FMS not working when only item chaning is drop down.

I'm having an issue on 2005A where I have a FMS in place the sets a date if another field changes. 
Sent: Y/N (Drop Down Box)
Dt: FMS to set to date if sent = Y
The issue is this, if you open the sales order and do nothing else but drop down sent and set to Y the FMS does not fire.
After it is set to Y, you change it to N then change to Y it works.
If you alter any field anywhere else first, then change the sent to Y it works.
Has anyone else experienced this ?  Is there a work around?
Eli

UDFs (Marketing Documents)
U_Extract:  Values Y - Yes, N - No.  Default = (N)
U_ExtDate: Datefield.
FMS Query:
IF $[ORDR.U_Extract] = 'Y'
select getdate()
FMS is set to Auto Refresh when U_Extract changes.
Open the sales order and do nothing but click the drop down for U_Extract, change to Y, update... NOTHING.
Change any other field, then choose the drop down and select Y and it works.
Thanks,
Eli
Edited by: Eli Lawson on May 12, 2009 4:18 PM

Similar Messages

  • My start up tone doesn't work, trackpad and keyboard do not work consistently. I get a drop down menu when I try to click on something

    Out of nowhere my keyboard locked, trackpad didn't work and start up chime stopped working.  Then, I got drop down menus when I tried to click on something, and now my computer is working fine.  In a while it will happen all over again.  How can the keyboard work fine and then stop?  Then be fine again.  I am not technically inclined, so please help.  I have a MacBook Air. Thanks

    To add a Pinterest icon to your Home Screen do the followiing:
    In Safari:
    Go to the Pinterest Website - http://pinterest.com
    Touch the Share icon at the top (looks like a box with an arrow coming out)
    Touch Add to Home Screen

  • Server Group not working when one of Job Servers is down

    I have a Server Group of two job servers. They have the same version 12.2.2.3 and are attached to the same Local Repository of version 12.2.2.0.
    When I execute a batch job (from the Designer) and explicitly specify on which job server it should run, it works fine for either job server. Also, when I specify Batch Job execution on Server Group, it works fine.
    However, when I shutdown one of the Job Servers, and then try to execute the job on Server Group, I'm getting two error messages, BODI-1111011 that one Job Server is down, and BODI-1111009 that another Job Server has failed.
    At the same time, when I check the Server Group in the Management Console, it shows that the allegedly failed Job Server is in the status green.
    That error is not reflected in a job server eveng log, nor there is anything written to webadmin log, not in the job trace (the latter isn't created at all).
    Is there anything I can do at this point except raise a support message?

    The issue was with different users for Local Repository in Admin and Job Server config. I discovered it when trying to run the job from Admin Console. Designer is probably not the best diagnostic tool for such kind of issues.

  • Help! Javascript not working when object moved from one page to another!

    Hello all:
    I am new to Adobe Livecycle Designer (version 8.0). I have created a 3 page interactive pdf form with numerous objects (text fields, radio buttons, drop-down boxes, etc.), that our business wants to begin using soon.
    I am having difficulty with some of my Javascript not working with a few of my objects on page 2 of the form. Specifically, there is a drop-down box for "Country" on page 2 of my form. When the user selects, for example, "United States" from the list, I have Javascript that is supposed to change the "Currency" drop-down box rawValue to "US Dollars" accordingly (upon the change event).
    I think my Javascript syntax is proper, but I am not certain. Here is my simple Javascript associated with the "Country" drop-down box (Note: rawValue 80 = "United States" and rawValue 105 = "US Dollars"):
    form1.Page1.cmbContactInfoCountry::change: - (JavaScript, client) -
    if (this.rawValue == 80) {     
         cmbCurrency.rawValue = 105;
    This seems pretty straight forward and it WORKS when my "Country" drop-down box is moved to page 1 of the form, but it WILL NOT WORK when I move the "Country" drop-down box back to page 2 of the form (which is where it belongs).
    Does anyone have any suggestions or solutions? I have spent probably 6-8 hours racking my brain trying to figure out why it works when on one page, but it does not work when move to a different page. I am guessing that I may have corrupted something OR that I am not fully addressing the proper name of the object?
    Please help!
    Frustrated and helpless near Chicago!
    Taylor T

    Hi Jono:
    Thank you for your quick reply.I was able to obtain the full name of the cmbCurrency object using the method you taught me. That is brilliant! Great short-cut tool.
    Unfortunately, I am still having issues with getting Javasript for the cmbCountry object to work with the cmbCurrency object. I haved pasted my new Javascript below.
    JavaScript for cmbCountry object:
    //UNITED STATES
    if (this.rawValue == 1) {
              xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 1;
    else
    //CANADA
    if (this.rawValue == 2) {
              xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 2;
    I have checked the "Specify Item Values" checkbox of the cmbCurrency drop-down object and Value 1 = "US Dollars" and Value 2 = "Canadian Dollars".
    When I select "Canada" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object is changed to "US Dollars" (when it is clearly defined as "Canadian Dollars"). When I select "United States" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object stays blank for uknown reasons. Very strange.
    Since I am not able to further explain in detail on what I am experiencing, I have posted a link to my file below (I just signed up for an account at ShareFile). I would forever be indebted to you if you can help me figure this out!
    https://thomptk.sharefile.com/?cmd=d&id=07ede2fe11db4549

  • Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    How do I set up a mail group on mac mail?  All the advise on line seems to refer to 'address book' and I only have 'contacts'.  The guidance does not work when using 'contacts' - can anyone help me?

    Create a group and send mail
    http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
    http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
    Best.

  • Appstore is not working , when  i am trying to download new item appstore is not responding.yesterday onwards am facing this issue

    appstore is not working , when  i am trying to download new item appstore is not responding.yesterday onwards am facing this issue

    I assume you have gone through the basics
    ie. switch to wifi connection, restart the phone, restore the phone?

  • My ipod nano FM radio does not work it only has European band and japan band and when you search to find a radio station I cant hear anything. Help please!!

    my ipod nano FM radio does not work it only has European band and japan band and when you search to find a radio station I cant hear anything. Help please!!

    Hi kahli:
    Have a look at  http://manuals.info.apple.com/en_US/iPod_nano_5th_gen_UserGuide.pdf
    AND
    http://manuals.info.apple.com/en_US/iPod_nano_5th_gen_UserGuide.pdf

  • The wi-fi is working but I get I grayish screen when I use safari.  The touch screen is also not working but only on safari (well internet).  How do I fix that?

    Good day,
    I get a grayish screen when I access internet via my Ipad.  The touch screen is also not working but only with internet.  How do I fix that?
    thank you
    mélanie

    I have the same problem! Can anyone help us? Thanks!!

  • The built-in dictionary on my iPad only works with certain sites.  What do I need to do so that I can it all the time. (For example, it does not work when I read e-newspaper.)

    What do I need to do so that I can use the built-in dictionary all the time? My iPad 2's dictionary functions on Japanese e-newspapers but not on the Arizona Republic or other e-newspapers.

    Rikirannu wrote:
    My iPad 2's dictionary functions on Japanese e-newspapers but not on the Arizona Republic or other e-newspapers.
    Are you talking about the English dictionary?  Mine seems to work ok on the AZ republic web page.  Does yours not work on all webpages?  Does it not work when you type an English word in Notes and then do select and define?

  • WHEN i UPDATED TO 4, THE GOOGLE DROPDOWN DOES NOT WORK WHEN I CLICK ON THE ITEM I WANT TO GO TO LIKE IT DID WITH THE OLD VERSION.

    I INSTALLED 4 AND NOW WHEN I TYPE IN THE GOOGLE SEARCH AND AN ITEM IN THE DROP DOWN IS CHOSEN, IT DOES NOT GO TO THAT LINK. THE FEW LETTERS I HAVE TYPED IS ALL THAT SHOWS UP IN THE BOX AFTER I CLICK THE ITEM IN THE DROP DOWN.

    Can I change back to the older version of Firefox

  • Screen variant not working when assigned to transaction variant in SHd0

    Dear All,
    User requires tax code column for line items in MIRO to be made non-editable. I am using SHD0 transaction for the same. I am able to make the column grey-off by creating screen variant. The program is SAPLMR1M and screen number 6310. When tested individually thru SHD0 the variant is working perfect. But it is not working when assigned to a transaction variant. Any clues on the same would be really helpful.
    Thanks in advance
    Komal

    Hi,
    Try to record again for the whole set of screens instead of doing that for the individual tax screen and only for the tax screen make the required field disable.
    Once done and saved, you can see all the screens variants in the transaction variant.
    Use the Change WITH PROCESSING OPTION.
    Hope this solves your problem
    Regards
    Shiva

  • Reply to all using ItemReply does not work when specifying messageid

    Hello everyone,
    I am trying to use the ItemReply token to perform a "Reply to All"
    action on a mail item with a known message identifier and include the
    original message text in the response. According to the documentation,
    the call should be:
    ItemReply(7;1;"message-id")
    Still, when I execute this token, apparently only a normal reply action
    is performed because only the original sender is listed as recipient.
    (The message text is properly included)
    However, when I manually select the message in the GroupWise client
    first and then execute the same call without specifying the message id,
    all recipients of the original mail are listed in "To:" as expected:
    ItemReply(7;1)
    Could it be that the "ReplyTo" parameter is ignored or does not work
    when a message id is specified as parameter? (Setting "IncludeText" to 0
    does not change anything)
    Thanks in advance and best regards,
    Peter Hofer

    Worth bumping this message. I find the exact same behaviour as mentioned 5 years ago. Using both GW8 and GW2012.
    According documentation, when MessageId is not specified it defaults to the command ItemReplyOpenItem(). I assume that the reason "Reply To all" works without a MessageID is because of that. Someone needs to give a look to ItemReply().

  • The touch screen is not working when I am in the Music app of my iPod Touch.  How do I get it to begin working?  It just stopped today.

    The touch screen is not working when I am in the Music app of my iPod Touch.  How do I get it to begin working?  It just stopped today.
    Does anyone know what I can do?  I am unable to switch screens, and I can not see the track that is playing.  The only was I can switch between songs is to use the controls on my headphones.

    Try the stamdard fixes to rule out a software problem:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod.

  • Why Dynamic Parameter is not working, when i create report using stored procedure ?

    Post Author: Shashi Kant
    CA Forum: General
    Hi all
    Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
    Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
    is not shown to me when i referesh the report for viewing the results.
    I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
    ============================================================================================
    1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
    Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
    Dynamic Parameters in Action
    My question is that whether dynamic parameter is working with storedprocedure or not.
    When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
    One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
    Please reply soon , it's urgent
    Regards
    shashi kant

    Hi Kishore,
    I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
    expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
    =lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
    As to the second issue, please try to use the following expression:
    =Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
    Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl  file with all the size properties to us by the following E-mail address?  It is benefit for us to do further analysis.
    E-mail: [email protected]
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for