FMS to copy employees firstname and lastname to UDF

I created an UDF and linked the following FMS:
SELECT firstName, lastName FROM OHEM
This correctly shows me a list with all employees. If I select one it puts the firstname to my UDF only. What do I have to add to put the firstname and the lastname into my UDF?
Thanks
Franz

HI
Use Like this :
SELECT T0.[firstName]' ' T0.[lastName] FROM OHEM T0
So it will combine the First name & Last name . link with ur FMS(Use Plus Symbol after firstname(Before Quotation & after quotation) .. Forum is not posting the plus symbol
Giri
Edited by: Giri dharan on Jan 5, 2010 7:16 PM

Similar Messages

Incomplete profile page: Where are firstname and lastName?

Hi,
How to retrieve the firstname lastname in Webcenter Portal (11.1.1.8) UserProfile object, we used all the expressions but firstname lastname always comes blank/empty.
First Name: #{webCenterProfile[securityContext.userName].firstName} 
Middle Name: #{webCenterProfile[securityContext.userName].middleName} 
Last Name: #{webCenterProfile[securityContext.userName].lastName} 
I use Open DS as the LDAP and the first attribute in LDAP is cn and the lastname attribute is sn, we want to get the values of these when we call #{webCenterProfile[securityContext.userName].firstName}.
I found one archived thread where the same question is asked but without any solution documented.
Incomplete profile page: Where are firstname and lastName?
Thanks,
Anshuman

Hi,
Add an "HTML Markup" Layout Component to a page.
Edit the "HTML Markup" Layout Component.
In the Display options Tab, click the Edit Icon (v) next to the Value Property and select "Expression Builder...".
Select "Type a value or expression" and enter the following:
User Profile Information:
 
Name: #{webCenterProfile[securityContext.userName].name} 
Display Name: #{webCenterProfile[securityContext.userName].displayName} 
First Name: #{webCenterProfile[securityContext.userName].firstName} 
Middle Name: #{webCenterProfile[securityContext.userName].middleName} 
Last Name: #{webCenterProfile[securityContext.userName].lastName} 
Maiden Name: #{webCenterProfile[securityContext.userName].maidenName} 
Name Suffix: #{webCenterProfile[securityContext.userName].nameSuffix} 
Initials: #{webCenterProfile[securityContext.userName].initials} 
 
Description: #{webCenterProfile[securityContext.userName].description} 
Date of Birth: #{webCenterProfile[securityContext.userName].dateofBirth} 
Home Address: #{webCenterProfile[securityContext.userName].homeAddress} 
Home Phone: #{webCenterProfile[securityContext.userName].homePhone} 
Wireless Acct Number: #{webCenterProfile[securityContext.userName].wirelessAcctNumber} 
 
Time Zone: #{webCenterProfile[securityContext.userName].timeZone} 
Default Group: #{webCenterProfile[securityContext.userName].defaultGroup} 
Preferred Language: #{webCenterProfile[securityContext.userName].preferredLanguage} 
Update Date: #{webCenterProfile[securityContext.userName].updateDate} 
 
Employee Number: #{webCenterProfile[securityContext.userName].employeeNumber} 
Title: #{webCenterProfile[securityContext.userName].title} 
Department: #{webCenterProfile[securityContext.userName].department} 
Organization: #{webCenterProfile[securityContext.userName].organization} 
 
Date of Hire: #{webCenterProfile[securityContext.userName].dateofHire} 
Employee Type: #{webCenterProfile[securityContext.userName].employeeType} 
Expertise: #{webCenterProfile[securityContext.userName].expertise} 
Organizational Unit: #{webCenterProfile[securityContext.userName].organizationalUnit} 
Manager Display Name: #{webCenterProfile[securityContext.userName].managerDisplayName} 
 
Business Email: #{webCenterProfile[securityContext.userName].businessEmail} 
Business Phone: #{webCenterProfile[securityContext.userName].businessPhone} 
Business Mobile: #{webCenterProfile[securityContext.userName].businessMobile} 
Business Pager: #{webCenterProfile[securityContext.userName].businessPager} 
Business Fax: #{webCenterProfile[securityContext.userName].businessFax} 
Business Street: #{webCenterProfile[securityContext.userName].businessStreet} 
Business City: #{webCenterProfile[securityContext.userName].businessCity} 
Business State: #{webCenterProfile[securityContext.userName].businessState} 
Business Postal Code: #{webCenterProfile[securityContext.userName].businessPostalCode} 
Business Country: #{webCenterProfile[securityContext.userName].businessCountry} 
Business PO Box: #{webCenterProfile[securityContext.userName].businessPOBox} 
 
Click Test and confirm there are no errors.
Click OK to Exit the Expression Builder.
Click OK to exit Edit of the HTML Markup Layout Component.
This should display the user profile information as displayed on the user profile in WebCenter Spaces.

In XML Show Form display Creator FirstName and LastName ?

Hi all,
In XML Form Builder i want to display the creator FirstName and LastName ( Diamond Admin) in the Show Form.
For egs:
Logon ID: diamond_admin
Last Name: Admin
First Name: Diamond
In the EDIT Form By using $sap_user and also createdBy property i'm getting the creator name as diamond_admin but i want to display the FirstName and LastName (Diamond Admin).
2)In the EDIT Form i used the Label for Time Based Publishing(TBP)
Opening Date = TimeStamp control
Closing Date = TimeStamp control
In the RenderList Form i'm showing the Closing Date label its display the date and time.
Closing Date= 05/12/08 08:00:00 PM
But i requirement is to show the closing date only not time(Closing Date= 05/12/08) in the RenderListItem Form..
How to do this?Please help me...
Regards
Thillai J

When you are editing the Show Form, select the correct label in the form and in the property list area (bottom right) you have a property named "Display As". Select "Display Name" for the value.
Make sure that in your Data Model your property has the data type "user"
The "Display As" parameter should also work for your date problem as you can select "Short" to only display the date.

UCM Search using firstname and lastname

Hi,
One of our requirement is to enable the search using firstname and lastname. We store users, groups, roles, and accounts in Oracle Internet Directory and integrated with UCM. I would like to know the ways to show firstname and lastname fields in the search so that users can search with those properties instead of author metadata .
Thanks,
Raj

If I got the question, first name and last name refer to first and last names of document authors, right? Otherwise, I miss the link between search for documents and people identities in an identity pool.
Note that search dialogs support "wild-characters" - that is, you can enter "Jiri Mac*" instead of "Jiri Machotka" - alternatively, use "Contains" rather than "Equals To" criteria.
Furthermore, I'm wondering how you intend to use first and last names in GUI - do you prefer to have two names that you somehow construct together? Do you want to display the names to users? (How many names will be in first names? How many in last names?)

Newbie: how to get account firstname and lastname in SIM

I have the following xpres code that retrieves all the account ids in SIM - this is working. However, how can i get the firstname and lastname of all of the returned account Ids. Some code example will be appreciated:
<invoke name='getUsers' class='com.waveset.ui.FormUtil'>
<ref>:display.session</ref>
</invoke>

Is this in a form or a workflow? If a form, you'll probably want to use the getObject FormUtil method. Also, there's a bunch of useful methods on the actual LocalSession object represented by display.session - look in the javadocs to see what you can do...
Not hugely useful I know, but pretty hard to suggest options with (a lot) more context...
This is an example of using getObject from a UserForm - you would replace the <select> statement with the accountId of your target users returned from getUsers (probably using a dolist to iterate the result set), and replace fullname with firstname and lastname:
 <block>
 <defvar name="requestorObj">
 <invoke name='getObject' class='com.waveset.ui.FormUtil'>
 <ref>:display.session</ref>
 <s>User</s>
 <select>
 <ref>requester</ref>
 <ref>WF_CASE_OWNER</ref>
 </select>
 </invoke>
 </defvar>
 <concat>
 <invoke name="getAttribute">
 <ref>requestorObj</ref>
 <s>fullname</s>
 </invoke>
 <s> [</s>
 <get>
 <ref>requestorObj</ref>
 <s>accountId</s>
 </get>
 <s>]</s>
 </concat>
 </block>

ActiveSync not updating firstname and lastname

Hi All,
i am using FlatFileActiveSync. Using that i am able to create the accounts with details specified in .csv file. but if i change the first name annd lastname value in the .csv file and run the ActiveSync, Updation is not happening only for these attributes. The rest all the attributes are updating properly. Please check my below code for updating the firstname and lastname.
 <set name='global.firstname'>
 <ref>activeSync.firstname</ref>
 </set>
 <set name='global.lastname'>
 <ref>activeSync.lastname</ref>
 </set>Please help on this, it is really eating my time.
Regards,
Sabareeswaren.

Hello,
Did you check workflow trace ? Does it show, value assigned to firstname variable, when IDM starts execution of workflow ? check the variable name, and its case. If you get value for last name then first name should not be problem.

How do I switch Firstname and Lastname in the adressbook on an iMac?

How do I switch firstname and lastname in the adressbook on my iMac?
Thanks, for helping me. Monika

Go to Address Book>Preferences and on the General tab select from the drop down menu 'Sort by: Last name'.

Customization query on EPM workspace login name to Firstname and Lastname

Hi Gurus,
Question:
Our User would like to see Welcome Firstname Lastname once they login at Top Right corner of the workspace. Currently, it shows login name i.e., if user login as admin, the workspace welcome message would show as Welcome Admin.
Any inputs on achieving this i.e., javacode or API would be greatly appreciated.

Hi Krishna,
Here are the 2 options:
1) As Lars mentioned, Persist the column you want in your table and use your filter. Or
2) Keep filters on both Last Name and First Name separately.
I.e Instead of Filtering with Full Name = 'KrishnaTangudu',
Use Filters as Match(lastname,*inputparameter*) AND Match(firstname,*inputparameter*)
Expression Editor of Projection in Calculation View:
Match(lastname,*Inputparameter*) AND MATCH (firstname,*inputparameter*)
And check the Viz Plan, if this actually helps you to push down your filter condition.
Regards,
Krishna Tangudu

Update FirstName,MiddleName and LastName of Contact Employee of BP via DI

Hi,
Iam using SAP BOne 8.8 SP:00 PL15 and i need to add a BP using DI and i also need to add Conatct Person information for that BP. But the FirstName,MiddleName and LastName Fields of the contact person is not exposed through the DI.
Is there any way to add or update those fields through ( FirstName,MiddleName and LastName ) DI
Thanks & Regards
Rejish

If it's not exposed to the DI, you can not do it with the DI or DTW so it will have to be done through the application

How to retrive firstname,middlename and lastname in a table

Hi all,
Please can u help me anyone.
example:
EMP table
Ename column
ramesh sachin tendulkar
vara prasad
bala
how to display firstname,middlename,lastname in a emp table using oracle 9i.
firstname middlename lastname
ramesh sachin tendulkar
vara prasad
bala
Thank in advance

Something like this perhaps?
SQL> ed
Wrote file afiedt.buf
1 with e as (select 'ramesh sachin tendulkar' as ename from dual union all
2             select 'vara prasad' from dual union all
3             select 'bala' from dual)
4 --
5 -- END OF TEST DATA
6 --
7 select substr(ename,1,decode(instr(ename,' '),0,length(ename),instr(ename,' '))) as firstname
8        ,substr(ename,instr(ename,' ')+1,length(ename)-instr(ename,' ')-(length(ename)-instr(ename,' ',-1))) as middlename
9        ,substr(ename,decode(instr(ename,' ',-1),0,length(ename)+1,instr(ename,' ',-1)+1)) as surname
10* from e
SQL> /
FIRSTNAME               MIDDLENAME              SURNAME
ramesh                  sachin                  tendulkar
vara                                            prasad
bala
SQL>If you upgraded to 10g or 11g it would be easier as you could use regular expressions.

Way to Copy Doc,Due and Posting Date from Sale Document to Other Sale Doc

Hey SAP B1 Community,
Most of the users facing Problems When they create Sale Order and then want to create Del and Invoice Doc. They have to Change Doc and Del Date, There is solution to avoid to write dates again.
First Create UDF with the name ie "DDate", in DDate udf write FMS which get the Date From $[ORDR.DocDate]
in Del and Invoice Form Create FMS for Del and Document Date which get Value form UDF "DDate"
It ll decrease the time to Post Del and Invoice.
Rahil Hassan
0300-4655753

this method is to avoid current date
when
they use "Copy to" Delivery and then Copy to Invoice the system fills

Is there a way to remove a password from a Document? We have a form that an ex employee created and didn't reveal the password to anyone before he left

We have a document that a former employee created and password protected. He left without revealing the password to anyone and now we need to make changes to the form. Is there a way to remove the security?

Hello Kelly,
if you can't negotiate a private agreement, there is no possibility to recover this document. Then the only way is, that you copy the contents or create a new one according to your wishes.
Hans-Günter

Photos. They are on my macBook, backed up on time machine. Copied them (hours and hours) to external hard drive. They are now in alphabetical order (19,000 of them) NOT IN THEIR EVENTS or date order-and have been taken with different cameras- help!!!!!!

Photos.
They are on my macBook, backed up on time machine. There are 19,000+ of them, some rescued from a pc crash- which I used the nifty iPhoto to put back into date order.
I want to take them all off my laptop, now............as I need to use it for WORK!!
Copied them (hours and hours) to another external hard drive.
They are now in alphabetical order (all 19,000+ of them) NOT IN THEIR EVENTS or date order. (-They have also been taken with different cameras over the years and some of the generic camera numbering remains.)
I have tried to copy them (only a few as an experiment) one event at a time, but that again "opens up" the Event "folder" and tips them out as individuals and therefore just lists image letters and numbers alphabetically.
How can I copy
the whole library still in "Events" to an external hard drive?
the folders/albums I have already made on to this hard drive?
and how can I add to this back up monthly, again keeping events and folders separate and updated?
Mac is so user friendly - there must be a way.........
Thanks

UPDATE : I have re-installed from disk, various apps that were no longer functioning such as iLife, iWork etc. So, I now can access my photos again.
Also, I had to re-install all the software for my printer ( Stylus Pro 4880 ) and reset it so the printer is working again.
Photoshop CS4 won't open. I think I will have to get in touch with Adobe as basically, I guess they have a built-in "blocker" which prevents me from opening the app as the license is for only 1 user and having re-installed the OS, there are now, in effect, 2 users ( Me and Me 1, I think ).
So, having added on a new external HD, Time Machine has made a copy of most of the files, folders, apps etc onto the external HD. The internal HD is still nearly full ( 220 GBs out of 232 GBs ).
I am guessing the way to go now in order to free up space on the internal HD is to delete/trash older photos from my iPhoto library and hope that if needed, I will be able to access them on the external HD.
Am I correct ? Please advise before I do something I will regret.
Thanks, Sean.

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy. Pic and texts are saved as a PDF, how can I paste the doc ?

MS Word: This file is read-only. To save a copy, click OK, and give the document a new name in the save dialog box.

This is not a question. I believe I've found a new issue and the fix for it.
The situation:
A brand new iMac 27" running Yosemite 10.10.1
MacMini server running 10.8.5 server.
The issue:
Client on iMac trying to work on MS Word documents stored on server was requiring him to save the documents to his desktop and then copy them back to the folder on the server. The exact error message was, "This file is read-only. To save a copy, click OK, and give the document a new name in the save dialog box."
The issue is unique to this computer in an office of 10 client computers and three servers.
Attempted fixes:
Verified that the ".Temporaryitems" folder existed and the permissions were set properly.
Repaired permissions on the client and the network share.
Definitive fix:
By default, Yosemite 10.10.1 uses SMB for connecting file shares. When I overrode the default and switched to AFP protocol, the issue went away.
I hope this helps someone else.
Rob

That was it. What an operating system. It is very helpful to view files you are looking for. But if you have preview on you cannot save files.

FMS to copy employees firstname and lastname to UDF

Similar Messages

Maybe you are looking for