FM to get the date specific structural help
I am working on structural help for Org id for a selection screen parameter.
I am using FM RH_OBJID_REQUEST. It is giving the structure valid ion today. My requirement is to get the structure valid on given period in the above selection field.
Please let me know is there any other way(other FM) to get the date specific structural help.
Pass your dates to ORGBEG & ORGEND
Description
This parameter only applies to the search function.
The parameters ORGEND and ORGBEG together determine the period in which
the organizational assignment data for positions is read. The entry in
ORGBEG specifies the start of the search period.
Value range
Allowed values are all dates smaller than the date in ORGEND.
Default
The default value is the smallest system date.
Function Module
^Saquib
Similar Messages
-
I have purchased a newer mid 2011 iMac for my wife to replace her dead 17"iMac from 2006. It was running Snow Leopard. The new iMac has Yosemite and when I go into Migration Assistant it tells me that the OS X is too old, implying that I cannot get the data from it. How can I migrate this data to the new iMac? I have the hard drive removed and in an external enclosure connected to the new iMac.
Thanks,
Bill StratmanSince any OS since Lion does not support Rosetta or PPC applications, you may want to check her apps for compatibility.
Have you tried to follow all the instructions here:
OS X Yosemite: Transfer your info from a computer or storage device
Also, as a general note: when you got the 2011 iMac did it have the original OS installed as required by the SLA? The seller is to remove any OS version obtained at the app store since the license is not transferable - did he do that? If not, as the OS download is tied to the Apple ID used to obtain it, you will not be able to update apps or reinstall the OS, so may I suggest you do this step now before you start porting over all the files. Use Internet Recovery: Hold Command + Option + R while restarting/rebooting until you see a spinning globe and a progress bar. After 2 - 10 minutes, you'll be connected to Apple's servers and see a Utilities window. Go to Disk Utility and choose erase your drive; once finished, go back to the window and choose to reinstall OS X. This should install a fresh original OS version which you can then update and tie to your wife's Apple ID. -
Not able to get the data from synchronous Webservice To BPEL process
Hi All,
My requirement is : Third party has some webservice.They are pushing data to that Webservice(Wsdl).
Third part WSDL example : http://ipaddress:port/name/Service.svc?wsdl ( This is just example format of their WSDL)
After that I need to get that data into my BPEL process and update my system.
When I built My Snchronous BPEL process I imported third party WSDL(http://ipaddress:port/name/Service.svc?wsdl) through 'import WSDL' in dialog.After that I automatically got the (request and response schema elements) parameters from that WSDL.I gave input and output of the BPEL process from those elements.
I pasted that third party URL iin SOAPUI and I got their operations and schemas.Based on that I had choosen the elements for 'input' and 'output' of the BPEL processes.I am also getting the schema structures in 'Assign' or 'Transform' activity.
I built the whole process.
I have the Process.
Now Client is pushing data to their WSDL(http://ipaddress:port/name/Service.svc?wsdl) as it is their data pushing interface.But that data is not coming to my BPEL process and instance is not being created in EM console.
As I have imported their WSDL into my BPEL process,I need to get the data.But I am not getting the data.
Is there any problem in MY BPEL process?
(or)
DO I need to use 'Webservice' Adapter in 'Exposed Services' Swimlane in Composite Editor to have the third party URL, so that they Can push the data to that WSDL in turn that data comes into my BPEL process?
Can anybody help me this case?
once again my requirement is :
Client pushes the data through their WSDL url -----> I need to get that data into MY BPEL process --> I have my own WSDl to take that details into my system.I will explain the requirement in small paragraph:
There are two applications.One is our application(X) and another one is third party application(Y).
I need to update in my application(X) based on data coming from application(Y).
I am using SOA as a middle tier to have communication between Y and X.
(Ex: if they send some info like event type 'event1' from Y ,I need to update that 'event1' data in my X application)
The work at third party application is :
According their info,They will push data from their end to their WSDL( http://ipaddress:port/name/Service.svc?wsdl ).
They are telling they can only send the data to their WSDL( http://ipaddress:port/name/Service.svc?wsdl ).
They will not consume our BPEL process(I think they might be wrong at this point of time).They have one WSDL to send or push the data from their end.
The work at from our side(SOA & X application)
From that point ,our BPEL process has to receive that data and update that data into my application(X).
I hope You understand my requirement.
Can you guide me through how to achieve this task as they are telling they have to use their WSDL to push the data?
(or)
Do I need to take 'Webservice' adapter into Exposed Services Swimlane in Jdeveloper to have their webservice(third party WSDL),If it is So Can you tell me the details how to take 'input' and 'output' for BPEL process?
(or)
Can YOu suggest me to talk to them to consume my BPEL process directly?
Thanks
Edited by: 899283 on Aug 17, 2012 4:55 AM -
HI Guys,
In the BEX reports for the rows used the date and in the columns i have created a structue using the selections based on the KF. i have used the 29 KF in the structure. My problem i want to dispaly the data by spliting the key figures from 1-15 and 16-29 in the WAD for the tables and graphs
i did the settings for the tables as followed and getting the data correctly
Display data from value column = 1
Display data to value column = 15.
i want to apply the same settings for the graph.
Please help me where i need to do the settings for the series(legends).
Thanks,
Visu
Edited by: visu rao on Apr 9, 2008 5:45 PMHi Visu,
In Chart, you cannot have such option. You should have two same queries as such with 1 to 15 KF's in one query and 16 to 29 KF's (with structures) in second query with all other similar fields. Now use these two queries in two different charts with 15 categories in first chart and the other 14 categories in second chart. You can have the categories what ever you want... U just need to maintain in the query in the structure, the number of KF's... and the same number of categories in chart.
You can have the categories and series count in "Edit chart-->Wizard and Chart designer".
Assign points if this helps u...
Regards,
KK. -
I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?
LukaPetranovic wrote:
Hello anita4323.
I hope this will help you with your problem:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
Let us know if you succeeded or need any further help.
I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible. -
How do I get the date of a file in an FTP?
As stated in the subject.
I am at wits end trying to get the date of a file from FTP(Stuck for days).
I tried the "URLConnection" Class but could only get me the size of the file with "getContentLength()"
"getContentDate()" & "getLastModified()" both give me a 0. They only works for files on HTTP but not FTP.
Anyone has any simple solution on how to get the date of a file on FTP?
Thanks in Advance.The FTP specification has long awaited the magical file meta-data access protocol, which never came. There is no FTP defined manner to obtain the date of a file. The common work-around is to get the containing directory list and <shudder> parse the format of the returned text for the target file and date. Since there is no standard directory listing format, there is no guarantee that you will be able to get that date, and your application would have to cry to the user for help.
Some FTP applications, in addition to providing parsers for Unix/Linux and DOS/Windows directory list formats, also provide the user with a format definition script to parse whatever the user encounters.
I hope you find this of some help. -
We are upgrading from 8.3 to 9.2. How can i get the table(record) structure changes between these 2 versions. I am not able to find it in Oracle support.
My guess is you want to upgrade HR8.3 to 9.2 - and that is not one jump upgrade. You will need to go HRMS 83 to 90
(PeopleSoft Enterprise HRMS 8.3x to 9.0 Upgrade (Doc ID 747333.1) and then 90 to 92 (PeopleSoft Human Capital Management 9.0 to 9.2 Upgrade Home Page (Doc ID 1536087.1)
Each these MOS pages contains the Demo to Demo Compare Reports that show the data structures changes between the releases.
Hope it helps. -
RFC to get the data from HR Infotypes
Hi,
We have a requirement to get the data from infotypes for a particular personnel number. Can anybody tell me the RFC for extracting the data from the infotypes?
Thanks in advanceHi Shaikh,
Here are few more which got missed out:-
BAPI_EMPLCOMM_GETDETAIL - Communication infotype - infotype 0105
BAPI_INTCONTROL_GETDETAIL - Internal cont - infotype 32
BAPI_PDOTYPES_GETDETAILEDLIST - PD infotypes
BAPI_ABSENCE_GETDETAIL - infotype 2001
BAPI_W4W5INFOUS_GETDETAIL - W4/W5 info of an emp - infotype 210
BAPI_DATESPECS_GETDETAILEDLIST - Date specifications -infotype 41
RFC_ABSENCETYPES_READ - RFC which Lists absence types
HR_BEN_READ_CREDIT_PLANS - RFC for reading credit plans
HR_BEN_READ_INSURE_PLANS - RFC for reading insurance plans.
HR_BEN_READ_HEALTH_PLANS_RFC RFC for Reading Health plans
Hope this helps.
Kindly reward if useful.
Regards & Thanks,
Darshan Mulmule -
DataSource 0CRM_SRV_PROCESS_H is not getting the data in infopackage
Hi Masters,
I have to upload the data from the datasources 0CRM_SRV_PROCESS_H and 0CRM_SRV_PROCESS_I into Infopackages, but when i execute the infockage it shows
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
In CRM system when i checked it in RSA3 it is showing the data.
I checked the older posts but i havn't find any answer post. I also checked the SAP note 692195, but it is applicable for 4.0. I am working on 7.0.
Please suggest something so that I can get the data into infopackage.
Thanks and Regards,
Vicky.Hi Lokesh,
Thanks for your reply.
Actually i am working on such a project where they don't give SAP_ALL authorization to any user. If we need any authorization we need to show them particular SAP note of same version in my case it is CRM 7.0. If you know any note on CRM 7.0 which gives all the authorization objects required or it says we need SAP_ALL authorization please tell me.
It will be very help full for me to get the authorization.
Regards,
Vicky. -
I am not getting the data in Bex from the cube
Hi Experts,
i am not getting the data from the cube to Bex,
cube having the data, but i am not able to see this data in the Bex result area.
Can any one help me.
Best regards,
BhaskarHi
In the manage cube, is reporting symbol is there for your requests
If you have any red requests delete them and refresh
If all requests having reporting symbols you may check the BEx without any filters or selection criterions
Regards
N Ganesh -
Iam not getting the data on screen after using the user exit zxpadu01
Dear Freinds
As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008. -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn. --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.Hi Pranesh,
i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
i0008 like p0008,
l_v_ANSAL type ANSAL_15,
l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti. -
Unable to get the data from the stored procedure
Hello Folks,
I have this stored procedure and am trying to get the data from the table stage_bill but for some reason i am not sure its not pulling the data.Am a beginner in pl/sql Can any one please help to find out. I can give the code below.
create or replace procedure Load_FADM_Staging_Area_TEST(p_data_load_date date) is
-- local variables
v_start_date date;
v_end_date date;
-- cursor starting
CURSOR c_get_data
IS
SELECT
a.batch_id
,a.beginning_service_date
,a.bill_id
,a.bill_method
,a.bill_number
,a.bill_received_date
,a.bill_status
,a.bill_type
,a.change_oltp_by
,a.change_oltp_date
,a.client_datafeed_code
,a.client_id
,a.created_date
,a.date_of_incident
,a.date_paid
,a.deleted_oltp_by
,a.deleted_oltp_date
,a.duplicate_bill
,a.ending_service_date
,a.event_case_id
,a.event_id
,a.from_oltp_by
,a.oltp_bill_status
,a.review_status
,'HRI' schema_name
, sysdate Load_date
,'ETLPROCESS001' Load_user
,v_start_date as Row_Effective_Date
,null Row_End_date
from stage_bill a
where
--created_date >= to_date('20101031 235959', 'YYYYMMDD HH24MISS')
created_date >= v_start_date
and
--created_date <= to_date('20101111 235959', 'YYYYMMDD HH24MISS')
created_date <= v_end_date
and not exists
(select
b.batch_id
,b.beginning_service_date
,b.bill_id
,b.bill_method
,b.bill_number
,b.bill_received_date
,b.bill_status
,b.bill_type
,b.change_oltp_by
,b.change_oltp_date
,b.client_datafeed_code
,b.client_id
,b.created_date
,b.date_of_incident
,b.date_paid
,b.deleted_oltp_by
,b.deleted_oltp_date
,b.duplicate_bill
,b.ending_service_date
,b.event_case_id
,b.event_id
,b.from_oltp_by
,b.oltp_bill_status
,b.review_status,
b.schema_name,
b.Load_date,
b.Load_user,
b.Row_Effective_Date,
b.Row_End_Date
from STG_FADM_HRI_STAGE_BILL_TEST b)
-- cursor o/p variables
v_batch_id stage_bill.batch_id%TYPE;
v_beginning_service_date stage_bill.beginning_service_date%TYPE;
v_bill_id stage_bill.bill_id%TYPE;
v_bill_method stage_bill.bill_method%TYPE;
v_bill_number stage_bill.bill_number%TYPE;
v_bill_received_date stage_bill.bill_received_date%TYPE;
v_bill_status stage_bill.bill_status%TYPE;
v_bill_type stage_bill.bill_type%TYPE;
v_change_oltp_by stage_bill.change_oltp_by%TYPE;
v_change_oltp_date stage_bill.change_oltp_date%TYPE;
v_client_datafeed_code stage_bill.client_datafeed_code%TYPE;
v_client_id stage_bill.client_id%TYPE;
v_created_date stage_bill.created_date%TYPE;
v_date_of_incident stage_bill.date_of_incident%TYPE;
v_date_paid stage_bill.date_paid%TYPE;
v_deleted_oltp_by stage_bill.deleted_oltp_by%TYPE;
v_deleted_oltp_date stage_bill.deleted_oltp_date%TYPE;
v_duplicate_bill stage_bill.duplicate_bill%TYPE;
v_ending_service_date stage_bill.ending_service_date%TYPE;
v_event_case_id stage_bill.event_case_id%TYPE;
v_event_id stage_bill.event_id%TYPE;
v_from_oltp_by stage_bill.from_oltp_by%TYPE;
v_oltp_bill_status stage_bill.oltp_bill_status%TYPE;
v_review_status stage_bill.review_status%TYPE;
v_schema_name varchar(50);
v_Load_date date;
v_Load_user varchar(50);
v_Row_Effective_Date date;
v_Row_End_Date date;
Begin
if p_data_load_date is null then
select (sysdate - 7), (sysdate - 1) into v_start_date, v_end_date from dual;
elsif p_data_load_date is not null then
select (p_data_load_date - 7), (p_data_load_date - 1) into v_start_date, v_end_date from dual;
else
raise_application_error('-20042', 'Data control - GetDataControlAuditData : Date parameter must be a date of this or a previous week.');
end if;
-- cursor c_get_data loop begin
OPEN c_get_data;
LOOP -- cursor c_get_data loop begin
FETCH c_get_data
INTO
v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
V_Row_Effective_Date,
v_Row_End_Date;
EXIT WHEN c_get_data%NOTFOUND;
insert into STG_FADM_HRI_STAGE_BILL_TEST
batch_id
,beginning_service_date
,bill_id
,bill_method
,bill_number
,bill_received_date
,bill_status
,bill_type
,change_oltp_by
,change_oltp_date
,client_datafeed_code
,client_id
,created_date
,date_of_incident
,date_paid
,deleted_oltp_by
,deleted_oltp_date
,duplicate_bill
,ending_service_date
,event_case_id
,event_id
,from_oltp_by
,oltp_bill_status
,review_status
,schema_name
,Load_date
,Load_user
,Row_Effective_Date
,Row_End_Date
values(
v_batch_id,
v_beginning_service_date,
v_bill_id ,
v_bill_method ,
v_bill_number,
v_bill_received_date,
v_bill_status,
v_bill_type,
v_change_oltp_by,
v_change_oltp_date,
v_client_datafeed_code,
v_client_id,
v_created_date,
v_date_of_incident,
v_date_paid,
v_deleted_oltp_by,
v_deleted_oltp_date,
v_duplicate_bill,
v_ending_service_date ,
v_event_case_id ,
v_event_id,
v_from_oltp_by,
v_oltp_bill_status,
v_review_status,
v_schema_name,
v_Load_date,
v_Load_user,
v_Row_Effective_Date,
v_Row_End_Date ) ;
COMMIT;
END LOOP;
CLOSE c_get_data;Maybe you need something else, like
CREATE OR REPLACE PROCEDURE load_fadm_staging_area_test (
p_data_load_date DATE
) IS
v_start_date DATE;
v_end_date DATE;
BEGIN
SELECT NVL (p_data_load_date, SYSDATE) - 7,
NVL (p_data_load_date, SYSDATE) - 1
INTO v_start_date,
v_end_date
FROM DUAL;
MERGE INTO stg_fadm_hri_stage_bill_test b
USING (SELECT *
FROM stage_bill
WHERE created_date BETWEEN v_start_date AND v_end_date) a
ON (b.bill_id = a.billl_id)
WHEN NOT MATCHED THEN
INSERT (batch_id,
beginning_service_date,
bill_id,
bill_method,
bill_number,
bill_received_date,
bill_status,
bill_type,
change_oltp_by,
change_oltp_date,
client_datafeed_code,
client_id,
created_date,
date_of_incident,
date_paid,
deleted_oltp_by,
deleted_oltp_date,
duplicate_bill,
ending_service_date,
event_case_id,
event_id,
from_oltp_by,
oltp_bill_status,
review_status,
schema_name,
load_date,
load_user,
row_effective_date,
row_end_date
VALUES (a.batch_id,
a.beginning_service_date,
a.bill_id,
a.bill_method,
a.bill_number,
a.bill_received_date,
a.bill_status,
a.bill_type,
a.change_oltp_by,
a.change_oltp_date,
a.client_datafeed_code,
a.client_id,
a.created_date,
a.date_of_incident,
a.date_paid,
a.deleted_oltp_by,
a.deleted_oltp_date,
a.duplicate_bill,
a.ending_service_date,
a.event_case_id,
a.event_id,
a.from_oltp_by,
a.oltp_bill_status,
a.review_status,
'HRI',
SYSDATE,
'ETLPROCESS001',
v_start_date,
NULL
END load_fadm_staging_area_test;Whenever you code a cursor and a loop, ask yourself. Do I need that?
Regards
Peter -
Not able to get the data on the page
hi,
I tried brining the data on the JSP page. I am passing the parameters to a PL/SQL procedure. but I am not getting any data or error. can anyone helpme how to proceed further I am retreving the page parameters that are passed to the JSP page like this.
<%
PortletRenderRequest portletRequest = (PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
RenderContext rc = portletRequest.getRenderContext();
PortletDefinition pd = portletRequest.getPortletInstance().getPortletDefinition();
%>
I am getting the page parameters. but I am not able to get any result on the page.
while I am using the same code to get the data on another JSP page I am getting the data except I am not retreving the page parameters.
I am using the code like this to pass the parameters to the procedure.
OracleConnection conn__OCI = cpool.getProxyConnection(OracleOCIConnectionPool.PROXYTYPE_USER_NAME, proxUserProp);
cstmt = conn__OCI.prepareCall ("begin test.test1( ?,?,?,?,? ); end;");
cstmt.setString(2, cnumb);
cstmt.setString(3, cperiod);
cstmt.setInt(4, retStrC);
cstmt.setString(5, retStr3);
cstmt.registerOutParameter (4, Types.NUMERIC);
cstmt.registerOutParameter (5, Types.VARCHAR);
cstmt.registerOutParameter(1, OracleTypes.CURSOR);
cstmt.execute();
retStrC = cstmt.getInt (4);
retStr3 = cstmt.getString (5);
retStr = "<tr class=OraDataText><td> " + retStrC + "</td></tr>";
retStr = retStr + "<tr class=OraDataText><td> " + retStr3 + "</td></tr>";
if ( retStrC == -1 ) { ALLretStr = ALLretStr + retStr; }
else
cursor = ((OracleCallableStatement)cstmt).getCursor(1);
while (cursor.next ())
if (spacerLine >= 2)
ALLretStr = ALLretStr + "<tr><td colspan=5 height=1 <div id=ssubLine> <div id=ssubLinet></div> </div> </td></tr>";
ALLretStr = ALLretStr + "<tr class=smmjWipAltText><td ALIGN=LEFT>" + cursor.getString(1) + "</td><td ALIGN=CENTER>" + cursor.getInt(2) + "</td><td ALIGN=CENTER>" + cursor.getString(3) + "</td><td ALIGN=CENTER>" + cursor.getString(4) + "</td><td ALIGN=RIGHT>" + cursor.getString(5) + "</td></tr>";
spacerLine++;
}Hi Frank,<br>
<br>
I am getting a blank page after hitting the submit button. can you help me finding a solution for this in the JSP page or tell me where the error is. <br>
<br>
<%@page contentType="text/html;charset=UTF-8" %><br>
<%@page import="oracle.portal.provider.v2.render.*" %><br>
<%@page import="oracle.portal.provider.v2.render.PortletRenderRequest" %><br>
<%@page import="oracle.portal.provider.v2.PortletDefinition" %><br>
<%@page import="oracle.portal.provider.v2.http.HttpCommonConstants" %><br>
<%@page import="java.sql.*, javax.sql.*, java.util.*, oracle.jdbc.*, <br>
oracle.jdbc.pool.*, oracle.jdbc.oci.*" %><br>
<br>
<%<br> PortletRenderRequest portletRequest = (PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);<br>
RenderContext rc = portletRequest.getRenderContext();<br>
PortletDefinition pd = portletRequest.getPortletInstance().getPortletDefinition();<br>
%><br>
<%! String tree_descrip;<br> String tree_descrip_long;<br>
String curr_Scheme;<br>
String overl_gif;<br>
String curr_css_path;<br>
// page param<br>
String p_number_val= "1";<br>
String p_period_val= "Day";<br>
%><br>
<%<br> String long_desc = "LONG";<br>
String Descrip = "SHORT";<br>
String treeDescrip= "%SUBMISS%OLDER%";<br>
String curr_treeCateg = "SUB";<br>
try<br>
{<br>
curr_Scheme = getInfo.getSchem.getSchem();<br>
overl_gif = "/images/tested/"+curr_Scheme+ "images/prefreshdefault.gif";<br>
curr_css_path = "/images/tested/" curr_Scheme "css/param_jsp.css";<br>
tree_descrip = getInfo.getPortletTitle.getPortletTitle ( Descrip , treeDescrip , curr_treeCateg);<br>
tree_descrip_long = getInfo.getPortletTitle.getPortletTitle ( long_desc , treeDescrip , curr_treeCateg);<br>
}<br>
catch(Exception e)<br>
{<br>
tree_descrip = "";<br>
tree_descrip_long = "";<br>
}<br>
%> <br>
<% // Get page param p_number_val try { p_number_val = request.getParameterValues("p_number")[0]; } catch(Exception e) { p_number_val = "1"; } <br>
// Get page param p_period_val try { p_period_val = request.getParameterValues("p_period")[0]; } catch(Exception e) { p_period_val = "Day"; } %> <br>
<HTML> <HEAD> <link href="<%= curr_css_path %>" rel="stylesheet" type="text/css" media='' screen=''/> <SCRIPT LANGUAGE="JavaScript1.1" SRC="/images/smmj_page_obj/Popup/overlib.js"></SCRIPT> </HEAD> <BODY>
<TABLE WIDTH=100% summary="<%= tree_descrip %>" border="0" cellspacing="0" cellpadding="3" BGCOLOR="#FFFFFF" > <TR WIDTH="100%" height="6px"><td height="6px" COLSPAN="6" ></td></TR> <TR WIDTH="100%" > <td ALIGN="LEFT" nowrap ></td> <td ALIGN="LEFT" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS"> CYCLE NAME</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">ID</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">FIRM NAME</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">BILLING PERIOD</td> <td ALIGN="RIGHT" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS0">AGE</td> </TR> <%= getOlderSubs( p_number_val, p_period_val , "dev", portletRequest.getUser().getName(), "close_connect") %> </table> <TABLE><TR><TD> <%=p_number_val%>
<%=p_period_val%> <br>
<%=portletRequest.getUser().getName()%> </TD></TR> </TABLE> </BODY> </HTML> <br>
<%!<br> private String getOlderSubs( String cnumb, String cperiod, String cstring, String userid, String cState) throws SQLException
{<br>
CallableStatement cstmt;<br>
ResultSet cursor;<br>
int spacerLine = 1;<br>
int retStrC = 1;<br>
String retStr = "f";<br>
String retStr2 = "f";<br>
String retStr3 = "f";<br>
String retStr4 = "f";<br>
String ALLretStr = " ";<br>
String TempretStr = " ";<br>
String userstring = getInfo.getPortlUser.getPortUsr("B", "1");<br>
String pwstring = getInfo.getPortlUser.getPortUsr("B", "2");<br>
String CNNstring = getInfo.getPortlUser.getPortUsr("B", "3");<br>
String PROXY_user_name = "test$" + userid;<br>
//String PROXY_user_name = "test1$roger" ;<br>
String url= "jdbc:oracle:oci:@" + CNNstring;<br>
Properties prop = new Properties();<br>
try {<br>
if ( userid.trim().toUpperCase().equals(getInfo.getCONN.chkPortal.trim().toUpperCase()) )<br>
{<br>
ALLretStr = "<tr><td>Default user: " + userid + "</td></tr>"; }<br>
else<br>
{<br>
// Create an OracleOCIConnectionPool instance with default configuration
OracleOCIConnectionPool cpool = new OracleOCIConnectionPool(userstring, pwstring , url, null);<br>
Properties proxUserProp = new Properties();<br>
proxUserProp.setProperty(OracleOCIConnectionPool.PROXY_USER_NAME, PROXY_user_name);<br>
OracleConnection conn__OCI = cpool.getProxyConnection
(OracleOCIConnectionPool.PROXYTYPE_USER_NAME, proxUserProp);<br>
cstmt = conn__OCI.prepareCall ("begin PORT_CURSOR.s_submission_wip( ?,?,?,?,? ); end;");<br>
cstmt.setString(2, cnumb);<br>
cstmt.setString(3, cperiod);<br>
cstmt.setInt(4, retStrC);<br>
cstmt.setString(5, retStr3);<br>
cstmt.registerOutParameter (4, Types.NUMERIC);<br>
cstmt.registerOutParameter (5, Types.VARCHAR);<br>
cstmt.registerOutParameter(1, OracleTypes.CURSOR);<br>
cstmt.execute();<br>
retStrC = cstmt.getInt (4);<br>
retStr3 = cstmt.getString (5);<br>
retStr = "<tr class=OraDataText><td> " + retStrC + "</td></tr>";<br>
retStr = retStr + "<tr class=OraDataText><td> " + retStr3 + "</td></tr>";<br>
if ( retStrC == -1 ) { ALLretStr = ALLretStr + retStr; }<br>
else<br>
{<br>
cursor = ((OracleCallableStatement)cstmt).getCursor(1);<br>
while (cursor.next ())<br>
{<br>
if (spacerLine >= 2)<br>
{<br>
ALLretStr = ALLretStr + "<tr><td ALIGN=LEFT nowrap ></td><td colspan=5 height=1 ></td></tr>";<br>
}<br>
ALLretStr = ALLretStr + "<tr WIDTH=100% class=smmjPort2Text >
<td ALIGN=LEFT nowrap ></td><td ALIGN=LEFT> " + cursor.getString(1) + "</td><td ALIGN=CENTER>" + cursor.getInt(2) + "</td><td ALIGN=CENTER>" + cursor.getString(3) + "</td><td ALIGN=CENTER>" + cursor.getString(4) + "</td><td ALIGN=RIGHT>" + cursor.getString(5) + "</td></tr>";<br>spacerLine++;<br>
}<br>
}<br>
if (cState != null )<br>
{ //return(retStr);<br>
if (conn__OCI != null) conn__OCI.close();<br>
if (cpool != null) cpool.close();<br>
}}<br>
return(TempretStr);<br>
}<br>
catch (SQLException e )<br>
{<br>
String retErrStr = retStr + " SQL Error: <PRE> " + e + " </PRE> \n";<br>
return(retErrStr);<br>
}<br>
}<br>
%><br>
Regards,<br>
Vijay. -
How to get the data from Pooled Table T157E.
Hi Experts,
How to get the data from Pooled Table T157E.
Any help.
Thanks in Advance,
Ur's Harsha.create some internal table similar to T157E and pass all data as per SPRAS.
After that use internal table in your program as per the requirement.
Regds,
Anil -
How to get the data of Open Opportunities and Closed Opportunities
Hi Guys,
i'm studying about Sales Opportunities in SAP BusinessOne.
i'm able to get the data about Sales Opportunities(i enterd), Opportunities Report and Lost Opportunities.
But i dont know how to get information about Open Opportunities Reports and Closed Opportunitiesn Reports.i'm unable to find even their names of tables.
plz send a reply.................
with regards,
santhThanq Alexey for ur Helpful Answer,
i'm aware about execution of a query in the Query Analyzer of SQL Server.but i dont know how to move to ShowDebugInformation Menu.
can i find it in the SAP Business One Tool. or do i need
to check any data base help given by B1(Ex:- REFDB2004).
plz give answer for this also............
with regards,
santh
Maybe you are looking for
-
How do I get my widgets to come up on my desktop not on a new screen
how do I get my widgets to come up on my desktop not another screen
-
Idoc for transfer order creation for outbound delivery
Hi I am using idoc basic type WMTOID01 and message type WMTORD. when i am trying to create TO for delivery. the idoc is creating and TO ia also creating but, this is not linking to delivery. I am using mov type 601 and requirement type PICK and doc t
-
Hi can anyOne tell is there any software/framework life jsf but it has drag n drop feature like .NET. and one more suggestion plz... which framework is hot in the market... and easy/soon to learn... I m an scjp, scwcd, scbcd having good knowledge in
-
T520 - Win7 Ent - UEFI - GPO Enabled to allow Bitlocker enhanced pin, but windows refuses it
Before I start -- I'm not sure if this is a windows issue or a lenovo issue, but had to start somewhere. I have installed our standard image of Windows 7 enterprise using Microsoft Deployment Toolkit on a new T520. The drive is configured for and OS
-
Cannot load organizer in PSE or Photoshop Premiere elements 8
My computer crashed and from that point on, I cannot load the organizer. I have spoken to support, which did not rectify the problem. Just purchased elements 8 and am very disappointed. Can anyone help?