Font Size in Character Mode Report

Hi ,
I have to print a report in a pre printed Stationary, which has tabular columns The columns are little bit small . when i have bigger data say value like 9999999.45 it over prints on the pre printed text. is it possible to reduce the size of the data at these places and be normal in other parts of the report.
i.e. Font size reduced inside the tabular column and normal for the remaining part of the report
Will appreciate the help

Font size in character mode report cannot be control through Oracle Report.
 
You can use report .prt file or manually set the printer to print character in small size.
 
Raj 
www.oraclebrains.com<a>
 POWERED by the people, to the people and for the people WHERE ORACLE IS PASSION.

Similar Messages

Controlling Font Size in Character Mode Reports

Hi,
The default Font size of Character mode Reports is 12. I want to reduce the font size from 12 to 8 .How to go about it.The printer codes mentioned in reports Documentation only talk about other attributes like Bold etc.Also the documentation gave the impression that The fontsize can only be controlled for Bitmap reports.Kindly help me out.
Thanks in advance.
Regards
Deepak

Deepak:
The font size for character reports is based in the printer size characters, there are: 10, 12 15 20 etc.
I believe that you want is a smaller character, try to configure your printer with condensed font in the panel of the printer, if you can't do that, try send printer codes to the printer via printer definition file.
For the printer code that you need, check the user's manual of the printer to know what code is that you need.
Look for commands in your manual
Good luck.
Ennio

Character mode report font size

i am using oracle 10g DS, and i have created character mode report as discribed in report builder help.
i have set font to
courier new (central europien), regular, 8
as descibed in help "10. Choose Format > Font, and select the font, style, and size that most closely
approximates the character-mode font. For example, Courier, Regular, 12
points.
but my output font on printed page is pritty big.
how can i set size of font printed, it seems to me that this setting has no affect?
also i dont get all the caracet displaud corectly, is this set in uifont.ali conf file
thanks and regards
rade

can anybody help me with this?
i have read that font size for character mode reports can be set in prt files.
i am using dflt.prt
i want to change font size to eg. 8 and to print font condensed, but i was enable to find any online manual how to do this, please advise me or supply url with relevant manual for editing prt files.
thanks and regards
rade

Character mode report no new line after header.

I am using Reports 6i. I have a character mode report with a header and body. I am outputing it as a .cvs file. The problem is that there is no live feed after the header. This means when I load the .csv file into excel the first row has the headers and the first data record, after that is it OK. Eatch row in the spreadsheet has a single data record/row.
any ideas?
ben

can anybody help me with this?
i have read that font size for character mode reports can be set in prt files.
i am using dflt.prt
i want to change font size to eg. 8 and to print font condensed, but i was enable to find any online manual how to do this, please advise me or supply url with relevant manual for editing prt files.
thanks and regards
rade

Reports 6i - character mode report - to reduce font size of field

HI, friends,
I am using Developer 6i with windows xp platform.
In reports how to change the font size of a perticular field in the layout.
In character mode report it is not possible to change the font size directly.
I tried using the properties Printer code before ,printer code after i.e for e.g by giving the values
printer code before - &1, printer code after - &1. But on printing the report on paper there is no change
in font size.
what to do? should i change any thing in printer files like .PRT files?? if so how?
or Any altenate method??
plz suggest.
with thanks
GMS

HI, I My self writing , who created this question, as I got sucess in changing the font size.
my dflt.prt in printer folder has the following,
printer "dflt"
height 46
width 130
after page control(L)
return control(M)
linefeed control(J)
code "1" esc "G"
code "2" esc "H"
code "3" esc "4"
code "4" esc "5"
code "5" esc "W1"
code "6" esc "W0"
code "7" esc "C"
code "8" control(O)
code "9" control(R)
I am able to increase the font size using code &5 and & 6 for the fileds or lables in report.
But how to reduce the font size ???
which code should I use in printer file. Our dot matrix printer is of type EPSON.

Problem in Character Mode Report (Urgent)

Dear All
i m designing a character mode report
and when i preview it ,,, it will display
different report font which is big in size
and width so it is not fit in the designed columns
can any one help me ,, y this problem is exist
though i m using Dot matrix printer EPSON DFX-8500
printer.

Hi..
If you are directly giving Print from previewer..you need to set printer to 10 cpi (if you want bigger font) and 12 dpi to compress the larger font..
CPI is character per inch so in one inch 10 chr or 12 chr can fir acc to setting.
If you are uploading file on Oracle Apps then you need to set fonts if needed in concurrent manager,printer setting,Style,fonts ..
"But the hardware setting is vewry imp..set the font in DRAFT mode"..
tarak desai
[email protected]

Warning Msg: Character Mode report is being opened as a Bit-mapped report

Hi All,
I am opening a Oracle Standard Report in Oracle Apps "INVISMMX", while opening it shows the below warning message:
"Character Mode report is being opened as a Bit-mapped report"
What is the reason for this?
How can I open this report in ASCII mode itself?
Thanks,
Gowri

I believe Oracle Reports by default will open a report as a bit-mapped report. You can change the poperties of the report to make it a character mode report by:
1. If this is a new report, in the Object Navigator, click the Reports node,
then click in the toolbar.
2. Double-click the properties icon next to the report node to display
the Property Palette.
3. Under the report node, set the width and height properties as desired:
for example, 11 (or 15) width x 8.5 height for landscape or 8.5 width x 11
(or 15) height for portrait.
4. Under the Character Mode node:
a. Set Design In Character Units to Yes.
b. Set the report width and report height to the appropriate
character-mode dimensions for the report, such as, 132 (or 180)
width x 66 height for landscape or 102 width x 85 (or 116) height
for portrait.
5. In the Object Navigator, expand the Data Model node, then the System
Parameters node.
6. Double-click the MODE properties icon to display the Property Palette.
7. Under the Parameter node, set the initial value for property to Character.
8. In the Object Navigator, double-click on the Layout Model node icon.
9. In the Layout Model view, choose FormatLayout OptionsRulers to display
the Ruler Settings dialog box.
10. Set Units to Character Cells and Number of Snap Points Per Grid Spacing
to 1. Click OK.
11. Click View in the menu bar and make sure that Snap to Grid is checked.
12. Choose Tools Preferences to display the Preferences dialog box.
13. On the Preferences page, set Horizontal Interfield to 1 and Vertical
Interfield to 0. Click OK.
14. Choose Format Font, and select the font, style, and size that most
closely approximates the character-mode font (such as, Courier,
Regular, 12 point).

URGENT: Problem in printing Character Mode Report in Chinese Version

Hello,
I am working with Reports 6i. i have developed one Character mode report. This report is working and printing fine in Windows 2000 Server (English Version). But, this report is not working properly in Windows 2000 Professional (Traditional Chinese Version) where i have compiled report in Chinese Version Machine. And, i am getting the Preview properly. Main problem is at the time of printing. I am using EPSON LQ - 2070 Dot Matrix Printer.
Please help me on this issue.
Thanks in advance.
S.Sudhakar Sankar.

Try printing to file first and ensure that the output is correct in something like "notepad" with the appropriate font.

Character mode report with 0 KB

There is one more problem , which we are facing now, the character mode reports are now coming with 0kb size, we are using the orarrp.exe for remote printing utility. If same report is generated using desformat as PDF, then it comes.
OS:Win 2k
AS:9i AS R2
Using ORARRP for report generation.

In the Layout Model, Header Section or Main Section or Trailer Section's properties according to which section you are referring to.
I think this is new with Reports 6i.

Character mode report cuts off last character on a line

Reports 9i, Windows 2003 Server. Printing character mode reports to IBM 6400 printer. I have a variable text column (multi line) and randomly the last character on a line gets cutoff. I'm using Courier 10 as my font. It is only 1 character that ever cuts cutoff. Any ideas? I'm desperate.
Tom

Hi,
change the reports height& width for landscape /portait.
and go to edit margin in layout.
see the layout and move to left if it has lot of gap in left side.
we can get correct output if the right side border is upto 8.2.
try with this.
--Basava.s

How to open a Character mode report in report designer 2.5

I am trying to open a character mode reoprt in Report Designer 2.5 and .. getting an error message:
Waring: Character-mode report 'XYZ' is being opened as bit-mapped report.
Warning: Page width of report '<report name>' changed to fit the font for a character cell. Might be a consequence of font-mapping.
Is thier any way to open Character-mode report in Report Designer 2.5
Report is designed for AR module.
Thanks,

ACCOUNTING SYSTEM
2006-2007 From Date : 01-JUL-06
Printed On : Friday August 31 2007 11:13 AM To Date : 30-SEP-07
G A/C. Code 99-99-9999 Description: xxxxxxxxxxxxx H
-- DOC. # -- -- DATE -Chq/Slip# ---------- N A R R A T I O N -- -- DEBIT -- -- CREDIT -- -- BALANCE --
Opening Balance: -999,999,999.00 Cr.
G *** Total *** 0.00 0.00 -999,999,999.00H
================= ================= =================
when i run character mode report in browser then display this output properly
but sir problem is that when i print the report
G(use for bold)
is not working
means not print in bold format in printer
same character print G
do you have any idea when i print through browser to printer G for bold purpose its work to printer ?

Character mode report and Report Width & Height

Hi
I need to print a report on a pre-printed pay slip which is 4" height x 9" width.
May i know what value should i set for these parameter?
Report Level: Unit of measurement: Inch
Report Level: Design in Character Units: Yes
Layout Model, Main Section: Width: 9, Height: 4
Layout Model, Character Mode: Report Width: 132, Report Height: 24
Apps SRW driver: width: 132, height: 24
If i need to print the character with 15cpi, is the value of 24 for the height (above) correct?
What should be the value to set for Ruler Settings, character cell size: horizontal & vertical?
Thanks
Ung

Could it be because A4 is actually 11.5" by 8.5" ?
Message was edited by:
Dave Hemming
In fact the ISO standard is 8.3" × 11.7". 8.5" x 11" is "Letter", which nobody uses any more.

How to send a character mode report from Oracle Form 10g to a printer.

how sending a character mode report from Oracle 10g report to a printer.
I'm sending to a printer located in the network
i have theses parameter report
desformat = prtname
desname=??????
destype= ?????
mode=character
i would like to preview the report before to send to a printer
slds

ACCOUNTING SYSTEM
2006-2007 From Date : 01-JUL-06
Printed On : Friday August 31 2007 11:13 AM To Date : 30-SEP-07
G A/C. Code 99-99-9999 Description: xxxxxxxxxxxxx H
-- DOC. # -- -- DATE -Chq/Slip# ---------- N A R R A T I O N -- -- DEBIT -- -- CREDIT -- -- BALANCE --
Opening Balance: -999,999,999.00 Cr.
G *** Total *** 0.00 0.00 -999,999,999.00H
================= ================= =================
when i run character mode report in browser then display this output properly
but sir problem is that when i print the report
G(use for bold)
is not working
means not print in bold format in printer
same character print G
do you have any idea when i print through browser to printer G for bold purpose its work to printer ?

Character Mode Report Print in Developer 6i

How i can create character mode reports for efficeint printing on dot matrix printers. I m not asking about the Character Mode Template(in the report wizard). And how i can convert the existing reports to Character Mode.
I am using Reports 6i.

Please post this question in the Rpeorts forum: Reports

How to Apply XML PArtial definition in Character mode report

Hi All
I want to apply some XML code definition in Character mode report The same XML is working fine in Bitmap
Plese give me some idea.

Any update? .please give some idea..... members..plz

Font Size in Character Mode Report

Similar Messages

Maybe you are looking for