Following 5DMII procedures

I have had really good successs with Compressor (for the most part) on the G5. I am trying to keep this old horse going for one more show until late August when I intend to buy a new MacPro tower upgrade the FCS etc.
Shot some important footage on the Canon 5D Mark II, recently. I had not upgraded the firmware in some time, and had not experienced any real issues as I am shooting for a PBS film which is running into the 4th (and FINAL) year. So I've simply been downloading the video clips with the Canon software reviewing and sometimes logging a bit. Everything has seemed fine. I am not a phenom techy nor editor or great renown. I am a natural history DP who has been tape based for many years in HD.
I tried to drop them directly into a timeline and noticed the poor synch on sound and then the stuttering of the video.
1) I followed some on line advice to reconvert the clips to a 29.97
2) I came into compressor to do a pass to 422.
Will this solve the problems? Thanks for any and all help.
Tim Barksdale

Yes, simple conversion to ProRes 422 is all you need to do, no need to convert TC unless PBS has a need for that (which I think they do). In newer systems (FCP 7) you'd use ProRes (LT) via the Log & Transfer, as Canon's EOS Movie plugin for FCP is the best.

Similar Messages

My computer wont recognize my iphone 4. when i plug it into any computer it doesnt charge. i followed the procedure on the website but the device manager still says unknown device. any ideas how to fix this???

My computer wont recognize my iphone 4. when i plug it into any computer it doesnt charge. i followed the procedure on the website but the device manager still says unknown device. any ideas how to fix this??? the weird thing is it use to work until yesterday. thanks

Will it charge when connected to a wall outlet? The USB port on your computer must be 2.0
Powering Apple and third party peripherals through USB

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" pop up. There was no error message all along when I created the book.

I created a book and tried to place order but failed. I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" appeard. There was no error message all along when I created the book. I tried several time but failed.

preview the order and try again - http://support.apple.com/kb/HT1040
If it still does not work boot into Safe Mode, preview again and try
With the number of reports in the last few days it may be server overload - if so trying during a time of lower activity might help
LN

Autonumber bug in headings following a procedure

Hoping someone has an answer to this...
I'm on Frame 11 (11.0.0.380) on Windows 7.
I'm running into a strange issue with headings that are autonumbered. Everything works as expected... until I include a proccedure that has autonumbered steps and sub-steps. The heading immediately following the procedure renumbers from the beginning. The image below shows an example. There are three headings, which are numbered correctly. Then I inserted a subheading with a procedure and the heading below it has incorrect numbering. This only happens in headings that follow a procedure.
The autonumbers for the paragraphs are:
Heading1: <$chapnum>.<n+>
Heading2: <$chapnum>.<n>.<n+>
Numbered: S:<n+>/\t
NumberedCont1 (sub-step): <a=1>.\t
Is there something incorrectly set up in the autonumber format or is this a bug?

Take a look at this. http://help.adobe.com/en_US/FrameMaker/9.0/Using/WSF176D8C8-8133-4860-88E3-AF69262623F0.ht ml
The problem is in this paragraph with this numbering:
NumberedCont1 (sub-step): <a=1>.\t
You reset the numbering of the main paragraph back to 1, when you used the <a=1> tag since you did not preface it with S:.

HT2534 I can't see the "none" option even though I followed the procedure step by step. What is the problem?

I can't see the "none" option when trying to open an iTunes account even though I followed the procedure detailed in the apple website step by step. What is the problem?

jimka_2001 wrote:
What should I try next?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Why won't my history clear when I follow the procedure?

I followed the procedure outlined in your article and my browsing and download history did not delete.
Firefox 25.0.1 for What's up with that?

Some of the entries are my bookmarks and some are not, but none of them are deleted.
I uninstalled FF, reinstalled it and tried to delete history and it still would not delete. I also tried syncing and not syncing with my desktop with no results.
The only way for me to clear my history is to clear the data in the android settings under apps, but that also deletes my bookmarks. So, in order to prevent my tablet getting overloaded with history I am going to have to abandon Firefox until they can fix the history problem.
I am very disappointed with the newer FF editions.

HT5312 How do I reset the security questions ? I followed the procedure step by step and I had no " reset info security email " option!

How do I reset the security questions ? I followed the procedure step by step and I had no " reset info security email " option!

Welcome to the Apple Community.
Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

Poor Follow up Procedure on Apple Store

I bought a Ipod nano on 16 Sept via Apple Store and I received it on 19 Sept. But when I used the new ipod to listen my music, its output has problem that sound output with noiscy. So I called Apple to solve it. I need to call different phones number by myself to open approval the ipod problem, service ticket, arrange re-delivery. End up Apple need to wait to receiving back the poor quality IPOD, and then START to arrange re-deliver the new one to me. This IPOD is for my wife's gift. Because The IPOD's quality is poor and procedure problem, I need to wait to more two weeks and buy another gift to my wife. Even the CS of apple said they will call me back for follow up my case yesterday, I still do not get any call from Apple CSby noon.

no but it may come with the new firmware 1.1.1 and also if you use it for something other then AT&T you will not have a warranty, it may also not allow any changes. Just buy it and use AT&T like the rest of us so we don't have to hear you complain when you break your phone.
now ebay, you dont know what you are buying
it could be a brick already
it could be stolen
it could be a clone
it could be a

How to map the following pricing procedure in SAP

hello all guru of SAP,
here is the pricing which is used in our company so i want to map it in SAP
so how to do this
just bellow is the example
spoiler maruti zen vxi material name    779SMZV is the material number
basic price @36.11 for 300unit is                10833
MRP @117 for 300units                             35100
MRP price after [email protected]%             23341.50
Total basic price                                               10833
assesable price after abatement                         23341.50
assesable value                                                  10833
excise duty on MRP after abatement@16%            3735
CESS on excise duty @2%                                     75
CESS duty for secandary higher education@1%         37
total net sales                                                       14680
sales tax [email protected]%                                                 1835
total value                                                              16515
so please help me what is the best possible way to map this pricing procedure in sap what should be the condition and wat should be the configuration
with lots of hope
subrat ranjan panda
9313480938
[email protected]

I m not able to understand urs query, if u can explain more then i might be able to help you. You can mail me or call me
regards
pradeep
+91 9971375659
[email protected]

I cant transfer my new purchase on my new ipad. I have 2 ipad. I have follow the procedure to go to store to authorize and it was successful but when I initiate the purchase transfer, the same message appear asking me to do the same thing.

I have difficult transfering my purchases on my new ipad to my computer. I have 2 ipad. I have followed the instruction closely. That is to go to store and authorize
my PC. It show it was successful as I still have not exceeded the 5. It shows 3 only. When I go to file to transfer the purchase, an error message appear telling to
go to store and authorize the PC. I repeat this process but in vain. I am getting frustrated.

Delete and redownload them if doing so is free in your country.
(106637)

Do I need to follow a procedure for reinstalling acrobat 7.0 professional?

I need to perform a system recovery on my laptop and I wonder if I am going to have any issues reinstalling acrobat 7.0 professional.

Or if you can deactivate before the recovery it might do the job. Sometimes a recovery is not needed, but you can reinstall the OS without recovery. To do that you will find instructions on the new, but if you follow the install button rather than recovery you should reach a screen that gives you a choice to reinstall or repair. The repair is more likely what you want. In that case, system files are replaced, but your system retains most other parts of your setup.
Here is a link with directions for XP (Note the page where it says to NOT use the restore). http://pcsupport.about.com/od/operatingsystems/ss/instxprepair1.htm
Similar processes are available for Win 7. The steps that MicroSoft provides that suggest to use Restore to repair your machine are misleading. The repair you want is part of the install process (review the screen shots in the line). I have done this several times and it is a life saver for someone like me who has a lot of software that is not part of the original installation included in the system -- in fact most of the software I use regularly.

HT202159 "An error has occurred". I followed the procedures for restarting OS X 8.0 download but the "pause/download" button was dead. What next?

The procedures for restarting Mountain Lions downlown do not seem to apply in my ssituation. Before today's impass I had failed twice to download then was able to start all over again from the beginning. The system knew that I had purchased the program and allowed me to start again. Both times i lost the data (6-8 hrs per attempt) in the downloads. But that's not the problem that I am faced with now. The techniques provided to restare don't work. I can't initiate the program's download through "purchasing". The message "an error has occurred" is persistent. It don't disappear. I reboot, reenter the Apps Store. There it is again. The "pause/download" button is dead, Has anyone had a similar experience? I wish Apple would supply a disk for this program.

Welcome to the Apple Support Communities
Press Shift key on boot, delete Mountain Lion installer from Applications, open App Store > Purchases and download OS X. If it doesn't help > http://www.apple.com/support/mac/app-store/contact

HT201328 I am going to India, the ATT says the is unlocked and follow the procedure back up,erase,insert new sim,restore. Is it that simple? Will there be any problem when igo to India with local SIM card? How to find out compatibility of local SIM car

I am going to India. ATT says phone is unlocked. Can I use local SIM card to use my i phone5? Will there be any compatibility problem.

If AT&T authorized your unlock, you received the email from them giving you instructions to unlock and you followed those instructions, followed by a message in iTunes saying Congratulations, your iPhone is now unlocked, then you will have no issues using a local SIM. However, your warranty is only good in the US, and it may not support all of the bands in India, especially LTE.

TS1702 My iPad2 calendar app closes every time I turn the page to or select March 2013. I have followed shutdown procedures but still a problem. Can anyone help please?

The Calendar app crashes when I select March 2013. I tried hard restart but app still crashes when March is selected.

Look on april 1st. If you have any all day events, remove them. It's a glitch where all day events on APril 1 mess up March.
Remove the event or edit it to span a few hours and March will reappear

HT1751 After "Restoring iTunes Library Backup" it wont link to the files in the iTunes folder. I've followed the correct procedure, and iTunes lists all my music correctly (but with no artwork), but can't locate any of the files. Using Windows 7. Help ple

After "Restoring iTunes Library backup" it wont link to the files in the iTunes folder. I've followed the procedure as described, and the iTunes folder is in the correct location. iTunes lists all my music correctly (albeit with no artwork), but can't locate any of the files.
I've been restoring my iTunes folder from a backup hard drive to a new computer on which I've downloaded the latest iTunes (10.7). If this is a newer version than the one I backed up with could this be the problem? (I had the latest (to my knowledge) iTunes when I backed up the folder about 3 weeks ago, was this version 10.7?)
Or is the version of iTunes (within recent updates) not an issue when restoring a library?
Using Windows 7.
Any help please?

From the top of the page where the scripts live...
The general method of use is to download the script to a folder of your choice, e.g. your Desktop, Downloads folder or create a folder at ...\iTunes\Scripts. Select a playlist or highlight some tracks in iTunes and then double-click on the script to execute it. If no specific tracks are selected the script will try to work with all tracks in the current playlist. Some scripts offer a choice of track by track confirmation of changes or fully automatic processing of the selection. Many of the scripts can optionally display a progress bar while running.
You are strongly advised to backup your entire library, or at the very least the iTunes Library.itl file, before use. Test the behaviour of your chosen script on a small group of files first to make sure it does what you want before applying it to large numbers of files.
Most builds of Windows will execute *.vbs scripts when you double-click them. If that doesn't happen then you might need to visit the Add/Remove Programs or Programs & Features control panel to enable the Windows Scripting Host. I can track down details if you have issues.
Backing up and restoring data is an area that is often glossed over. Most people don't try to learn much about it until they've lost something important. (Me too )
If your iTunes library was in the usual layout then normally copying the whole iTunes folder from the User's Music folder in the old computer to the User's Music folder in the new one will usually work fine. Ideally this is done before iTunes is installed so that there is no empty library to replace, and all settings are picked up from the old library. This post contains more details.
tt2

Following 5DMII procedures

Similar Messages

Maybe you are looking for