Font management from the server-side

In the process of creating Breacrumbs for our website
redesign, the Graphics Designer would like to use a special fonts.
We already know that this font will not be installed on most of
user client-side. She though about creating graphics to represents
the navigation (breadcrumbs) but I ask myself if we can use the
Font Management from the Coldfusion Administrator. I have no
experience with this feature and have not find interesting
information about it from the web.
Is it possible to use a font installed on the server-side
through CSS so the client/web-user will see the text with that
font?

You could use WEFT, but it is still limited to certain
browsers.
http://www.microsoft.com/typography/web/embedding/weft3/
Bitstream has something to , but again, is limited
http://bitstream.com/

Similar Messages

How do I send a raw (push) notification from the server side using an Azure mobile service?

Hi there!
Currently I'm able to send toast notifications to my user from my Azure mobile service using the following line of code in one of my server side scripts:
push.wns.send(opponent_id, payload, 'wns/toast', {
success: function(pushResponse) {
console.log("Sent push:", pushResponse);
request.respond(statusCodes.OK, {});
error: function(pushResponse) {
console.log("Error Sending push:", pushResponse);
request.respond(500, { error: pushResponse });
But I would like to send a raw notification to my user now, not a toast notification. I've set up a background tasks which runs as soon as a raw notification arrives(I've tested this through the diagnose option of my mobileservicehub and it works).
I want to send a raw notification now from the server side and I'm kind off lost on how to do that. I've looked for it but can't seem to find an answer to that question, I might be looking for the wrong stuff though.
I'm looking for a solution that looks the same as the one for a toast notification(as demonstrated in the code above).
Your help would be greatly appreciated!
Thanks in advance!
Jan

I found the solution to this it was in fact really really easy, I should have read the documentation more properly since it clearly said that the payload for raw notifications could be literally anything but the client has to take care of it.
So I figured that out!

How to Get the excel sheet formula from the server side into the j2me app?

How to Get the excel sheet formula from the server side into the j2me application?
Here the excel sheet is in server side.i want to do get the excel sheet values (only some part of the excel sheet based on some conditions) from server side into j2me.In j2me I want to done some client side validation based on the formula of excel sheet.Then i resend the new updated data to the server.
But here deosn't know any mehtod to get the excel sheet formula from server side.So kindly help me to get the excel sheet formula from the server.
So how to get the excel sheet formula frome the server side into j2me Application...
Plz guide me to solve this issue...
thanks & regards, Sivakumar.J

You should not post a thread more than once. You've crossposted this question to another forum. I have deleted that one.

Hit the VIP from the server side behind the CSM in L2?

We have a CSM w/ 4.1.6 and would like our RIPS to be able to access a VIP on the same CSM they are on the same subnet but different vlans in L2 design. Any ideas to make this work?

According to DE, the SSL blade will apply its local subnet mask to the incoming packet's source IP. In your case, you had a /24 subnet mask configured on the SSL's vlan, so addresses that end with .0 or .255 would be discarded since the blade treated them as network or broadcast addresses.
The workaround is to configure the lowest subnet mask on the SSL proxy vlan where traffic is received (like a /8).
Configure ssl-proxy vlan with lowest mask to receive traffic or configure ssl-proxy vlan where traffic received to lowest mask (ie,. /8 mask) or load next maintenance release image 2.1(2)

Multiple room management -- best practice -- server side http api update?

Hi Folks,
Some of the forum postings on multiple room management are over year old now. I have student/tutor chat application which has been in the wild for 5 months now and appears to be working well. There is a single tutor per room, multiple chats and soon to be a whiteboard per student, which is shared with the tutor in a tabbed UI.
It is now time to fill out the multiple tutor functionality, which I considered and researched when building, but did not come to any conclusions. I'm leaning towards a server side implementation. Is there an impending update to the http api?
Here is what I understand to be the flow:
1) server side management of who is accessing the room
2) load balance and manage the room access 1 time user and owner session from the server side
3) for my implementation, a tutor will need to login to the room, in order for it to be available
4) Any reconnection would in turn need to be managed by the server side, and is really a special case of room load balancing.
My fear is that at some point I'm going to need access to the number of students in the room or similar and this is not available, so that I'll need client functionality, which will need update the server side manager.
As well, I'm concerned about delays on the server side access to which might create race conditions in a re-connect situation. User attempts to reconnect, but server side manager thinks that the user is already connected.
Surely this simple room management has been built, does anyone have any wisdom they can impart? Is there any best practice guidance or any samples?
Thanks,
Doug

Hi Raff, Thanks a ton for the response.
I wasn't clear on what I was calling load balancing. What I mean by this is room assignment for student clients. We have one tutor per room. There are multiple students per room, but each is in their own one-on-one chat with the tutor.
I'm very much struggling with where to do the room assignment / room managemnt, on the server side or on the client side (if that is even possible). In my testing it is taking upwards of 10 seconds minimum to get a list of rooms (4 virtually empty rooms) and to query the users in a single room (also a minimum of users/nodes in the queried room). If after this point, I 'redirect' the student to the least full room, then the student incurs the cost of creating a new session and logging into the room. As well I intend to do a bit of xml parsing, and other processing, so that 10 seconds is likely to grow.
Would I see better performance trying to do this in the client?
As far as the server side, at what point does a room go to 'not-active'?
When I'm querying the roomList, I am considered one of the 'OWNER' users in the UserLists. At what point can it be safe to assume that I have left the room?
Is there documentation on the meaning and lifecycle of the different status codes? not-active, not-running, and ok? Are there others?
How much staleness can I expect from the server-side queries?
As far as feature set, the only thing that comes to mind is xpath and or wild card support for getNode() but i think this was mentioned in other posts.
Regarding the reconnection issues, I am timing out the student after inactivity, and this is probably by and large the bulk of my reconnect use cases. This and any logout interaction from the student presents a use case where I may want reassign the student return to the same room as before. I can envision scenarios of a preferred tutor if available etc. In this case, I'll need to know list of rooms. In terms of reconnection failover, this is not not a LCCS / FMS issue.
Thanks again for responding.

How to download a pdf file from the server from an strut application?

Hi,
I wan to download a pdf file from the server side to local system. Please help me how i use the down load option.

Read up on the Struts download action [1].
And next time, please post in the relevant forum, one of the web-tier ones [2].
[1] http://wiki.apache.org/struts/StrutsFileDownload
[2] http://forum.java.sun.com/category.jspa?categoryID=20
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------

SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote

Sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0

sys.webforms.page request manager server error exception:An unknown error occured while processing the request on server. The status code returned from the server was:0 We got this response(In firebug console) when we try to click on link (after leave webpage for 3 minuts ideal) which is AJAX based. Please reply ASAP because its urgent.

Hi SP,
Please check if the following web config appSettins value settings from SSRS server could fix the issue (Note, back up your original web config file before any modification).
http://stackoverflow.com/questions/10911610/ssrs-webpage-error-status-code-500
http://srinivasbn.blogspot.in/2013/09/syswebformspagerequestmanagerservererro.html
http://connect.microsoft.com/SQLServer/feedback/details/782155/ssrs-2012-failed-with-win32-error-0x03e3
If you have more questions about the SSRS error logs related to this issue, you can post in the SSRS forum for a better assistance with more experts.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to use mathscript node in server side with the parameter from the client side

I tried to develop a server/client system with some algorithms written in matlab. So I included a mathscript node on the server side. The client will send the parameter to the server. According to these parameters, the sever will call the matlab functions to do some computings and then send the results back to the client. The server has to wait for all parameters received before the computings. How do I know this since I only connect the parameter variables to the inputs of mathscript node on the server. The sever cannot know whethere these parameters are the new ones or old ones since the client may send parameters multiple times?

It seems to me you have two perfectly good options to start with. You could send all possible parameters in a single packet from the client to the server. This could be in the form of a cluster or an array of values. If by server/client you mean you are sending data over the network, then you could flatten this data to string before sending and unflatten it on the other side. Since all parameters come in one packet, you know all the data is valid every time you send data.
The other option is to send the parameters individually, but include some extra information such as a timestamp or iteration count. The server keeps reading and storing parameter values until a packet arrives with the next timestamp. Alternatively, you could include some information such as an end-of-parameter-list boolean that is sent with every parameter. It would be false until the last parameter packet.
Give it a thought. There are lots of solutions.
Jarrod S.
National Instruments

How to run OPatch against Node Manager from the admin server

How to run OPatch against Node Manager from the admin server

Hello,
I'm not sure what you meant by Opatch against nodemanager.You can check the below document about how to apply patches using Opatch
Oracle Fusion Middleware Patching with OPatch - 12c (12.1.2)
Refer the section " Common OPatch Commands When Patching an Oracle Fusion Middleware Oracle home"
/MR

Request timed out because there has been no reply from the server in 600000

Issue:
Request timed out because there has been no reply from the server in 600000
Scenario:
1. All the crystal reports are designed by using Crystal Report 2008 Version -- 12.3.0.601
2. All reports are uploaded to CMC (SAP Business Objects Enterprise XI, Product: 12.1.0)
3. using Front-End .net Winform
4. Crystal Report is binding is done using Business View Manager (since having more than one databases)
5. Business View Manager Connects to Oracle using "Oracle Server" connection
6. Loading reports as follows
string queryString = string.Empty;
SessionMgr sessionMgr = new SessionMgr();
EnterpriseSession enterpriseSession = sessionMgr.Logon(userName, userPassword, serverName, authType);
EnterpriseService enterpriseService = enterpriseSession.GetService("InfoStore");
InfoStore infoStore = new InfoStore(enterpriseService);
enterpriseService = enterpriseSession.GetService("PSReportFactory");
Object psrfObject = enterpriseService.Interface;
PSReportFactory psReportFactory = (PSReportFactory)psrfObject;
queryString = "Select SI_CUID, SI_ID, SI_NAME, SI_PARENTID From CI_INFOOBJECTS " + "Where SI_PROGID='CrystalEnterprise.Report' " + "And SI_ID=" + ReportId;
InfoObjects infoObjects = infoStore.Query(queryString);
InfoObject infoObject = infoObjects[1];
ReportDocument crDoc = new ReportDocument();
crDoc.Load(infoObject, enterpriseSession);
7. All the reports are getting loaded properly and i am able to dynamically set the report parameters
8. After executing report, some of the reports take more than 10 minutes, due to which shows following error
Request timed out because there has been no reply from the server in 600000
Note i have done following:
1. I have checked stored procedure running through oracle for more than 10 minutes (1 hr, 2 hrs)
2. Tried simply running crystal report without front-end running perfectly more than 10 minutes (1 hr, 2 hr)
3. When i run .net winform application for specific reports which takes long time, gives "Request timed out because there has been no reply from the server in 600000"
Also i have done lot much R&D and spent almost weeks to get resolution but not getting any solution out of it, please help me in this case
HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerClient SDKCorbaAdapterWaitReplyTimeout = 600000 and HKEY_LOCAL_MACHINESOFTWAREBusiness ObjectsSuite 12.0Report Application ServerInprocServerEnterpriseRequ
AS per following URL
Session timeout
1. Log into Central Management Console
2. Go to server,right click on Crystal report processing server and select properties,change the idle connection time out to 60 minutes
3. Also right click on crystal report cache server and select properties ,change the idle connection time out to 60 minutes
4. Restart Crystal Report Processing Server and Crystal Report Cache Server
5. Change the session time out to 60 minutes in web.xml of INfoviewApp,InfoViewAppAction,PlatformSerivces and CrystalReports.
6. Navigate to the following location
<BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppWEB-INF
7. Edit the web.xml in notepad and search for the below lines.
<session-config>
<session-timeout>20</session-timeout> 
</session-config>
8. Increase the Session-Timeout parameter to 20 to 60 minutes in web.xml . Save this file
9. Repeat the same for the web.xml file in the InfoViewAppActions folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
10. Repeat the same for the web.xml file in the PlatformSerivces folder in <BO Install Dir>Business ObjectsTomcat55webappsPlatformSerivcesWEB-INF
11. Repeat the same for the web.xml file in the CrystalReports folder in <BO Install Dir>Business ObjectsTomcat55webappsInfoViewAppActionsWEB-INF
12. Restart the tomcat server
Still i am getting same error, please help me, if you have any idea, clue with respect to this error on winform

This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM

Unable to access gif files from the server

hi all,
i have successfully signed an applet and it is loading in the client system also. in that applet, i instantiated a jbutton as given below:
JButton jb = new JButton(new ImageIcon("http://192.168.91.154:8080/success/set.gif"));
but the icon din appear and a blank button appears, even when accessed from the server system.
if i give the exact path like c:/blazix/webfiles/success/ set.gif, the icon is coming in the server system but not in other systems. i tried without port no also but in vain. pl solve my problem. what i need is how to
specify the path of the file[any file] which is present in server.
or if i put all the gif files in the jar file, can i access the gif files present in the jar file [set for archive] ? if i can, give me the soln for accessing the gif file present in the jar file, so that i need not access the server to get the gif files.(i.e) how to specify the path of the gif files present in the jar file?
i ve one more doubt. the jni library file shld be in the server, and the client has to access the library in the server. i think the applet loaded in the client ll search for the library in the local m/c only . how to make the applet to search for library in the server??
i feel only by using rmi we can solve this problem. am i correct? if so i feel that an appln or applet running in the server shld access the jni library, and the applet in the client side should communicate with this server appln using rmi to get the data.is it correct? is there
anyother way?
i appreciate your help in this regard. thanks in advance. bye, padmanbhan.

Better information on what you are doing with JNI might help you get an answer.
If you have some server process that needs to use JNI, then I would code a servlet to call, instead of using RMI to ge there.
Depending on your environment, and the target audiences environment, RMI may just cause you a lot of grief. Firewalls etc, get in the way of RMI connections and force security holes to be opened in order to work.
If you use a servlet, then traffic to your server process is done via standard http calls, which will already be enabled, because your app runs in a browser.
If ther data requirements are heavy duty, your server could always send an XML stream to the client, which would allow you to describe complex data to the client.
Running JNI stuff from the client directly means a lot of local infrastructure to run your app. The code you want to run, the JNI library ....
If what you have is really an application, but want the convenience of starting it from a browser, look at Java WebStart. Then you can distribute an application via the browser, and WebStart will worry about the deployment issues for you.
In Summary:
Stay away from RMI from applets if you can help it.
If you really have an App, then try WebStart to manage the distribution issues for you.

Error getting the server-side naming service functionality

Hi all,
we are currently setting up the CTS+ activity based transport scenario. Everything seems to be working fine, however, we have to import each transport twice...
Before I go into detail in the error we get I will first describe our landscape. All the configuration we did was done in debate with SAP.
We use the SAP Solution manager (ehp1 SP 4) as the CTS+ server as recommended by SAP and have an NWDI system of which we only use the components DTR and CBS (since CMS is not used anymore in the activity based transport). We have defined three logical ports/RFCs. CTSCONFIG points to the NWDI system. CTSDEPLOY is running on the java stack of the solution manager and is only used for portal content (=epa) transports. CTSDEPLOY_DI is pointing to the NWDI system and is used for all NWDI (=dip) changes. The NWDI is running ehp1 SP3.
In STMS I defined all the non-abap systems (and configured them to use CTSDEPLOY_DI) and created the following transport route:
upload system (IMP) -> DEV -> ACC -> QAS -> PRD
I first attached the used dependencies in a transport request (SAP_BUILDT, EP_BUILDT, etc) these imported just fine. Then I did the SCA files which contain our custom code. I extracted these from the assemble step on our current NWDI system which will be removed as soon as we switch to the new CTS+ environment.
When we import the transport into the runtime systems then we see the DTR and CBS be filled sucesfully for this specific system. However, the transport request itself always fails with errorcode 12 and the error is:
Error during export service registration: Error getting the server-side naming service functionality during getInitialContext opera
tion. com.sap.engine.services.jndi.persistent.exceptions.NamingException: Error getting the server-side naming service functionality during getInitialContext operation.
Error in execution of Web services CTSDEPLOY_DI , exception is cx_cts_file_import_failed
File import canceled
When we then reimport the same transport it will go the second time fine. This is no problem during the setup but will not be workable when we go live ofcourse. Is there anyone who had this issue before as well and have a solution for it?
Kind Regards,
Nico van der Linden...

Hello Nico,
I would need the java trace files to get more info on this issue, but you can start troubleshooting this error with these notes:
#1172252: CTS+, 'attach file': Troubleshooting Guide;
#1003674: Enhancement for non-ABAP systems in CTS;
#1155884: CTS+, configuration 'close coupling': Troubleshooting guide;
Pay special attention to parameter NON_ABAP_WBO_CLIENT, whether it's correctly set on your CTS+ system(s).
Note #1003674 is a must for any CTS+ systems to work properly, as well as having an updated version of the transport programs (tp and R3trans).
Lastly, note #1155884 goes through some JCoException exceptions that commonly take place during CTS+ transports. But again, you need to check the underlying trace files to find the root cause of your issue.
I hope this information helps.
Best regards,
Tomas Black

Needs a background webdynpro application running at the server side

Hi All,
We have a requirement wherein we need to have an application running all the time at the server side to capture the response coming from a web application. Based on the response that the application receives, it needs to update some backend R/3 tables.
We are thinking of a webdynpro java application.
Can anyone suggest what kind of application needs to be implemented here?
And what would be the steps required to run the application at the server side without calling the application.
Thanks & Regards,
Anurag

Hi Robin,
Thanks for the detailed explaination.
This may sound silly to you but I've another doubt which is as follows:
As you mentioned that the external web application will be sending requests to our Web service(in SOAP envelopes) and rest of the functionality can be achieved by our web service.
Actually, we are expecting only responses from the external web application. The thing is that we are sending the requests to the external web applications from our custom webdynpro application and in return the web application will be sending us 2 responses.
First response would be back to our WD java application URL(to the browser in which WD java app is running) which would get the response and display some message based on the response.
Second would be to this web service which you have just suggested. We are having two responses so that even if the browser in which the WD java application is running gets accidentally closed, the response from the external web application must get captured somewhere else and should not get lost in any case.
So, now since we are only expecting the response from the web application and we do not want any requests from the web application to our web service; how is this possible?
I am asking the above question because you have mentioned that the external web application has to request our Web service but we want is only this web service to capture the response coming from the Web application.
Or is it like the web application will send us the response string as request string to our Web Service and the web service will capture these response parameters as request parameters from the web application and do the further processing.
But in that case, we do not want any response to be sent by the Web Service to the external web application.
Please suggest if this is possible.
Once again, many thanks for the help so far.
Thanks & Regards,
Anurag

Previewing images in forms 11g from the server

Hi All,
i need your help in this issue please
i've just migrated my application from forms 6i to forms 11g
there is a function in my application that i used that previewed images that exists on a network drive that are used in an image gallary
now i don't have this setup as the application is hosted on the weblogic server
i want an alternative method that i can use to preview the images from the server
the old way was:
read_image_file('.\default_image.jpg','any','preview.image_preview'); --this shows a default image if no image was selected
if :search_results.file_path is not null then
     read_image_file(:preview.image_path||'\'||:search_results.file_path,'any','preview.image_preview');     -- this shows the image that we retreived it's name from the database but it exists on the file system
end if;
i've configured the webutil but i don't know what method to use
also another functionality that i lost in the migration is opening a browser window to preview the final article that the editor entered using my application
the old way was:
declare
     url varchar2(1000);
begin
     url:='http://10.100.100.197:55/allcontent/allcontentimages/'||:SEARCH_RESULTS.FILE_PATH||'';
WIN_API_SHELL.WinExec('"C:\Program Files\Internet Explorer\IEXPLORE.EXE" '||url||'',
WIN_API.SW_SHOWMAXIMIZED,TRUE);
Exception when NO_DATA_FOUND then
MESSAGE('CAN NOT FIND THE FILE');
end;
now ithe WIN_API_SHELL is not working as i'm on the server side and i don't know the alternative
please advice

Hello Nivin
If you want to read an file from local drive or from netwrok drive then before reading images please make sure that do you have full rights and have you mapped that network drive .
after that you use read_image_file built in(). secondly you configure WEBUTIL package.
please visit the following link for configuring webutil.
I configured my webutil package from this link and its worked fine.
http://www.baigzeeshan.com/2010/01/open-file-dailog-box-example-using.html
thanks
G.Yassen

Font management from the server-side

Similar Messages

Maybe you are looking for