bytes in this scenario.
Hope this helps you.
Do let me know if your problem is solved.
Regards,
Vijith

How to display a document content in a JSP page

Hi friends,
I am trying to display a document's content in a JSP page after user authentication.For that I mapped a jsp file with extension ".sens" in Content Management SDK manager,and put the file in the directory '/ifs/jsp-bin' of webstarterapp,but it is not working.Please help me to solve the probleb as earliest.
Regards
Prasenjit

under view put a new tag
<f:view>
<ui:script url="page.js"/>
and thats it

How to display a document content in JSP page

Hi friends,
I am trying to display a document's content in a JSP page after user authentication.For that I mapped a jsp file with extension .sens in Content Management SDK manager,and put it the file in the directory '/ifs/jsp-bin' of webstarterapp,but it is not working.Down I am giving the code snippet,please help me.I need this to be done fast.
<HTML>
<HEAD>
<%@ page contentType="text/html;charset=windows-1252"%>
<%@ page import="oracle.j2ee.connector.Login" %>
<%@ page import="oracle.ifs.adk.filesystem.IfsFileSystem"%>
<%@ page import="oracle.ifs.adk.http.HttpUtils"%>
<%@ page import="oracle.ifs.beans.LibrarySession"%>
<%@ page import="oracle.ifs.beans.DirectoryUser"%>
<%@ page import="oracle.ifs.beans.PublicObject"%>
<%@ page import="oracle.ifs.beans.Document"%>
<%@ page import="java.io.*"%>
<jsp:useBean id="login" scope="page" class="oracle.j2ee.connector.Login">
<TITLE>FileExtension.jsp</TITLE>
</HEAD>
<BODY BGCOLOR="SILVER">
<%
String theDisplay = "initialized";
String theHidden = "initialized";
boolean theAdminRights = false;
try
login = (Login) request.getSession(true).getValue("IfsHttpLogin");
LibrarySession ifsSession = login.getSession();
IfsFileSystem ifsFile = new IfsFileSystem(ifsSession);
DirectoryUser du = ifsSession.getDirectoryUser();
String path = HttpUtils.getIfsPathFromJSPRedirect(request) ;
PublicObject po = ifsFile.findPublicObjectByPath(path);
if(po instanceof Document)
Document doc =(Document) po;
InputStream in= ifsFile.getDocumentContent(doc);
int i=in.read();
while(i!=-1)
out.write(i);
in.close();
out.flush();
out.close();
theAdminRights = du.isAdminEnabled();
theDisplay = po.getAttributeByUpperCaseName("DISPLAY").toString();
theHidden = po.getAttributeByUpperCaseName("HIDDEN").toString();
catch (Exception e)
e.printStackTrace();
%>
Here is some static content.
<P>
The Display Value: <%= theDisplay %>
<P>
<%
if (theAdminRights)
%>
The Hidden Value: <%= theHidden %>
<%
%>
</jsp:useBean>
</BODY>
</HTML>

these may help you.
Google map integration to EBS

Using cl_gui_textedit, text blocks always display prior document.

We have two containers and we're using two instances of cl_gui_textedit.
On the first call to the text screen, we see the two texts that we should see.
The user saves the data and backs out to the selection screen, which contains an ALV display of documents.
The user selects the next document to process. During initialization, we attempt the FREE destructor but it does not destroy the text editor ref to cl_gui_textedit. We can initialize with clear and free as ABAP statement. Upon entry to the PBO, we can see that we have forcibly cleared the ref to cl_gui_textedit. It's 0: INITIAL for both text editors. We watch the table being built and the internal tables contain the correct text. After our set read_only true or false, we get a beep, and then arrive at our text screen without any error message.
What is on the screen at that point will be the texts from the prior document. We've tried inserting lifetime parameters for our custom container. We've tried CALL METHOD cl_gui_cfw=>flush (which appears to always be necessary in PAI when we get the unprotected portion and the indices, etc.). Neither of these alter the behavior of the screen and the erroneous content of the text editor blocks.
Question: is there a method or something that anyone can suggest to "force" the text blocks to contain the data that was in the table, rather than the data that was in the table for the prior transaction?

Did you try calling the method DELETE_TEXT of the CL_GUI_TEXTEDIT before setting up the next text.
This is how I get rid of the existing text:
* Delete the Text
me->o_editor->delete_text( ).
* Set the new text
me->o_editor->set_textstream( EXPORTING text = iv_text ).
Regards,
Naimesh Patel

Upload and display Word Document in WD application

Hello,
I have a WD ABAP appl. where the user wants to upload an Word / Excel file (from its own local drive).
The document shall be saved in SAP and it shall also be possible to display the document later in the WD application.
I implemented the UI element upload in the view, to determine the path of the document.
For the display implemented the UI element Office control.
1. When i browse the document, the properties data, filename and mime type are filled into the bound context elements of the upload UI.
2. The property datasource of the UI office control I bound to the same context element, that is also bound to the property data of the upload UI.
The office control opens a word document, but the document is empty.
Is it possible that the document is not uploaded correct?
In another application I did an upload for a PDF doc.. There I implemented the following coding as action of the button 'Upload'.
data lo_nd_pdf type ref to if_wd_context_node.
data lo_el_pdf type ref to if_wd_context_element.
data ls_pdf type wd_this->element_pdf.
data lv_pdf like ls_pdf-pdf.
navigate from <CONTEXT> to <PDF> via lead selection
lo_nd_pdf = wd_context->get_child_node( name = wd_this->wdctx_pdf ).
get element via lead selection
lo_el_pdf = lo_nd_pdf->get_element( ).
get single attribute
lo_el_pdf->get_attribute(
exporting
name = `PDF`
importing
value = lv_pdf ).
Get a reference to the from processing class.
data: l_fp type ref to if_fp.
l_fp = cl_fp=>get_reference( ).
Get a reference to the PDF Object class.
data: l_pdfobj type ref to if_fp_pdf_object.
l_pdfobj = l_fp->create_pdf_object( ).
set the pdf in the PDF Object
l_pdfobj->set_document( pdfdata = lv_pdf ).
set the PDF Object to extract data the Form data.
l_pdfobj->set_extractdata( ).
execute call to ADS
l_pdfobj->execute( ).
get the PDF Form data
data: pdf_form_data type xstring.
l_pdfobj->get_data(
importing
formdata = pdf_form_data ).
convert the xstring from data to string so it can be processed using the iXML classes
data: converter type ref to cl_abap_conv_in_ce,
formxml type string.
converter = cl_abap_conv_in_ce=>create( input = pdf_form_data ).
converter->read(
importing
data = formxml ).
pull in the iXML type group.
type-pools: ixml.
get a reference to iXML object
data:l_ixml type ref to if_ixml.
l_ixml = cl_ixml=>create( ).
get iStream object from StreamFactory
data: streamfactory type ref to if_ixml_stream_factory,
istream type ref to if_ixml_istream.
streamfactory = l_ixml->create_stream_factory( ).
istream = streamfactory->create_istream_string( formxml ).
create an XML document class that will be used to process the XML
data: document type ref to if_ixml_document.
document = l_ixml->create_document( ).
create the parser class
data: parser type ref to if_ixml_parser.
parser = l_ixml->create_parser( stream_factory = streamfactory
istream = istream
document = document ).
parse the XML
parser->parse( ).
define XML Node type object
data: node type ref to if_ixml_node,
attributes type ref to if_ixml_named_node_map.
get the psi sales data Node and value.
data ls_psi_sales type wd_this->element_psi_sales.
data: lt_dfies type table of dfies,
ls_defies type dfies.
call function 'DDIF_NAMETAB_GET'
exporting
tabname = 'ZCM_PSI_SALES'
ALL_TYPES = ' '
LFIELDNAME = ' '
GROUP_NAMES = ' '
UCLEN =
IMPORTING
X030L_WA =
DTELINFO_WA =
TTYPINFO_WA =
DDOBJTYPE =
DFIES_WA =
LINES_DESCR =
tables
X031L_TAB =
dfies_tab = lt_dfies
exceptions
not_found = 1
others = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
data: lv_fieldname type string.
field-symbols <fs_field> type any.
loop at lt_dfies into ls_defies.
lv_fieldname = ls_defies-fieldname.
node = document->find_from_name( name = lv_fieldname ).
assign component lv_fieldname
of structure ls_psi_sales
to <fs_field>.
if <fs_field> is assigned.
<fs_field> = node->get_value( ).
endif.
endloop.
WRITE DATA INTO CONTEXT
data lo_nd_psi_sales type ref to if_wd_context_node.
data lo_el_psi_sales type ref to if_wd_context_element.
navigate from <CONTEXT> to <PSI_SALES> via lead selection
lo_nd_psi_sales = wd_context->get_child_node( name = wd_this->wdctx_psi_sales ).
get element via lead selection
lo_el_psi_sales = lo_nd_psi_sales->get_element( ).
set all declared attributes
lo_el_psi_sales->set_static_attributes(
exporting
static_attributes = ls_psi_sales ).
Do I need such a code also to upload a word doc?
Which interface / class exists for word documents? (for PDF upload there is the interface IF_FP)
How can I save a document in SAP? (as MIME Object? with which method?)
I hope someone can help me!?
BR

You can use the fileupload and filedownload uielements.
Check these links:
[File Upload|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/b3/be7941601b1d09e10000000a155106/content.htm]
[File Download|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/09/a5884121a41c09e10000000a155106/content.htm]
When you upload a file and save in SAP, are you saving it as xstring.
If yes follow these steps for filedownload.
Follow these steps for file download:
1 Create FileDownload uielement in your View
2.Create an Attribute of type xstring.
3.Bind this attribute to the data property of your Filedownload uielement.
4. during fileuplaod as you are saving the document in xstring format, fetch the same from your database table and pass the value to filedownload i.e set the attribute bound to data property of filedownload uielement with the xstring content.

When display switches off I can't get it back without forced restart

When display switches off due to low battery power & I can't get it back even when I plug in to the mains and have to force the PC to restart.
Is there a pref somewhere to disable this?

Hello
When the display goes off exactly? How much capacity has battery at this time? 5%? More?
Try to set this to higher level.
When you work with your notebook and battery level comes to low battery level and the alarm alert will be shown in task bar but you will be able to continue your work several minutes or to connect AC power supply.
I am afraid your notebook reaches critical battery level and then is maybe too late for any action.
Set Low battery level to 10% and when the notification is shown connect AC adapter immediately.
I presume the display must not be off at all.

How to display error documents in selection screen level

Hi,
Currently Iam doing Smartforms for journal voucher. Iam taking multiple documents as input and displaying relavent item data for each.
Now, my requirement is i want to display invalid document numbers at selection screen level. For example there are 30 invalid document number i want to display them before start-of-selection.
Thanks in advance,
Regards,
Chinna..

i have a query......say i am using a selet-options s_ebeln for ekko-ebeln.
i want to display error messages for
1>lower limit cant be greater than upper limit?
2>for special cahracters given in the select-options fields.....etc...
now when i am writing the code......
if s_ebeln-low gt s_ebeln-high.
message e001.
it is showing SAP's message not mine.
but ....if my s_ebeln-high field is 0.
then my message is showing.
pls give me the codes for these?

Switch Document not created

Hi,
Need some suggestion for the below concern.
I am trying to created switch document in IS U system from BOR Object i.e. ISUSWITCHD. But switch document is getting created with Error. I have checked the datex process is configured and updated for the service provider.
But, while monitoring switch document it is giving Error - Datex process not found for 0985 (¿?) and G0230
Note: Here 0985 (Service Provider) and G0230 (Distributor).
Thanks.

Hi,
Check the following
1. All the message type in the external system are correct.
2. Check the Outbound idoc queue and take the idoc no and enter in WE02 Dispaly
and check the reasons for the error
Regards
Ganesh

Display a document library view on a subsite

Hi
I have SharePoint 2013 On-Premise and I would like to display a document library from the top level site in a subsite. This subsite will then be saved as a template and used to create other subsites.
For example,
I have a site called Site 1. In Site 1 there is a document library called doclib1. Site1 also has a subsite called subsiteA.
I would like to display a view from doclib1 in subsiteA. SubsiteA will then be used as a template to create subsiteB, subsiteC etc.
I have tried a few things but these have not worked or I am not doing it correctly. Here is what I have tried
Copied doclib1 code from site1 to subsiteA using SPDesigner. I get the error "List does not exist......"
Used a Content Query Webpart. I get the error "Something went wrong"
Used a Data view web part. The complete page was displayed. I only want the view
Although it looks possible, I do not know how to take this forward. All I need is to display generic documents on each subsite that can be modified from one location.
Marc Collins www.QGate.co.uk

Hi,
To get the custom field in the search filter. You need to follow these steps.
Go to the Search schema from the Manage Service Applications -> Search Service Application in Central Administration
Create a Managed property for your field (Category)
Map the crawl property to the Managed property.
Once managed property created, run the full crawl.
Once full crawl executed, you are able to get your filter property in the search filter.
http://blogs.perficient.com/microsoft/2012/07/sp2013-search-quickie-createmap-a-new-managed-property-powershell/
Even though 2010 article, for 2013 steps are same.
http://johnrossjr.wordpress.com/2011/03/18/creating-custom-managed-properties/
Please mark it answered, if your problem resolved or helpful.

FM to display switch document

Similar Messages

Maybe you are looking for