Folder audit properties

I have multiple Windows 7 computers that I have set the auditing on C:\ to Fail everyone and I selected Replace all existing inheritable auditing entries on all descendants with inheritable auditing entries from this object. All these computers are on
a Domain. I have been able to create a security template that will allow me to remove this setting on c:\ but it won't remove it on all subfolders. Is there a way to do this in either a Domain policy or Local policy?

Hi,
Did we set the following setting to
Not Configured or No auditing:
Computer Configuration\Windows Settings\Security Settings\Local Policies\Audit Policy\Audit object access
Besides, if we use Advanced Audit Policy Configuration, set the following policy setting to
Not Configured or No Auditing:
Computer Configuration\Windows Settings\Security Settings\
Advanced Audit Policy Configuration\Audit Policy\Object Access\Audit File System
Best regards,
Frank Shen

Similar Messages

Folder Extended Properties (EWS+Outlook)

What Im trying to achive is to be able to create a Folder with Extended Properties using EWS and then be able to read these properties from inside Outlook.
Ive verified that it works to add & retrieve extended properties on Folders using EWS, i.e.
var f = new Folder(_svc);
f.DisplayName = "Testing";
f.SetExtendedProperty(EPD.ItqAction, 1);
f.Save(WellKnownFolderName.MsgFolderRoot);
then loading it as following,
PropertySet propset = new PropertySet(PropertySet.IdOnly);
propset.Add(EPD.ItqAction);
f.Load(propset);
or even using SearchFilder.IsEqual()
but these Properties does not appear in OutlookSpy nor MFCAPI, and can't seem to be accessable from Outlook VSTO.
I've tried
myFolder.PropertyAccessor.GetProperty(EPD.ItAction.ToMapiString());
ToMapiString creates a "http://schemas.microsoft.com/mapi/{GUID}/attr-name" string
But this results in a COMException.
Ive heard that named Properties are not supported by Outlook, what is the alternative type definition? And that one should create a Hidden Item in the folder for properties. But haven't been able to find any details on how to create a hidden item (only Hidden
folders w/ attribute 0x10f4).

>user defined properties are vanished if they are not defined in the delivery store".
What exactly do you mean? How is that possible?
>I'd recommend asking EWS specific questions on the Exchange dev forums instead
Eugene, I am answering this question in the Outlook dev forum. It is perfectly fine here. If you do not know how to answer it, you do not have to reply. There is no requirement that you answer each and every question asked in the forum.
Dmitry Streblechenko (MVP)
http://www.dimastr.com/redemption
Redemption - what the Outlook
Object Model should have been
Version 5.5 is now available!

Audit properties

When I customize my property palette in the RON to show the audit properties nothing happens!?
What is the problem here?

Hi,
Are you trying to check the Audit Properties of the Workarea?
If so, come down to Application System and you should be able to see the Audit properties.
If still you can't see can you just tell the Designer you are using and whether your repository is versioned or non-versioned?
Thanks
Vishal Jain

Windows server 2008r2 files and folder auditing.

Hi ,I want to Monitor files and folder with auditing in 2008r2 like write,read,delete etc..
Can you please help me on that.
Thanks in advance for your support.
Thanks,
Bhautik Shah

Hello,
this must be enabled on the folder you like to monitor. Steps in the following thread from the same question are still valid:
Enabling file auditing is a 2-step process.
[1] Configure "audit object access" in AD Group Policy or on the server's local GPO. This setting is located under Computer Configuration-->Windows Settings-->Security Settings-->Local Policies-->Audit Policies. Enable success/failure auditing
for "Audit object access."
[2] Configure an audit entry on the specific folder(s) that you wish to audit. Right-click on the folder-->Properties-->Advanced. From the Auditing tab, click Add, then enter the users/groups whom you wish to audit and what actions you wish to audit
- auditing Full Control will create an audit entry every time anyone opens/changes/closes/deletes a file, or you can just audit for Delete operations.
After you've done both of these steps, any file deletions will show up in the Security log of the file server that hosts those files.
HTH
http://technet.microsoft.com/en-us/library/dd772690%28WS.10%29.aspx
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Create folder - setting properties in default property screen

Hello
You can create a folder with following url: 'http://com.sap.cm/.?uicommand=new_folder'
Setting Collection renderer to html renderer.
This works fine.
Now, I've got the requirement to modify the standard. I have an own property group which hangs in the default properties structure.
I need to get a folder upload (with 2 additional input fields) and only my property group (already displayed, so I need to get rid of the link and show the properties).
To start, I found the [One-Step-Screenflow tutorial|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/netweaver/netweaver-developers-guide-2004s/NetWeaverDevelopersGuide2004s_Documents/KM_articles_new/howto/km/flexui/Implementing%20Flexible%20UI%20One-Step-Screenflow.html].
But the requirement says we need, just as the standard, the default properties window of our own property group (just this tab) WITH the javascript checks on the mandatory fields.
Do you have any clue how to achieve this? I looked already in the standard SAP code, but can't figure out how to achieve this one..
Thanks for hints and tips.. or the solution of course
Christof

Hey Robert
I opened 2 threads because I didn't know which title would attract attention + which solutions are possible. I propose we discuss this matter further in my other thread ( https://forums.sdn.sap.com/thread.jspa?threadID=1207836&tstart=0 ) because it's useless answering plus minus 2 times the same questions But I awarded you the points!
So I close this one now..
Christof

Records Management not appearing in my folder/file properties

I just did a fresh install of OCS_101200.tar.gz . I enabled records management using the steps described in http://download.oracle.com/docs/cd/B25553_01/content.1012/b25275/scenarios.htm#FLSAG129 . I can log into the /rm webapp and create file plans, records policies, etc. But when I right-click on any object in the Collaboration Suite web interface and click Properties, Records Management does not show up as a menu option. Is there an easy fix, or did I mess up the installation?

Hi ckonstanski,
as far as I can remember you have to define at least one record category in the RM Web client ( http://your.OCS.com/rm ) to make the Records tab visible in CS Web client.
Kind regards,
- Roland

Public Folder Audit

have look at some of the Netwrix free tools for this

I'm looking for a tool (or PowerShell script) that will report (and then enable me to potentially delete/archive) which Public Folder items are older than 3 years. I've had a look at ExFolders and some scripts but struggling a little bit.
This is for Exchange 2010.
This topic first appeared in the Spiceworks Community

Workbook dependent missing in Folder properties

Hi,
I had encountered a problem. When I create a workbook in Discoverer Desktop and saved. In Discoverer Administrator, I am able to see the workbook name under the Folder's Properties, Dependents tab.
However, if I open the same workbook in Discoverer Plus(web-based) and just do a save. The workbook name will disappear under the Folder's Properties in Discoverer Administrator.
If I try to open the same workbook in Discoverer Desktop again and do a save. The workbook name will appear again under the Folder's Properties, Dependents tab.
I am using the same username to login both Discoverer Desktop and Plus. The Default EUL for both is the same.
Discoverer Administrator version 9.0.2.00.00
Discoverer Desktop version 9.0.2.0.0
Discoverer Plus version 9.0.2.54.01
Is there any settings I need to do in Discoverer Plus in order to solve this problem. Pls Advise. Thanks.

Problem solved. The file manifest.mf had vanished from the project. Replacing it with one copied from another project sorted it.

Get folder properties or info

Does anyone know how to access a folder's properties (eg.
size, modified, date, etc). I have 2500 jpg files within a folder
and would like to know if the folder has been updated in any way
instead of checking all 2500 files using something like buddyAPI's
baFileDate().
Many thanks in advance / RP

Pangy (London) wrote:
> Does anyone know how to access a folder's properties
(eg. size,
> modified, date, etc). I have 2500 jpg files within a
folder and would
> like to know if the folder has been updated in any way
instead of
> checking all 2500 files using something like buddyAPI's
baFileDate().
Checking all the files will not take very long. I would not
trust a folder's
properties to check on its contents.
Andrew

Log messages for 'auditing' are different in 'general' and'application log

Hi,
From UI, When I audit a file using a profile which comprises of user-defined 'rules/categories/analyzers', I will get log messages at ''File-name(Application) log window' and 'Messages' log window, which are located at bottom of Jdev UI page. One common message in both the log windows is
" <n1> violations, <n2> exceptions, <n3> documents, <n4> seconds>.
But here the 'n1,n2,...' numbers are dfferent in two windows though the log output is for a same file. In this the 'file-name' log shows the correct
Example:-
In 'file-name' log window ,it shows as:
3 documents, 8 violations, no exceptions
In messages window, it shows as
"Audit starting on EFC.jpr (Default)
Audit completed: no violations, no exceptions, 3 documents, 1 second"
If I use the 'pre-existed'(Jdev's) rules profile, I will get similar output in both log windows.
From this I concluded that there is something missing to register for a new 'rule/category/analyzer'.
Could you suggest me in this case. Do I forgot anything to do in any files of '<rule-implementation.java>', 'audit.properties', <add-in launcher>.java, extension.xml.
Actually, I want to use 'ojaudit' executable from command line to my project files. Here I observed that the output of the 'ojaudit' is similar to the above explained 'Message' log window in JDeveloper UI. But where the 'Message' log window output is not correct for user-defined rules.
Regards
Madhu

Romano,
In the upcoming production release (planned to be released next week), we added caching of authorized roles and permissions in JhsAuthorizationProxy class.
I suggest you wait for this relase, if the problem persists, it is most likely an ADF issue (as is the logging)
Steven Davelaar,
JHeadstart team.

Changed Outlook Contact Form back to IPM.Contact - now I can't save contact in Public Folder

I recently changed the Contact form that we were using back to the default IPM.Contact. I did this so that it would be consistent for only a few of us had a custom contact template to use and it made it difficult to share contact information. After
changing the contact default back to IPM.Contact and changing all the contacts to reflect the default Message class, no can add a contact to the Public Folder contact file. I have tried several different setting for the permsion. Publishing Author, Publish
Editor, Owner, it still gives the error
The item cannot be saved to this folder. The folder was deleted, or you do not have permission. Do you want to save a copy of it in the degfualt folder for the item.
When I changed the form back to IPM.Contact i ran the omglass.exe to change it on all the contacts in the public folder.
Please advise for no contacts can now be added to our company contact list

Hi,
Please right-click this public folder, click Properties. In the General tab, make sure the field of "When posting to this folder, use" is set to IPM.Contact.
Please restart Outlook with Outlook /checkclient switch(Start > Run > type Outlook /checkclient and enter) to have a try. If it fails, please create a new Outlook profile to have a try:
http://support.microsoft.com/kb/829918/en-us
Regards,
Winnie Liang
TechNet Community Support

Can't find file in new folder?

I'm writing a script that exports some data from Excel then opens the file in TextWrangler to do a find & replace. The first part of the script checks to see if there's a Folder called "Output" on the desktop, if not create the folder.
If I run the script and the "output" isn't on the desktop it does create folder but the script errors with: "Can't make <class cfol> "Output" of <class cfol> "Desktop" of <class cfol> "user" of <class cfol> "Users" of <class sdsk> od application "Finder" into type list, record or text.
But if I run the script with the "Output" folder already created it runs as expected.
Any ideas??
Here's my code:
set OutputFolder to "Output"
--set DefaultFolder to (path to documents folder as string) & "My Stuff:User Lists:" as alias
(* Keep exported CSV file? *)
set deleteCSV to true
set targetFolder to (path to desktop folder) & OutputFolder & ":" as string
try
get targetFolder as alias
on error
tell application "Finder"
activate
set targetFolder to make new folder at (path to desktop folder) with properties {name:OutputFolder}
end tell
end try
(* Select Users to Export *)
set ExcelDocument to choose file with prompt "Please choose User List." without invisibles
(* Open Users in Excel *)
tell application "Microsoft Excel"
open ExcelDocument
activate object sheet "PC Information"
set f_path to targetFolder as string
--get sheet name
set Nameofsheet to name of active workbook
-- remove file extension
set Nameofsheet to name of active workbook
if text -4 of Nameofsheet is "." then
set Nameofsheet to (text 1 thru -5 of Nameofsheet)
end if
-- save with new file name as CSV type
save active workbook in f_path & Nameofsheet & " PC" & ".csv" as CSV
-- close the sheet
set CloseSheet to active workbook
set saved of CloseSheet to true
close active workbook
end tell
(* Find and Replace *)
set file3 to alias f_path & Nameofsheet & " PC" & ".csv" as string
tell application "TextWrangler"
open {file file3} with LF translation
replace "\\t" using "," searching in text 1 of text document 1 options {search mode:grep, starting at top:false, wrap around:false, backwards:false, case sensitive:false, match words:false, extend selection:false}
replace "\"" using "" searching in text 1 of text document 1 options {search mode:grep, starting at top:false, wrap around:false, backwards:false, case sensitive:false, match words:false, extend selection:false}
set properties of text window 1 to {show invisibles:true}
set properties of text document 1 to {line breaks:DOS}
--save text document 1
save text document 1 to targetFolder & Nameofsheet & " PC" & ".txt"
close document 1
end tell
(* Delete CSV file? *)
if deleteCSV is true then
do shell script ("rm " & (quoted form of POSIX path of file3))
end if
(* End *)
tell application "Finder"
activate
display dialog "The Group " & Nameofsheet & " has been exported."
end tell
eMac 1.25GHz (Tiger) & G5 Xserve (Tiger) Mac OS X (10.4.5)

Hi Ben
In the case when your script creates a new folder, you're changing the variable targetFolder from a path (as string) to a Finder item. Excel needs the path.
set targetFolder to (path to desktop folder) & outputfolder
-- targetfolder is a string at this point
--snip
--the alias targetfolder doesn't exist, so:
tell app "Finder" to set targetfolder to make new folder at desktop with properties {name:outputfolder} -- targetfolder is now a Finder object, not a string or an alias
-- snip
-- a bit later:
tell app "Excel" to do things to targetFolder
--Excel doesn't speak Finder, you get the error.
As far as I can see you don't need to use the variable targetFolder for anything other than the string, so all you should need to do is:
tell application "Finder" to make new folder at desktop with properties {name:outputfolder}
The variable targetFolder doesn't get changed, and Excel will still understand it.
Hope this helps,
H

Unable to load properties file from filesystem

Hi,
I have a client swing-applicatiion packaged in a jar-file. The application uses some resource files, including a xxxx.properties file to set defaults for the application. All resource files are included in the jar file and everything works as expected. I load the xxxx.properties file as follows:
is_ = getClass().getResourceAsStream("/resources/xxxx.properties");
Because it is not possibl to change any property values inside the jar-file without recreating this jar-file, i want to exclude the xxxx.properties file from the jar-file and put it in the folder containing the jar-file.
So i have:
drive:/folder/app.jar
drive:/folder/xxxx.properties
Now i read the xxxx.properties file from disk in stead of the 'resouce'-folder within my application (jar):
is_ = getClass().getResourceAsStream("drive:/folder/xxxx.propoerties");
but it doesn't work, the file isn't found.
What am i missing here?
Any suggestions?

The best way to approach this is to include the properties file in the Jar as you originally did. If the user changes any property, save the entire set of properties to a sub-directory of user.home (perhaps based on the package name of the main class). Check for the copy in user.home before using the 'default' properties built into the Jar.
Other places/ways to store the changed information.
- java.util.prefs.Preferences
- Assuming the app. has a GUI and can be deployed over a network, the JNLP API PersistenceService. Here is a demo. of the PersistenceService (http://pscode.org/jws/api.html#ps).
Edit 1:
I did not at first notice that this post was in Java Applet Development.
<li> Applets can also (theoretically) use cookies to store information. This is prone to failure when users disable cookies.
<li> To store information on the local file system (e.g. in user.home) or to use Preferences (AFAIU) would require trusted code.
<li> If the user has the Next Generation Java Plug-In (Java 1.6.0_10+) it is possible to leverage the JNLP API services in an embedded & sand-boxed applet.
Edited by: Andrew Thompson on Feb 1, 2011 9:32 AM

DFS Folder Target to Samba Share not working

Hello folks,
I'm on Server 2012 R2. I'm using a DFS Namespace that is configured as standalone server (i.e. not a domain-based namespace). The Namespace is the IP address of the server. I have also tried this with the hostname of the server and I get the same results.
Here's my problem:
I've created a folder target within DFS that points to a samba share on a linux-based NAS. The samba share is a 'cloud storage' share hosted by my server host, so I'm not entirely sure what specific technology it is. It does not have a public ACL - it requires
authentication and I cannot change that. I can connect to the Namespace fine from other servers. However, when I try to open the folder target, it tells me "Logon failure: unknown user name or bad password". Then, if I right-click the folder, select
Properties then the DFS tab, I see that the path is Active. If I click Check Status, I get Okay, and when I exit, the folder is now navigable and I have no problems browsing the folders. Sometimes when I close Explorer, the share will still be accessible when
I reopen Explorer and browse to it, but most of the time when I close and reopen, the same error is displayed and I have to Check Status again to regain access. If I logout of the session, log back in and try again, it always gives me the error until I Check
Status again.
The idea is to access this share from multiple instances of IIS, so obviously requiring user intervention is not going to be suitable. I have added a local user to the DFS server that matches the valid credentials on the samba share, and I've also added
them to all the servers trying to use this share. I've confirmed that all servers can browse directly to the share. I do notice that when I browse directly to the samba share after having not used it for some time (30 minutes or one hour), it takes longer
than expected to open - maybe 10 seconds. Could this lag be causing the issue? There are no errors or warnings in the logs on the DFS server. Any ideas what this could be? Have I missed something? Massive thanks for any guidance!

Hi,
Thanks for your posting.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How Do I Move Local OneDrive Storage Folder to Another Location?

Howdy,
I've just installed the new 9926 build and wanted to sync my OneDrive data. I am using native VHD boot and so OneDrive setup wizard automatically chose the local
%USERPROFILE%\OneDrive folder as a local storage for the data obtained from OneDrive.
However, I don't want the data to be stored on my VHD drive. The OneDrive wizard didn't provide any Back button to change settings for the local storage location, so I had to use the location I've chosen.
Now how do I move the OneDrive folder to another location? Previously you could right-click OneDrive folder, chose Properties and change the location on the Location tab. Now there isn't such a tab.
Is it a step back in usability for OneDrive feature?
How do I move local OneDrive cache folder to another location?
Thank you.
Well this is the world we live in And these are the hands we're given...

I've found out that you have to unlink OneDrive from your PC and repeat configuration steps to change the location of OneDrive folder on your PC, just like you did so in pre-Windows 8.1 builds.
Is it a new behavior and MSFT wants to get rid of Location feature in newer Windows 10 builds, or it is just a temporary issue because some parts of Windows 10 TP code are based on pre-Windows 8.1 codebase?
Thank you.
See also
Move the OneDrive Folder
Well this is the world we live in And these are the hands we're given...

Folder audit properties

Similar Messages

Maybe you are looking for